There are currently four places within the codebase that use a
heuristic to guess the "boot network device", with varying degrees of
success.  Add a feature to the net device core to maintain a list of
open network devices, in order of opening, and provide a function
last_opened_netdev() to retrieve the most recently opened net device.
This should do a better job than the current assortment of
guess_boot_netdev() functions.

Some Infiniband cards will not be as accommodating as the Arbel and
Hermon cards in providing enough space for us to push a fake extra
header at the start of the received packet.  We must therefore make do
with squeezing enough information to identify source and destination
addresses into the two bytes of padding within a genuine IPoIB
link-layer header.

netdev_rx_err() and netdev_tx_complete_err() get passed the error
code, but currently use it only in debug messages.

Retain error numbers and frequencey counts for up to
NETDEV_MAX_UNIQUE_ERRORS (4) different errors for each of TX and RX.
This allows the "ifstat" command to report the reasons for TX/RX
errors in most cases, even in non-debug builds.

EFI requires us to be able to specify the source address for
individual transmitted packets, and to be able to extract the
destination address on received packets.

Take advantage of this to rationalise the push() and pull() methods so
that push() takes a (dest,source,proto) tuple and pull() returns a
(dest,source,proto) tuple.

Multicast hashing is an ugly overlap between network and link layers.
EFI requires us to provide access to this functionality, so move it
out of ipv4.c and expose it as a method of the link layer.

Currently this length is set at device allocation time, and is never
changed.

Determine the network-layer packet type and fill it in for UNDI
clients.  This is required by some NBPs such as emBoot's winBoot/i.

This change requires refactoring the link-layer portions of the
gPXE netdevice API, so that it becomes possible to strip the
link-layer header without passing the packet up the network stack.

Add ability for network devices to flag link up/down state to the
networking core.

Autobooting code will now wait for link-up before attempting DHCP.

IPoIB reflects the Infiniband link state as the network device link state
(which is not strictly correct; we also need a succesful IPoIB IPv4
broadcast group join), but is probably more informative.

Add a configuration settings block for each net device.  This will
provide the parent scope for settings applicable only to that network
device (e.g. non-volatile options stored on the NIC, options obtained via
DHCP, etc.).

Expose the MAC address as a setting.

safe dropping of the netdev ref by the driver while other refs still
exist.

Add netdev_irq() method.  Net device open()/close() methods should no
longer enable or disable IRQs.

Remove rx_quota; it wasn't used anywhere and added too much complexity
to implementing correct interrupt-masking behaviour in pxe_undi.c.

via UNDI API and also by ifstat command; may be useful for debugging.

structures.

DHCP still broken and #if 0'd out.

Achieved via Perl using:

perl -pi -e 's/pk_buff/io_buffer/g; s/Packet buffer/I\/O buffer/ig; ' \
	-e 's/pkbuff\.h/iobuf.h/g; s/pkb_/iob_/g; s/_pkb/_iob/g; ' \
	-e 's/pkb/iobuf/g; s/PKB/IOB/g;'

names.

Add "dev" pointer in struct net_device to tie network interfaces back to a
hardware device.

Force natural alignment of data types in __table() macros.  This seems to
prevent gcc from taking the unilateral decision to occasionally increase
their alignment (which screws up the table packing).

of alloc_pkb() exhaustion when e.g. an iSCSI-booted DOS session is left
idle for a long time at the C:\ prompt and builds up a huge packet
backlog.

(which will need us to wait for TX completions).

Added debug autocolourisation to netdevice.c

Call netdevice's poll() and transmit() methods only when device is open.

net_device is unregistered.

Added a large number of missing calls to free_pkb().  In the case of UDP,
no received packets were ever freed, which lead to memory exhaustion
remarkably quickly once pxelinux started up.

In general, any function with _rx() in its name which accepts a pk_buff
*must* either call free_pkb() or pass the pkb to another _rx() function
(e.g. the next layer up the stack).  Since the UDP (and TCP) layers don't
pass packet buffers up to the higher-layer protocols (the
"applications"), they must free the packet buffer after calling the
application's newdata() method.

Kill off the static single net device and move to proper dynamic
registration (which we need with the new device model).

Break the (flawed) assumption that all network-layer protocols can use
ARP; such network-layer protocols (i.e. IPv4) must now register as an ARP
protocol using ARP_NET_PROTOCOL() and provide a single method for checking
the existence of a local network-layer address.

take ownership of the packet, rather than doing so only if they return
success.  This breaks semantic compatibility with Linux's
hard_start_xmit() method, but means that we don't have to worry so much
about error cases.

Split mechanism of processing received packets (net_rx_process()) out
from policy (net_step()), preparatory to putting net_step() in a separate
object.

implementation allows for only one, and does so without compromising on
the efficiency of static allocation).

Link-layer protocols are cleanly separated from the device drivers.

Network-layer protocols are cleanly separated from individual network
devices.

Link-layer and network-layer protocols are cleanly separated from each
other.

it with metadata in the pkb structure.  This is required since UNDI will
want to be able to parse the link-layer header without destroying it.

separate from a network device (a link-layer concept).