The hardware address is an intrinsic property of the hardware, while
the link-layer address can be changed at runtime.  This separation is
exposed via APIs such as PXE and EFI, but is currently elided by gPXE.

Expose the hardware and link-layer addresses as separate properties
within a net device.  Drivers should now fill in hw_addr, which will
be used to initialise ll_addr at the time of calling
register_netdev().

Queue pairs are now assumed to be created in the INIT state, with a
call to ib_modify_qp() required to bring the queue pair to the RTS
state.

ib_modify_qp() no longer takes a modification list; callers should
modify the relevant queue pair parameters (e.g. qkey) directly and
then call ib_modify_qp() to synchronise the changes to the hardware.

The packet sequence number is now a property of the queue pair, rather
than of the device.

Each queue pair may have an associated address vector.  For RC queue
pairs, this is the address vector that will be programmed in to the
hardware as the remote address.  For UD queue pairs, it will be used
as the default address vector if none is supplied to ib_post_send().

Attempting the broadcast group join while the link is down is
harmless, but can generate annoying volumes of debug messages.

Now that IPoIB has to deal with only one set of queues, the queue set
abstraction becomes merely an inconvenient wrapper.

All packets handled by the metadata queue set now go via the GMA.

Generalise out the multicast group membership record code from IPoIB.

The queue key is stored as a property of the queue pair, and so can
optionally be added by the Infiniband core at the time of calling
ib_post_send(), rather than always having to be specified by the
caller.

This allows IPoIB to avoid explicitly keeping track of the data queue
key.

Now that path record lookups are handled entirely via
ib_resolve_path(), the only role of the IPoIB peer cache is as a
lookup table for MAC addresses.  Update the code structure and
comments to reflect this.

The IPoIB broadcast MAC address varies according to the partition key.
Now that the broadcast MAC address is a property of the network device
rather than of the link layer, we can expose this real MAC address
directly.

The broadcast LID is now identified via a path record lookup; this is
marginally inefficient (since it was present in the MCMemberRecord
GetResponse), but avoids the need to special-case broadcasts when
constructing the address vector in ipoib_transmit().

Remove the special handling of the IPoIB broadcast QPN.

Generalise out the path record lookup code from IPoIB.

Currently, all Infiniband users must create a process for polling
their completion queues (or rely on a regular hook such as
netdev_poll() in ipoib.c).

Move instead to a model whereby the Infiniband core maintains a single
process calling ib_poll_eq(), and polling the event queue triggers
polls of the applicable completion queues.  (At present, the
Infiniband core simply polls all of the device's completion queues.)
Polling a completion queue will now implicitly refill all attached
receive work queues; this is analogous to the way that netdev_poll()
implicitly refills the RX ring.

Infiniband users no longer need to create a process just to poll their
completion queues and refill their receive rings.

IPoIB and the SMA have separate constants for the packet size to be
used to I/O buffer allocations.  Merge these into the single
IB_MAX_PAYLOAD_SIZE constant.

(Various other points in the Infiniband stack have hard-coded
assumptions of a 2048-byte payload; we don't currently support
variable MTUs.)

IPoIB has a link-layer broadcast address that varies according to the
partition key.  We currently go through several contortions to pretend
that the link-layer address is a fixed constant; by making the
broadcast address a property of the network device rather than the
link-layer protocol it will be possible to simplify IPoIB's broadcast
handling.

In order to construct outgoing link-layer frames or parse incoming
ones properly, some protocols (such as 802.11) need more state than is
available in the existing variables passed to the link-layer protocol
handlers. To remedy this, add struct net_device *netdev as the first
argument to each of these functions, so that more information can be
fetched from the link layer-private part of the network device.

Updated all three call sites (netdevice.c, efi_snp.c, pxe_undi.c) and
both implementations (ethernet.c, ipoib.c) of ll_protocol to use the
new argument.

Signed-off-by: Michael Brown <mcb30@etherboot.org>

Add FILE_LICENCE declarations to almost all files that make up the
various standard builds of gPXE.

Defer the call to ib_open() until we want to actually open the device,
rather than when the device is registered.

This brings us in to line with Linux definitions, and also simplifies
adding x86_64 support since both platforms have 2-byte shorts, 4-byte
ints and 8-byte long longs.

The return path in directed route SMPs lists the egress ports in order
from SM to node, rather than from node to SM.

To write to the correct offset within the return path, we need to
parse the hop pointer.  This is held within the class-specific data
portion of the MAD header, which was previously unused by us and
defined to be a uint16_t.  Define this field to be a union type; this
requires some rearrangement of ib_mad.h and corresponding changes to
ipoib.c.

Some Infiniband cards will not be as accommodating as the Arbel and
Hermon cards in providing enough space for us to push a fake extra
header at the start of the received packet.  We must therefore make do
with squeezing enough information to identify source and destination
addresses into the two bytes of padding within a genuine IPoIB
link-layer header.

Not all Infiniband cards have embedded subnet management agents.
Split out the code that communicates with such an embedded SMA into a
separate ib_smc.c file, and have drivers call ib_smc_update()
explicitly when they suspect that the answers given by the embedded
SMA may have changed.

Receive completion handlers now get passed an address vector
containing the information extracted from the packet headers
(including the GRH, if present), and only the payload remains in the
I/O buffer.

This breaks the symmetry between transmit and receive completions, so
remove the ib_completer_t type and use an ib_completion_queue_operations
structure instead.

Rename the "destination QPN" and "destination LID" fields in struct
ib_address_vector to reflect its new dual usage.

Since the ib_completion structure now contains only an IB status code,
("syndrome") replace it with a generic gPXE integer status code.

Both queue owners and drivers often need to keep track of the fill
level, so let's make it a generic property.

Avoid leaking I/O buffers in ib_destroy_qp() by completing any
outstanding work queue entries with a generic error code.  This
requires the completion handlers to be available to ib_destroy_qp(),
which is done by making them static configuration parameters of the CQ
(set by ib_create_cq()) rather than being provided on each call to
ib_poll_cq().

This mimics the functionality of netdev_{tx,rx}_flush().  The netdev
flush functions would previously have been catching any I/O buffers
leaked by the IPoIB data queue (though not by the IPoIB metadata
queue).

EFI requires us to be able to specify the source address for
individual transmitted packets, and to be able to extract the
destination address on received packets.

Take advantage of this to rationalise the push() and pull() methods so
that push() takes a (dest,source,proto) tuple and pull() returns a
(dest,source,proto) tuple.

Multicast hashing is an ugly overlap between network and link layers.
EFI requires us to provide access to this functionality, so move it
out of ipv4.c and expose it as a method of the link layer.

Currently this length is set at device allocation time, and is never
changed.

Determine the network-layer packet type and fill it in for UNDI
clients.  This is required by some NBPs such as emBoot's winBoot/i.

This change requires refactoring the link-layer portions of the
gPXE netdevice API, so that it becomes possible to strip the
link-layer header without passing the packet up the network stack.

Add ability for network devices to flag link up/down state to the
networking core.

Autobooting code will now wait for link-up before attempting DHCP.

IPoIB reflects the Infiniband link state as the network device link state
(which is not strictly correct; we also need a succesful IPoIB IPv4
broadcast group join), but is probably more informative.

Infiniband devices no longer block waiting for link-up in
register_ibdev().

Hermon driver needs to create an event queue and poll for link-up events.

Infiniband core needs to reread MAD parameters when link state changes.

IPoIB needs to cope with Infiniband link parameters being only partially
available at probe and open time.

Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>

Arbel and Hermon cards both have multiple ports.  Add the
infrastructure required to register each port as a separate IB
device.  Don't yet register more than one port, since registration
will currently fail unless a valid link is detected.

Use ib_*_{set,get}_{drv,owner}data wrappers to access driver- and
owner-private data on Infiniband structures.

tracking down a bug that turned out to be a free_iob() used where I
needed a netdev_tx_complete().  This left the freed I/O buffer on the
net device's TX list, with bad, bad consequences later.

Also fixed the bug in question.