H. Peter Anvin <hpa@zytor.com> sent word that Sergey Vlasov
<vsu@altlinux.ru> discovered gPXE lkrn images fail to load in SYSLINUX
3.70 because we have initrd_addr_max zeroed.  This patch sets the same
value as the Linux kernel.

Also change the header jmp instruction to use a hardcoded opcode value
like Linux does.  Just in case the assembler decides to use a three-byte
instruction instead of the desired two-byte jmp.

Allow settings to be expanded in arbitrary commands, such as

  kernel http://10.0.0.1/boot.php?uuid=${uuid}

Also add the "echo" command, as being the easiest way to test this
features.

Print one dot per second while waiting in monojob.c (e.g. for DHCP,
for file downloads, etc.), to inform user that the system has not
locked up.

Patch contributed by Andrew Schran <aschran@google.com>, minor
modification by me.

This change allows the time for which shell banners are displayed to
be configured in the config.h file.  The ability to access the shell
can also be effectively disabled by setting this timeout to zero.

In tg3_chip_reset(), the PCI_EXPRESS change is taken from the Linux
tg3 driver. I am not sure what exactly it does (it is not documented
in the Linux driver), but it is necessary for the NIC to work
correctly.

Use "-include" rather than "include" for the generated Makefile
fragments, in order to suppress the long list of warnings that
otherwise appears at the start of a clean build.

Contributed by Edward Waugh <ewaugh@netxen.com>

Add yet another ugly hack to iscsiboot.c, this time to allow the user to
inhibit the shutdown/removal of the iSCSI INT13 device (and the network
devices, since they are required for the iSCSI device to function).

On the plus side, the fact that shutdown() now takes flags to
differentiate between shutdown-for-exit and shutdown-for-boot means that
another ugly hack (to allow returning via the PXE stack on BIOSes that
have broken INT 18 calls) will be easier.

I feel dirty.

Conjecture: The hardware issues 64-bit DMA writes of status descriptors,
which some PCI bridges seem to split into two 32-bit writes in reverse
order (i.e. dword 1 first).  This means that we sometimes observe a
partial status descriptor.  Add an explicit check to ensure that the
descriptor is complete before processing it.

Also ensure that the RDS consumer counter is incremented only when we
know that we have actually consumed an RX descriptor.

Shifting all INT13 drive numbers causes problems on systems that use a
sparse drive number space (e.g. qemu BIOS, which uses 0xe0 for the CD-ROM
drive).

The strategy now is:

  Each drive is assigned a "natural" drive number, being the next
  available drive number in the system (based on the BIOS drive count).

  Each drive is accessed using its specified drive number.  If the
  specified drive number is -1, the natural drive number will be used.

  Accesses to the specified drive number will be delivered to the
  emulated drive, masking out any preexisting drive using this number.

  Accesses to the natural drive number, if different, will be remapped to
  the masked-out drive.

The overall upshot is that, for examples:

  System has no drives.  Emulated INT13 drive gets natural number 0x80
  and specified number 0x80.  Accesses to drive 0x80 go to the emulated
  drive, and there is no remapping.

  System has one drive.  Emulated INT13 drive gets natural number 0x81
  and specified number 0x80.  Accesses to drive 0x80 go to the emulated
  drive.  Accesses to drive 0x81 get remapped to the original drive 0x80.

This duplicates a fix made to tcp.c in commit
d5735c631c.

Verifying server ID and DHCP transaction ID is insufficient to
differentiate between DHCPACK and ProxyDHCPACK when the DHCP server and
Proxy DHCP server are the same machine.

PCI ID supplied (and tested) by Frederic
Temporelli <frederic.temporelli@bull.net>

If there is more than one loaded image, refuse to automatically select
the image to execute.  There are at least two possible cases, with
different "correct" answers:

1. User loads image A by mistake, then loads image B and types "boot".
   User wants to execute image B.

2. User loads image A, then loads image B (which patches image A), then
   types "boot".  User wants to execute image A.

If a user actually wants to load multiple images, they must explicitly
specify which image is to be executed.

Clearing the LOADED flag actually prevents users from doing clever things
such as loading an image, then loading a patch image, then executing the
first image.  (image_exec() checks for IMAGE_LOADED, so this sequence of
operations will fail if the LOADED flag gets cleared.)

This reverts commit 14c080020f.

Loading an image may overwrite part or all of any previously-loaded
images, so we should clear the LOADED flag for all images prior to
attempting to load a new image.

We can just treat all non-kernel images as initrds, which matches our
behaviour for multiboot kernels.  This allows us to eliminate initrd as
an image type, and treat the "initrd" command as just another synonym for
"imgfetch".

dhcppkt_store() is supposed to clear the setting if passed NULL for the
setting data.  In the case of fixed-location fields (e.g. client IP
address), this requires setting the content of the field to all-zeros.

__from_data16 and __from_text16 now take a pointer to a
.data16/.text16 variable, and return the real-mode offset within the
appropriate segment.  This matches the use case for every occurrence
of these macros, and prevents potential future bugs such as that fixed
in commit d51d80f.  (The bug arose essentially because "&pointer" is
still syntactically valid.)

__from_data16 takes the value pointed to, rather than the pointer
itself.  This was silently causing gPXE to return a dud buffer pointer
when the caller did not supply a buffer for PXENV_GET_CACHED_INFO.

Perform the same test for a matching DHCP_SERVER_IDENTIFIER on
ProxyDHCPACKs as we do for DHCPACKs.  Otherwise, a retransmitted
DHCPACK can end up being treated as the ProxyDHCPACK.

I have a vague and unsettling memory that this test was deliberately
omitted, but I can't remember why, and can't find anything in the VC
logs.

Remove src/Config as it has no more users, and conflicts with
src/config on case-deficient filesystems.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

ns8390.c can produce four different drivers (one PCI, three ISA.)  The
ISA driver requires setting a few macros; do that by setting defines
in stub files instead of using src/Config.

Currently, all the ISA drivers are broken (they were not enabled by
default), so #if 0 them out.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

zImage kernels require the real-mode portion to be loaded at 9000:0000
rather than 1000:0000.

When the 16-bit segment registers are accessed using 32-bit instructions
the high order bytes are undefined on older CPUs.  We now explicitly
zero the high order bytes when snapshotting the CPU state.  This ensures
that the GDB stub reports consistent values for the segment registers.

This commit implements GDB over UDP.  Using UDP is more complex than
serial and has required some restructuring.

The GDB stub is now built using one or both of GDBSERIAL and GDBUDP
config.h options.

To enter the debugger, execute the gPXE shell command:
gdbstub <transport> [<options>...]

Where <transport> is "serial" or "udp".  For "udp", the name of a
configured network device is required:
gdbstub udp net0

The GDB stub listens on UDP port 43770 by default.

This commit also includes a test to ensure that single stepping works,
since continue, kill, detach, and single step all share code.

Commit fd0aef9 introduced a typo that caused PMM detection to start at
paragraph 0xe00 rather than 0xe000.  (Detection would still work, since it
would scan until it ran out of base memory, but it would end up scanning
an unnecessarily large portion of base memory.)

Spotted by Sebastian Herbszt <herbszt@gmx.de>.

OpenBSD throws compiler warnings that we can't reproduce on Linux, for
some reason.

Original patch from Dewey Hylton <dewey@hyltown.com>.

Send a null command, specifically "pulse outputs" with no outputs
selected, to the KBC after changing A20.  This was apparently done by DOS,
presumably as a synchronization hack, and the authors of the UHCI spec
thought it was inherent.  Therefore, there are systems out there (e.g. HP
DL360 G5) which will stop responsing to "legacy USB" unless they see the
null command, 0xFF, written to port 0x64 at the end of the A20 toggling
sequence.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

If we ever need these macros, they should be defined in
include/{big,little}_bswap.h, and the whole family should be defined.

Add an entry to tg3_nics for the BCM5789

Signed-off-by: Steven Walter <stevenrwalter@gmail.com>