Access to the gpxe.org and etherboot.org domains and associated
resources has been revoked by the registrant of the domain. Work
around this problem by renaming project from gPXE to iPXE, and
updating URLs to match.
Also update README, LOG and COPYRIGHTS to remove obsolete information.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Following the example of the Linux driver, we add a check and delay to
make sure that the NIC has finished resetting before the driver issues
any additional commands.
Signed-off-by: Marty Connor <mdc@etherboot.org>
This previously unsupported NIC variant was was found to work using
the current driver:
PCI_ROM(0x13f0, 0x0200, "ip100a", "IC+ IP100A"),
Signed-off-by: Marty Connor <mdc@etherboot.org>
[i386] Change [u]int32_t to [unsigned] int, rather than [unsigned] long
This brings us in to line with Linux definitions, and also simplifies
adding x86_64 support since both platforms have 2-byte shorts, 4-byte
ints and 8-byte long longs.
Remove *_fill_nic() calls, and directly set nic->ioaddr and nic->irqno .
This needs to be done manually because if the irq() routine is
implemented then we want something like "nic->irqno = pci->irqno;",
else we do "nic->irqno = 0;" nic->ioaddr may also need to be set
carefully.
Also added local variables to end of many files, for emacs indentation
to match kernel style (tab does 8 space indent).
Add "name" field to struct device to allow human-readable hardware device
names.
Add "dev" pointer in struct net_device to tie network interfaces back to a
hardware device.
Force natural alignment of data types in __table() macros. This seems to
prevent gcc from taking the unilateral decision to occasionally increase
their alignment (which screws up the table packing).
Restructured PCI subsystem to fit the new device model.
Generic PCI code now handles 64-bit BARs correctly when setting
"membase"; drivers should need to call pci_bar_start() only if they want
to use BARs other than the first memory or I/O BAR.
Split rarely-used PCI functions out into pciextra.c.
Core PCI code is now 662 bytes (down from 1308 bytes in Etherboot 5.4).
284 bytes of this saving comes from the pci/pciextra split.
Cosmetic changes to lots of drivers (e.g. vendor_id->vendor in order to
match the names used in Linux).
I want to get to the point where any header in include/ reflects a
standard user-level header (e.g. a POSIX header), while everything that's
specific to gPXE lives in include/gpxe/. Headers that reflect a Linux
header (e.g. if_ether.h) should also be in include/gpxe/, with the same
name as the Linux header and, preferably, the same names used for the
definitions.
#!/usr/bin/perl -w -pi -0777
use strict;
( my $type ) = /find_(\w+?)_boot_device/ or die "Could not find type\n";
( my $disable ) = /\.disable\s*=\s*(\w+)/ or die "Could not locate disable\n";
s/(${disable}\s*\(\s*struct\s+nic\s+\*nic)(\s*\)\s*\{)(\s*)/${1}, struct ${type}_device \*${type} __unused${2}${3}nic_disable ( nic );${3}/s;
s/(${disable}\s*\(\s*struct\s+nic\s+\*nic)(\s*\)\s*;)/${1}, struct ${type}_device \*${type}${2}/g;
s/^\s*.disable\s*=\s*${disable}\s*,\s*?$//m;
s/(_probe\s*\(\s*)struct\s+dev\s+\*dev/${1}struct nic \*nic/g;
s/^\s*struct\s+nic\s+\*nic\s*=\s*nic_device\s*\(\s*dev\s*\)\s*;\s*?$//m;
s/^(\s*)(nic->(ioaddr|irqno)\s*=\s*${type})/${1}${type}_fill_nic ( nic, ${type} );\n${1}${2}/m;
Stefan Weil