For devices that start in a link-down state, the user will see a
message such as:
[Link status: The socket is not connected (http://ipxe.org/38086001)]
Waiting for link-up on net0...
This is potentially misleading, since it suggests that there is a
genuine problem. Add a dedicated error message for "link down",
giving instead:
[Link status: Down (http://ipxe.org/38086101)]
Waiting for link-up on net0...
Reported-by: Tal Aloni <tal.aloni.il@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The original EFI BOFM protocol has a design flaw that limits the size
of the table to 1kB, since the table is embedded within the
IBM_BOFM_DRIVER_CONFIGURATION_PROTOCOL structure. Version 2 of the
protocol works around this problem.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[forcedeth] Never change the NVREG_TRANSMITPOLL_MAC_ADDR_REV flag
iPXE operates the forcedeth NIC in promiscuous mode, and never changes
the unicast MAC address filter registers. We should not therefore set
the flag indicating (to other drivers loaded later) that the MAC
address order has already been corrected.
Reported-by: Tal Aloni <tal.aloni.il@gmail.com>
Tested-by: Tal Aloni <tal.aloni.il@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[forcedeth] Remove software unicast MAC address filter
The forcedeth driver currently implements unicast MAC address
filtering in software. This is almost invariably the wrong thing to
do (since the network stack must already be able to cope with unwanted
packets) and it breaks FCoE (which requires the card to operate in
promiscuous mode).
Also, the implementation is buggy: is_local_ether_addr() is used to
check for a locally-assigned Ethernet address (not to check for a
unicast address), and the current link-layer address is in
netdev->ll_addr, not netdev->hw_addr.
Fix by removing this code.
Reported-by: Tal Aloni <tal.aloni.il@gmail.com>
Tested-by: Tal Aloni <tal.aloni.il@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A scriptlet is a single iPXE command that can be stored in
non-volatile option storage and used to override the default
"autoboot" behaviour without having to reflash the iPXE image.
For example, a scriptlet could contain
autoboot || reboot
to instruct iPXE to reboot the system if booting fails.
Unlike an embedded image, the presence of a scriptlet does not inhibit
the initial "Press Ctrl-B..." prompt. This allows the user to recover
from setting a faulty scriptlet.
Originally-implemented-by: Glenn Brown <glenn@myri.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[cmdline] Expand settings within each command-line token individually
Perform settings expansion after tokenisation, and only at the point
of executing each command. This allows statements such as
dhcp && echo ${net0/ip}
to work correctly.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[cmdline] Allow ";" as an unconditional command separator
It is currently possible to construct a sequence of commands to be
executed regardless of success or failure using "|| &&" as the command
separator. (The "||" captures the failure case, the blank command
converts it to a success case.)
Allow ";" to be used as a more visually appealing (and
space-efficient) alternative.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[linux] Avoid unused-but-set variable warning in gcc 4.6
Temporary modification to prevent valgrind.h from breaking compilation
with gcc 4.6. When this problem is fixed upstream, a new and
unmodified copy of valgrind.h should be imported.
Signed-off-by: Thomas Miletich <thomas.miletich@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[forcedeth] Avoid unused-but-set variable warning in gcc 4.6
Avoid unused-but-set variable warning in gcc 4.6 which was introduced
by commit 9215b7f ("[forcedeth] Clear the MII link status register on
link status changes").
Signed-off-by: Thomas Miletich <thomas.miletich@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
An iPXE .exe image can be loaded from DOS. Tested using bin/ipxe.exe
to load a Linux kernel and simple initramfs from within MS-DOS 6.22.
(EDD must be disabled using the "edd=off" kernel parameter, since the
loaded kernel image has already overwritten parts of DOS' INT 13
wrapper.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[prefix] Avoid using base memory for temporary decompression area
In the unlikely (but observable) event that INT 15,88 returns less
memory above 1MB than is required for the temporary decompression
area, ignore it and use the 1MB point anyway.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[linux] Make malloc and linux_umalloc valgrindable
Make the allocators used by malloc and linux_umalloc valgrindable.
Include valgrind headers in the codebase to avoid a build dependency
on valgrind.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There is no need to explicitly call basename() to construct an image
name in imgfetch_core_exec(), since image_set_uri() will do so
automatically anyway (and will do so without getting confused by URIs
with query strings).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[netdevice] Mark devices as open only if opening succeeds
netdev_close() assumes that devices that are open are on the
open_list, which wasn't true if device specific opening failed.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "read" command allows a script to prompt a user to enter a
setting. For example:
echo -n Static IP address:
read net0/ip
Total cost: 17 bytes.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 6861304 ("[tcp] Handle out-of-order received packets")
introduced a regression in which ts_recent would not be updated until
the first packet is received in the ESTABLISHED state, i.e. the
timestamp from the SYN+ACK packet would be ignored. This causes the
connection to be dropped by strictly-conforming TCP peers, such as
FreeBSD.
Fix by delaying the timestamp window check until after processing the
received SYN flag.
Reported-by: winders@sonnet.com
Signed-off-by: Michael Brown <mcb30@ipxe.org>
bin/ipxe.lkrn is built anyway in order to create bin/ipxe.iso, so
there is no additional cost to including it within the default build.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[monojob] Avoid overflow when calculating percentage progress
Normalise the progress figures to ensure that multiplication by 100
(to produce a percentage) cannot result in integer overflow.
Reported-by: Sven Dreyer <sven@dreyer-net.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE documentation tends to refer to "settings" rather than "options",
since settings can be more general than DHCP options.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[undi] Cope with devices that erroneously claim not to use interrupts
Some PXE stacks advertise that interrupts are not supported, despite
requiring the use of interrupts. Attempt to cope with such cards
without breaking others by always hooking the interrupt, and using the
"interrupts supported" flag only to decide whether or not to wait for
an interrupt before calling PXENV_UNDI_ISR_IN_PROCESS.
The possible combinations are therefore:
1. Card generates interrupts and claims to support interrupts
iPXE will call PXENV_UNDI_ISR_IN_PROCESS only after an interrupt
has been observed. (This is required to avoid lockups in some PXE
stacks, which spuriously sulk if called before an interrupt has
been generated.)
Such a card should work correctly.
2. Card does not generate interrupts and does not claim to support
interrupts
iPXE will call PXENV_UNDI_ISR_IN_PROCESS indiscriminately, matching
the observed behaviour of at least one other PXE NBP (winBoot/i).
Such a card should work correctly.
3. Card generates interrupts but claims not to support interrupts
iPXE will call PXENV_UNDI_ISR_IN_PROCESS indiscriminately. An
interrupt will still result in a call to PXENV_UNDI_ISR_IN_START.
Such a card may work correctly.
4. Card does not generate interrupts but claims to support interrupts
Such a card will not work at all.
Reported-by: Jerry Cheng <jaspers.cheng@msa.hinet.net>
Tested-by: Jerry Cheng <jaspers.cheng@msa.hinet.net>
Reported-by: Mauricio Silveira <mauricio@livreti.com.br>
Tested-by: Mauricio Silveira <mauricio@livreti.com.br>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Improve the appearance of the "config" user interface by ensuring that
settings appear in some kind of logical order.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 5fbd020 ("[settings] Display canonical setting name in output
of "show" command") introduced a regression causing all setting
expansions (e.g. "${net0/mac}") to expand to an empty string.
Fix by returning the formatted value length from
fetchf_named_setting(), as expected by the caller.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Add hierarchy navigation in "config" user interface
Allow the user to browse through the settings block hierarchy.
Originally-implemented-by: Glenn Brown <glenn@myri.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Display only applicable settings in "config" user interface
Display only settings relevant to the current scope. For example,
"config net0" no longer displays SMBIOS settings, and "config smbios"
displays only SMBIOS settings.
Originally-implemented-by: Glenn Brown <glenn@myri.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Display canonical setting name in output of "show" command
Enable the "show" command to display the full, canonicalised name of
the fetched setting. For example:
iPXE> show mac
net0/mac:hex = 52:54:00:12:34:56
iPXE> dhcp && show ip
DHCP (net0 52:54:00:12:34:56)... ok
net0.dhcp/ip:ipv4 = 10.0.0.168
iPXE> show net0/6
net0.dhcp/dns:ipv4 = 10.0.0.6
Inspired-by: Glenn Brown <glenn@myri.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Expose settings_name(), shrink the unnecessarily large static buffer,
properly name root settings block, and simplify.
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Formalise notion of setting applicability
Expose a function setting_applies() to allow a caller to determine
whether or not a particular setting is applicable to a particular
settings block.
Restrict DHCP-backed settings blocks to accepting only DHCP-based
settings.
Restrict network device settings blocks to accepting only DHCP-based
settings and network device-specific settings such as "mac".
Inspired-by: Glenn Brown <glenn@myri.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[console] Try to avoid problems caused by keycode 86
The "us" keyboard layout contains a mapping for keycode 86 (which
seems not to correspond to any physical key on many US keyboards) to
the ASCII character '<'. This mapping causes conflicts with the
mapping for keycode 51, which also maps (with shift) to '<'.
Change the keyboard mapping generator to choose the lowest keycode for
each ASCII character as indicating the relevant mapping to use, on the
basis that a lower keycode roughly indicates a "more normal" key. On
a German keyboard, which has keys for both keycode 51 and keycode 86
present, this causes '<' to be remapped to ';', which is a closer
match to typical user expectations.
Reported-by: Sven Dreyer <sven@dreyer-net.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown