[build] Pad .rom, .dsk, and .hd images to 512-byte boundaries
QEMU will silently round down a disk or ROM image file to the nearest
512 bytes. Fix by always padding .rom, .dsk and .hd images to the
nearest 512-byte boundary.
Originally-fixed-by: Stefan Hajnoczi <stefanha@gmail.com>
This replaces the gdbstub's polite NAK behavior with retransmission of
the current outstanding reply packet. It solves situations where gdb
and gPXE's gdbstub get out of sync due to the lack of flow control in
the gdb protocol spec.
Signed-off-by: Michael Brown <mcb30@etherboot.org>
The zbin compressor fixup utility rounds down file sizes before
calculating their difference. This produces incorrect values and may
cause truncated gPXE images to be loaded at boot.
The following example explains the problem:
ilen = 48 bytes (uncompressed input file)
olen = 17 bytes (compressed output file)
divisor = 16 bytes (paragraph granularity)
fixmeup = 3 paragraphs (value to fix up)
olen / divisor - ilen / divisor
= 1 - 3
= -2 paragraphs (old delta calculation)
( align ( olen, divisor ) - align ( ilen, divisor ) ) / divisor
= 2 - 3
= -1 paragraphs (new delta calculation)
If we perform the SUBx operation with old delta:
fixmeup + -2 = 1 paragraph gets loaded by the prefix
With the new delta:
fixmeup + -1 = 2 paragraphs get loaded by the prefix
The old delta calculation removes the last paragraph; the prefix will
load a truncated copy of gPXE into memory. We need to load 2
paragraphs since olen is 17 bytes. Loading only 1 paragraph (16
bytes) would truncate the last byte.
Signed-off-by: Michael Brown <mcb30@etherboot.org>
[pcbios] Don't use "lret $2" to return from an interrupt
Using "lret $2" to return from an interrupt causes interrupts to be
disabled in the calling program, since the INT instruction will have
disabled interrupts. Instead, patch CF on the stack and use iret to
return.
Interestingly, the original PC BIOS had this bug in at least one
place.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Michael Brown <mcb30@etherboot.org>
The "seq" command is GNU-specific; a BSD userland will not have it.
Use POSIX-conforming "awk" instead.
Reported-by: Joshua Oreman <oremanj@rwcr.net>
Suggested-by: Stefan Hajnoczi <stefanha@gmail.com>
On Mac OS X, it is necessary to build binutils manually; the system
does not provide bfd.h or the libbfd or libiberty libraries.
Originally-fixed-by: Joshua Oreman <oremanj@rwcr.net>
The Mac compiler treats "#pragma pack()" as gcc's "#pragma pack(pop)",
and so dies if the pragma pack stack is empty. Adding a "#pragma
pack(1)" immediately beforehand is enough to keep the Mac compiler
happy.
The combination of "#pragma pack(1)", "#pragma pack()" won't actually
achieve anything on a Mac, but it will at least build. (With gcc, the
"#pragma pack()" overrides any previous pragmas, so is still useful.)
Suggested-by: Joshua Oreman <oremanj@rwcr.net>
[build] Add --divide to ASFLAGS if supported by the assembler
Some builds of the GNU assembler will treat a '/' character as a
comment delimiter. Adding "--divide" will cause it to be treated as a
division operator, as we expect. The "--divide" option is not
available in all gas versions, so apply it only conditionally.
Suggested-by: Joshua Oreman <oremanj@rwcr.net>
[segment] Add "Requested memory not available" error message
prep_segment() can sometimes fail because an image requests memory
that is already in use by gPXE. This will happen if
e.g. undionly.kpxe is used to boot memtest86; the memtest86 image is
an old-format kernel that needs to be loaded at 9000:0000, but this
area of memory may well already be in use by the underlying PXE stack.
Add a human-friendly error message, so that the cause is more
immediately visible.
[bzimage] Support old (pre-2.00 bootloader) Linux kernel formats
This allows gPXE to load memtest86, which is packaged as an old kernel.
Split all code that directly touches the kernel headers out into
bzimage_parse_header() and bzimage_update_header(), to reduce code
size and offset the cost of supporting older kernels.
Total cost of this feature: 11 bytes (uncompressed).
bin/embedded.o has a build dependency on bin/.embedded.list, which
gets generated automatically by the Makefile. However, if the
EMBEDDED_IMAGE list is empty, bin/.embedded.list will never be
created, and so bin/embedded.o will be rebuilt every time due to a
missing dependency.
Fix by forcing bin/.embedded.list to be created even if the list is
empty.
The pcnet32 driver mismanages its RX buffers, with the result that
packets get corrupted if more than one packet arrives between calls to
poll().
Originally-fixed-by: Bill Lortz <Bill.Lortz@premier.org>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Tested-by: Stefan Hajnoczi <stefanha@gmail.com>
Also adds the MAC_ADDR_CORRECT flag, to indicate whether or not the
MAC address needs to be fixed up by the driver.
Signed-off-by: Michael Brown <mcb30@etherboot.org>
This is a major rewrite of the legacy etherboot 3c90x driver using the
gPXE API for much improved performance over the legacy driver it
replaces.
This driver has been tested on 3c905, 3c905B, and 3c905C cards.
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Marty Connor <mdc@etherboot.org>
Tested-by: Marty Connor <mdc@etherboot.org>
Tested-by: Daniel Verkamp <daniel@drv.nu>
Signed-off-by: Marty Connor <mdc@etherboot.org>
[tables] Incorporate table data type information into table definition
Eliminate the potential for mismatches between table names and the
table entry data type by incorporating the data type into the
definition of the table, rather than specifying it explicitly in each
table accessor method.
[tables] Redefine methods for accessing linker tables
Intel's C compiler (icc) chokes on the zero-length arrays that we
currently use as part of the mechanism for accessing linker table
entries. Abstract away the zero-length arrays, to make a port to icc
easier.
Introduce macros such as for_each_table_entry() to simplify the common
case of iterating over all entries in a linker table.
Represent table names as #defined string constants rather than
unquoted literals; this avoids visual confusion between table names
and C variable or type names, and also allows us to force a
compilation error in the event of incorrect table names.
Some firewall devices seem to regard SYN,PSH as an invalid flag
combination and reject the packet. Fix by setting PSH only if SYN is
not set.
Reported-by: DSE Incorporated <dseinc@gmail.com>
[pxeprefix] Merge common code between !PXE and PXENV+
The parsing of the !PXE and PXENV+ structures share a fair bit of
code; merge the common code to save a few bytes.
Signed-off-by: Michael Brown <mcb30@etherboot.org>
[settings] Allow for autovivification of settings blocks
Allow for settings blocks to be created on demand. This allows for
constructions such as
set defaults/filename http://bootserver/bootfile
set defaults/priority 0xff
dhcp net0
chain ${filename}
which will boot from the DHCP-provided filename, or from
"http://bootserver/bootfile" if the DHCP server does not provide a
filename.
(Note that "priority" gets interpreted as a signed integer, so setting
"defaults/priority" to 0xff will cause the "defaults" settings block
to have an effective priority of -1.)
Following the example of the Linux driver, we add a check and delay to
make sure that the NIC has finished resetting before the driver issues
any additional commands.
Signed-off-by: Marty Connor <mdc@etherboot.org>
Having a default script containing
#!gpxe
autoboot
can cause problems when entering commands to load and start a kernel
manually; the default script image will still be present when the
kernel is started and so will be treated as an initrd. It is possible
to work around this by typing "imgfree" before any other commands, but
this is counter-intuitive.
Fix by allowing the embedded image list to be empty (in which case we
just call autoboot()), and making this the default.
Reported by alkisg@gmail.com.
[pxeprefix] Search for the PXE entry points through all methods
Search for the PXE entry points (via the !PXE or PXENV+ structures)
through all known combinations of search methods. Furthermore, if we
find a PXENV+ structure, attempt to use it to find the !PXE structure
if at all possible.
[iscsi] Include credentials in iBFT only if used during iSCSI login
Avoid passing credentials in the iBFT that were available but not
required for login. This works around a problem in the Microsoft
iSCSI initiator, which will refuse to initiate sessions if the CHAP
password is fewer than 12 characters, even if the target ends up not
asking for CHAP authentication.
[crypto] Change cipher_{en,de}crypt() to void functions
It is a programming error, not a runtime error, if we attempt to use
block ciphers with an incorrect blocksize, so use an assert() rather
than an error status return.
Michael Brown