iPXE debug logging doesn't support %u. This commit replaces it with
%d in virtio-pci debug format strings.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some of the regions may end up being unmapped, either because they are
optional or because the attempt to map them has failed. Region types
starting at 0 didn't make it easy to test for this condition.
This commit bumps all valid region types up by 1 with 0 having the
implicit 'unmapped' meaning.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[time] Allow system clock to be adjusted at runtime
Provide a mechanism to allow an arbitrary adjustment to be applied to
all subsequent calls to time().
Note that the underlying clock source (e.g. the RTC clock) will not be
changed; only the time as reported within iPXE will be affected.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
ARM64 has a weaker memory order model than x86. The missing memory
barrier caused phy initialization notification to be delayed beyond
the link-wait timeout (15 secs).
Signed-off-by: Leendert van Doorn <leendert@paramecium.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tcp] Send TCP keepalives on idle established connections
In some circumstances, intermediate devices may lose state in a way
that temporarily prevents the successful delivery of packets from a
TCP peer. For example, a firewall may drop a NAT forwarding table
entry.
Since iPXE spends most of its time downloading files (and hence purely
receiving data, sending only TCP ACKs), this can easily happen in a
situation in which there is no reason for iPXE's TCP stack to generate
any retransmissions. The temporary loss of connectivity can therefore
effectively become permanent.
Work around this problem by sending TCP keepalives after a period of
inactivity on an established connection.
TCP keepalives usually send a single garbage byte in sequence number
space that has already been ACKed by the peer. Since we do not need
to elicit a response from the peer, we instead send pure ACKs (with no
garbage data) in order to keep the transmit code path simple.
Originally-implemented-by: Ladi Prosek <lprosek@redhat.com>
Debugged-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[pci] Support systems with multiple PCI root bridges
Extend the 16-bit PCI bus:dev.fn address to a 32-bit seg:bus:dev.fn
address, assuming a segment value of zero in contexts where multiple
segments are unsupported by the underlying data structures (e.g. in
the iBFT or BOFM tables).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[libc] Always use a non-zero seed for the (non-crypto) RNG
The non-cryptographic RNG implemented by random() has the property
that a seed value of zero will result in a generated sequence of
all-zero values. This situation can arise if currticks() returns zero
at start of day.
Work around this problem by falling back to a fixed non-zero seed if
necessary.
This has no effect on the separate DRBG used by cryptographic code.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Fix build error with perl >= 5.23.2:
Can't redeclare "my" in "my" at ./util/parserom.pl line 160
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[efi] Expose DHCP packets via the Apple NetBoot protocol
Mac OS X uses non-standard EFI protocols to obtain the DHCP packets
from the UEFI firmware.
Originally-implemented-by: Michael Kuron <m.kuron@gmx.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[dhcp] Fix definitions for x86_64 and EFI BC client architectures
There has been a longstanding disagreement between RFC4578 and the
IANA "Processor Architecture Types" registry. RFC4578 section 2.1
defines type 7 as "EFI BC" and type 9 as "EFI x86-64"; the IANA
registry quotes RFC4578 as its source but has these values erroneously
swapped. The EDK2 codebase uses the IANA values.
As of March 2016, RFC4578 has been modified by an errata to match the
values as recorded in the IANA registry.
Fix our definitions to match the consensus values.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some UEFI keyboard drivers are blissfully unaware of the existence of
either Ctrl key, and will report "Ctrl-<key>" as just "<key>". This
breaks substantial portions of the iPXE user interface.
Work around these broken UEFI drivers by allowing "ESC <key>" to be
used as a substitute for "Ctrl-<key>".
Tested-by: Dreamcat4 <dreamcat4@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some HTTP/2 servers send the header "Connection: upgrade, close". This
currently causes iPXE to fail due to the unrecognised "upgrade" token.
Fix by ignoring any unrecognised tokens in the "Connection" header.
Reported-by: Ján ONDREJ (SAL) <ondrejj@salstar.sk>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This backport is from linux kernel upstream commit 83d6f1f ("ath9k:
fix buffer overrun for ar9287").
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The raw cycle counter at PMCCNTR_EL0 works in qemu but seems to always
read as zero on physical hardware (tested on Juno r1 and Cavium
ThunderX), even after ensuring that PMCR_EL0.E and PMCNTENSET_EL0.C
are both enabled.
Use CNTVCT_EL0 instead; this seems to count at a lower resolution
(tens of CPU cycles), but is usable for profiling.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[efi] Guard against GetStatus() failing to return a NULL TX buffer
The UEFI specification requires the EFI_SIMPLE_NETWORK_PROTOCOL
GetStatus() method to set TxBuf to NULL if there are no transmit
buffers to recycle.
Some implementations (observed with Lan9118Dxe in EDK2) fill in TxBuf
only when there is a transmit buffer to recycle, which leads to large
numbers of "spurious TX completion" errors.
Work around this problem by initialising TxBuf to NULL before calling
the GetStatus() method.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[libc] Avoid implicit assumptions about potentially-optimised memcpy()
Do not assume that an architecture-specific optimised memcpy() will
have the same properties as generic_memcpy() in terms of handling
overlapping regions.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[arm] Avoid instruction references to symbols defined via ".equ"
When building for 64-bit ARM, some symbol references may be resolved
via an "adrp" instruction (to obtain the start of the 4kB page
containing the symbol) and a separate 12-bit offset. For example
(taken from the GNU assembler documentation):
adrp x0, foo
ldr x0, [x0, #:lo12:foo]
We occasionally refer to symbols defined via mechanisms that are not
directly visible to gcc. For example:
extern char some_magic_symbol[];
__asm__ ( ".equ some_magic_symbol, some_magic_expression" );
The subsequent use of the ":lo12:" prefix on such magically-defined
symbols triggers an assertion failure in the assembler.
This problem seems to affect only "private_key_len" in the current
codebase. Fix by storing this value as static data; this avoids the
need to provide the value as a literal within the instruction stream,
and so avoids the problematic use of the ":lo12:" prefix.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[efi] Use a timer event to generate the currticks() timer
We currently use the EFI_CPU_ARCH_PROTOCOL's GetTimerValue() method to
generate the currticks() timer, calibrated against a 1ms delay from
the boot services Stall() method.
This does not work on ARM platforms, where GetTimerValue() is an empty
stub which just returns EFI_UNSUPPORTED.
Fix by instead creating a periodic timer event, and using this event
to increment a current tick counter.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown