Shorter NACK packets take less time to construct and spew out less
debug output, and there's a limit to how useful it is to send a
complete missing-block list anyway; if the loss rate is high then
we're going to have to retransmit an updated missing-block list
anyway.

Also add pretty debugging output to show the list of requested blocks.

slam_parse_multicast_address() was failing to strip the initial "/"
from the URI path.

We never set up specific multicast filters; native drivers will ask
the card to receive all multicast packets.  The only way to achieve
this via the UNDI API is to enable promiscuous mode.

Tested against the mini-slamd server located in contrib/mini-slamd
with a single client, on a lossy network.

UDP sockets can be used for multicast, at which point it becomes
plausible that we could receive packets that aren't destined for us
but that still match on a port number.

Delete ELF as a generic image type.  The method for invoking an
ELF-based image (as well as any tables that must be set up to allow it
to boot) will always depend on the specific architecture.  core/elf.c
now only provides the elf_load() function, to avoid duplicating
functionality between ELF-based image types.

Add arch/i386/image/elfboot.c, to handle the generic case of 32-bit
x86 ELF images.  We don't currently set up any multiboot tables, ELF
notes, etc.  This seems to be sufficient for loading kernels generated
using both wraplinux and coreboot's mkelfImage.

Note that while Etherboot 5.4 allowed ELF images to return, we don't.
There is no callback mechanism for the loaded image to shut down gPXE,
which means that we have to shut down before invoking the image.  This
means that we lose device state, protection against being trampled on,
etc.  It is not safe to continue afterwards.

This "+" should be removed when a tarball release is done.

Revert "Use .SECONDARY instead of .PRECIOUS for bin/%.tmp targets."

This reverts commit de29e5a39c.

.SECONDARY doesn't seem to work properly with the target patterns of
implicit rules.  In particular, a "make clean ; make bin/rtl8139.dsk"
will correctly leave the bin/rtl8139.dsk.tmp file present when .PRECIOUS
is used, but not when .SECONDARY is used.

This is slightly irritating since we don't want the
"do-not-delete-if-interrupted" semantics of .PRECIOUS, but it seems to be
the best compromise.

See http://etherboot.org/wiki/dev/gdbstub for documentation.

During development it is often handy to change the config.h options from
their defaults, for example to enable debugging features.

To prevent accidental commits of debugging config.h changes, mdc
suggested having a config-local.h that is excluded from source control.
This file acts as a temporary config.h and can override any of the
defaults.

This commit is an attempt to implement the config-local.h feature.

The config.h file now has the following as its last line:
/* @TRYSOURCE config-local.h */

The @TRYSOURCE directive causes config-local.h to be included at that
point in the file.  If config-local.h does not exist, no error will be
printed and parsing will continue as normal.  Therefore, mkconfig.pl is
"trying" to "source" config-local.h.

The GDBSYM config.h option was an attempt at QEMU GDB debugging.  I have
removed the code since it is unused and may confuse people wanting to
use the GDB stub.

Maintain state for the advertised window length, and only ever increase
it (instead of calculating it afresh on each transmit).  This avoids
triggering "treason uncloaked" messages on Linux peers.

Respond to zero-length TCP keepalives (i.e. empty data packets
transmitted outside the window).  Even if the peer wouldn't otherwise
expect an ACK (because its packet consumed no sequence space), force an
ACK if it was outside the window.

We don't yet generate TCP keepalives.  It could be done, but it's unclear
what benefit this would have.  (Linux, for example, doesn't start sending
keepalives until the connection has been idle for two hours.)

When the embedded image is a script, the unregister_image() performed by
image/script.c corrupts memory, since image/embedded.c omitted the call
to register_image().

This is the first bug fixed using Stefan Hajnoczi's gdb stub for gPXE.

Return the most appropriate of EACCES, EPERM, ENODEV, ENOTSUP, EIO or
EINVAL depending on the exact error returned by the target, rather than
just always returning EPERM.

Also, ensure that error strings exist for these errors.

The ROM prefix now prompts the user to enter the gPXE shell during POST;
this allows for configuring gPXE without needing to attempt to boot from
it.  (It also slows down system boot by three seconds per gPXE ROM, but
hey.)

This is apparently a certain OEM's requirement for option ROMs.

This allows multiple gPXE ROMs in a system to be disambiguated at boot
time; the PCI ID will show up in the boot menu for a BBS-compliant BIOS.

Make sure parser doesn't choke on line with space at end.

Add a PHP script to act as a web interface for looking up error codes.

Various specification documents disagree about the byte ordering of
UUIDs.  However, SMBIOS seems to use the standard in which everything is
in network-endian order.

This doesn't affect anything sent on the wire; only what gets printed on
the screen when the "uuid" variable is displayed.

From: Stefan Hajnoczi <stefanha@gmail.com>

From: Daniel Mealha Cabrita <dancab@utfpr.edu.br>

I've added tg3-5721 support for gPXE, the patch (against gpxe-0.9.3) is
attached to this message.

This chipset is present in HP ML150 G2 servers (possibly other HP machines
as well).

From: Viswanath Krishnamurthy <viswa.krish@gmail.com>

The current ipv4 incorrectly checks the IP address for multicast address.
This causes valid IPv4 unicast address to be trated as multicast address

For e.g if the PXE/tftp server IP address is 192.168.4.XXX where XXX is
224 or greater, it gets treated as multicast address and a ethernet
multicast address is sent out on the wire causing timeouts

Some EMC targets will fail if we advertise that we can authenticate with
CHAP, but the target is configured to allow unauthenticated access to that
target.  We advertise AuthMethod=CHAP,None; the target should (I think)
select AuthMethod=None for unprotected targets.  IETD does this, but an
EMC Celerra NS83 doesn't.

Fix by offering only AuthMethod=None if the user hasn't supplied a
username and password; this means that we won't be offering CHAP
authentication unless the user is expecting to use it (in which case the
target is presumably configured appropriately).

Many thanks to Alessandro Iurlano <alessandro.iurlano@gmail.com> for
reporting and helping to diagnose this problem.

ROMs will refuse to build unless pci_vendor_id and pci_device_id are
defined.  We probably ought to fix up the Makefile (and the ROM prefix) so
that they're required only for PCI ROMs, but this will do for now.

Drivers are not allowed to call printf().  Converted eprintf() to DBG(),
and removed spurious startup banner.

Fixed hardcoded inclusion of little_bswap.h

Use EIO rather than 1 as an error number.

Add ability for network devices to flag link up/down state to the
networking core.

Autobooting code will now wait for link-up before attempting DHCP.

IPoIB reflects the Infiniband link state as the network device link state
(which is not strictly correct; we also need a succesful IPoIB IPv4
broadcast group join), but is probably more informative.

Event queue doorbells must use UAR pages 0-127 depending on event queue
number; other doorbells must use pages 128+ (and we choose to use page
128).

Infiniband devices no longer block waiting for link-up in
register_ibdev().

Hermon driver needs to create an event queue and poll for link-up events.

Infiniband core needs to reread MAD parameters when link state changes.

IPoIB needs to cope with Infiniband link parameters being only partially
available at probe and open time.

PXE is a catch-all image format with no signature checks.  If an
unsupported image file is loaded, it will be treated as a PXE image.  In
most cases, the image will be too large to be loaded as a PXE image (which
has to fit in base memory), so the error returned to the user will be that
the segment could not fit within the memory region.

Add an explicit check to pxe_image.c to reject images larger than base
memory with ENOEXEC.

Add ENOEXEC to the error string table.

03-19-2008, Hilko Bengen, Cleanups and fixes for newer cards
(successfully tested with 8110SC-d onboard NIC)

gPXE is not compliant with the HTTP/1.1 specification (RFC 2616),
since it lacks support for "Transfer-Encoding: chunked".  gPXE is,
however, compliant with the HTTP/1.0 specification (RFC 1945), which
does not require "Transfer-Encoding: chunked" to be supported.

The only HTTP/1.1 feature that gPXE uses is the "Host:" header, but
servers universally accept that one from HTTP/1.0 clients as an
optional extension (it is obligatory for HTTP/1.1).  gPXE does not,
for example, appear to support connection caching.  Advertising as a
HTTP/1.0 client will typically make the server close the connection
immediately upon sending the last data, which is actually beneficial
if we aren't going to keep the connection alive anyway.

In particular, expose the system UUID as a setting ("smbios/uuid").

The PXE spec is (as usual) unclear on precisely when ProxyDHCPREQUESTs
should be issued.  We adapt the following, slightly paranoid approach:

  If an offer contains an IP address, then it is a normal DHCPOFFER.

  If an offer contains an option #60 "PXEClient", then it is a
  ProxyDHCPOFFER.  Note that the same packet can be both a normal
  DHCPOFFER and a ProxyDHCPOFFER.

  After receiving the normal DHCPACK, if we have received a
  ProxyDHCPOFFER, we unicast a ProxyDHCPREQUEST back to the ProxyDHCP
  server on port 4011.  If we time out waiting for a ProxyDHCPACK, we
  treat this as a non-fatal error.

This avoids confusing other code by insisting that we have e.g. a
filename consisting of 128 zero bytes.

Add documentation for the FILE_EXEC and FILE_CHECK_API extension
calls, and update the documentation for the FILE_READ call.