The "prompt" command exposes the prompt() function, allowing a script
to prompt the user for a keypress and take action depending on the
result. For example
#!ipxe
prompt -k 0x197e -t 2000 Press F12 to boot from network... || exit
autoboot
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The function keys F5-F12 all conform to the same ANSI pattern as the
other "special" keys that we currently recognise. Add these key
definitions, and shrink the representation of the ANSI sequences in
bios_console.c to compensate.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Refactor the {load,exec} image operations as {probe,exec}. This makes
the probe mechanism cleaner, eliminates some forward declarations,
avoids holding magic state in image->priv, eliminates the possibility
of screwing up between the "load" and "exec" stages, and makes the
documentation simpler since the concept of "loading" (as distinct from
"executing") no longer needs to be explained.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When chainloading rtl8139.pxe from an old Etherboot rtl8139.zrom, iPXE
can end up misreading the first word of the MAC address from the
EEPROM as being all zeroes. This is presumably because Etherboot has
left the serial EEPROM in an unexpected state.
Fix by using the chip select line to reset the SPI device before we
start accessing it.
Reported-by: Mandar U Jog <mandarjog@gmail.com>
Tested-by: Mandar U Jog <mandarjog@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[parseopt] Refer to online documentation for command help
The online documentation (e.g. http://ipxe.org/cmd/ifopen), though not
yet complete, is far more comprehensive than could be provided within
the iPXE binary. Save around 200 bytes (compressed) by removing the
command descriptions from the interactive help, and instead referring
users directly to the web page describing the relevant command.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The default initiator IQN is "iqn.2000-09.org.etherboot:UNKNOWN".
This is problematic for two reasons:
a) the etherboot.org domain (and hence the associated IQN namespace)
is not under the control of the iPXE project, and
b) some targets (correctly) refuse to allow concurrent connections
from different initiators using the same initiator IQN.
Solve both problems by changing the default initiator IQN to be
iqn.2010-04.org.ipxe:<hostname> if a hostname is set, or
iqn.2010-04.org.ipxe:<uuid> if no hostname is set.
Explicit initiator IQNs set via DHCP option 203 are not affected by
this change.
Unfortunately, this change is likely to break some existing
configurations, where ACL rules have been put in place referring to
the old default initiator IQN. Users may need to update ACLs, or
force the use of the old IQN using an iPXE script line such as
set initiator-iqn iqn.2000-09.org.etherboot:UNKNOWN
or a dhcpd.conf option such as
option iscsi-initiator-iqn "iqn.2000-09.org.etherboot:UNKNOWN"
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Make fetch_string_setting_copy() easier to use
Most callers of functions in the fetch_setting() family treat any
errors as meaning "non-existent setting". In the case of
fetch_string_setting_copy(), an existent setting can still result in
an error due to memory allocation failure.
Allow the caller to distinguish between a non-existent setting and an
error in allocating memory for the copy, by returning success (and a
NULL buffer pointer) for a non-existent setting.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Avoid fetch_string_setting_copy() leaving an uninitialised pointer
For consistency with other functions in the fetch_setting() family,
ensure that fetch_string_setting_copy() always initialises the pointer
to the fetched setting even if fetching fails.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[bofm] Allow garbage collection of BOFM code in non-BOFM builds
Most builds will not have BOFM enabled. In these builds, allow all
BOFM code (including BOFM-only code within the individual drivers) to
be garbage-collected at link time in order to save space in the final
binary.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Testing BOFM involves gaining access to an IBM blade chassis, which is
often not practical. Provide a facility for testing BOFM
functionality outside of a real IBM blade context.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[autoboot] Allow a SAN boot as a fallback if a filename boot returns
Currently, if both a filename and root-path are present, iPXE will
hook the SAN device but will only attempt to boot from the filename.
Change this behaviour so that both are attempted. Users who want to
avoid booting from the SAN as a fallback can do so via the existing
"skip-san-boot" setting.
This allows for seamless deployment to a SAN target using Windows
Deployment Services (and similar products). A user simply has to
define the root-path option in DHCP and then use WDS to deploy the
system. No further configuration should be required.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
If the NBP returns, then always print a trailing newline, since some
NBPs (e.g. wdsnbp.com) leave the cursor in a random position halfway
across the screen.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[image] Allow download job to complete before acting upon image
Allow the monojob controlling the download to complete before calling
register_image() and friends. This allows the trailing "ok" from
monojob.c to be printed before the image starts executing (and
possibly printing output of its own).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[int13] Automatically reopen underlying block device as needed
We currently use INT 13,00 as an opportunity to reopen the underlying
block device, which works well for callers such as DOS that will use
INT 13,00 in response to any disk errors. However, some callers (such
as Windows Server 2008) do not attempt to reset the disk, and so any
failures become effectively permanent.
Fix this by automatically reopening the underlying block device
whenever we might want to access it.
This makes direct installation of Windows to an iSCSI target much more
reliable.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[prefix] Set the "size" bit in the GDT entry for the flat data segment
The "size" bit (aka the D/B) bit should (as far as I can tell) be
irrelevant for accesses to a non-code, non-stack, expand-upwards
segment. However, VirtualBox fails on some accesses via this segment
if this bit is not set.
This change allows iPXE to boot under VirtualBox without having to
disable VT-x/AMD-V support.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[linux] Remove Linux-specific code from default (non-Linux) build
Building the Linux-specific code (tap.o et al) requires external
headers that have proven to be extremely variable across systems,
causing frequent build failures.
Until this situation is rectified, remove the Linux-specific code from
the default (non-Linux build).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
After a more accurate reading of RFC 3720, it becomes clear how NOPs
are supposed to work. The current implementation (which just ignores
NOP-Ins) is sufficient to cope with NOP-Ins sent to update CmdSN, but
will need to be extended before it can cope with NOP-Ins sent as iSCSI
keepalives.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some iSCSI targets (observed with a Synology DS207+ NAS) send
unsolicited NOP-Ins to the initiator. RFC 3720 is remarkably unclear
and possibly self-contradictory on how NOPs are supposed to work, but
it seems as though we can legitimately just ignore any unsolicited
NOP-In PDU.
Reported-by: Marc Lecuyer <marc@maxiscreen.com>
Originally-implemented-by: Thomas Miletich <thomas.miletich@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some binutils versions will drag in an object to satisfy the entry
symbol; some won't. Try to cope with this exciting variety of
behaviour by ensuring that all entry symbols are unique.
Remove the explicit inclusion of the prefix object on the linker
command line, since the entry symbol now provides all the information
needed to identify the prefix.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Ensure an entry point symbol exists in all builds
Commit 623469d ("[build] Eliminate unused sections at link-time")
introduced a regression in several build formats, in which the prefix
would end up being garbage-collected out of existence. Fix by
ensuring that an entry symbol exists in each possible prefix, and is
required by the linker script.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use -ffunction-sections, -fdata-sections, and --gc-sections to
automatically prune out any unreferenced sections.
This saves around 744 bytes (uncompressed) from the rtl8139.rom build.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[efi] Provide space for storing the EFI driver name
Commit d7736fb ("[efi] Allow EFI to control PCI bus enumeration")
introduced a bug in which the EFI driver name became an
(uninitialised) pointer rather than an array.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
EFI performs its own PCI bus enumeration. Respect this, and start
controlling devices only when instructed to do so by EFI.
As a side benefit, we should now correctly create multiple SNP
instances for multi-port devices.
This should also fix the problem of failing to enumerate devices
because the PCI bridges have not yet been enabled at the time the iPXE
driver is loaded.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some operating environments require (or at least prefer) that we do
not perform our own PCI bus scan, but deal only with specified
devices. Modularise the PCI core to allow for this.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown