Add a PCI_CAP_ID_VNDR definition for the PCI standard "Vendor
Specific" capability ID.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The existence and usage of the BEV entry point is covered by the PnP
spec, not the BBS spec; the BBS spec merely describes a policy for
selecting the boot device order. iPXE should therefore check only for
a PnP BIOS in order to decide whether or not to hook INT19.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Fix broken build caused by implied dependency upon "perl"
Commit ea12dc0 ("[build] Avoid hard-coding the path to perl")
introduced a build failure for fully clean trees (e.g. after running
"make veryclean"), since the dependency upon $(PARSEROM) now includes
a dependency upon "perl" (which doesn't exist) rather than upon
"/usr/bin/perl" (which does exist).
There should of course be no dependency upon the perl binary at all;
the dependency should be upon "./util/parserom.pl" alone.
Fix by removing the $(PERL) from the definition of Perl-based utility
paths, and adding $(PERL) at the point of usage.
Reported-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The path "/usr/bin/perl" has been hard-coded since Etherboot 5.1, for
no discernible reason. Use just "perl" instead to fix the
inconsistency and allow building on systems with Perl installed
outside of /usr/bin.
Reported-by: Gabor Z. Papp <gzp@papp.hu>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[r8169] Remove driver cfg lookup, use pci_device_id->driver_data instead
This patch removes the cfg lookup made in the r8169 driver and
replaces it with equivalent information found in the driver_data field
of the pci_device_id structure.
Signed-off-by: Andrei Faur <da3drus@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The handshake record in TLS can contain multiple messages.
Originally-fixed-by: Timothy Stack <tstack@vmware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Since more reference-counted structures than embedded images might
want to mark themselves unfreeable, expose a dummy ref_no_free().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[interface] Allow for non-pass-through interface methods
xfer_vredirect() should not be allowed to propagate to a pass-through
interface. For example, when an HTTPS connection is opened, the
redirect message should cause the TLS layer to reopen the TCP socket,
rather than causing the HTTP layer to disconnect from the TLS layer.
Fix by allowing for non-pass-through interface methods, and setting
xfer_vredirect() to be one such method.
This is slightly ugly, in that it complicates the notion of an
interface method call by adding a "pass-through" / "non-pass-through"
piece of metadata. However, the only current user of xfer_vredirect()
is iscsi.c, which uses it only because we don't yet have an
ioctl()-style call for retrieving the underlying socket address.
The new interface infrastructure allows for such a call to be created,
at which time this sole user of xfer_vredirect() can be removed,
xfer_vredirect() can cease to be an interface method and become simply
a wrapper around xfer_vreopen(), and the concept of a non-pass-through
interface method can be reverted.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[interface] Convert all data-xfer interfaces to generic interfaces
Remove data-xfer as an interface type, and replace data-xfer
interfaces with generic interfaces supporting the data-xfer methods.
Filter interfaces (as used by the TLS layer) are handled using the
generic pass-through interface capability. A side-effect of this is
that deliver_raw() no longer exists as a data-xfer method. (In
practice this doesn't lose any efficiency, since there are no
instances within the current codebase where xfer_deliver_raw() is used
to pass data to an interface supporting the deliver_raw() method.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[interface] Convert all name-resolution interfaces to generic interfaces
Remove name-resolution as an interface type, and replace
name-resolution interfaces with generic interfaces supporting the
resolv_done() method.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[interface] Convert all job-control interfaces to generic interfaces
Remove job-control as an interface type, and replace job-control
interfaces with generic interfaces supporting the close() method.
(Both done() and kill() are absorbed into the function of close();
kill() is merely close(-ECANCELED).)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[interface] Expand object interface to allow for polymorphic interfaces
We have several types of object interface at present (data-xfer, job
control, name resolution), and there is some duplication of
functionality between them. For example, job_done(), job_kill() and
xfer_close() are almost isomorphic to each other.
This updated version of the object interface mechanism allows for each
interface to export an arbitrary list of supported operations.
Advantages include:
Operations methods now receive a pointer to the object, rather than
a pointer to the interface. This allows an object to, for example,
implement a single close() method that can handle close() operations
from any of its exposed interfaces.
The close() operation is implemented as a generic operation (rather
than having specific variants for data-xfer, job control, etc.).
This will allow functions such as monojob_wait() to be used to wait
for e.g. a name resolution to complete.
The amount of boilerplate code required in objects is reduced, not
least because it is no longer necessary to include per-interface
methods that simply use container_of() to derive a pointer to the
object and then tail-call to a common per-object method.
The cost of adding new operations is reduced; adding a new data-xfer
operation such as stat() no longer incurs the penalty of adding a
.stat member to the operations table of all existing data-xfer
interfaces.
The data-xfer, job control and name resolution interfaces have not yet
been updated to use the new interface mechanism, but the code will
still compile and run.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Standardise on using timer_init() to initialise an embedded retry
timer, to match the coding style used by other embedded objects.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Standardise on using ref_init() to initialise an embedded reference
count, to match the coding style used by other embedded objects.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This patch replaces the old pcnet32 driver with a new one that
uses iPXE's API.
Signed-off-by: Andrei Faur <da3drus@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[process] Hold reference to process during call to step()
It is conceivable that the process may terminate during the execution
of step(). If nothing else holds a reference to the containing
object, this would cause the object to be freed prior to returning
from step().
Add a ref_get()/ref_put() around the call to ->step() to prevent this
from happening.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
After changing the driver to refill after feed, if any error occurs a
non-contiguous empty buffer will be introduced in the ring due to my
reuse-buffer-when-error implementation.
Reported-by: Marty Connor <mdc@etherboot.org>
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a new network driver that consumes the EFI Simple Network
Protocol. Also add a bus driver that can find the Simple Network
Protocol that iPXE was loaded from; the resulting behavior is similar
to the "undionly" driver for BIOS systems.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Fix up the whitespace errors inadvertently introduced by the
last-minute rename from the internal QLogic codename to "qib7322".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
strerror() has not been able to use the PXE-only error table since
commit 9aa61ad ("Add per-file error identifiers") back in 2007.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[legal] Add FILE_LICENCE declarations to EFI header files
Autodetect the BSD licence statement in EFI header files, and add a
suitable FILE_LICENCE macro to the version imported into the iPXE
tree.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Now that the PACKED macro conflict is resolved, we can use an
unmodified import of the EFI header files (using
include/ipxe/efi/import.pl).
Synchronised to EDK2 SVN revision 10556.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Most of iPXE uses __attribute__((packed)) anyway, and PACKED conflicts
with an identically-named macro in the upstream EFI header files.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The README file was accidentally deleted in commit 2aad3fa ("[build]
Use weak definitions instead of weak declarations").
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The linker chooses to look for _start first and always picks
efidrvprefix.o to satisfy it (probably because it's earlier in the
archive) which causes a multiple definition error when the linker
later has to pick efiprefix.o for other symbols.
Fix by using EFI-specific TGT_LD_FLAGS with an explicit entry point.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Apart from format specifier fixes there are two changes in proper code:
- Change type of regs in skge_hw to unsigned long
- Cast result of sizeof in myri10ge to uint32_t
Both don't change anything for i386 and should be fine on x86_64.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[dhcp] Don't consider invalid offers to be duplicates
This fixes a regression in BOOTP support; since BOOTP requests often
have the `siaddr' field set to 0.0.0.0, they would be considered
duplicates of the first zeroed-out offer slot.
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Glenn Brown