Remove *_fill_nic() calls, and directly set nic->ioaddr and nic->irqno .

This needs to be done manually because if the irq() routine is
implemented then we want something like "nic->irqno = pci->irqno;",
else we do "nic->irqno = 0;" nic->ioaddr may also need to be set
carefully.

Also added local variables to end of many files, for emacs indentation
to match kernel style (tab does 8 space indent).

src/drivers/net/3c509-eisa.c

  */
 static int el3_eisa_probe ( struct nic *nic, struct eisa_device *eisa ) {
 	
-	enable_eisa_device ( eisa );
-	eisa_fill_nic ( nic, eisa );
 
+        nic->ioaddr = eisa->ioaddr;
+        nic->irqno = 0;
+        enable_eisa_device ( eisa );
+        
 	/* Hand off to generic t5x9 probe routine */
 	return t5x9_probe ( nic, ISA_PROD_ID ( PROD_ID ), ISA_PROD_ID_MASK );
 }
 	 el3_eisa_probe, el3_eisa_disable );
 
 ISA_ROM ( "3c509-eisa","3c509 (EISA)" );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/3c515.c

 
 	/* Direct copy from Beckers 3c515.c removing any ISAPNP sections */
 
-	isapnp_fill_nic ( nic, isapnp );
-
 	nic->ioaddr = isapnp->ioaddr;
 	nic->irqno = isapnp->irqno;
 	activate_isapnp_device ( isapnp );

src/drivers/net/3c529.c

 static int t529_probe ( struct nic *nic, struct mca_device *mca ) {
 
 	/* Retrieve NIC parameters from MCA device parameters */
-	mca_fill_nic ( nic, mca );
 	nic->ioaddr = ( ( mca->pos[4] & 0xfc ) | 0x02 ) << 8;
 	nic->irqno = mca->pos[5] & 0x0f;
 	printf ( "3c529 board found on MCA at %#hx IRQ %d -",
 	 t529_probe, t529_disable );
 
 ISA_ROM( "3c529", "3c529 == MCA 3c509" );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/3c595.c

 	eth_nic_base = pci->ioaddr;
 
 	nic->irqno  = 0;
-	pci_fill_nic ( nic, pci );
 	nic->ioaddr = pci->ioaddr;
 
 	GO_WINDOW(0);
 /*
  * Local variables:
  *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
  * End:
  */
-

src/drivers/net/3c90x.c

 
     adjust_pci_device(pci);
 
-    pci_fill_nic ( nic, pci );
-
     nic->ioaddr = pci->ioaddr;
     nic->irqno = 0;
 
 
 DRIVER ( "3C90X", nic_driver, pci_driver, a3c90x_driver,
 	 a3c90x_probe, a3c90x_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/amd8111e.c

 	struct amd8111e_priv *lp = &amd8111e;
 	unsigned long mmio_start, mmio_len;
 
-	pci_fill_nic ( nic, pdev );
+        nic->ioaddr = pdev->ioaddr;
+        nic->irqno  = pdev->irq;
 	
 	mmio_start = pci_bar_start(pdev, PCI_BASE_ADDRESS_0);
 	mmio_len = pci_bar_size(pdev, PCI_BASE_ADDRESS_0);
 
 DRIVER ( "AMD8111E", nic_driver, pci_driver, amd8111e_driver,
 	 amd8111e_probe, amd8111e_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/cs89x0.c

 	return 1;
 }
 
-static int cs89x0_probe ( struct nic *nic, struct isa_device *isa ) {
+static int cs89x0_probe ( struct nic *nic, struct isa_device *isa __unused ) {
 	int      i, result = -1;
 	unsigned rev_type = 0, isa_cnf, cs_revision;
 	unsigned short eeprom_buff[CHKSUM_LEN];
 
-	isa_fill_nic ( nic, isa );
 	nic->ioaddr &= ~1; /* LSB = 1 indicates a more aggressive probe */
-
 	eth_nic_base = nic->ioaddr;
 
 	/* get the chip type */
 			else printf("\ncs: BUG: isa_config is %d\n", i); }
 		eth_irqno = i; }
 	
+        nic->irqno = eth_irqno;
+
 	/* Retrieve and print the ethernet address. */
 	for (i=0; i<ETH_ALEN; i++) {
 		nic->node_addr[i] = ((unsigned char *)eeprom_buff)[i];
 /*
  * Local variables:
  *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
  * End:
  */
-

src/drivers/net/davicom.c

   dev_id  = pci->device;
   ioaddr  = pci->ioaddr;
 
-  pci_fill_nic ( nic, pci );
+  nic->ioaddr = pci->ioaddr;
+  nic->irqno = 0;
 
   /* wakeup chip */
   pci_write_config_dword(pci, 0x40, 0x00000000);
 
 DRIVER ( "DAVICOM", nic_driver, pci_driver, davicom_driver,
 	 davicom_probe, davicom_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/depca.c

 	long	sum, chksum;
 
 	nic->irqno    = 0;
-	isa_fill_nic ( nic, isa );
 	nic->ioaddr   = isa->ioaddr;
 
 	for (i = 0, j = 0, sum = 0; j < 3; j++) {
 ISA_ROM ( "depca", "Digital DE100 and DE200" );
 
 #endif
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/dmfe.c

 	dmfe_reset(nic);
 
 	nic->irqno  = 0;
-	pci_fill_nic ( nic, pci );
 	nic->ioaddr = pci->ioaddr;
 
 	/* point to NIC specific routines */
 
 DRIVER ( "DMFE/PCI", nic_driver, pci_driver, dmfe_driver,
 	 dmfe_probe, dmfe_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/eepro.c

 	const char *name;
 
 	nic->irqno  = 0;
-	isa_fill_nic ( nic, isa );
 	nic->ioaddr = isa->ioaddr;
 
 	station_addr.saddr[2] = read_eeprom(nic->ioaddr,2);
 	 eepro_probe, eepro_disable );
 
 ISA_ROM ( "eepro", "Intel Etherexpress Pro/10" );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/eepro100.c

  *            leaves the 82557 initialized, and ready to recieve packets.
  */
 
-static int eepro100_probe ( struct nic *nic, struct pci_device *p ) {
+static int eepro100_probe ( struct nic *nic, struct pci_device *pci ) {
 
 	unsigned short sum = 0;
 	int i;
 	   be careful not to access beyond this array */
 	unsigned short eeprom[16];
 
-	if (p->ioaddr == 0)
+	if (pci->ioaddr == 0)
 		return 0;
-	pci_fill_nic ( nic, p );
-	adjust_pci_device(p);
+
+	adjust_pci_device(pci);
+
+        nic->ioaddr = pci->ioaddr;
+        nic->irqno = pci->irq;
+
 	ioaddr = nic->ioaddr;
 
 	if ((do_eeprom_cmd(EE_READ_CMD << 24, 27) & 0xffe0000)
 
 DRIVER ( "EEPRO100", nic_driver, pci_driver, eepro100_driver,
 	 eepro100_probe, eepro100_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/epic100.c

        Epic cards in slot order. */
 
     ioaddr = pci->ioaddr;
+
     nic->irqno  = 0;
-    pci_fill_nic ( nic, pci );
     nic->ioaddr = pci->ioaddr & ~3;
 
     /* compute all used static epic100 registers address */
 
 DRIVER ( "EPIC100", nic_driver, pci_driver, epic100_driver,
 	 epic100_probe, epic100_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/forcedeth.c

 	printf("forcedeth.c: Found %s, vendor=0x%hX, device=0x%hX\n",
 	       pci->driver_name, pci->vendor, pci->device);
 
-	pci_fill_nic ( nic, pci );
+        nic->ioaddr = pci->ioaddr;
+        nic->irqno = 0;
 
 	/* point to private storage */
 	np = &npx;
 
 DRIVER ( "forcedeth", nic_driver, pci_driver, forcedeth_driver,
 	 forcedeth_probe, forcedeth_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/mtd80x.c

     if (pci->ioaddr == 0)
 	    return 0;
 
-    pci_fill_nic ( nic, pci );
     adjust_pci_device(pci);
 
+    nic->ioaddr = pci->ioaddr;
+    nic->irqno = 0;
+
     mtdx.nic_name = pci->driver_name;
     mtdx.dev_id = pci->device;
     mtdx.ioaddr = nic->ioaddr;

src/drivers/net/ns83820.c

 		return 0;
 
 	nic->irqno  = 0;
-	pci_fill_nic ( nic, pci );
 	nic->ioaddr = pci->ioaddr & ~3;
 
 	/* disable interrupts */
 
 DRIVER ( "NS83820/PCI", nic_driver, pci_driver, ns83820_driver,
 	 ns83820_probe, ns83820_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/ns8390.c

 
 #endif /* INCLUDE_NS8390 */
 
+#endif
+
 /*
  * Local variables:
  *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
  * End:
  */
-
-
-#endif

src/drivers/net/pcnet32.c

 	       pci->driver_name, pci->vendor, pci->device);
 
 	nic->irqno  = 0;
-	pci_fill_nic ( nic, pci );
 	nic->ioaddr = pci->ioaddr & ~3;
 
 	/* reset the chip */
 
 DRIVER ( "PCNET32/PCI", nic_driver, pci_driver, pcnet32_driver,
 	 pcnet32_probe, pcnet32_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/prism2_pci.c

   hfa384x_t *hw = &hw_global;
   uint32_t membase = 0; /* Prism2.5 Memory Base */
 
-  pci_fill_nic ( nic, pci );
   pci_read_config_dword( pci, PRISM2_PCI_MEM_BASE, &membase);
   membase &= PCI_BASE_ADDRESS_MEM_MASK;
   hw->membase = (uint32_t) phys_to_virt(membase);
   printf ( "Prism2.5 has registers at %#lx\n", hw->membase );
+
   nic->ioaddr = hw->membase;
+  nic->irqno = 0;
 
   return prism2_probe ( nic, hw );
 }
 DRIVER ( "Prism2/PCI", nic_driver, pci_driver, prism2_pci_driver,
 	 prism2_pci_probe, prism2_pci_disable );
 
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/prism2_plx.c

 static int prism2_plx_probe ( struct nic *nic, struct pci_device *pci ) {
   hfa384x_t *hw = &hw_global;
   
-  pci_fill_nic ( nic, pci );
-
   /* Find and intialise PLX Prism2 card */
   if ( ! prism2_find_plx ( hw, pci ) ) return 0;
   nic->ioaddr = hw->iobase;
-
+  nic->irqno  = 0;
   return prism2_probe ( nic, hw );
 }
 
 DRIVER ( "Prism2/PLX", nic_driver, pci_driver, prism2_plx_driver,
 	 prism2_plx_probe, prism2_plx_disable );
 
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/r8169.c

 	}
 
 	r8169_reset(nic);
+
 	/* point to NIC specific routines */
-	nic->nic_op	= &r8169_operations;
-	pci_fill_nic ( nic, pci );
-	nic->irqno = pci->irq;
+	nic->nic_op = &r8169_operations;
+
+	nic->irqno  = pci->irq;
 	nic->ioaddr = ioaddr;
-	return 1;
 
+	return 1;
 }
 
 //======================================================================================================
 
 DRIVER ( "r8169/PCI", nic_driver, pci_driver, r8169_driver,
 	 r8169_probe, r8169_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/sis900.c

         return 0;
 
     nic->irqno  = 0;
-    pci_fill_nic ( nic, pci );
     nic->ioaddr = pci->ioaddr;
+
     ioaddr  = pci->ioaddr;
     vendor  = pci->vendor;
     dev_id  = pci->device;
 
 DRIVER ( "SIS900", nic_driver, pci_driver, sis900_driver,
 	 sis900_probe, sis900_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/smc9000.c

    int              i;
 
    nic->irqno  = 0;
-   isa_fill_nic ( nic, isa );
    nic->ioaddr = isa->ioaddr;
 
    /*
 
 /*
  * Local variables:
- *  c-basic-offset: 3
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
  * End:
  */

src/drivers/net/sundance.c

 
 	/* point to NIC specific routines */
 	nic->nic_op	= &sundance_operations;
-	pci_fill_nic ( nic, pci );
-	nic->irqno = pci->irq;
+
+	nic->irqno  = pci->irq;
 	nic->ioaddr = BASE;
 
 	return 1;
 
 DRIVER ( "SUNDANCE/PCI", nic_driver, pci_driver, sundance_driver,
 	 sundance_probe, sundance_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/tg3.c

 
 	adjust_pci_device(pdev);
 
-	pci_fill_nic ( nic, pdev );
 	nic->irqno  = 0;
+        nic->ioaddr = pdev->ioaddr;
 
 	/* Find power-management capability. */
 	pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
 
 DRIVER ( "TG3", nic_driver, pci_driver, tg3_driver,
 	 tg3_probe, tg3_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/tlan.c

 		return 0;
 
 	nic->irqno  = 0;
-	pci_fill_nic ( nic, pci );
 	nic->ioaddr = pci->ioaddr;
 
 	BASE = pci->ioaddr;
 
 DRIVER ( "TLAN/PCI", nic_driver, pci_driver, tlan_driver,
 	 tlan_probe, tlan_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/tulip.c

         return 0;
 
     ioaddr         = pci->ioaddr;
-    pci_fill_nic ( nic, pci );
     nic->ioaddr    = pci->ioaddr & ~3;
     nic->irqno     = 0;
 
 
 DRIVER ( "Tulip", nic_driver, pci_driver, tulip_driver,
 	 tulip_probe, tulip_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/via-rhine.c

 
     if (!pci->ioaddr)
 	return 0;
+
     rhine_probe1 (nic, pci, pci->ioaddr, pci->device, -1);
 
     adjust_pci_device ( pci );
+
     rhine_reset (nic);
+
     nic->nic_op	= &rhine_operations;
-    pci_fill_nic ( nic, pci );
+
     nic->irqno	  = pci->irq;
     nic->ioaddr   = tp->ioaddr;
+
     return 1;
 }
 
 	 rhine_probe, rhine_disable );
 
 /* EOF via-rhine.c */
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */

src/drivers/net/w89c840.c

     if (p->ioaddr == 0)
         return 0;
 
-    pci_fill_nic ( nic, p );
+    nic->ioaddr = p->ioaddr;
     nic->irqno  = 0;
 
-
 #if defined(W89C840_DEBUG)
     printf("winbond-840: PCI bus %hhX device function %hhX: I/O address: %hX\n", p->bus, p->devfn, ioaddr);
 #endif
 
 DRIVER ( "W89C840F", nic_driver, pci_driver, w89c840_driver,
 	 w89c840_probe, w89c840_disable );
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */