Signed-off-by: Michael Brown <mcb30@etherboot.org>

The PXE debugging messages have remained pretty much unaltered since
Etherboot 5.4, and are now difficult to read in comparison to most of
the rest of gPXE.

Bring the pxe_undi debug messages up to normal gPXE standards.

Add FILE_LICENCE declarations to almost all files that make up the
various standard builds of gPXE.

Modified-by: Michael Brown <mcb30@etherboot.org>
Signed-off-by: Michael Brown <mcb30@etherboot.org>

Eliminate the potential for mismatches between table names and the
table entry data type by incorporating the data type into the
definition of the table, rather than specifying it explicitly in each
table accessor method.

Intel's C compiler (icc) chokes on the zero-length arrays that we
currently use as part of the mechanism for accessing linker table
entries.  Abstract away the zero-length arrays, to make a port to icc
easier.

Introduce macros such as for_each_table_entry() to simplify the common
case of iterating over all entries in a linker table.

Represent table names as #defined string constants rather than
unquoted literals; this avoids visual confusion between table names
and C variable or type names, and also allows us to force a
compilation error in the event of incorrect table names.

In tg3_chip_reset(), the PCI_EXPRESS change is taken from the Linux
tg3 driver. I am not sure what exactly it does (it is not documented
in the Linux driver), but it is necessary for the NIC to work
correctly.

03-19-2008, Hilko Bengen, Cleanups and fixes for newer cards
(successfully tested with 8110SC-d onboard NIC)

names.

Add "dev" pointer in struct net_device to tie network interfaces back to a
hardware device.

Force natural alignment of data types in __table() macros.  This seems to
prevent gcc from taking the unilateral decision to occasionally increase
their alignment (which screws up the table packing).

typical build will now include 880 bytes of PCI support code, compared to
2327 bytes in Etherboot 5.4.

(There is a slight cost of around 5 extra bytes per access to a
non-constant config space address; this should be an overall win.
Driver-specific accesses will usually be to constant addresses, for
which there is no additional cost.)

Generic PCI code now handles 64-bit BARs correctly when setting
"membase"; drivers should need to call pci_bar_start() only if they want
to use BARs other than the first memory or I/O BAR.

Split rarely-used PCI functions out into pciextra.c.

Core PCI code is now 662 bytes (down from 1308 bytes in Etherboot 5.4).
284 bytes of this saving comes from the pci/pciextra split.

Cosmetic changes to lots of drivers (e.g. vendor_id->vendor in order to
match the names used in Linux).

I want to get to the point where any header in include/ reflects a
standard user-level header (e.g. a POSIX header), while everything that's
specific to gPXE lives in include/gpxe/.  Headers that reflect a Linux
header (e.g. if_ether.h) should also be in include/gpxe/, with the same
name as the Linux header and, preferably, the same names used for the
definitions.

thinks they are.
Other bus drivers modified for consistency.

changes.

initial device, and will also allow for e.g. a device menu to be presented
to the user.

all return unsigned quantities.

quickly.

link time to accommodate whatever bus objects are included.

*other* than the main boot device.