WinPE's pxeboot.n12 takes the BufferLimit returned by gPXE (indicating
the size of gPXE's internal DHCP packet buffers) and erroneously passes
it in as BufferSize (indicating the size of pxeboot.n12's DHCP packet
buffer).  If these don't match, then pxeboot.n12 ends up instructing gPXE
to overwrite parts of its data segment.

Change gPXE's internal DHCP packet buffers to be exactly
sizeof(BOOTPLAYER_t) bytes to work around this problem.

The generate-by-PCI-device-ID rules (bin/pci_VVVV_DDDD.rom) are generally
used for building actual ROM images to be burned, and the burning
utilities generally run under some DOS variant.  Change the filename from
pci_VVVV_DDDD.rom to VVVVDDDD.rom so that it is compatible with the DOS
8.3-character filename limit.

This allows pxelinux to execute arbitrary gPXE commands.  This is
remarkably unsafe (not least because some of the commands will assume
full ownership of memory and do nasty things like edit the e820 map
underneath the calling pxelinux), but it does allow access to the
"sanboot" command.

RFC 4390 provides for the DHCP client identifier to contain the link-layer
hardware type and MAC address when the MAC address exceeds 16 bytes.
However, the hardware type field is only 8 bits; we were assuming 16 bits.

Arbel and Hermon cards both have multiple ports.  Add the
infrastructure required to register each port as a separate IB
device.  Don't yet register more than one port, since registration
will currently fail unless a valid link is detected.

Use ib_*_{set,get}_{drv,owner}data wrappers to access driver- and
owner-private data on Infiniband structures.

Pull out common code for handling management datagrams from arbel.c
and hermon.c into infiniband.c.

Add port number to struct ib_device.

Add open(), close() and mad() methods to struct ib_device_operations.

Deleting bin/deps after "make veryclean" keeps deps from being
regenerated in the tarball.

Added 'install' and 'configure' targets for those who are used
to other build setups.

Stripped out trailing whitespace to keep git happy.

As written, if the if the UNDI ISR call clobbers the upper halves of
any of the GPRs (which by convention it is permitted to do, and by
paranoia should be expected to do) then nothing in the interrupt
handler will recover the state.

Additionally, save/restore %fs and %gs out of sheer paranoia - it's a
cheap enough operation, and may prevent problems due to poorly written
UNDI stacks.

Since we don't know what the UNDI code does, it is safest to
save/restore %eflags even though the lower half of %eflags is
automatically saved by the interrupt itself.

As written, if the if the UNDI ISR call clobbers the upper halves of
any of the GPRs (which by convention it is permitted to do, and by
paranoia should be expected to do) then nothing in the interrupt
handler will recover the state.

Additionally, save/restore %fs and %gs out of sheer paranoia - it's a
cheap enough operation, and may prevent problems due to poorly written
UNDI stacks.

  Allow port numbers in iSCSI redirection.

  Wait for SCSI status, not just the final data-in (which may be followed
  by an explicit SCSI Response PDU if the S bit is not set).

stored DHCP packets.

separate xfer method.

Add missing .alloc_iob entries to several xfer_interface_operations
structures.

their equivalent DHCP-option-specified values.

stappers and xl0 pointed out that gnu make sets some variables, so ?=
is ineffective in some cases where we use it.. Cross-compilation
requires that some variables can be overridden in the
src/$(ARCH)/Config file, so include that file _after_ utility program
variables are set.

src/bin/%.tmp files can be useful for debugging, so let's keep them.

From: Geert Stappers <stappers@stappers.nl>
To: etherboot-developers@lists.sourceforge.net
Subject: [Etherboot-developers] 3c90x polling again [patch]
Date: Thu, 29 Nov 2007 09:22:36 +0100
User-Agent: Mutt/1.5.16 (2007-06-11)

Hello,

gPXE didn't work on 3COM 905C Tornado cards for me.
It did transmit the DHCP request, but it didn't see the DHCP offer.

Adding debug print statements allready solved the problem.
Attached is a patch that has a cleaner delay then print statements.
The core of it is
-    for(i=0;i<40000;i++);
+    mdelay(1);

There was no research if the change is about a longer delay
or about code NOT being optimized away. It works for me   :-)

Cheers
Geert Stappers

e1000 should now work in VMware.

driver's probe() routine fills in in nic->irqno.  This is so that
non-interrupt-capable legacy drivers which set nic->irqno=0 will end
up reporting IRQ#0 via PXENV_UNDI_GET_INFORMATION; this in turn means
that the calling PXE NBP will (should) hook the timer interrupt, and
everything will sort of work.

The e1000_irq() routine should (per mcb30) do enable on non-zero,
disable on zero.  This is not consistent in all drivers, so I'll
wait to update it when doing a global sweep.

This needs to be done manually because if the irq() routine is
implemented then we want something like "nic->irqno = pci->irqno;",
else we do "nic->irqno = 0;" nic->ioaddr may also need to be set
carefully.

Also added local variables to end of many files, for emacs indentation
to match kernel style (tab does 8 space indent).

for "echo -e" on the host system.

_textdata_link_addr, _load_addr and _max_align in the linker scripts.
A bug in some versions of ld causes segfaults if the DEFINED() macro
is used in a linker script *and* the -Map option to ld is present.

We don't currently need to override any of these values; if we need to
do so in future then the solution will probably be to always specify
the values on the ld command line, and have the linker script not
define them at all.

suitable "echo -e" substitute.