Both methods disabled packet tx and rx just to have it enabled again
by calling a3c90x_reset().
Fixed by disabling tx and rx after the call to a3c90x_reset().

Tested by booting Ubuntu intrepid(8.10) directly from gPXE and pxelinux.
Tested on 3c905, 3c905B, 3c905C.

Signed-off-by: Marty Connor <mdc@etherboot.org>

The hardware address is an intrinsic property of the hardware, while
the link-layer address can be changed at runtime.  This separation is
exposed via APIs such as PXE and EFI, but is currently elided by gPXE.

Expose the hardware and link-layer addresses as separate properties
within a net device.  Drivers should now fill in hw_addr, which will
be used to initialise ll_addr at the time of calling
register_netdev().

Add FILE_LICENCE declarations to almost all files that make up the
various standard builds of gPXE.

Signed-off-by: Michael Brown <mcb30@etherboot.org>

Modified-by: Michael Brown <mcb30@etherboot.org>
Signed-off-by: Michael Brown <mcb30@etherboot.org>

This is a major rewrite of the legacy etherboot 3c90x driver using the
gPXE API for much improved performance over the legacy driver it
replaces.

This driver has been tested on 3c905, 3c905B, and 3c905C cards.

Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Marty Connor <mdc@etherboot.org>
Tested-by: Marty Connor <mdc@etherboot.org>
Tested-by: Daniel Verkamp <daniel@drv.nu>

Signed-off-by: Marty Connor <mdc@etherboot.org>

We now have two implementations for the timer API: one using the
time-of-day counter at 40:70 and one using RDTSC.  Both make use of
timer2_udelay().

Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>

From: Geert Stappers <stappers@stappers.nl>
To: etherboot-developers@lists.sourceforge.net
Subject: [Etherboot-developers] 3c90x polling again [patch]
Date: Thu, 29 Nov 2007 09:22:36 +0100
User-Agent: Mutt/1.5.16 (2007-06-11)

Hello,

gPXE didn't work on 3COM 905C Tornado cards for me.
It did transmit the DHCP request, but it didn't see the DHCP offer.

Adding debug print statements allready solved the problem.
Attached is a patch that has a cleaner delay then print statements.
The core of it is
-    for(i=0;i<40000;i++);
+    mdelay(1);

There was no research if the change is about a longer delay
or about code NOT being optimized away. It works for me   :-)

Cheers
Geert Stappers

This needs to be done manually because if the irq() routine is
implemented then we want something like "nic->irqno = pci->irqno;",
else we do "nic->irqno = 0;" nic->ioaddr may also need to be set
carefully.

Also added local variables to end of many files, for emacs indentation
to match kernel style (tab does 8 space indent).

not-yet-updated drivers to at least function.

Generic PCI code now handles 64-bit BARs correctly when setting
"membase"; drivers should need to call pci_bar_start() only if they want
to use BARs other than the first memory or I/O BAR.

Split rarely-used PCI functions out into pciextra.c.

Core PCI code is now 662 bytes (down from 1308 bytes in Etherboot 5.4).
284 bytes of this saving comes from the pci/pciextra split.

Cosmetic changes to lots of drivers (e.g. vendor_id->vendor in order to
match the names used in Linux).

I want to get to the point where any header in include/ reflects a
standard user-level header (e.g. a POSIX header), while everything that's
specific to gPXE lives in include/gpxe/.  Headers that reflect a Linux
header (e.g. if_ether.h) should also be in include/gpxe/, with the same
name as the Linux header and, preferably, the same names used for the
definitions.

perl -pi -0777 -e 's/^static struct \w+_driver (\w+) =\s*(\w+_DRIVER \()/${2} ${1},/msg' *.c

#!/usr/bin/perl -w -pi -0777

use strict;

( my $type ) = /find_(\w+?)_boot_device/ or die "Could not find type\n";

( my $disable ) = /\.disable\s*=\s*(\w+)/ or die "Could not locate disable\n";

s/(${disable}\s*\(\s*struct\s+nic\s+\*nic)(\s*\)\s*\{)(\s*)/${1}, struct ${type}_device \*${type} __unused${2}${3}nic_disable ( nic );${3}/s;

s/(${disable}\s*\(\s*struct\s+nic\s+\*nic)(\s*\)\s*;)/${1}, struct ${type}_device \*${type}${2}/g;

s/^\s*.disable\s*=\s*${disable}\s*,\s*?$//m;

s/(_probe\s*\(\s*)struct\s+dev\s+\*dev/${1}struct nic \*nic/g;

s/^\s*struct\s+nic\s+\*nic\s*=\s*nic_device\s*\(\s*dev\s*\)\s*;\s*?$//m;

s/^(\s*)(nic->(ioaddr|irqno)\s*=\s*${type})/${1}${type}_fill_nic ( nic, ${type} );\n${1}${2}/m;

since we probably shouldn't be doing this to arbitrary devices during a
PCI bus scan...

perl -pi -0777 -e 's/\s*?if\s*\(\s*!\s*find_pci_device.*?,\s*\&(\w+)\s*\)\s*\)\s*return\s*0;(.*BOOT_DRIVER\s*\(.*?,)(.*?\))/$2 find_pci_boot_device, $1,$3/sm' *.c

perl -pi -0777 -e 's/(_probe\s*\(\s*struct\s+dev.*?)(\s*\)\s*{.*?$)\s*struct pci_device.*?=\s*pci_device \( dev \);$/${1}, struct pci_device *pci${2}/ms' *.c

sis900 excluded from update

perl -pi -0777 -e 's/^(\s*)dev->disable(\s*)=\s*(\w+)_disable;\s*nic->poll\s*=\s*(\w+);\s*nic->transmit\s*=\s*(\w+);\s*nic->irq\s*=\s*(\w+);/static struct nic_operations ${3}_operations;\nstatic struct nic_operations ${3}_operations = {\n\t.connect\t= dummy_connect,\n\t.poll\t\t= $4,\n\t.transmit\t= $5,\n\t.irq\t\t= $6,\n\t.disable\t= ${3}_disable,\n};${1}nic->nic_op\t= &${3}_operations;/msg' *.c

perl -pi -0777 -e 's/_disable\s*\(\s*struct dev \*dev\s*\)\s*{\s*struct nic \*nic.*?$/_disable ( struct nic *nic ) {/ms' *.c

perl -pi -0777 -e 's/_disable\s*\(\s*struct dev \*dev(\s*__unused)?\)\s*{/_disable ( struct nic *nic$1 ) {/ms' *.c

perl -pi -0777 -e 's/_probe\s*\(\s*struct dev \*dev,\s*struct pci_device \*(\w+?)\s*\)\s*{(\s*)struct nic \*nic.*?$/_probe ( struct dev *dev ) {\n${2}struct nic *nic = nic_device ( dev );\n${2}struct pci_device *$1 = pci_device ( dev );/ms' *.c

perl -pi -0777 -e 's/static struct pci_driver (\w+) __pci_driver = {.*\.name\s*=\s*(\"\S+\").*\.probe\s*=\s*(\w+).*\.ids\s*=\s*(\w+).*\.class\s*=\s*(\w+).*?};/static struct pci_driver $1 =\n\tPCI_DRIVER ( $2, $4, $5 );\n\nBOOT_DRIVER ( $2, $3 );/ms' *.c

perl -pi -e 's/(PCI_DRIVER \(.*, )0 \);/${1}PCI_NO_CLASS );/' *.c