This reverts commit 5ce16b03a1.

Use generic fields in struct device_description rather than assuming
that the struct device * is contained within a pci_device or
isapnp_device; this assumption is broken when using the undionly
driver.

Add PXENV_UNDI_SET_STATION_ADDRESS.

ISA 3c509 is currently non-functional, although the EISA (3c509-eisa) and
MCA (3c529) variants should build OK.

None of this code is yet tested.

names.

Add "dev" pointer in struct net_device to tie network interfaces back to a
hardware device.

Force natural alignment of data types in __table() macros.  This seems to
prevent gcc from taking the unilateral decision to occasionally increase
their alignment (which screws up the table packing).

way everything remains consistent if the probe() ends up creating child
devices.

defined in vsprintf.h.  (This may change, since vsprintf.h is a
non-standard name, but for now it's the one to use.)

There should be no need to include vsprintf.h just for DBG() statements,
since include/compiler.h forces it in for a debug build anyway.

typical build will now include 880 bytes of PCI support code, compared to
2327 bytes in Etherboot 5.4.

(There is a slight cost of around 5 extra bytes per access to a
non-constant config space address; this should be an overall win.
Driver-specific accesses will usually be to constant addresses, for
which there is no additional cost.)

Generic PCI code now handles 64-bit BARs correctly when setting
"membase"; drivers should need to call pci_bar_start() only if they want
to use BARs other than the first memory or I/O BAR.

Split rarely-used PCI functions out into pciextra.c.

Core PCI code is now 662 bytes (down from 1308 bytes in Etherboot 5.4).
284 bytes of this saving comes from the pci/pciextra split.

Cosmetic changes to lots of drivers (e.g. vendor_id->vendor in order to
match the names used in Linux).

I want to get to the point where any header in include/ reflects a
standard user-level header (e.g. a POSIX header), while everything that's
specific to gPXE lives in include/gpxe/.  Headers that reflect a Linux
header (e.g. if_ether.h) should also be in include/gpxe/, with the same
name as the Linux header and, preferably, the same names used for the
definitions.

initial device, and will also allow for e.g. a device menu to be presented
to the user.

since we probably shouldn't be doing this to arbitrary devices during a
PCI bus scan...

quickly.

Prevented find_pci_device() from being an endless loop.

(just build debugging versions of the relevant bus objects).

link time to accommodate whatever bus objects are included.

reverse order.

*other* than the main boot device.