Determine the network-layer packet type and fill it in for UNDI
clients.  This is required by some NBPs such as emBoot's winBoot/i.

This change requires refactoring the link-layer portions of the
gPXE netdevice API, so that it becomes possible to strip the
link-layer header without passing the packet up the network stack.

This patch adds support for the virtio-net adapter provided by KVM.

Written by Laurent Vivier <Laurent.Vivier@bull.net> for Etherboot.
Wrapped as legacy driver for gPXE by Stefan Hajnoczi
<stefanha@gmail.com>.

In tg3_chip_reset(), the PCI_EXPRESS change is taken from the Linux
tg3 driver. I am not sure what exactly it does (it is not documented
in the Linux driver), but it is necessary for the NIC to work
correctly.

Conjecture: The hardware issues 64-bit DMA writes of status descriptors,
which some PCI bridges seem to split into two 32-bit writes in reverse
order (i.e. dword 1 first).  This means that we sometimes observe a
partial status descriptor.  Add an explicit check to ensure that the
descriptor is complete before processing it.

Also ensure that the RDS consumer counter is incremented only when we
know that we have actually consumed an RX descriptor.

ns8390.c can produce four different drivers (one PCI, three ISA.)  The
ISA driver requires setting a few macros; do that by setting defines
in stub files instead of using src/Config.

Currently, all the ISA drivers are broken (they were not enabled by
default), so #if 0 them out.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Add an entry to tg3_nics for the BCM5789

Signed-off-by: Steven Walter <stevenrwalter@gmail.com>

From: Stefan Hajnoczi <stefanha@gmail.com>

From: Daniel Mealha Cabrita <dancab@utfpr.edu.br>

I've added tg3-5721 support for gPXE, the patch (against gpxe-0.9.3) is
attached to this message.

This chipset is present in HP ML150 G2 servers (possibly other HP machines
as well).

Drivers are not allowed to call printf().  Converted eprintf() to DBG(),
and removed spurious startup banner.

Fixed hardcoded inclusion of little_bswap.h

Use EIO rather than 1 as an error number.

Add ability for network devices to flag link up/down state to the
networking core.

Autobooting code will now wait for link-up before attempting DHCP.

IPoIB reflects the Infiniband link state as the network device link state
(which is not strictly correct; we also need a succesful IPoIB IPv4
broadcast group join), but is probably more informative.

Infiniband devices no longer block waiting for link-up in
register_ibdev().

Hermon driver needs to create an event queue and poll for link-up events.

Infiniband core needs to reread MAD parameters when link state changes.

IPoIB needs to cope with Infiniband link parameters being only partially
available at probe and open time.

03-19-2008, Hilko Bengen, Cleanups and fixes for newer cards
(successfully tested with 8110SC-d onboard NIC)

Russ Nelson sent an email requesting the license change to
GPL Version 2.

Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>

Arbel and Hermon cards both have multiple ports.  Add the
infrastructure required to register each port as a separate IB
device.  Don't yet register more than one port, since registration
will currently fail unless a valid link is detected.

Use ib_*_{set,get}_{drv,owner}data wrappers to access driver- and
owner-private data on Infiniband structures.

Stripped out trailing whitespace to keep git happy.

From: Geert Stappers <stappers@stappers.nl>
To: etherboot-developers@lists.sourceforge.net
Subject: [Etherboot-developers] 3c90x polling again [patch]
Date: Thu, 29 Nov 2007 09:22:36 +0100
User-Agent: Mutt/1.5.16 (2007-06-11)

Hello,

gPXE didn't work on 3COM 905C Tornado cards for me.
It did transmit the DHCP request, but it didn't see the DHCP offer.

Adding debug print statements allready solved the problem.
Attached is a patch that has a cleaner delay then print statements.
The core of it is
-    for(i=0;i<40000;i++);
+    mdelay(1);

There was no research if the change is about a longer delay
or about code NOT being optimized away. It works for me   :-)

Cheers
Geert Stappers

e1000 should now work in VMware.

driver's probe() routine fills in in nic->irqno.  This is so that
non-interrupt-capable legacy drivers which set nic->irqno=0 will end
up reporting IRQ#0 via PXENV_UNDI_GET_INFORMATION; this in turn means
that the calling PXE NBP will (should) hook the timer interrupt, and
everything will sort of work.

The e1000_irq() routine should (per mcb30) do enable on non-zero,
disable on zero.  This is not consistent in all drivers, so I'll
wait to update it when doing a global sweep.

This needs to be done manually because if the irq() routine is
implemented then we want something like "nic->irqno = pci->irqno;",
else we do "nic->irqno = 0;" nic->ioaddr may also need to be set
carefully.

Also added local variables to end of many files, for emacs indentation
to match kernel style (tab does 8 space indent).

Cleanups for e1000.c.

I have successfully booted DOS via iSCSI and PXELINUX via TFTP with this
version of the e1000 driver.

There may still be an issue with memory handling, since it seems to
die ungracefully when ARP packets come in after loading a kernel.
Something to debug.

autonegotiation still needs work.  receive is not working yet.

any rewrite.

DBG_PRINTF() and assert().