structures.

DHCP still broken and #if 0'd out.

Achieved via Perl using:

perl -pi -e 's/pk_buff/io_buffer/g; s/Packet buffer/I\/O buffer/ig; ' \
	-e 's/pkbuff\.h/iobuf.h/g; s/pkb_/iob_/g; s/_pkb/_iob/g; ' \
	-e 's/pkb/iobuf/g; s/PKB/IOB/g;'

quota is 1.

names.

Add "dev" pointer in struct net_device to tie network interfaces back to a
hardware device.

Force natural alignment of data types in __table() macros.  This seems to
prevent gcc from taking the unilateral decision to occasionally increase
their alignment (which screws up the table packing).

of alloc_pkb() exhaustion when e.g. an iSCSI-booted DOS session is left
idle for a long time at the C:\ prompt and builds up a huge packet
backlog.

of the packet buffer.  Although pkbuffs are guaranteed to be at least
PKB_ZLEN bytes long, there's no guarantee that the data starts at the
start of the packet buffer.

Since we have to align data for rtl8139 anyway, and since the start of
the packet buffer is guaranteed to be aligned to PKB_ALIGN, we may as
well just shuffle the packet down so that it starts at the start of
the packet buffer.  This simultaneously aligns the packet and ensures
that there is enough room for the zero-padding.

(which will need us to wait for TX completions).

Added debug autocolourisation to netdevice.c

Call netdevice's poll() and transmit() methods only when device is open.

device.

Separated the mechanisms of non-volatile storage access and non-volatile
stored options.

a word length.

that don't provide the full flexibility of a bit-bashing interface.

Temporarily hacked rtl8139.c to use the new interface.

Update rtl8139 driver to instantiate an SPI interface with a three-wire
device attached.

generic three-wire serial device support for EEPROM access.

Generic PCI code now handles 64-bit BARs correctly when setting
"membase"; drivers should need to call pci_bar_start() only if they want
to use BARs other than the first memory or I/O BAR.

Split rarely-used PCI functions out into pciextra.c.

Core PCI code is now 662 bytes (down from 1308 bytes in Etherboot 5.4).
284 bytes of this saving comes from the pci/pciextra split.

Cosmetic changes to lots of drivers (e.g. vendor_id->vendor in order to
match the names used in Linux).

I want to get to the point where any header in include/ reflects a
standard user-level header (e.g. a POSIX header), while everything that's
specific to gPXE lives in include/gpxe/.  Headers that reflect a Linux
header (e.g. if_ether.h) should also be in include/gpxe/, with the same
name as the Linux header and, preferably, the same names used for the
definitions.

perl -pi -0777 -e 's/^static struct \w+_driver (\w+) =\s*(\w+_DRIVER \()/${2} ${1},/msg' *.c

#!/usr/bin/perl -w -pi -0777

use strict;

( my $type ) = /find_(\w+?)_boot_device/ or die "Could not find type\n";

( my $disable ) = /\.disable\s*=\s*(\w+)/ or die "Could not locate disable\n";

s/(${disable}\s*\(\s*struct\s+nic\s+\*nic)(\s*\)\s*\{)(\s*)/${1}, struct ${type}_device \*${type} __unused${2}${3}nic_disable ( nic );${3}/s;

s/(${disable}\s*\(\s*struct\s+nic\s+\*nic)(\s*\)\s*;)/${1}, struct ${type}_device \*${type}${2}/g;

s/^\s*.disable\s*=\s*${disable}\s*,\s*?$//m;

s/(_probe\s*\(\s*)struct\s+dev\s+\*dev/${1}struct nic \*nic/g;

s/^\s*struct\s+nic\s+\*nic\s*=\s*nic_device\s*\(\s*dev\s*\)\s*;\s*?$//m;

s/^(\s*)(nic->(ioaddr|irqno)\s*=\s*${type})/${1}${type}_fill_nic ( nic, ${type} );\n${1}${2}/m;

since we probably shouldn't be doing this to arbitrary devices during a
PCI bus scan...

perl -pi -0777 -e 's/\s*?if\s*\(\s*!\s*find_pci_device.*?,\s*\&(\w+)\s*\)\s*\)\s*return\s*0;(.*BOOT_DRIVER\s*\(.*?,)(.*?\))/$2 find_pci_boot_device, $1,$3/sm' *.c

perl -pi -0777 -e 's/(_probe\s*\(\s*struct\s+dev.*?)(\s*\)\s*{.*?$)\s*struct pci_device.*?=\s*pci_device \( dev \);$/${1}, struct pci_device *pci${2}/ms' *.c

sis900 excluded from update

perl -pi -0777 -e 's/^(\s*)dev->disable(\s*)=\s*(\w+)_disable;\s*nic->poll\s*=\s*(\w+);\s*nic->transmit\s*=\s*(\w+);\s*nic->irq\s*=\s*(\w+);/static struct nic_operations ${3}_operations;\nstatic struct nic_operations ${3}_operations = {\n\t.connect\t= dummy_connect,\n\t.poll\t\t= $4,\n\t.transmit\t= $5,\n\t.irq\t\t= $6,\n\t.disable\t= ${3}_disable,\n};${1}nic->nic_op\t= &${3}_operations;/msg' *.c

perl -pi -e 's/(_probe\s*\(\s*struct )dev \*.*?(\s*\);)/${1}dev *dev$2/' *.c

perl -pi -e 's/(_disable\s*\(\s*struct )dev \*.*?(\s*\);)/${1}nic *nic$2/' *.c

perl -pi -0777 -e 's/_disable\s*\(\s*struct dev \*dev\s*\)\s*{\s*struct nic \*nic.*?$/_disable ( struct nic *nic ) {/ms' *.c

perl -pi -0777 -e 's/_disable\s*\(\s*struct dev \*dev(\s*__unused)?\)\s*{/_disable ( struct nic *nic$1 ) {/ms' *.c

perl -pi -0777 -e 's/_probe\s*\(\s*struct dev \*dev,\s*struct pci_device \*(\w+?)\s*\)\s*{(\s*)struct nic \*nic.*?$/_probe ( struct dev *dev ) {\n${2}struct nic *nic = nic_device ( dev );\n${2}struct pci_device *$1 = pci_device ( dev );/ms' *.c

perl -pi -0777 -e 's/static struct pci_driver (\w+) __pci_driver = {.*\.name\s*=\s*(\"\S+\").*\.probe\s*=\s*(\w+).*\.ids\s*=\s*(\w+).*\.class\s*=\s*(\w+).*?};/static struct pci_driver $1 =\n\tPCI_DRIVER ( $2, $4, $5 );\n\nBOOT_DRIVER ( $2, $3 );/ms' *.c

perl -pi -e 's/(PCI_DRIVER \(.*, )0 \);/${1}PCI_NO_CLASS );/' *.c