- implemented hline/vline (part of wborder family)
- screen cursor now relocates at same time as window cursor when
  restoring after a non-wrapping function

Also trim another eight bytes from vsprintf.o.  :)

- fixes to wborder (same)
- addition of a few minor functions

enough to support both real IDE chipsets and AoE.

READ(16) is mandatory); we must use READ CAPACITY (10) first and then
use READ CAPACITY (16) if the READ CAPACITY (10) returns "out of range".

- added extern declarations for global vars
- removed comments from static inlines (too time consuming to do them
  all, considering all so far have been due to the ridiculous amount of
  redundancy within the API spec)
- removed a few more extern func decls for funcs that cannot be
  implemented at this time

the kernel), which encapsulates the information needed to refer to an
external buffer.  Under normal operation, this can just be a void *
equivalent, but under -DKEEP_IT_REAL it would be a segoff_t equivalent.

Use this concept to avoid the need for bounce buffers in int13.c,
which reduces memory usage and opens up the possibility of using
multi-sector reads.

Extend the block-device API and the SCSI block device implementation
to support multi-sector reads.

Update iscsi.c to use user buffers.

Move the obsolete portions of realmode.h to old_realmode.h.

MS-DOS now boots an order of magnitude faster over iSCSI (~10 seconds
from power-up to C:> prompt in bochs).

errors; still need to verify data integrity).

SCSI response PDUs are handled: status and sense data (if available) are
returned via the scsi_command structure.

Updated iSCSI session parameter usage.

declaration.

typical build will now include 880 bytes of PCI support code, compared to
2327 bytes in Etherboot 5.4.

(There is a slight cost of around 5 extra bytes per access to a
non-constant config space address; this should be an overall win.
Driver-specific accesses will usually be to constant addresses, for
which there is no additional cost.)

Generic PCI code now handles 64-bit BARs correctly when setting
"membase"; drivers should need to call pci_bar_start() only if they want
to use BARs other than the first memory or I/O BAR.

Split rarely-used PCI functions out into pciextra.c.

Core PCI code is now 662 bytes (down from 1308 bytes in Etherboot 5.4).
284 bytes of this saving comes from the pci/pciextra split.

Cosmetic changes to lots of drivers (e.g. vendor_id->vendor in order to
match the names used in Linux).

for use by malloc().

This breaks the image-loading code (which previously used the heap to
allocate the buffer for downloading the image), but that's not a major
concern since I'm going to tear out all the image formats within the next
couple of days anyway.  Byebye, NBI!  :)

Shaved around 100 bytes off vsprintf.o.  It's now 50 bytes smaller than
the old implementation and provides much more conformant semantics,
including the ability to return the number of characters that would have
been printed to the string had the buffer been big enough.  (iSCSI needs
this functionality).

implementation.

advantage of the fact that we have to have a permanently-resident block
in base memory.

closed() method with a reason code.

compile, even if it won't yet be safe.

take ownership of the packet, rather than doing so only if they return
success.  This breaks semantic compatibility with Linux's
hard_start_xmit() method, but means that we don't have to worry so much
about error cases.

Split mechanism of processing received packets (net_rx_process()) out
from policy (net_step()), preparatory to putting net_step() in a separate
object.

Yes, you really can do it in 65 bytes.

of them in one go.

EBADIMG has been replaced by ENOEXEC, and EIMGRET by ECANCELED.

crossings.

aligned blocks.

Moved header to include/malloc.h, since we now also provide the
POSIX-like malloc()/free() pair.

Not yet tested.

power-of-two up from a given constant via
  ( 1 << fls ( constant - 1 ) )

fls(), flsl(), ffs() and ffsl() appear in strings.h according to
POSIX.

even when __atribute__ (( unused )) is correctly set...

I want to get to the point where any header in include/ reflects a
standard user-level header (e.g. a POSIX header), while everything that's
specific to gPXE lives in include/gpxe/.  Headers that reflect a Linux
header (e.g. if_ether.h) should also be in include/gpxe/, with the same
name as the Linux header and, preferably, the same names used for the
definitions.

implementation allows for only one, and does so without compromising on
the efficiency of static allocation).

Link-layer protocols are cleanly separated from the device drivers.

Network-layer protocols are cleanly separated from individual network
devices.

Link-layer and network-layer protocols are cleanly separated from each
other.