[console] Try to avoid problems caused by keycode 86
The "us" keyboard layout contains a mapping for keycode 86 (which
seems not to correspond to any physical key on many US keyboards) to
the ASCII character '<'. This mapping causes conflicts with the
mapping for keycode 51, which also maps (with shift) to '<'.
Change the keyboard mapping generator to choose the lowest keycode for
each ASCII character as indicating the relevant mapping to use, on the
basis that a lower keycode roughly indicates a "more normal" key. On
a German keyboard, which has keys for both keycode 51 and keycode 86
present, this causes '<' to be remapped to ';', which is a closer
match to typical user expectations.
Reported-by: Sven Dreyer <sven@dreyer-net.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
From a cursory examination, it appears as though the calculation of
tx_available is redundant, since eepro_transmit() waits for transmit
completion before returning anyway.
Reported-by: Ralph Giles <giles@thaumas.net>
Tested-by: Ralph Giles <giles@thaumas.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[e1000] Remove unused variable when ICR register is simply cleared
On reset and close, the ICR register is read to clear any pending
interrupts, but the value is simply ignored. Avoid assigning the
value to a variable, to inhibit a warning from gcc 4.6.
Also fix a potential race condition in reset routines which clear
interrupts before disabling them.
Reported-by: Ralph Giles <giles@thaumas.net>
Tested-by: Ralph Giles <giles@thaumas.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[igbvf] Remove some unused Linux-specific portions of igbvf.h
These unused portions trigger a compiler warning under gcc 4.6, due to
the ambiguity over the "page" field in struct igbvf_buffer.
Reported-by: Ralph Giles <giles@thaumas.net>
Tested-by: Ralph Giles <giles@thaumas.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Avoid spurious address comparison warnings in gcc 4.6
A construction such as "assert ( ptr != NULL )" seems to trigger a
false positive warning in gcc 4.6 if the value of "ptr" is known at
compile-time to be non-NULL. Use -Wno-address to inhibit this
warning.
Reported-by: Ralph Giles <giles@thaumas.net>
Tested-by: Ralph Giles <giles@thaumas.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Avoid spurious unused-but-set-variable warnings in gcc 4.6
The __table_entries() construction seems to trigger a false positive
warning in gcc 4.6 relating to variables which are set but never
used. Add __attribute__((unused)) to inhibit this warning.
Reported-by: Ralph Giles <giles@thaumas.net>
Tested-by: Ralph Giles <giles@thaumas.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The keymap files, though autogenerated, are checked in to version
control and should be considered as source files. They should never
be automatically rebuilt.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Inspired by LILO's keytab-lilo.pl, genkeymap.pl uses "loadkeys -b" to
obtain a Linux keyboard map, and generates a file keymap_xx.c in
hci/keymap.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[efi] Mark SNP devices as children of EFI PCI device
Re-open the EFI_PCI_IO_PROTOCOL specifying an Attributes value of
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER. This causes the SNP devices to
be marked as children of the EFI PCI device (as shown in the "devtree"
command).
On at least one IBM blade system, this is required in order to have
the relevant drivers automatically attach to the SNP controller at
device creation time.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[romprefix] Use correct size for PMM allocation of image source block
iPXE allocates its first PMM block using the image source length,
which is rounded up to the nearest 16-byte paragraph. It then copies
in data of a length calculated from the ROM size, which is
theoretically less than or equal to the image source length, but is
rounded up to the nearest 512-byte sector. This can result in copying
beyond the end of the allocated PMM block, which can corrupt the PMM
data structures (and other essentially arbitrary areas of memory).
Fix by rounding up the image source length to the nearest 512-byte
sector before using it as the PMM allocation length.
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Reported-by: Jarrod Johnson <jarrod.b.johnson@gmail.com>
Reported-by: Itay Gazit <itayg@mellanox.co.il>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
In a virtual environment such as qemu, we can legitimately receive
packets less than 64 bytes in length, such as ARP replies. These are
currently discarded, causing most IPv4 communication to fail.
Fix by ignoring the RFDShort bit when receiving packets.
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[bios] Use INT 16,11 instead of INT 16,01 to check for keystrokes
INT 16,01 will discard some extended keystrokes on some BIOSes, making
it impossible for iPXE to detect keypresses such as F12. Fix by using
INT 16,11 instead.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A script that downloads a new image using imgdownload() with the
action register_and_replace_image() can now be freed immediately
before the replacement image is executed. This functionality is not
yet exposed via an iPXE command.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[image] Move the register_and_{select|boot}_image() functions to imgmgmt.c
These functions are used only as the "action" parameters to
imgdownload() or imgfetch(), and so belong in imgmgmt.c rather than
image.c
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[prefix] Allow iPXE's own command line to be executed as a script
Some prefixes (e.g. .lkrn) allow a command line to be passed in to
iPXE. At present, this command line is ignored.
If a command line is provided, treat it as an embedded script (without
an explicit "#!ipxe" magic marker). This allows for patterns of
invocation such as
title iPXE
kernel /boot/ipxe.lkrn dhcp && \
sanboot iscsi:10.0.4.1::::iqn.2010-04.org.ipxe.dolphin:storage
Here GRUB is instructed to load ipxe.lkrn with an embedded script
equivalent to
#!ipxe
dhcp
sanboot iscsi:10.0.4.1::::iqn.2010-04.org.ipxe.dolphin:storage
This can be used to effectively vary the embedded script without
having to rebuild ipxe.lkrn.
Originally-implemented-by: Dave Hansen <dave@sr71.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "prompt" command exposes the prompt() function, allowing a script
to prompt the user for a keypress and take action depending on the
result. For example
#!ipxe
prompt -k 0x197e -t 2000 Press F12 to boot from network... || exit
autoboot
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown