[contrib] Move most contrib content to a separate repository

Most of the content that was previously in this directory has been
moved to a separate git repository:

    http://git.etherboot.org/?p=contrib.git;a=summary

or the Etherboot Project wiki:

    http://etherboot.org/

contrib/3c90xutil/Makefile

@@ -1,9 +0,0 @@
-FILES = cromutil ocromutil bromutil
-
-INCLUDEDIR = /usr/include
-CFLAGS = -O2 -fomit-frame-pointer -Wall -I$(INCLUDEDIR)
-
-all: $(FILES)
-
-clean:
-	rm -f $(FILES) *~ core

contrib/3c90xutil/README

@@ -1,80 +0,0 @@
-This utility was apparently writen by John Finlay and came to me
-via Richard Schroeder who got it from Greg Beeley. John, if you want
-to be credited with your full address or whatever in the Etherboot
-documentation, please contact me (Etherboot maintainer).
-
-1/18/2000 Marty Connor (mdc@thinguin.org) added code for the 3C905C
-with AT49BV512 Flash memory, and created cromutil and bromutil to
-differentiate the versions.  cromutil is for 3C905C and bromutil is
-for 3C905B.
-
-8.28.2005 I am adding a new version from Jorge L. deLyra that will
-replace cromutil.c.  I will rename cromutil.c to ocromutil.c
-
-  From:	        delyra@fma.if.usp.br
-  Subject:	Improved version of cromutil.c.
-  Date:		June 22, 2004 12:19:00 AM EDT
-  To:		mdc@thinguin.org
-
-  Dear Marty,
-
-       Below you will find a new version of the cronutil.c program. Since
-  the changes were quite large I am sending the program rather than a patch.
-  I added support for 3C905CX cards with a page-mode super-flash EEPROM, and
-  included several informative messages, a programming progress report and a
-  detailed help message. I did all the tests I could with it and it seems to
-  work correctly for the 3C905CX with either type of EEPROM chip.
-
-  A question: is there a similar program for Intel eepro100 cards or for the
-  Intel or 3COM Gbit cards?
-					  Cheers,
-
-  ----------------------------------------------------------------
-	  Jorge L. deLyra,  Associate Professor of Physics
-	      The University of Sao Paulo,  IFUSP-DFMA
-	 For more information: finger delyra@latt.if.usp.br
-  ----------------------------------------------------------------
-
-12/4/2009 The new cromutil version from Jorge L. deLyra can be found in
-cromutil.c, whereas the old version can be found in ocromutil.c.
-
-bromutil.c now supports enabling a bootrom workaround that was previously
-implemented in the old 3c90x driver. Some 3c90xB cards refuse to load gPXE
-after the ROM is burned. The gPXE banner is likely to appear, but gPXE will
-crash soon after.
-If this is the case try the following commands. It is assumed that you replace
-0x6600 with the I/O address of your card which can be acquired with:
-(look for a line like 'I/O ports at e400')
- $ lspci -v
-
-    $ make
-    $ ./bromutil 0x6600 bootrom
-
-This command will write into the settings EEPROM of the network card. In case
-the network card shows any unexpected behavior it is possible to restore the
-EEPROM settings with a 3COm provided tool called '3c90xcfg.exe'(google it for
-mirrors).
-
-  -- Thomas Miletich
-
-Be careful. You can easily erase your Flash memory using these
-utilities.  Make *sure* to back them up first using the "read"
-command. You must "erase" before using "prog" to program the chip with
-Etherboot code.  This code comes with NO WARRANTY, and you take sole
-responsibility and liability for whatever it does.  Read the
-"romutil.txt" file for more information on commands.
-
-That being said, if you are programming a 3C905C-TXM (for example)
-you would do something like this:
-
-    $ cd etherboot-x.x.x/contrib
-    $ tar -zxvf n3c905xutil.tar.gz
-    $ cd n3c905xutil
-    $ make
-    # replace 0x6600 with whatever the IO Addr for your card is!!!!
-    $ ./cromutil 0x6600 read > 905cbackup.bin
-    $ ./cromutil 0x6600 erase
-    $ ./cromutil 0x6600 prog < 3c90x.lzrom
-
-You should now have an Etherboot-enabled 3c905C-TXM.
-

contrib/3c90xutil/bromutil.c

@@ -1,254 +0,0 @@
-/* 
- * readutil.c - perform various control ops on the 3c509b bios rom
- *
- */
-
-#ifndef __i386__
-#  error "This program can't compile or run on non-intel computers"
-#else
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-
-#ifdef __FreeBSD__
-
-#include <fcntl.h>
-#include <machine/cpufunc.h>
-
-#define OUTB(data, port) 	outb(port, data)
-#define OUTW(data, port) 	outw(port, data)
-#define OUTL(data, port) 	outl(port, data)
-
-#else
-
-#include <sys/io.h>
-
-#define OUTB(data, port) 	outb(data, port)
-#define OUTW(data, port) 	outw(data, port)
-#define OUTL(data, port) 	outl(data, port)
-
-#endif
-
-/*
- * write_eeprom() and enum definitions are copied from vortex-diag.c,
- * Copyright 1997-2004 by Donald Becker.
- *	This software may be used and distributed according to the terms of
- *	the GNU General Public License (GPL), incorporated herein by reference.
- *	Contact the author for use under other terms.
- */
-
-enum vortex_cmd {
-	TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
-	RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11,
-	UpStall = 6<<11, UpUnstall = (6<<11)+1,
-	DownStall = (6<<11)+2, DownUnstall = (6<<11)+3,
-	RxDiscard = 8<<11, TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
-	FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
-	SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
-	SetTxThreshold = 18<<11, SetTxStart = 19<<11,
-	StartDMAUp = 20<<11, StartDMADown = (20<<11)+1, StatsEnable = 21<<11,
-	StatsDisable = 22<<11, StopCoax = 23<<11, SetFilterBit = 25<<11,
-};
-
-enum Window0 {
-	Wn0EepromCmd = 10,		/* Window 0: EEPROM command register. */
-	Wn0EepromData = 12,		/* Window 0: EEPROM results register. */
-	IntrStatus=0x0E,		/* Valid in all windows. */
-};
-
-enum Win0_EEPROM_cmds {
-	EEPROM_Read = 2, EEPROM_WRITE = 1, EEPROM_ERASE = 3,
-	EEPROM_EWENB = 0xC,		/* Enable erasing/writing for 10 msec. */
-	EEPROM_EWDIS = 0x0,		/* Disable EWENB before 10 msec timeout. */
-};
-
-#define debug 1
-static void write_eeprom(long ioaddr, int addrlen, int index, int value)
-{
-	int timer;
-
-	/* Verify that the EEPROM is idle. */
-	for (timer = 1620; inw(ioaddr + Wn0EepromCmd) & 0x8000;)
-		if (--timer < 0)
-			goto error_return;
-	/* Enable writing: EEPROM_EWENB | 110000.... */
-	OUTW(3 << (addrlen-2), ioaddr + Wn0EepromCmd);
-	for (timer = 400; inw(ioaddr + Wn0EepromCmd) & 0x8000;) {
-		if (--timer < 0)
-			goto error_return;
-	}
-	if (debug)
-		fprintf(stderr, "EEPROM write enable took %d ticks!\n", 400 - timer);
-	OUTW((EEPROM_ERASE << addrlen) + index, ioaddr + Wn0EepromCmd);
-	for (timer = 16000; inw(ioaddr + Wn0EepromCmd) & 0x8000;)
-		if (--timer < 0) {
-			fprintf(stderr, "EEPROM failed to erase index %d!\n", index);
-			return;
-		}
-	if (debug)
-		fprintf(stderr, "EEPROM erased index %d after %d ticks!\n",
-				index, 16000-timer);
-	OUTW(3 << (addrlen-2), ioaddr + Wn0EepromCmd);
-	for (timer = 400; inw(ioaddr + Wn0EepromCmd) & 0x8000;) {
-		if (--timer < 0)
-			goto error_return;
-	}
-	if (debug)
-		fprintf(stderr, "EEPROM write enable took %d ticks!\n", 400-timer);
-	OUTW(value, ioaddr + Wn0EepromData);
-	OUTW((EEPROM_WRITE << addrlen) + index, ioaddr + Wn0EepromCmd);
-	for (timer = 16000; inw(ioaddr + Wn0EepromCmd) & 0x8000;)
-		if (--timer < 0)
-			goto error_return;
-	if (debug)
-		fprintf(stderr, "EEPROM wrote index %d with 0x%4.4x after %d ticks!\n",
-				index, value, 16000-timer);
-	return;
-error_return:
-	fprintf(stderr, "Failed to write EEPROM location %d with 0x%4.4x!\n",
-			index, value);
-}
-
-int main(int argc, char **argv)
-{
-	unsigned int i, j, n;
-	unsigned int ioaddr;
-	unsigned long recvrstat;
-	unsigned char buf[128];
-	unsigned char b;
-
-	if (argc != 3) {
-		printf
-		    ("Usage: romid ioaddr [erase|protect|unprotect|id|bootrom|read >file|prog <file]\n");
-		exit(-1);
-	}
-#ifdef __FreeBSD__
-	/* get permissions for in/out{blw} */
-	open("/dev/io", O_RDONLY, 0);
-#else
-	setuid(0);		/* if we're setuid, do it really */
-	if (iopl(3)) {
-		perror("iopl()");
-		exit(1);
-	}
-#endif
-
-	sscanf(argv[1], "%x", &ioaddr);
-	/* Set the register window to 3 for the 3c905b */
-	OUTW(0x803, ioaddr + 0xe);
-	recvrstat = inl(ioaddr);	/* save the receiver status */
-	/* set the receiver type to MII so the full bios rom address space
-	   can be accessed */
-	OUTL((recvrstat & 0xf00fffff) | 0x00600000, ioaddr);
-
-	/* Set the register window to 0 for the 3c905b */
-	OUTW(0x800, ioaddr + 0xe);
-
-	if (strcmp(argv[2], "erase") == 0) {
-		/* do the funky chicken to erase the rom contents */
-		OUTL(0x5555, ioaddr + 0x4);
-		OUTB(0xaa, ioaddr + 0x8);
-		OUTL(0x2aaa, ioaddr + 0x4);
-		OUTB(0x55, ioaddr + 0x8);
-		OUTL(0x5555, ioaddr + 0x4);
-		OUTB(0x80, ioaddr + 0x8);
-		OUTL(0x5555, ioaddr + 0x4);
-		OUTB(0xaa, ioaddr + 0x8);
-		OUTL(0x2aaa, ioaddr + 0x4);
-		OUTB(0x55, ioaddr + 0x8);
-		OUTL(0x5555, ioaddr + 0x4);
-		OUTB(0x10, ioaddr + 0x8);
-		printf("Bios ROM at %04x has been erased\n", ioaddr);
-	} else if (strcmp(argv[2], "protect") == 0) {
-		OUTL(0x5555, ioaddr + 0x4);
-		OUTB(0xaa, ioaddr + 0x8);
-		OUTL(0x2aaa, ioaddr + 0x4);
-		OUTB(0x55, ioaddr + 0x8);
-		OUTL(0x5555, ioaddr + 0x4);
-		OUTB(0xa0, ioaddr + 0x8);
-		printf
-		    ("Software Data Protection for Bios ROM at %04x has been enabled\n",
-		     ioaddr);
-	} else if (strcmp(argv[2], "unprotect") == 0) {
-		OUTL(0x5555, ioaddr + 0x4);
-		OUTB(0xaa, ioaddr + 0x8);
-		OUTL(0x2aaa, ioaddr + 0x4);
-		OUTB(0x55, ioaddr + 0x8);
-		OUTL(0x5555, ioaddr + 0x4);
-		OUTB(0x80, ioaddr + 0x8);
-		OUTL(0x5555, ioaddr + 0x4);
-		OUTB(0xaa, ioaddr + 0x8);
-		OUTL(0x2aaa, ioaddr + 0x4);
-		OUTB(0x55, ioaddr + 0x8);
-		OUTL(0x5555, ioaddr + 0x4);
-		OUTB(0x20, ioaddr + 0x8);
-		printf
-		    ("Software Data Protection for Bios ROM at %04x has been disabled\n",
-		     ioaddr);
-	} else if (strcmp(argv[2], "id") == 0) {
-		OUTL(0x5555, ioaddr + 0x4);
-		OUTB(0xaa, ioaddr + 0x8);
-		OUTL(0x2aaa, ioaddr + 0x4);
-		OUTB(0x55, ioaddr + 0x8);
-		OUTL(0x5555, ioaddr + 0x4);
-		OUTB(0x90, ioaddr + 0x8);
-		/* 10ms delay needed */
-		printf("Manufacturer ID - ");
-		/* manuf. id */
-		OUTL(0x0000, ioaddr + 0x4);
-		printf("%02x\n", inb(ioaddr + 0x8));
-		/* device id */
-		OUTL(0x0001, ioaddr + 0x4);
-		printf("Device ID - %02x\n", inb(ioaddr + 0x8));
-		/* undo the funky chicken */
-		OUTL(0x5555, ioaddr + 0x4);
-		OUTB(0xaa, ioaddr + 0x8);
-		OUTL(0x2aaa, ioaddr + 0x4);
-		OUTB(0x55, ioaddr + 0x8);
-		OUTL(0x5555, ioaddr + 0x4);
-		OUTB(0xf0, ioaddr + 0x8);
-	} else if(strcmp(argv[2], "bootrom") == 0) {
-		printf("bootrom fix\n");
-		write_eeprom(ioaddr, 6, 19, 0x160);
-	} else if (strcmp(argv[2], "read") == 0) {
-		for (i = 0; i < 65536; i++) {
-			OUTL(i, ioaddr + 0x4);
-			b = inb(ioaddr + 0x8);
-			write(1, &b, 1);
-		}
-	} else if (strcmp(argv[2], "prog") == 0) {
-		/* program the rom in 128 bute chunks */
-		for (i = 0, n = 0; i < 65536; i += n) {
-			n = read(0, buf, 128);
-			if (n == 0)
-				break;
-			if (n < 0) {
-				perror("File Error");
-				exit(-3);
-			}
-			/* disable SDP temporarily for programming a sector */
-			OUTL(0x5555, ioaddr + 0x4);
-			OUTB(0xaa, ioaddr + 0x8);
-			OUTL(0x2aaa, ioaddr + 0x4);
-			OUTB(0x55, ioaddr + 0x8);
-			OUTL(0x5555, ioaddr + 0x4);
-			OUTB(0xa0, ioaddr + 0x8);
-			for (j = 0; j < n; j++) {
-				OUTL(i + j, ioaddr + 0x4);
-				OUTB(buf[j], ioaddr + 0x8);
-			}
-			/* wait for the programming of this sector to coomplete */
-			while (inb(ioaddr + 0x8) != buf[j - 1]);
-		}
-	}
-
-	/* Set the register window to 3 for the 3c905b */
-	OUTW(0x803, ioaddr + 0xe);
-	/* restore the receiver status */
-	OUTL(recvrstat, ioaddr);
-	return 0;
-}
-
-#endif				/* __i386__ */

contrib/3c90xutil/cromutil.c

@@ -1,259 +0,0 @@
-/*
- * JLdL 21Jun04.
- *
- * cromutil.c
- *
- * Perform various control operations on the flash EEPROM of
- * _ the 3COM models 3C905C or 3C905CX network cards, in order
- * _ to write a boot program such as Etherboot into it.
- *
- * This program is meant for the Linux operating system only,
- * _ and only for the i386 architecture.
- *
- * The flash EEPROM usually used in these cards is the AT49BV512
- * _ chip, which has 512 Kbit (64 KByte). Another possible chip,
- * _ which is equivalent to this one, is the SST39VF512.
- *
- * Added alternative read128 and prog128 commands for cards with
- * _ the SST29EE020 fast page-write (super-)flash EEPROM, which
- * _ has 2 Mbit (256 KByte), and which has to be programmed in
- * _ a 128-byte page mode. NOTE: it seems that the card can
- * _ address only the first half of the memory in this chip,
- * _ so only 128 Kbytes are actually available for use.
- *
- * Added a few informative messages and a detailed help message.
- *
- */
-
-#ifndef __i386__
-#  error "This program can't compile or run on non-Intel computers"
-#else
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/io.h>
-#include <string.h>
-
-int main(int argc, char **argv)
-{
-  /* Counters. */
-  unsigned int i, j, n;
-  /* For ROM chips larger than 64 KB, a long integer
-     _ is needed for the global byte counter. */
-  unsigned long k;
-  /* The I/O address of the card. */
-  unsigned int ioaddr;
-  /* Storage for a byte. */
-  unsigned char b;
-  /* Storage for a page. */
-  unsigned char buf[128];
-
-  /* Initialize a few things to avoid compiler warnings. */
-  i=0; j=0; n=0; k=0;
-
-  /* Verify the command-line parameters; write
-     _ out an usage message if needed. */
-  if (argc != 3) {
-    /* Exactly 2 command line parameters are needed. */
-    printf("Usage: ./cromutil ioaddr command [(>|<) file]\n");
-    printf(" (try './cromutil 0x0000 help' for details)\n");
-    exit(-1);
-  }
-
-  /* Set the UID to root if possible. */
-  setuid(0);
-
-  /* Get port-access permissions for in{blw}/out{blw}. */
-  if (iopl(3)) {
-    perror("iopl()");
-    exit(1);
-  }
-
-  /* Pass the I/O address of the card to a variable. */
-  sscanf(argv[1],"%x",&ioaddr);
-
-  /* Set the register window to 0. */
-  outw(0x800, ioaddr+0xe);
-
-  /*
-   * Execute the requested command.
-   *
-   * "id": get and write out the ID numbers.
-   */
-  if (strcmp(argv[2], "id") == 0) {
-    /* Software ID entry command sequence. */
-    outl(0x5555, ioaddr+0x4); outb(0xaa, ioaddr+0x8);
-    outl(0x2aaa, ioaddr+0x4); outb(0x55, ioaddr+0x8);
-    outl(0x5555, ioaddr+0x4); outb(0x90, ioaddr+0x8);
-    /* A 10 ms delay is needed. */
-    usleep(10000);
-    /* Get the manufacturer id. */
-    outl(0x0000, ioaddr+0x4);
-    printf("Manufacturer ID - %02x\n", inb(ioaddr+0x8));
-    /* Get the device id. */
-    outl(0x0001, ioaddr+0x4);
-    printf("Device ID - %02x\n", inb(ioaddr+0x8));
-    /* Software ID exit command sequence. */
-    outl(0x5555, ioaddr+0x4); outb(0xaa, ioaddr+0x8);
-    outl(0x2aaa, ioaddr+0x4); outb(0x55, ioaddr+0x8);
-    outl(0x5555, ioaddr+0x4); outb(0xf0, ioaddr+0x8);
-  }
-  /*
-   * "read": read data from the 512 Kbit ROM.
-   */
-  else if (strcmp(argv[2], "read") == 0) {
-    /* Loop over the whole ROM. */
-    for (k = 0; k < 65536; k++) {
-      outl(k, ioaddr+0x4);
-      b = inb(ioaddr+0x8);
-      write(1, &b, 1);
-    }
-    /* Write out an informative message. */
-    perror("Read 65536 bytes from ROM");
-  }
-  /*
-   * "read128": this alternative is for the 2 Mbit ROM.
-   */
-  else if (strcmp(argv[2], "read128") == 0) {
-    /* Loop over the accessible part of the ROM. */
-    for (k = 0; k < 131072; k++) {
-      outl(k, ioaddr+0x4);
-      b = inb(ioaddr+0x8);
-      write(1, &b, 1);
-    }
-    /* Write out an informative message. */
-    perror("Read 131072 bytes from ROM");
-  }
-  /*
-   * "erase": erase the ROM contents.
-   */
-  else if (strcmp(argv[2], "erase") == 0) {
-    /* Software chip-erase command sequence. */
-    outl(0x5555, ioaddr+0x4); outb(0xaa, ioaddr+0x8);
-    outl(0x2aaa, ioaddr+0x4); outb(0x55, ioaddr+0x8);
-    outl(0x5555, ioaddr+0x4); outb(0x80, ioaddr+0x8);
-    outl(0x5555, ioaddr+0x4); outb(0xaa, ioaddr+0x8);
-    outl(0x2aaa, ioaddr+0x4); outb(0x55, ioaddr+0x8);
-    outl(0x5555, ioaddr+0x4); outb(0x10, ioaddr+0x8);
-    /* Wait a bit. */
-    sleep(1);
-    /* Write out an informative message. */
-    printf("Bios ROM at %04x has been erased: Success\n", ioaddr);
-  }
-  /*
-   * "prog": program the 512 Kbit ROM.
-   */
-  else if (strcmp(argv[2], "prog") == 0) {
-    /* Loop over the bytes in pages, to
-       _ allow for a progress report. */
-    for (j = 0; j < 512; j++) {
-      for (i = 0; i < 128; i++) {
-	/* If this program is to run on a diskless node,
-	   _ must read in the byte _before_ changing the
-	   _ mode of the chip, or NFS may block. */
-	n = read(0, &b, 1);
-	/* At EOF exit the inner loop. */
-	if (n == 0)
-	  break;
-	if (n < 0) {
-	  perror("Input File Error");
-	  exit(-3);
-	}
-	/* Disable SDP temporarily for programming a byte. */
-	outl(0x5555, ioaddr+0x4); outb(0xaa, ioaddr+0x8);
-	outl(0x2aaa, ioaddr+0x4); outb(0x55, ioaddr+0x8);
-	outl(0x5555, ioaddr+0x4); outb(0xA0, ioaddr+0x8);
-	/* Calculate the address of the byte. */
-	k=i+128*j;
-	/* Program this byte. */
-	outl(k, ioaddr+0x4); outb(b, ioaddr+0x8);
-	/* Wait for the programming of this byte to complete. */
-	while (inb(ioaddr+0x8) != b)
-	  ;
-      }
-      /* At EOF exit the outer loop. */
-      if (n == 0)
-	break;
-      /* Write out a progress report. */
-      printf("."); fflush(NULL);
-    }
-    /* Write out an informative message. */
-    printf("\nWrote %ld bytes to ROM: Success\n", k);
-  }
-  /*
-   * "prog128": this alternative is for the 2 Mbit ROM.
-   */
-  else if (strcmp(argv[2], "prog128") == 0) {
-    /* Loop over the accessible pages; the card can
-       _ access only the first half of the chip. */
-    for (j = 0; j < 1024; j++) {
-      /* If this program is to run on a diskless node,
-	 _ must read in the page _before_ changing the
-	 _ mode of the chip, or NFS may block. */
-      n = read(0, buf, 128);
-      /* At EOF exit the loop. */
-      if (n == 0)
-	break;
-      if (n < 0) {
-	perror("Input File Error");
-	exit(-3);
-      }
-      /* Disable SDP temporarily for programming a page. */
-      outl(0x5555, ioaddr+0x4); outb(0xaa, ioaddr+0x8);
-      outl(0x2aaa, ioaddr+0x4); outb(0x55, ioaddr+0x8);
-      outl(0x5555, ioaddr+0x4); outb(0xA0, ioaddr+0x8);
-      /* Loop over the bytes in a page. */
-      for (i = 0; i < n; i++) {
-	/* Calculate the address of the byte. */
-	k=i+128*j;
-	/* Program this byte. */
-	outl(k, ioaddr+0x4); outb(buf[i], ioaddr+0x8);
-      }
-      /* Wait for the programming of this page to complete. */
-      while (inb(ioaddr+0x8) != buf[i-1])
-	;
-      /* Write out a progress report. */
-      printf("."); fflush(NULL);
-    }
-    /* Write out an informative message. */
-    printf("\nWrote %d pages to ROM: Success\n", j);
-  }
-  /*
-   * "help": write out a detailed help message.
-   */
-  else if (strcmp(argv[2], "help") == 0) {
-    printf("This utility can be used to write data, usually boot loaders\n");
-    printf("  such as Etherboot, to the flash EEPROM of the 3COM models\n");
-    printf("  3C905C and 3C905CX network cards. You use it like this:\n");
-    printf("        ./cromutil ioaddr command [(>|<) file]\n");
-    printf("Here ioaddr is the hexadecimal I/O address of the card, such\n");
-    printf("  as 0xA123, in some cases you need input/output redirection\n");
-    printf("  from/to a file, and the command can be one of these:\n");
-    printf("  id               get the ID numbers of the card;\n");
-    printf("  read > file      read the contents of the ROM into a file;\n");
-    printf("  read128 > file   read the contents of the ROM into a file;\n");
-    printf("  erase            erase the whole ROM to the 1 state;\n");
-    printf("  prog < file      write the contents of a file into the ROM;\n");
-    printf("  prog128 < file   write the contents of a file into the ROM.\n");
-    printf("You can get the I/O address of the card using the commands\n");
-    printf("  'lspci -v', 'cat /proc/pci', or 'dmesg | grep -i 3C905C'.\n");
-    printf("The read and prog commands are to be used if the card has a\n");
-    printf("  traditional 512 Kb (64 KB) flash EEPROM chip, such as:\n");
-    printf("  | AT49BV512 | SST39VF512 |\n");
-    printf("The read128 and prog128 versions are for cards with a 2 Mb\n");
-    printf("  (128 KB usable) page-write flash EEPROM chip, such as:\n");
-    printf("  | SST29EE020 |\n");
-  }
-  /*
-   * Write out the usage message if an unknown command is used.
-   */
-  else {
-    printf("Usage: ./cromutil ioaddr command [(>|<) file]\n");
-    printf("(try './cromutil 0x0000 help' for details)\n");
-    exit(-1);
-  }
-  return 0;
-}
-
-#endif /* __i386__ */

contrib/3c90xutil/ocromutil.c

@@ -1,104 +0,0 @@
-/*
- * 3c905cutil.c - perform various control ops on the 3C905C bios rom
- *             which we assume to be an AT49BV512
- *
- */
-
-#ifndef __i386__
-#  error "This program can't compile or run on non-intel computers"
-#else
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/io.h>
-#include <string.h>
-
-int main(int argc, char **argv)
-{
-  unsigned int ioaddr, i, n;
-  unsigned char b;
-
-  setuid(0); /* if we're setuid, do it really */
-  if (argc != 3) {
-    printf("Usage: romid ioaddr [erase|id|read >file|prog <file]\n");
-    exit(-1);
-  }
-  if (iopl(3)) {
-    perror("iopl()");
-    exit(1);
-  }
-  sscanf(argv[1],"%x",&ioaddr);
-
-  /* Set the register window to 0 for the 3C905C */
-  outw(0x800, ioaddr+0xe);
-
-  if (strcmp(argv[2], "erase") == 0) {
-    /* do the funky chicken to erase the rom contents */
-    outl(0x5555, ioaddr+0x4);
-    outb(0xaa, ioaddr+0x8);
-    outl(0x2aaa, ioaddr+0x4);
-    outb(0x55, ioaddr+0x8);
-    outl(0x5555, ioaddr+0x4);
-    outb(0x80, ioaddr+0x8);
-    outl(0x5555, ioaddr+0x4);
-    outb(0xaa, ioaddr+0x8);
-    outl(0x2aaa, ioaddr+0x4);
-    outb(0x55, ioaddr+0x8);
-    outl(0x5555, ioaddr+0x4);
-    outb(0x10, ioaddr+0x8);
-    sleep (1);
-    printf("Bios ROM at %04x has been erased\n", ioaddr);
-  } else if (strcmp(argv[2], "id") == 0) {
-    outl(0x5555, ioaddr+0x4);
-    outb(0xaa, ioaddr+0x8);
-    outl(0x2aaa, ioaddr+0x4);
-    outb(0x55, ioaddr+0x8);
-    outl(0x5555, ioaddr+0x4);
-    outb(0x90, ioaddr+0x8);
-    /* 10ms delay needed */
-    printf("Manufacturer ID - ");
-    /* manuf. id */
-    outl(0x0000, ioaddr+0x4);
-    printf("%02x\n", inb(ioaddr+0x8));
-    /* device id */
-    outl(0x0001, ioaddr+0x4);
-    printf("Device ID - %02x\n", inb(ioaddr+0x8));
-    /* undo the funky chicken */
-    outl(0x5555, ioaddr+0x4);
-    outb(0xaa, ioaddr+0x8);
-    outl(0x2aaa, ioaddr+0x4);
-    outb(0x55, ioaddr+0x8);
-    outl(0x5555, ioaddr+0x4);
-    outb(0xf0, ioaddr+0x8);
-  } else if (strcmp(argv[2], "read") == 0) {
-    for (i = 0; i < 65536; i++) {
-      outl(i, ioaddr+0x4);
-      b = inb(ioaddr+0x8);
-      write(1, &b, 1);
-    }
-  } else if (strcmp(argv[2], "prog") == 0) {
-    for (i = 0; i < 65536; i++) {
-      n = read(0, &b, 1);
-      if (n == 0)
-	break;
-      if (n < 0) {
-	perror("File Error");
-	exit(-3);
-      }
-      outl(0x5555, ioaddr+0x4);
-      outb(0xaa, ioaddr+0x8);
-      outl(0x2aaa, ioaddr+0x4);
-      outb(0x55, ioaddr+0x8);
-      outl(0x5555, ioaddr+0x4);
-      outb(0xA0, ioaddr+0x8);
-      outl(i, ioaddr+0x4);
-      outb(b, ioaddr+0x8);
-      while (inb(ioaddr+0x8) != b)
-	;
-    }
-  }
-  return 0;
-}
-
-#endif /* __i386__ */

contrib/3c90xutil/romutil.txt

@@ -1,36 +0,0 @@
-I wrote the attached little util program to try out the basic approach
-and thought that you might find it useful as well as providing some
-simple testing. It isn't a final solution so the interface is rough. The
-program must be run as root on an Intel based machine.
-
-The key point is that the IO address needs to be entered - I grab it
-from the dmesg output:
-
-eth0: 3Com 3c905B Cyclone 100baseTx at 0xe400,  00:10:4b:d2:5e:0d, IRQ
-11
-
-or "cat /proc/pci" to find the "I/O at XXXXXX" for your 3Com Card.
-
-Some example commands are:
-
-romutil 0xe400 erase            - erases the ROM contents
-romutil 0xe400 protect            - enables the Software Data Protection
-on the ROM [3c905B only]
-romutil 0xe400 unprotect       - disables the Software Data Protection
-on the ROM [3c905B only]
-romutil 0xe400 id                    - displays the manufacturer and
-device IDs
-romutil 0xe400 read >file    - writes the contents of the ROM to stdout
-romutil 0xe400 prog <file    - writes the contents of the stdin into the
-ROM (<64k)
-
-I tried reading and writing the ROM while doing large ftp transfers and
-experienced no problems. I didn't spend much time worrying about the
-possible race conditions. My system has lots of resources (450MHx P2,
-128MB RAM) so it might not provide the best test candidate.
-
-Let me know what results you get if you try it out.
-
-Thanks
-
-John

contrib/Diskless-From-NT/Config.txt

@@ -1,537 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_X86=y
-CONFIG_ISA=y
-# CONFIG_SBUS is not set
-CONFIG_UID16=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_KMOD is not set
-
-#
-# Processor type and features
-#
-CONFIG_M386=y
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
-# CONFIG_M686FXSR is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP2 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_X86_CMPXCHG is not set
-CONFIG_X86_L1_CACHE_SHIFT=4
-# CONFIG_TOSHIBA is not set
-# CONFIG_MICROCODE is not set
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_CPUID is not set
-CONFIG_NOHIGHMEM=y
-# CONFIG_HIGHMEM4G is not set
-# CONFIG_HIGHMEM64G is not set
-CONFIG_MATH_EMULATION=y
-CONFIG_MTRR=y
-# CONFIG_SMP is not set
-# CONFIG_X86_UP_IOAPIC is not set
-
-#
-# General setup
-#
-CONFIG_NET=y
-# CONFIG_VISWS is not set
-CONFIG_PCI=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-# CONFIG_PCI_NAMES is not set
-CONFIG_EISA=y
-# CONFIG_MCA is not set
-CONFIG_HOTPLUG=y
-
-#
-# PCMCIA/CardBus support
-#
-# CONFIG_PCMCIA is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-# CONFIG_ACPI is not set
-# CONFIG_APM is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_AMIGA is not set
-# CONFIG_PARPORT_MFC3 is not set
-# CONFIG_PARPORT_ATARI is not set
-# CONFIG_PARPORT_SUNBPP is not set
-# CONFIG_PARPORT_OTHER is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=m
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_FILTER is not set
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_IPV6 is not set
-# CONFIG_KHTTPD is not set
-# CONFIG_ATM is not set
-
-#
-#  
-#
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-# CONFIG_BLK_DEV_IDE_MODES is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_ISA=y
-# CONFIG_E2100 is not set
-# CONFIG_EEXPRESS is not set
-# CONFIG_EEXPRESS_PRO is not set
-# CONFIG_HPLAN_PLUS is not set
-# CONFIG_HPLAN is not set
-# CONFIG_ETH16I is not set
-CONFIG_NE2000=y
-# CONFIG_SK_G16 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_SERIAL=y
-# CONFIG_SERIAL_CONSOLE is not set
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-CONFIG_MOUSE=y
-CONFIG_PSMOUSE=y
-# CONFIG_82C710_MOUSE is not set
-# CONFIG_PC110_PAD is not set
-
-#
-# Joysticks
-#
-
-#
-# Game port support
-#
-
-#
-# Gameport joysticks
-#
-
-#
-# Serial port support
-#
-
-#
-# Serial port joysticks
-#
-
-#
-# Parallel port joysticks
-#
-# CONFIG_QIC02_TAPE is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_INTEL_RNG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-CONFIG_AGP=m
-CONFIG_AGP_INTEL=y
-CONFIG_AGP_I810=y
-CONFIG_AGP_VIA=y
-# CONFIG_AGP_AMD is not set
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_ALI is not set
-# CONFIG_DRM is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BFS_FS is not set
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-# CONFIG_UMSDOS_FS is not set
-CONFIG_VFAT_FS=m
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_CRAMFS is not set
-# CONFIG_RAMFS is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_SUNRPC=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_SMB_NLS is not set
-CONFIG_NLS=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Console drivers
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VIDEO_SELECT is not set
-# CONFIG_MDA_CONSOLE is not set
-
-#
-# Frame-buffer support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-CONFIG_SOUND_ES1371=m
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-CONFIG_SOUND_VIA82CXXX=m
-CONFIG_SOUND_OSS=m
-# CONFIG_SOUND_TRACEINIT is not set
-# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_AD1816 is not set
-# CONFIG_SOUND_SGALAXY is not set
-# CONFIG_SOUND_ADLIB is not set
-# CONFIG_SOUND_ACI_MIXER is not set
-# CONFIG_SOUND_CS4232 is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_GUS is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_NM256 is not set
-# CONFIG_SOUND_MAD16 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
-CONFIG_SOUND_SB=m
-# CONFIG_SOUND_AWE32_SYNTH is not set
-# CONFIG_SOUND_WAVEFRONT is not set
-# CONFIG_SOUND_MAUI is not set
-CONFIG_SOUND_YM3812=m
-# CONFIG_SOUND_OPL3SA1 is not set
-# CONFIG_SOUND_OPL3SA2 is not set
-# CONFIG_SOUND_YMPCI is not set
-# CONFIG_SOUND_YMFPCI is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_MAGIC_SYSRQ is not set

contrib/Diskless-From-NT/Diskless-From-NT.txt

@@ -1,565 +0,0 @@
-
-
-The Diskless Terminal running from NT server Mini-HOWTO
-Pavel Tkatchouk, ptkatcho@portal.ca
-v0.1, June 19th 1999
-
-Table of Contents
-
-1. Introduction.
-
-   1.1 What is it for?
-   1.2 Do we need this HOWTO?
-   1.3 A bit of History.
-
-2. Project description.
-
-   2.1 Packaging.
-   2.2 Image.
-      2.2.1 Kernel.
-      2.2.2 MRFS.
-      2.2.3 Building MRFS.
-   2.3 Remotefs.
-   2.4 Booting sequence.
-      2.4.1 BOOTP, TFTP.
-   2.5 Bootprom.
-
-3. Resources.
-
-4. Copyright.
-
-5. Feedback and credits.
-
-
-1. Introduction.
-
-
-1.1. What is it for?
-
-This document describes how to build software distribution to run Java client on diskless 
-terminal booted from Microsoft Windows 95/98/NT workstation. Package can also be easily 
-modified to be used as Linux terminal or X Windows terminal's software. I found it also 
-convenient for setup over the Ethernet of floppyless PS's, hard disk of which for some 
-reason can not be accessed (sealed case under warranty, etc.).
-
-
-1.2. Do we need this HOWTO?
-
-To be honest, I'm not sure. There are few excellent HOWTO's (see 3. Recources) that up until 
-recently I considered quite sufficient to build what I've done two years ago. But since my 
-project uses MS Windows as a file server vs. traditional NFS there were some know-how's 
-involved which number of people wanted to see in some formal document.
-
-
-1.3. A bit of history.
-
-My project at that time (1996) was to find OS/JVM that will allow to run Java application 
-on hardware we manufacture. Hardware is practically generic x86 PC except it has no keyboard, 
-hard drive, floppy drive, mouse, but touchscreen over LCD, plus some POS specific peripherals 
-(badge reader, credit card reader, etc.). Due to cost consideration it had no any significant 
-storage, so OS and Java client along with support binaries, libraries etc. had to be loaded 
-remotely. Because our clients are exclusively Windows shops, Server had to be Windows as well. 
-During evaluation of different commercial OS'es along with JVM's available it become apparent 
-to my surprise that most promising solution was GPL one - Linux.
-
-
-2. Project description.
-
-2.1. Packaging.
-
-The whole distribution consists of remote file system (RemoteFS) residing on MS Windows
-server (NT Workstation, NT Server or Windows9x) and tagged bootable image. 
-
-
-2.2. Image.
-
-Image (~1.5MB) is generated by mknbi utility that comes with Etherboot package
-<http://etherboot.sourceforge.net>. It can include minimal root file system (MRFS) 
-like in my case (since I had to boot client from MS Windows server and Linux kernel doesn't 
-support SMBFS-Root, only NFS-Root. So I had to keep rootfs in the ramdisk). To generate 
-image the following script can be used.
-
-#!/bin/sh
-# mkrootnet: makes tagged netbootable image
-# This image includes kernel and minimal root filesystem
-# to do initial boot.
-#
-# Copyright (c) Pavel Tkatchouk 1996. All rights reserved.
-# Permission is granted for this material to be freely
-# used and distributed, provided the source is acknowledged.
-# No warranty of any kind is provided. You use this material
-# at your own risk.
-#
-DEVICEFILENAME="/tmp/file"		# temporary file to be used as device
-FSBLOCKS=4096   				# uncompressed filesystem size in K
-BOOTDISKDIR="/usr/BOOT/ROOTFS"	# root filesystem model
-MOUNT="/mnt2"				# temporary mount point
-ROOTFS="/tmp/rootfs"			# root filesystem image
-ROOTFSGZ="/tmp/rootfs.gz"		# compressed root filesystem image
-KERNEL="/usr/KERNELS/vmlinuz-nt"	# kernel image
-KERNELTMP="/tmp/vmlinuz"		# temporary copy of kernel image
-BOOTIMAGE="/tmp/img"			# tagged image to be booted by client
-# if you want ramisk more than default 4096 set CMDLINE, don't forget to
-# adjust $FSBLOCKS 
-# CMDLINE="ramdisk_size=8192"		# parameters to pass to the kernel
-# 
-echo "check:"
-echo "- if tftp server's download dir mounted to /mnt"
-echo "- loopback device is built-in or loaded"
-echo "\n press Enter when done"
-read tmp 
-UPLOAD="/mnt/tmp"				# tftp server's dir to upload bootimage
-echo -e "\nZeroing $DEVICEFILENAME of $FSBLOCKS k"
-echo "to be used as device for root filesystem model"
-dd if=/dev/zero of=$DEVICEFILENAME bs=1k count=$FSBLOCKS
-echo -e "\nMaking file system on $DEVICEFILENAME"
-mke2fs -m 0 $DEVICEFILENAME
-echo "Mounting $DEVICEFILENAME as a loopback device"
-mount -o loop -t ext2 $DEVICEFILENAME $MOUNT
-curdir=`pwd`
-cd $BOOTDISKDIR
-echo -e "Copying files from $BOOTDISKDIR to $DEVICEFILENAME, please wait"
-find . -print|cpio -pmd $MOUNT
-echo "Unmounting $MOUNT"
-umount $MOUNT
-cd $curdir
-echo "Copying $DEVICEFILENAME to $ROOTFS"
-dd if=$DEVICEFILENAME of=$ROOTFS bs=1k
-echo "Compressing $ROOTFS, it may take a while"
-echo "Please wait..."
-if [ -f $ROOTFSGZ ];then
-	rm -f $ROOTFSGZ
-fi
-gzip -c $ROOTFS>$ROOTFSGZ
-rm -f $ROOTFS
-echo -e "\nCreating netbootable image"
-cp $KERNEL $KERNELTMP
-mknbi -d ram -i rom -r $ROOTFSGZ -k $KERNELTMP -a $CMDLINE -o $BOOTIMAGE
-echo "Uploading $BOOTIMAGE to $UPLOAD"
-cp $BOOTIMAGE $UPLOAD
-echo "Cleaning after ourselves"
-rm -f $KERNELTMP $DEVICEFILENAME $BOOTIMAGE
-echo "All done"
-
-
-In the above script actual image is generated by the following comand
-
-#mknbi -d ram -i rom -r rootfs.gz -k vmlinuz-nt -o img
-
-where:
-	rootfs.gz - minimal root file system (MRFS);
-	vmlinuz-nt   - kernel;
-	img       - resulting image.
-
-
-Note:
-Default ramdisk size is 4096. It was enough for RedHat4.1 based minimal file system, but 
-apparently not enough for 5.2 based. When this happens "end request:I/O error, dev 01:00 ..." 
-error shows up. To fix that either use "mknbi -a ramdisk_size=8192" to pass parameter to the 
-kernel (doesn't require kernel recompilation), or change /usr/src/linux/drivers/block/rd.c: 
-int rd_size= from 4096 to 8192 or whatever and rebuild the kernel.                                                    
-
-
-2.2.1. Kernel.
-
-Kernels 2.0.30 and 2.0.36 have been used by author, although nothing is preventing you from
-experimenting with others. Kernel should include ramdisk support. The following 
-<link to .config> configuration has been used to build <link to binary (kernel 2.0.30)>. 
-You may find some components unnecessary, just exclude them and rebuild. 
-
-Don't forget to change root device after you built the kernel (rdev vmlinuz /dev/rd).
-
-Gotcha's: apparently smbfs is broken in 2.2.x kernels. Symptoms: remote share is mounted
-just fine but after a while fails with "smb_request: result = -32" errmsg. I've heard
-SuSe has fix for that.
-
-2.2.2. MRFS.
-
-Minimal root file system is required to get Linux up and running along with networking until 
-it can mount remote file system to run X/Java from there. After image gets loaded from the 
-server MRFS is decompressed into ramdisk. If you can afford a lot of ram on your terminal the 
-entire remote file system can be moved to rootfs.gz. That will make your terminal more 
-responsive.
-
-
-2.2.3. Building MRFS.  
-
-Some folks found it easier to start from scratch, others use known "minimal" Linux distributions
-(Linux Router, tomsrtbt, etc.), yet others prefer to start from "big" Linuces like I did. Every
-path has it's pro and contras.
-
-Pruning standard distribution (RedHat, Debian, etc.) to your needs might be very time consuming.
-To ease that painful process I have used remotely booted diskless client with NFS-Root (see 
-Etherboot's Readme, NFS-Root and NFS-Root-Client mini-HOWTO's, Diskless-HOWTO):
-
-- setup minimal RedHat4.1 install (networked workstation, X, no development, mail, etc., ~117MB);
-- find . -print|cpio -pmd /usr/NFS/ROOTFS - copy entire fs tree to NFS exported dir;
-- mknod /usr/NFS/ROOTFS/dev/nfsroot b 0 255;
-- build vmlinuz-nfs kernel according to NFS-Howto (built-in bootp,rarp,NFS,NFS root,NIC 
-  driver,RAM disk);
-- rdev vmlinuz-nfs /dev/nfsroot - to set NFS root device; 
-- build image for NFS-Root fs:
-  #mknbi -d rom -i rom -k vmlinuz-nfs -o nfsImage;
-- boot client while monitoring NFS file requests (by Solaris snoop);
-- copy files from /usr/NFS/ROOTFS to /usr/BOOT/ROOTFS (MRFS model) according to snoop's
-  filelist;
-- generate image by mkrootnet script (don't forget to point to the right kernel vmlinuz-nt).
-
-The above trick not only allows to determine the sought files set but also debug boot process 
-analyzing NFS messages. I found it convenient to put "read tmp" statements into init scripts
-for debugging. Tracking files up until issuing login gives you <link to rootfs.gz> MRFS (~1MB) 
-that can be used to boot Linux from ROM (flash, eprom, DiskOnChip, SanDisk, etc.) as well. All 
-the other files requested by client (during starting X, Java, Java client) were put into (link 
-to remotefs.zip, ~9MB).
-
-
-To restore MRFS model on your PC from the above rootfs.gz:
-- #cd /tmp
-- #gunzip rootfs.gz
-- #mount -o loop -t ext2 /tmp/rootfs /mnt
-- #cd /mnt
-- #find . -print|cpio -pmd /usr/BOOT/ROOTFS
-- #umount /mnt
-
-Note: 
-
-You will have to change attributes of some dirs, files (/etc/mtab, /etc/mtab~, /var/lock/subsys/*, 
-/var/run/*, /dev/tty*, etc.) against standard. This is because with standard attribs diskless 
-client refused to work. For example I had to change /dev/tty* ownerships to 99:99 from original 
-0:0 or 0:5, to get rid of errmsg "INIT: Id "1" respawning too fast: disabled for 5 minutes". 
-Being admin illiterate I just chmod them to 777 and chown to 99:99 to make life easier. 
-THIS IS SERIOUS SECURITY VIOLATION!!! Using keyboardless terminal with no daemons running in 
-my case reduces the risk, yet I would appreciate very much those more experienced who will help 
-to restore the right attribs while keeping the distribution working.
-
-Some "gotcha's" to watch for during MRFS building:
-- standard attributes/ownership of some files don't work;
-- rdev must be set (non-tagged image didn't work, so couldn't use config file to pass parrs 
-  to the kernel);
-- diskless client writes 99:99 ownership on generated files;
-- "password incorrect" for root, but any other OK and su OK too.
-
-
-2.3. RemoteFS.
-
-Remotefs.zip file includes everything required by the system that can be located on
-remote file system, i.e after booting has been complete and remote file system mounted.
-In my case it is X Windows System and Java binaries, libraries etc. To use that file on
-MS Windows NT:
-- unzip remotefs.zip to some directory;
-- share this directory read-only as "usr" (or share as some other name and pass this name to
-  the client through bootptab configuration file for BOOTP server;
-- create an account username=root, password=linux on NT (can be set in bootptab).
-
-Note:
-There's no symbolic links on NTFS, so UNIX links must be replaced by copies on NTFS. 
-To determine potential troublmakers one could use the following:
-- first copy required subset (according to snoop's intercept) from /usr/NFS/ROOTFS to 
-  /usr/BOOT/REMOTEFS;
-- mount some share from NTFS to /mnt;
-- /usr/BOOT/REMOTEFS#find . -print|cpio -pmd /mnt 2>links;
-In the links file you will find names to work with.
-
-
-2.4. Booting sequence.
-
-Boot occurs in the following sequence:
-- bootprom sends bootp request,
-- bootp server responds with subnet mask, client's name, client's IP, TFTP server's IP, 
-  bootfile name and some optional parameters (like NT's username/password to use it's share,
-  you could pass some other share name here as say T104="somedir");
-- bootprom downloads image from TFTP server;
-- kernel starts;
-- kernel decompresses MRFS in RAM;
-- system starts init using ramdisk root,
-- mounts remote file system from NT via SMBFS;
-- automatically logins;
-- starts xstart script located on remotefs (/usr/sbin) where you can start any of your
-  programs, change parameters, etc. without rebuilding the image.
-
-Below are some config/init sample files from <rootfs.gz>, <remotefs.zip>:
-
-<bootptab, change to link>
-t1:sm=255.255.255.0:sa=192.168.33.150:bf=img:T100="pavelnt4":T101="root":T102="linux"
-touch1:hn=touch1:tc=t1:ha=00A0F00035CD:ip=192.168.33.127
-
-</etc/fstab, change to link>:
-/dev/ram  /      ext2    defaults    1 1
-/proc     /proc  proc    defaults    0 0
-
-</etc/rc.d/rc.bootp, change to link later>:
-#!/bin/sh
-# Written to simply set the IP stuff up from the
-# bootpc data.
-# Last updated : Mon Mar 10 15:17:01 1997
-#
-# Variables
-
-BOOTPC=/sbin/bootpc
-IFCONFIG=/sbin/ifconfig
-ROUTE=/sbin/route
-BINHOST=/bin/hostname
-DEV=eth0
-ASKSERVER="255.255.255.255"
-TW="--timeoutwait 320"
-RIF="--returniffail"
-RIFMESSAGE="Bootp failed -- disabling network."
-RCONF=/etc/resolv.conf
-EHOSTS=/etc/hosts
-LHOSTS=/etc/hosts.local
-TMPFILE=/tmp/bootp
-# Functions
-# Remove the networking by taking down the interface
-netdown() {
-  ${ROUTE} del default
-  ${IFCONFIG} ${DEV} down
-}
-## End of the functions
-
-## Start of the actual work
-# Bring up minimal networking use 0.0.0.0 as our address as we don't
-# know it yet (Means "Me but I don't know my address or network")
-${IFCONFIG} ${DEV} up 0.0.0.0
-${ROUTE} add default dev ${DEV}
-
-# Perform the bootp  --  doesn't return unless it gets an answer
-if ${BOOTPC} --dev ${DEV} --server ${ASKSERVER} ${RIF} ${TW} > ${TMPFILE}
-then
-# Take down networking (use the 0.0.0.0 for as short a time as possible)
-  netdown
-# Read in the values   
-  . ${TMPFILE}
-
-# To use in mountsmb script later
-SMBSERVER=${T100}
-# And delete the temporary file
-#  rm ${TMPFILE}
-else
-# Take down networking (use the 0.0.0.0 for as short a time as possible)
-  netdown
-# give message and quit
-  echo ${RIFMESSAGE}
-  exit 1
-fi
-
-# Start the loopback interface and add a route to it
-# It's already set by standard init?
-${IFCONFIG} lo 127.0.0.1
-${ROUTE} add -net 127.0.0.0
-
-# Setup of IP stuff needs doing first
-#
-if [ -z "${NETMASK}" ] ; then
-# No netmask info, all this is guessed from the IP number
-# If this is wrong for your network FIX the bootpd to know
-# what it should send in the RFC1497 cookie!  11/02/94 JSP
-#
-  ${IFCONFIG} ${DEV} up ${IPADDR} broadcast ${BROADCAST} 
-  ${ROUTE} -n add -net ${NETWORK} dev ${DEV}
-else
-# We will have NETMASK, BROADCAST, and NETWORK defined 
-  ${IFCONFIG} ${DEV} up ${IPADDR} broadcast ${BROADCAST} netmask ${NETMASK} 
-  ${ROUTE} -n add -net ${NETWORK} dev ${DEV}
-fi
-
-# Set the hostname from what we got via bootp or reverse lookup
-
-echo "127.0.0.1	loopback localhost">${EHOSTS}
-${BINHOST} "${HOSTNAME}"
-echo "${IPADDR}	${HOSTNAME}" >>${EHOSTS}
-echo "${SERVER} ${SMBSERVER}" >>${EHOSTS}
-
-
-</etc/rc.d/rc.local, change to link>:
-#!/bin/sh
-# This script will be executed *after* all the other init scripts.
-# You can put your own initialization stuff in here if you don't
-# want to do the full Sys V style init stuff.
-#
-# 07/02/97 Pavel Tkatchouk
-#
-echo "Start networking"
-insmod /lib/8390.o
-insmod /lib/ne.o io=0x300 irq=9
-echo "Install serial"
-insmod /lib/serial.o
-echo "Install touch"
-insmod /lib/touch.o
-echo "Install smbfs"
-insmod /lib/smbfs.o
-echo "Getting TCP/IP parameters from bootp server"
-echo "and start networking"
-/etc/rc.d/rc.bootp
-if [ -f /etc/squirrel-release ]; then
-	R=$(cat /etc/squirrel-release)
-else
-	R="release 0.02"
-fi
-echo "Mounting remote fs"
-/sbin/mountsmb
-echo "XYZ Inc. Diskless Linux $R"
-echo "Starting X and Java client without login"
-su -c /sbin/xstart root
-
-
-</usr/sbin/xstart, change to link>:
-#!/bin/bash
-#
-# Script to start X and Java client
-# 08/07/97 Pavel Tkatchouk
-#
-# Read bootps response first
-. /tmp/bootp
-# -s 0 to disable screen-saver
-/usr/X11R6/bin/X -s 0 &
-export DISPLAY=:0.0
-# /usr is share mounted from Windows workstation
-cd /usr/program/
-java SomeJavaApp 
-
-
-</sbin/mountsmb, change to link>:
-#!/bin/bash
-# mountsmb: mounts remote filesystems from NT workstation 
-# using Microsoft's SMB protocol 
-# 
-# Copyright (c) Pavel Tkatchouk 1997. All rights reserved.
-# Permission is granted for this material to be freely
-# used and distributed, provided the source is acknowledged.
-# No warranty of any kind is provided. You use this material
-# at your own risk.
-#
-# Last edit June 29 8:30 1997
-#
-MOUNTDIR="usr"
-SHRDIR="usr"
-BOOTPRES="/tmp/bootp"
-# Read botpc response
-. ${BOOTPRES}
-# Sharename from NT server, uncomment if you want to use 
-# non-hardcoded "usr" but from bootptab
-#SHRDIR=${T104} 
-SMBSRV="//${T100}"
-CLIENT="${HOSTNAME}"
-USER="${T101}"
-PASSWORD="${T102}"
-echo -e "\nMounting $SMBSRV/$SHRDIR to /$MOUNTDIR"
-smbmount $SMBSRV/$SHRDIR $MOUNTDIR -c $CLIENT -U $USER -P $PASSWORD
-echo -e "\nDone"
-
-Gotcha's:
-Looks like smbmount client from smbfs package used to mount remote Windows shares to local 
-Linux dirs in pre 2.2.x era isn't maintained anymore so you should use one coming with 
-Samba package. Also binary smbmount won't work with 2.2.x, so you have to recompile with 
-2.2.x headers following Samba's readme. Yet even that won't guarantee reliable work until
-somebody fixes kernel's smbfs module.
-
-2.4.1. BOOTP, TFTP.
-
-There are number of BOOTP, TFTP servers for Windows on the market. You could find them
-here:
-
-- www.walusoft.co.uk (Walusoft's tftp);
-- ftp.coast.net/simtel/nt/internet/tftpds12.zip (Millwood AB's tftp);
-- ftp.cabletron.com/pub/snmp/bootftp/boottft2.zip (Cabletron's bootp/tftp combo);
-- www.tellurian.au.com (Tellurian's bootp, tftp, dhcp servers).
-- www.metainfo.com (Metainfo's DHCP server)
-- www.nts.com (Network Telesystems's DHCP server in IPserver package)
-
-My choice was Tellurian's products - very reliable, simple to install, attractively priced
-(fully capable evaluation versions are available).
-
-2.5. Bootprom.
-
-Ken Yap's Etherboot <etherboot.sourceforge.net> will tell you everything about bootprom. 
-Here I just want to mention that normally you would have to put bootprom's code into network
-adapter's PROM. But if your hardware like mine has BIOS programmed in flash you could 
-re-program it to add bootprom (some BIOS requires special programmer to do that, others don't)
-as BIOS extension.
-
-This is what I did to add ne.rom (bootprom generated by Etherboot's makerom for NE2000 clone) 
-to AMI BIOS on my flash:
-
-- read flash content by programmer into bios.bin binary file;
-- use one of available binary editors (say www.simtel.net/Win95/editors/hxp3005.zip to add
-  ne.rom to bios.bin (and to edit ne.rom if necessary);
-- write new bios.bin back to flash.
-
-Notes:
-- makerom generates bootprom for standard EPROM sizes (8k, 16k, 32k, etc.), so if you tight on 
-  space use -s flag to adjust size (or cut it manually to multiple of 512 bytes blocks, just
-  don't forget to adjust extension's length which is coded in Byte 2 and checksum to 8 bits 
-  of zero;
-- valid absolute addresses for BIOS extensions are from 0xC8000 to 0xF4000 (check with 
-  motherboard's manufacturer how flash is mapped onto system memory space);
-- Byte 0 must be 0x55, Byte 1 must be 0xAA, Byte 2 must be extension's length in 512 bytes 
-  blocks;
-- extension BIOS has to start at a 2k boundary;
-
-
-3. Resources.
-
-FAQ's:
-- tomsrtbt.FAQ (www.toms.net);
-
-HOWTO's:
-- Paul Moody's miniHOWTO (www.linuxembedded.com/pmhowto.html)
-- Diskless;
-- Diskless-HOWTO;
-- NFS-Root;
-- NFS-Root-Client;
-- Bootdisk-HOWTO;
-- BootPrompt-HOWTO;
-- NCD-X-Terminal;
-- Remote-Boot;
-- Remote-X-Apps;
-
-Web:
-- etherboot.sourceforge.net/
-- www.waste.org/~zanshin
-- www.tellurian.com.au.
-- www.toms.net
-- www.trinux.org
-- www.linux.org.uk/ELKS-Home
-- www.embedded.com
-- www.linuxembedded.com
-- www.thinlinux.org
-- www.linuxrouter.org
-- linux-mandrake.com
-- www.disklessworkstations.com
-
-Newsgroups:
-- comp.arch.embedded
-
-Lists:
-- netboot-owner@baghira.han.de
-- linux-embedded@waste.org
-
-Magazines:
-- Circuit Cellar #100 - 105
-
-
-4. Copyright.
-
-Copyright (c) Pavel Tkatchouk 1999.
-Permission is granted for this material to be freely used and distributed, provided the source 
-is acknowledged. Copyright policy is GPL as published by the Free Software Foundation.
-
-No warranty of any kind is provided. You use this material at your own risk.
-
- 
-
-5. Feedback and credits.
-
-Since I am neither have a lot of Linux experience nor native English speaker, there would be 
-errors in this document. I would accept any help with gratitude whether in form of proof-reading, 
-techical corrections or otherwise. Please send your comments, suggestions and questions to Pavel 
-Tkatchouk (ptkatcho@portal.ca)
-
-I wish to thank Pierre Mondie who convinced me to start this document. I'm also very much in 
-debt to all those who's work made this project possible:
-
-Ken Yap 		<ken_yap@users.sourceforge.net>	(Etherboot)
-David Newall 	<www.tellurian.com.au>	(Bootpdnt/Ftpdnt)
-(to be continued)
-

contrib/Diskless-From-NT/furtmayr.html

@@ -1,82 +0,0 @@
-<html>
-
-<head>
-<title>Free TFTP / Syslog / NFS Servers for Windows</title>
-</head>
-
-<body>
-
-<h3 align="center">Free TFTP / Syslog / NFS Servers for Windows</h3>
-<div align="center"><center>
-
-<address>
-  Stefan Furtmayr (<a href="mailto:sf@paf.net">sf@paf.net</a>) 
-</address>
-</center></div>
-
-<p>Feel free to send me your comments about these programs or some additions.</p>
-
-<p>Also have a look at the <a
-href="http://www.ltsp.org/contrib/diskless-windows-howto.htm">&quot;Diskless Windows
-Cookbook &quot;</a> in the <a href="http://www.ltsp.org/contrib/">LTSP Contrib Area</a>.</p>
-
-<p><small>From this list I have only used the W2K-TFTP once for a customer with the <a
-href="http://support.3com.com/infodeli/tools/nic/mba.htm">3Com MBA Utility Disk</a>, while
-it can be used as well with <a href="http://etherboot.sourceforge.net">Etherboot</a>
-tagged images for other NIC brands.</small><br>
-<small>The solution used a netbooted DOS with MS Client 3.0 to easily restore disk images
-with <a href="http://www.ghost.com/">Symantec Ghost</a> (see <a
-href="http://appdeploy.com/tools/imaging.shtml">appdeploy.com</a> for similar tools).</small><br>
-<small>Sure there are several possibilities to do this with Linux but for cloning NT4/W2K
-the NTFS support is rather experimental and automatically changing the SID is another
-issue.</small></p>
-
-<h4>TFTP Servers:</h4>
-
-<p>In Autumn 2000 i tested some different TFTP servers and found out that most of them do
-not install/run as a service, especially under W2K. 
-
-<ul>
-  <li>TFTP server included with Windows 2000 (remote installation services need to be
-    installed)<br>
-    The path for the images has to be specified via registry:<br>
-    Q232115 - Changing the Drive or Volume on Which Remote Installation Images Reside:<br>
-    <a href="http://support.microsoft.com/support/kb/articles/Q232/1/15.ASP">http://support.microsoft.com/support/kb/articles/Q232/1/15.ASP</a></li>
-  <li>3CDaemon version 2.0 revision 10. Freeware. Integrated TFTP/FTP/Syslog Daemon for
-    Windows 95/98/NT<br>
-    <a href="ftp://ftp.3com.com/pub/utilbin/win32/3cdv2r10.zip">ftp://ftp.3com.com/pub/utilbin/win32/3cdv2r10.zip</a><br>
-    - Windows 2000 Server: does not run as service!<br>
-    - Windows NT Server 4.0: not tested</li>
-  <li>The TFTP Server portion of 3CServer, altered to run as a system Service under Windows NT<br>
-    <a href="ftp://ftp.3com.com/pub/utilbin/win32/3CTftpSvc.zip">ftp://ftp.3com.com/pub/utilbin/win32/3CTftpSvc.zip</a><br>
-    - Windows 2000 Server: only working in debug mode, does not run as service!<br>
-    - Windows NT Server 4.0: not tested</li>
-  <li>Cisco TFTP Server v.1.1<br>
-    <a href="http://www.cisco.com/pcgi-bin/tablebuild.pl/tftp">http://www.cisco.com/pcgi-bin/tablebuild.pl/tftp</a><br>
-    Does not provide an option itself to install as service.</li>
-  <li><a href="http://solarwinds.net/Tools/Free_Tools/TFTP_Server/">http://solarwinds.net/Tools/Free_Tools/TFTP_Server/</a><br>
-    Does not provide an option itself to install as service.</li>
-</ul>
-
-<p><em>Untested:</em></p>
-
-<p>found on <a href="http://www.nonags.com/nonags/servd32.html">http://www.nonags.com/nonags/servd32.html</a><br>
-- <a href="http://www.klever.net/kin/pumpkin.html">http://www.klever.net/kin/pumpkin.html</a><br>
-- <a href="http://membres.tripod.fr/phjounin//P_tftpd32.htm">http://membres.tripod.fr/phjounin//P_tftpd32.htm</a></p>
-
-<h4>Syslog Servers:</h4>
-
-<ul>
-  <li>3Com Software Library - Utilities for 32 bit Windows<br>
-    <a href="http://support.3com.com/software/utilities_for_windows_32_bit.htm">http://support.3com.com/software/utilities_for_windows_32_bit.htm</a></li>
-  <li><a href="http://www.netal.com/download.htm#SL4NT03">http://www.netal.com/download.htm#SL4NT03</a>
-    (works as service) </li>
-</ul>
-
-<h4>NFS Servers:</h4>
-
-<ul>
-  <li>War NFS Daemon: <a href="http://www.jgaa.com">http://www.jgaa.com</a> (untested)</li>
-</ul>
-</body>
-</html>

contrib/README

@@ -0,0 +1,9 @@
+Most of the content that was previously in this directory has been
+moved to a separate git repository:
+
+    http://git.etherboot.org/?p=contrib.git;a=summary
+
+or the Etherboot Project wiki:
+
+    http://etherboot.org/
+

contrib/auto-default/mail

@@ -1,40 +0,0 @@
-Date:        11/9/2001 3:56 PM
-Received:    11/9/2001 4:05 PM
-From:        Steve Tilden, stilden@sicom-sys.com
-
-...
-
-2)  I have added conditional code to main.c from Etherboot 5.0.4 to add
-a new default boot option and I have included the modified main.c as an
-attachment to this message.
-
-As I received Etherboot 5.0.4, in the Config file, if you select
-ASK_BOOT with a non zero time-out option, then you also get to set
-ANS_DEFAULT = ANS_NETWORK or ANS_DEFAULT = ANS_LOCAL to determine what
-will happen if the operator does not respond to the prompt.   I have now
-added conditional code in main.c such that if you set ANS_DEFAULT =
-ANS_AUTO, the default answer will be set according to whether or not
-there is a hard disk in the system (as detected by the BIOS).  If a hard
-disk is present, then if the operator does nothing, the system will boot
-from it.  If a hard disk does not exist, then again if the operator does
-nothing, the system will boot via the network.  Either way, for our
-particular environment, the operator has to do nothing to get it to boot
-correctly.  Yet the operator can still override the default selection
-to, for example, allow a unit without a hard disk, to boot directly from
-a floppy rather than the network, or to allow a unit with a hard disk,
-to boot from the network.
-
-I don't know it the code I have added might be correct for a future
-production version of Etherboot, but I thought I'd send it to you and
-let you get it into the system if you feel it might be appropriate.
-
-Thanks,
-
-Steve Tilden
-Sicom Systems Inc.
-stilden@sicom-sys.com
-
-[Ed: On a compliant BIOS, it will actually boot the next device in the
-BIOS list if local is selected, either explicitly or by timeout, which
-may or may not be the hard disk, which is why it's less than general and
-not included in the distribution by default.]

contrib/auto-default/main.c.patch

@@ -1,55 +0,0 @@
---- main.c	Mon Nov  5 18:58:30 2001
-+++ main.c.new	Thu Nov 15 01:45:12 2001
-@@ -149,21 +151,49 @@
- static unsigned short ipchksum(unsigned short *ip, int len);
- static unsigned short udpchksum(struct iphdr *packet);
- 
-+
-+#if defined(ASK_BOOT) && ASK_BOOT > 0 && (ANS_DEFAULT == ANS_AUTO)
-+/*
-+ * Read Installed Hard Disk Count from BIOS memory at 0:0475
-+ */
-+static int hdsk_cnt(void)
-+{
-+	int retv;
-+	__asm__ __volatile__(
-+       "xorw %%ax,%%ax\n\t"
-+       "movb 0x475,%%al\n"
-+       : "=a" (retv)
-+       : /* no inputs */
-+       : "ax", "cc", "memory"
-+	);
-+	return(retv);
-+}
-+#endif /* ASK_BOOT && ANS_AUTO */
-+
-+
- static inline void ask_boot(void)
- {
- #if defined(ASK_BOOT) && ASK_BOOT > 0
- 	while(1) {
--		int c;
-+		int c, deflt;
- 		unsigned long time;
-+#if defined(ASK_BOOT) && ASK_BOOT > 0 && (ANS_DEFAULT == ANS_AUTO)
-+		if (hdsk_cnt() != 0)
-+			deflt = ANS_LOCAL;
-+		else
-+			deflt = ANS_NETWORK;
-+#else
-+		deflt = ANS_DEFAULT;
-+#endif
- 		printf(ASK_PROMPT);
- 		for (time = currticks() + ASK_BOOT*TICKS_PER_SEC; !iskey(); )
- 			if (currticks() > time) {
--				c = ANS_DEFAULT;
-+				c = deflt;
- 				goto done;
- 			}
- 		c = getchar();
- 		if ((c >= 'a') && (c <= 'z')) c &= 0x5F;
--		if (c == '\n') c = ANS_DEFAULT;
-+		if (c == '\n') c = deflt;
- done:
- 		if ((c >= ' ') && (c <= '~')) putchar(c);
- 		putchar('\n');

contrib/award_plugin_roms/README

@@ -1,2 +0,0 @@
-An Award BIOS ROM lister in Perl contributed by Eric W. Biederman
-<ebiederman@lnxi.com>.

contrib/award_plugin_roms/award_plugin_roms.pl

@@ -1,341 +0,0 @@
-#!/usr/bin/perl -w
-use strict;
-use FileHandle;
-use integer;
-
-sub unsigned_little_endian_to_value
-{
-	# Assumes the data is initially little endian
-	my ($buffer) = @_;
-	my $bytes = length($buffer);
-	my $value = 0;
-	my $i;
-	for($i = $bytes -1; $i >= 0; $i--) {
-		my $byte = unpack('C', substr($buffer, $i, 1));
-		$value = ($value * 256) + $byte;
-	}
-	return $value;
-}
-
-sub decode_fixed_string
-{
-	my ($data, $bytes) = @_;
-	return $data;
-}
-
-sub decode_pstring
-{
-	my ($buf_ref, $offset_ref) = @_;
-	# Decode a pascal string
-	my $offset = ${$offset_ref};
-	my $len = unpack('C',substr(${$buf_ref}, $offset, 1));
-	my $data = substr(${$buf_ref}, $offset +1,  $len);
-	${$offset_ref} = $offset + $len +1;
-	return $data;
-}
-
-sub decode_cstring
-{
-	# Decode a c string
-	my ($buf_ref, $offset_ref) = @_;
-	my ($data, $byte);
-	my $index = ${$offset_ref};
-	while(1) {
-		$byte = substr(${$buf_ref}, $index, 1);
-		if (!defined($byte) || ($byte eq "\0")) {
-			last;
-		}
-		$data .= $byte;
-		$index++;
-	}
-	${$offset_ref} = $index;
-	return $data;
-}
-
-sub type_size
-{
-	my ($entry) = @_;
-	my %type_length = (
-		byte => 1,
-		half => 2,
-		word => 4,
-		xword => 8,
-		'fixed-string' => $entry->[2],
-		pstring => 0,
-		cstring => 0,
-	);
-	my $type = $entry->[0];
-	if (!exists($type_length{$type})) {
-		 die "unknown type $type";
-	 }
-	my $length = $type_length{$type};
-	return $length;
-}
-
-sub decode_fixed_type
-{
-	my ($type, $data, $bytes) = @_;
-	my %decoders = (
-		'byte' => \&unsigned_little_endian_to_value,
-		'half' => \&unsigned_little_endian_to_value,
-		'word' => \&unsigned_little_endian_to_value,
-		'xword' => \&unsigned_little_endian_to_value,
-		'fixed-string' => \&decode_fixed_string,
-	);
-	my $decoder = $decoders{$type} or die "unknow fixed type $type";
-	return $decoder->($data, $bytes);
-}
-
-sub decode_variable_type
-{
-	my ($type, $buf_ref, $offset_ref) = @_;
-	my %decoders = (
-		'pstring' => \&decode_pstring,
-		'cstring' => \&decode_cstring,
-	);
-	my $decoder = $decoders{$type} or die "unknow variable type $type";
-	return $decoder->($buf_ref, $offset_ref);
-}
-
-sub decode_struct
-{
-	my ($buf_ref, $offset, $layout) = @_;
-	my $initial_offset = $offset;
-	my ($entry, %results);
-	foreach $entry (@$layout) {
-		my ($type, $name) = @$entry;
-		my $bytes = type_size($entry);
-		if ($bytes > 0) {
-			my $data = substr(${$buf_ref}, $offset, $bytes);
-			$results{$name} = decode_fixed_type($type, $data, $bytes);
-			$offset += $bytes;
-		} else {
-			$results{$name} = decode_variable_type($type, $buf_ref, \$offset);
-		}
-	}
-	return (\%results, $offset - $initial_offset);
-}
-
-sub print_big_hex
-{
-	my ($min_digits, $value) = @_;
-	my @digits;
-	while($min_digits > 0 || ($value > 0)) {
-		my $digit = $value%16;
-		$value /= 16;
-		unshift(@digits, $digit);
-		$min_digits--;
-	}
-	my $digit;
-	foreach $digit (@digits) {
-		printf("%01x", $digit);
-	}
-}
-
-
-
-my %lha_signatures = (
-	'-com-' => 1,	
-	'-lhd-'	=> 1,
-	'-lh0-'	=> 1,
-	'-lh1-'	=> 1,
-	'-lh2-'	=> 1,
-	'-lh3-'	=> 1,
-	'-lh4-'	=> 1,
-	'-lh5-'	=> 1,
-	'-lzs-' => 1,
-	'-lz4-' => 1,
-	'-lz5-' => 1,
-	'-afx-'	=> 1,
-	'-lzf-'	=> 1,
-);
-
-my %lha_os = (
-	'M' => 'MS-DOS',
-	'2' => 'OS/2',
-	'9' => 'OS9',
-	'K' => 'OS/68K',
-	'3' => 'OS/386',
-	'H' => 'HUMAN',
-	'U' => 'UNIX',
-	'C' => 'CP/M',
-	'F' => 'FLEX',
-	'm' => 'Mac',
-	'R' => 'Runser',
-	'T' => 'TownOS',
-	'X' => 'XOSK',
-	'A' => 'Amiga',
-	'a' => 'atari',
-	' ' => 'Award ROM',
-);
-
-
-my @lha_level_1_header = (
-	[ 'byte',         'header_size' ],    # 1
-	[ 'byte',         'header_sum', ],    # 2
-	[ 'fixed-string', 'method_id', 5 ],   # 7
-	[ 'word',         'skip_size', ],     # 11
-	[ 'word',         'original_size' ],  # 15
-	[ 'half',         'dos_time' ],       # 17
-	[ 'half',         'dos_date' ],       # 19
-    	[ 'byte',         'fixed'   ],        # 20
-	[ 'byte',         'level'   ],        # 21
-	[ 'pstring',      'filename' ],       # 22
-	[ 'half',         'crc' ],
-	[ 'fixed-string', 'os_id', 1 ],
-	[ 'half',         'ext_size' ],		  
-);
-
-# General lha_header
-my @lha_header = (
-	[ 'byte',         'header_size' ],
-	[ 'byte',         'header_sum', ],
-	[ 'fixed-string', 'method_id', 5 ],
-	[ 'word',         'skip_size', ],
-	[ 'word',         'original_size' ],
-	[ 'half',         'dos_time' ],
-	[ 'half',         'dos_date' ],
-	[ 'half',         'rom_addr' ],
-	[ 'half',         'rom_flags' ],
-    	[ 'byte',         'fixed'   ],
-	[ 'byte',         'level'   ],
-	[ 'pstring',      'filename' ],
-	[ 'half',         'crc' ],
-	[ 'lha_os',	  'os_id', 1 ],
-	[ 'half',         'ext_size' ],
-	[ 'byte',         'zero' ],
-	[ 'byte',         'total_checksum' ],
-	[ 'half',         'total_size' ],
-);
-
-sub print_struct
-{
-	my ($layout, $self) = @_;
-	my $entry;
-	my $width = 0;
-	foreach $entry(@$layout) {
-		my ($type, $name) = @$entry;
-		if (length($name) > $width) {
-			$width = length($name);
-		}
-	}
-	foreach $entry (@$layout) {
-		my ($type, $name) = @$entry;
-		printf("%*s = ", $width, $name);
-		my $value = $self->{$name};
-		if (!defined($value)) {
-			print "undefined";
-		}
-		elsif ($type eq "lha_os") {
-			print "$lha_os{$value}";
-		}
-		elsif ($type =~ m/string/) {
-			print "$value";
-		} 
-		else {
-			my $len = type_size($entry);
-			print "0x";
-			print_big_hex($len *2, $value);
-		}
-		print "\n";
-	}
-}
-
-sub checksum
-{
-	my ($buf_ref, $offset, $length) = @_;
-	my ($i, $sum);
-	$sum = 0;
-	for($i = 0; $i < $length; $i++) {
-		my $byte = unpack('C', substr($$buf_ref, $offset + $i, 1));
-		$sum = ($sum + $byte) %256;
-	}
-	return $sum;
-}
-
-sub decode_lha_header
-{
-	my ($buf_ref, $offset) = @_;
-	my $level = unpack('C',substr(${$buf_ref}, $offset + 20, 1));
-
-	my %self;
-	my ($struct, $bytes);
-	if ($level == 1) {
-		($struct, $bytes) 
-			= decode_struct($buf_ref, $offset, \@lha_level_1_header);
-		%self = %$struct;
-		if ($self{fixed} != 0x20) {
-			 die "bad fixed value";
-		}
-		$self{total_size} = $self{header_size} + 2 + $self{skip_size};
-		if ($bytes != $self{header_size} +2) {
-			die "$bytes != $self{header_size} +2";
-		}
-		my $checksum = checksum($buf_ref, $offset +2, $self{header_size});
-		if ($checksum != $self{header_sum}) {
-			printf("WARN: Header bytes checksum to %02lx\n", 
-				     $checksum);
-		}
-		# If we are an award rom...
-		if ($self{os_id} eq ' ') {
-			@self{qw(zero total_checksum)} = 
-			    unpack('CC', substr($$buf_ref, 
-				$offset + $self{total_size}, 2));
-			if ($self{zero} != 0) {
-				warn "Award ROM without trailing zero";
-			}
-			else {
-				$self{total_size}++;
-			}
-			my $checksum = 
-				checksum($buf_ref, $offset, $self{total_size});
-			if ($self{total_checksum} != $checksum) {
-				printf("WARN: Image bytes checksum to %02lx\n", 
-					$checksum);
-			}
-			else {
-				$self{total_size}++;
-			}
-			$self{rom_addr} = $self{dos_time};
-			$self{rom_flags} = $self{dos_date};
-			delete @self{qw(dos_time dos_date)};
-		}
-	}
-	else {
-		die "Unknown header type";
-	}
-	return \%self;
-}
-
-sub main
-{
-	my ($filename, $rom_length) = @_;
-	my $fd = new FileHandle;
-	if (!defined($rom_length)) {
-		my ($dev, $ino, $mode, $nlink, $uid, $gid,$rdev,$size,
-			$atime, $mtime, $ctime, $blksize, $blocks)
-			= stat($filename);
-		$rom_length = $size;
-	}
-	$fd->open("<$filename") or die "Cannot ope $filename";
-	my $data;
-	$fd->read($data, $rom_length);
-	$fd->close();
-	
-	my $i;
-	for($i = 0; $i < $rom_length; $i++) {
-		my $sig = substr($data, $i, 5);
-		if (exists($lha_signatures{$sig})) {
-			my $start = $i -2;
-			my $header = decode_lha_header(\$data, $start);
-			
-			my $length = $header->{total_size};
-			print "AT:  $start - @{[$start + $length -1]},  $length bytes\n";
-			print_struct(\@lha_header, $header);
-			print "\n";
-
-		}
-	}
-}
-
-main(@ARGV);

contrib/baremetal/Makefile

@@ -1,475 +0,0 @@
-#
-# Makefile for Etherboot
-#
-# Most of the time you should edit Config
-#
-# Common options:
-#	VERSION=v	- Set the version string
-#
-# NS8390 options:
-#	-DINCLUDE_NE	- Include NE1000/NE2000 support
-#	-DNE_SCAN=list	- Probe for NE base address using list of
-#			  comma separated hex addresses
-#	-DINCLUDE_3C503 - Include 3c503 support
-#	  -DT503_SHMEM	- Use 3c503 shared memory mode (off by default)
-#	-DINCLUDE_WD	- Include Western Digital/SMC support
-#	-DWD_DEFAULT_MEM- Default memory location for WD/SMC cards
-#	-DCOMPEX_RL2000_FIX
-#
-#	If you have a Compex RL2000 PCI 32-bit (11F6:1401),
-#	and the bootrom hangs in "Probing...[NE*000/PCI]",
-#	try enabling this fix... it worked for me :).
-#	In the first packet write somehow it somehow doesn't
-#	get back the expected data so it is stuck in a loop.
-#	I didn't bother to investigate what or why because it works
-#	when I interrupt the loop if it takes more then COMPEX_RL2000_TRIES.
-#	The code will notify if it does a abort.
-#	SomniOne - somnione@gmx.net
-#
-# 3C509 option:
-#	-DINCLUDE_3C509	- Include 3c509 support
-#
-# 3C90X options:
-#	-DINCLUDE_3C90X	- Include 3c90x support
-#	-DCFG_3C90X_PRESERVE_XCVR - Reset the transceiver type to the value it
-#			  had initially just before the loaded code is started.
-#	-DCFG_3C90X_XCVR - Hardcode the tranceiver type Etherboot uses.
-#	-DCFG_3C90X_BOOTROM_FIX - If you have a 3c905B with buggy ROM
-#			  interface, setting this option might "fix" it.  Use
-#			  with caution and read the docs in 3c90x.txt!
-#
-#	See the documentation file 3c90x.txt for more details.
-#
-# CS89X0 (optional) options:
-#	-DINCLUDE_CS89X0- Include CS89x0 support
-#	-DCS_SCAN=list	- Probe for CS89x0 base address using list of
-#			  comma separated hex addresses; increasing the
-#			  address by one (0x300 -> 0x301) will force a
-#			  more aggressive probing algorithm. This might
-#			  be neccessary after a soft-reset of the NIC.
-#
-# LANCE options:
-#	-DINCLUDE_NE2100- Include NE2100 support
-#	-DINCLUDE_NI6510- Include NI6510 support
-#
-# SK_G16 options:
-#	-DINCLUDE_SK_G16- Include SK_G16 support
-#
-# I82586 options:
-#	-DINCLUDE_3C507	- Include 3c507 support
-#	-DINCLUDE_NI5210- Include NI5210 support
-#	-DINCLUDE_EXOS205-Include EXOS205 support
-#
-# SMC9000 options:
-#       -DINCLUDE_SMC9000   - Include SMC9000 driver
-#       -DSMC9000_SCAN=list - List of I/O addresses to probe
-#
-# TIARA (Fujitsu Etherstar) options:
-#	-DINCLUDE_TIARA	- Include Tiara support
-#
-# NI5010 options:
-#	-DINCLUDE_NI5010 - Include NI5010 support
-#
-# TULIP options:
-#	-DINCLUDE_TULIP	- Include Tulip support
-#	-DUSE_INTERNAL_BUFFER - receuve and transmit buffers within program
-#		space, not below 0x10000, in case that region is used
-#
-# RTL8139 options:
-#	-DINCLUDE_RTL8139 - Include RTL8139 support
-#	-DUSE_INTERNAL_BUFFER - 8 kB receive buffer within program space,
-#		not at 0x10000 - 8kB, in case that region is used
-#
-
-include Config
-
-GCC=		gcc
-CPP=		gcc -E
-VERSION=	4.6.12
-CFLAGS16+=	-DVERSION=\"$(VERSION)\" -DRELOC=$(RELOCADDR)
-CFLAGS32+=	-DVERSION=\"$(VERSION)\" -DRELOC=$(RELOCADDR) $(OLDGAS)
-LCONFIG+=	-DRELOC=$(RELOCADDR)
-
-IDENT16=		'Etherboot/16 $(VERSION) (GPL) $(@F)'
-IDENT32=		'Etherboot/32 $(VERSION) (GPL) $(@F)'
-
-# Find out if we're using binutils 2.9.1 which uses a different syntax in some
-# places (most prominently in the opcode prefix area).
-OLDGAS:=	$(shell $(AS) --version | grep -q '2\.9\.1' && echo -DGAS291)
-
-# Check the requested type of build (32, 16 or both families)
-ifeq ($(ETHERBOOT),16)
-BUILD_LIBS=	$(BLIB16)
-BUILD_BINS=	$(BINS16)
-endif
-ifeq ($(ETHERBOOT),32)
-BUILD_LIBS=	$(BLIB32)
-BUILD_BINS=	$(BINS32)
-endif
-ifeq ($(ETHERBOOT),both)
-BUILD_LIBS=	$(BLIB16) $(BLIB32)
-BUILD_BINS=	$(BINS16) $(BINS32)
-endif
-
-3C503FLAGS=	-DINCLUDE_3C503 # -DT503_SHMEM
-# Note that the suffix to MAKEROM_ is the (mixed case) basename of the ROM file
-MAKEROM_3c503=	-3
-3C507FLAGS=	-DINCLUDE_3C507
-3C509FLAGS=	-DINCLUDE_3C509
-3C529FLAGS=	-DINCLUDE_3C529
-3C595FLAGS=	-DINCLUDE_3C595
-3C90XFLAGS=	-DINCLUDE_3C90X
-CS89X0FLAGS=	-DINCLUDE_CS89X0
-EEPROFLAGS=	-DINCLUDE_EEPRO
-EEPRO100FLAGS=	-DINCLUDE_EEPRO100
-EPIC100FLAGS=	-DINCLUDE_EPIC100
-EXOS205FLAGS=	-DINCLUDE_EXOS205
-LANCEFLAGS=	-DINCLUDE_LANCE		# Lance/PCI!
-NE2100FLAGS=	-DINCLUDE_NE2100
-NEFLAGS=	-DINCLUDE_NE -DNE_SCAN=0x300,0x280,0x320,0x340,0x380
-NS8390FLAGS=	-DINCLUDE_NS8390	# NE2000/PCI!
-NI5010FLAGS=	-DINCLUDE_NI5010
-NI5210FLAGS=	-DINCLUDE_NI5210
-NI6510FLAGS=	-DINCLUDE_NI6510
-RTL8139FLAGS=	-DINCLUDE_RTL8139
-SK_G16FLAGS=	-DINCLUDE_SK_G16
-SMC9000FLAGS=   -DINCLUDE_SMC9000
-TIARAFLAGS=	-DINCLUDE_TIARA
-DEPCAFLAGS=	-DINCLUDE_DEPCA	# -DDEPCA_MODEL=DEPCA -DDEPCA_RAM_BASE=0xd0000
-TULIPFLAGS=	-DINCLUDE_TULIP
-OTULIPFLAGS=	-DINCLUDE_OTULIP
-VIA_RHINEFLAGS=	-DINCLUDE_VIA_RHINE
-WDFLAGS=	-DINCLUDE_WD -DWD_DEFAULT_MEM=0xCC000
-W89C840FLAGS=	-DINCLUDE_W89C840
-
-# If you have not made any changes to the *.S files, AS86 need not be set.
-# (most people)
-# If you have made changes to the *.S files and you want to rebuild *loader.bin
-# and {floppy,com}load.bin and you have as86 from the ELKS Dev86 package (not
-# the one that normally comes with Linux) (not most people)
-#AS86=		as86
-# If you have made changes to the *.S files and you want to rebuild *loader.bin
-# and {floppy,com}load.bin and you have nasm (not most people)
-#AS86=		nasm
-
-# if your as has trouble with the data32 directive, uncomment this
-# but note that the premade start*.o will be larger than necessary because it
-# contains some routines which may not be used
-#AS_PSEUDOS=	n
-
-SRCS=	floppyload.S comload.S liloprefix.S loader.S start16.S start32.S serial.S startmpcc.S
-SRCS+=	main.c pci.c osloader.c nfs.c misc.c ansiesc.c bootmenu.c config.c
-SRCS+=	md5.c floppy.c
-
-# ROM loaders: LZ version (prefix Z), PCI header version (prefix P)
-ifndef AS86
-RLOADER=	rloader.bin.pre
-PRLOADER=	prloader.bin.pre
-RZLOADER=	rzloader.bin.pre
-PRZLOADER=	przloader.bin.pre
-FLOPPYLOAD=	floppyload.bin.pre
-COMLOAD=	comload.bin.pre
-LILOPREFIX=	liloprefix.bin.pre
-else
-RLOADER=	bin/rloader.bin
-PRLOADER=	bin/prloader.bin
-RZLOADER=	bin/rzloader.bin
-PRZLOADER=	bin/przloader.bin
-FLOPPYLOAD=	bin/floppyload.bin
-COMLOAD=	bin/comload.bin
-LILOPREFIX=	bin/liloprefix.bin
-endif
-
-ifeq ($(AS86),as86)
-LCPPFLAGS+=	-DUSE_AS86
-LASFLAGS+=	$(AS86FLAGS) -0
-LASBINARY:=	-b
-endif
-ifeq ($(AS86),nasm)
-LCPPFLAGS+=	-DUSE_NASM
-LASFLAGS+=	$(NASMFLAGS) -fbin
-LASBINARY:=	-o
-endif
-
-ifeq ($(AS_PSEUDOS),n)
-START16=	start16.o.pre
-START32=	start32.o.pre
-else
-START16=	bin16/start16.o
-START32=	bin32/startmpcc.o
-endif
-
-BOBJS16=	bin16/main.o bin16/osloader.o bin16/misc.o bin16/bootmenu.o
-BOBJS16+=	bin16/floppy.o bin16/timer.o
-BOBJS32=	bin32/main.o bin32/osloader.o bin32/nfs.o bin32/misc.o
-BOBJS32+=	bin32/ansiesc.o bin32/bootmenu.o bin32/md5.o bin32/floppy.o
-BOBJS32+=	bin32/serial.o bin32/timer.o
-BLIB16=	bin16/bootlib.a
-BLIB32=	bin32/bootlib.a
-LIBS16=	$(BLIB16) $(LIBC16)
-LIBS32=	$(BLIB32) $(LIBC32) /usr/lib/gcc-lib/i386-redhat-linux/2.96/libgcc.a
-UTIL_LZHUF:= $(shell if [ -d ../contrib/compressor ]; then echo bin/lzhuf; fi)
-UTILS+=	bin/makerom $(UTIL_LZHUF) bin/organon
-STDDEPS16=	$(START16) $(BLIB16) $(UTILS)
-STDDEPS32=	$(START32) $(BLIB32) $(UTILS)
-MAKEDEPS=	Makefile Config Roms
-
-CHECKSIZE=	{ read d1; read d1 d2 d3 size d4; [ $$size -gt $(ROMLIMIT) ] &&\
-	{ $(RM) $@; echo "ERROR: code size exceeds limit!"; exit 1; }; exit 0; }
-
-# Make sure that the relocation address is acceptable for all ROM sizes.
-# Setting it to 0x98000 leaves about 29kB of space for the Etherboot program.
-# The check is done based running 'size' on the binary, not ROM size, but
-# roughly this means a ROM of 16kB or a partially used ROM of 32kB,
-# remembering to compressed ROM images into account.
-# You may also set RELOCADDR to 0x88000 to avoid using 0x98000
-# because of other drivers (e.g. Disk On Chip). In that case, you may
-# only load 512kB of OS, or load in memory above 1MB.
-# Don't forget to choose an assembler because the loaders have to be rebuilt.
-ifndef RELOCADDR
-RELOCADDR=0x98000
-#RELOCADDR=0xe0000
-endif
-
-# Evaluate ROMLIMIT only once - it is constant during the make run.
-# Note that the 3K safety margin below is for the 1K extended BIOS data area
-# and for the Etherboot runtime stack.  Under normal situations, 2K of stack
-# are rarely needed.  If you experience strange behaviour in functions that use
-# many local variables or that call functions that do, check for stack overrun!
-# Make sure that the normal case needs no perl interpreter - if someone uses a
-# different RELOCADDR, then he has perl installed anyways (the shell cannot
-# deal with hex numbers, as test/eval don't support non-decimal integers).
-ifeq ($(RELOCADDR),0x98000)
-ROMLIMIT=29696
-else
-ROMLIMIT:=$(shell perl -e 'print 0x10000 - 3072 - ($(RELOCADDR) & 0xFFFF), "\n";')
-endif
-
-# Start of targets
-
-all:	$(UTILS) $(BUILD_LIBS) allbins
-
-include Roms
-
-# We need allbins because $(BINS16) and $(BINS32) are not defined until
-# the Makefile fragment "Roms" is read.
-
-allbins:	$(BUILD_BINS)
-
-# Common files
-
-$(BLIB16):	$(BOBJS16)
-	$(AR16) rv $@ $(BOBJS16)
-	$(RANLIB16) $@
-
-$(BLIB32):	$(BOBJS32)
-	$(AR32) rv $@ $(BOBJS32)
-	$(RANLIB32) $@
-
-bin16/main.o:		main.c etherboot.h osdep.h nic.h
-bin32/main.o:		main.c etherboot.h osdep.h nic.h
-
-bin16/osloader.o:	osloader.c etherboot.h osdep.h
-bin32/osloader.o:	osloader.c etherboot.h osdep.h
-
-# NFS currently makes no sense for Etherboot/16
-bin32/nfs.o:		nfs.c etherboot.h osdep.h nic.h
-
-bin16/misc.o:		misc.c etherboot.h osdep.h
-bin32/misc.o:		misc.c etherboot.h osdep.h
-
-# ANSIESC is not supported for Etherboot/16
-bin32/ansiesc.o:	ansiesc.c etherboot.h osdep.h
-
-bin16/bootmenu.o:	bootmenu.c etherboot.h osdep.h
-bin32/bootmenu.o:	bootmenu.c etherboot.h osdep.h
-
-# Password support is not available for Etherboot/16
-bin32/md5.o:		md5.c etherboot.h osdep.h
-
-bin16/floppy.o:		floppy.c etherboot.h osdep.h
-bin32/floppy.o:		floppy.c etherboot.h osdep.h
-
-bin16/timer.o:		timer.c timer.h etherboot.h osdep.h
-bin32/timer.o:		timer.c timer.h etherboot.h osdep.h
-
-bin32/inthw.o:		inthw.c
-
-# PCI support code (common to all PCI drivers)
-
-bin32/pci.o:	pci.c pci.h
-
-# Do not add driver specific dependencies here unless it's something the
-# genrules.pl script *can't* deal with, i.e. if it is not C code.
-
-# Prepended loaders
-
-#ifndef AS86
-#$(RLOADER) $(RZLOADER) $(PRLOADER) $(PRZLOADER):	$(MAKEDEPS)
-#	@if [ $(RELOCADDR) != 0x98000 ]; then echo Non-standard RELOCADDR, must assemble $@; exit 1; fi
-#	$(TOUCH) $@
-#else
-#bin/rloader.s:	loader.S $(MAKEDEPS)
-#	$(CPP) $(LCPPFLAGS) $(LCONFIG) -o $@ $<
-#
-#bin/rzloader.s:	loader.S $(MAKEDEPS)
-#	$(CPP) $(LCPPFLAGS) $(LCONFIG) -DZLOADER -o $@ $<
-#
-#bin/prloader.s:	loader.S $(MAKEDEPS)
-#	$(CPP) $(LCPPFLAGS) $(LCONFIG) -DPCI_PNP_HEADER -o $@ $<
-#
-#bin/przloader.s:	loader.S $(MAKEDEPS)
-#	$(CPP) $(LCPPFLAGS) $(LCONFIG) -DPCI_PNP_HEADER -DZLOADER -o $@ $<
-#endif
-
-# Floppy loader
-
-ifdef AS86
-bin/floppyload.s:	floppyload.S $(MAKEDEPS)
-	$(CPP) $(LCPPFLAGS) -o $@ $<
-endif
-
-# COM loader
-
-ifdef AS86
-bin/comload.s:	comload.S $(MAKEDEPS)
-	$(CPP) $(LCPPFLAGS) -o $@ $<
-endif
-
-# LILO prefix:
-
-ifdef AS86
-bin/liloprefix.s:	liloprefix.S $(MAKEDEPS)
-	$(CPP) $(LCPPFLAGS) -o $@ $<
-endif
-
-# Utilities
-
-bin/makerom: makerom.c
-	$(GCC) -O2 -o $@ makerom.c
-
-bin/organon: organon.c
-	$(GCC) -o $@ organon.c
-
-bin/lzhuf:	../contrib/compressor/lzhuf.c
-	$(GCC) -O2 -DENCODE -DDECODE -DMAIN -DVERBOSE -o $@ $<
-
-# Roms file
-
-Roms:	NIC genrules.pl
-	@chmod +x genrules.pl
-	./genrules.pl NIC > $@
-
-# Pattern Rules
-
-# general rules for compiling/assembling source files
-bin16/%.o:	%.c $(MAKEDEPS)
-	$(CC16) $(CFLAGS16) -o $@ -c $<
-
-bin32/%.o:	%.c $(MAKEDEPS)
-	$(CC32) $(CFLAGS32) -o $@ -c $<
-
-bin16/%.o:	%.S $(MAKEDEPS)
-	$(CC16) $(CFLAGS16) $(ASFLAGS16) -c -o $@ $<
-
-bin32/%.o:	%.S $(MAKEDEPS)
-	$(CPP) $(CFLAGS32) $< | $(AS) $(ASFLAGS32) -o $@
-
-# general rule for .bin (plain binary loader code), may be overridden
-ifdef AS86
-bin/%.bin:	bin/%.s
-	$(AS86) $(LASFLAGS) $(LASBINARY) $@ $<
-endif
-
-# general rule for .huf (compressed binary code), may be overridden
-%.huf:	%.img
-	bin/lzhuf e $< $@
-
-# general rules for normal/compressed ROM images, may be overridden
-bin16/%.rom:	bin16/%.img $(RLOADER)
-	cat $(RLOADER) $< > $@
-	bin/makerom $(MAKEROM_$*) -i$(IDENT16) $@
-
-bin32/%.rom:	bin32/%.img $(RLOADER)
-	cat $(RLOADER) $< > $@
-	bin/makerom $(MAKEROM_$*) -i$(IDENT32) $@
-
-bin16/%.lzrom:	bin16/%.huf $(RZLOADER)
-	cat $(RZLOADER) $< > $@
-	bin/makerom $(MAKEROM_$*) -i$(IDENT16) $@
-
-bin32/%.lzrom:	bin32/%.huf $(RZLOADER)
-	cat $(RZLOADER) $< > $@
-	bin/makerom $(MAKEROM_$*) -i$(IDENT32) $@
-
-# rules to write the .rom/.lzrom image onto a blank floppy
-# You must give the directory name, e.g. use bin32/rtl8139.lzfd0 as the target.
-%.fd0:	%.rom $(FLOPPYLOAD)
-	cat $(FLOPPYLOAD) $< > /dev/fd0
-
-%.lzfd0:	%.lzrom $(FLOPPYLOAD)
-	cat $(FLOPPYLOAD) $< > /dev/fd0
-
-# rules to generate a .com executable
-# You must give the directory name, e.g. use bin32/rtl8139.com as the target.
-%.com:	%.lzrom $(COMLOAD)
-	cat $(COMLOAD) $< > $@
-
-# rules to make a floppy image (padding to fill an even number of cylinders).
-# VMware reports floppy image read errors if it cannot read ahead 36 sectors,
-# probably because the floppyload.S code reads up to that number of sectors in
-# a single request.  Not that 18k matters much these days...
-# You must give the directory name, e.g. use bin32/rtl8139.fdimg as the target.
-%.fdimg:	%.rom $(FLOPPYLOAD)
-	cat $(FLOPPYLOAD) $< > $@.x
-	dd if=$@.x of=$@ bs=36k conv=sync 2> /dev/null
-	$(RM) $@.x
-
-%.lzfdimg:	%.lzrom $(FLOPPYLOAD)
-	cat $(FLOPPYLOAD) $< > $@.x
-	dd if=$@.x of=$@ bs=36k conv=sync 2> /dev/null
-	$(RM) $@.x
-
-# rules to make a LILO-bootable image
-%.lilo:		%.rom $(LILOPREFIX)
-	cat $(LILOPREFIX) $< /dev/zero | head -c 64k > $@
-
-%.lzlilo:	%.lzrom $(LILOPREFIX)
-	cat $(LILOPREFIX) $< /dev/zero | head -c 64k > $@
-
-# Housekeeping
-
-# To make sure that this actually builds a start32.o.pre with all options set,
-# you have to make sure that -DFLOPPY -DANSIESC -DCONSOLE_DUAL are in CFLAGS32.
-precompiled:	bin/rloader.bin bin/rzloader.bin bin/prloader.bin bin/przloader.bin bin/floppyload.bin bin/comload.bin bin16/start16.o bin32/start32.o bin/liloprefix.bin
-	cp -p bin/rloader.bin rloader.bin.pre
-	cp -p bin/rzloader.bin rzloader.bin.pre
-	cp -p bin/prloader.bin prloader.bin.pre
-	cp -p bin/przloader.bin przloader.bin.pre
-	cp -p bin/floppyload.bin floppyload.bin.pre
-	cp -p bin/comload.bin comload.bin.pre
-	cp -p bin16/start16.o start16.o.pre
-	cp -p bin32/start32.o start32.o.pre
-	cp -p bin/liloprefix.bin liloprefix.bin.pre
-
-clean:
-	$(RM) $(UTILS) bin/*.s bin/*.bin
-	$(RM) $(BLIB16) $(BLIB32)
-	$(RM) bin16/*.o bin32/*.o bin16/*.tmp bin32/*.tmp
-	$(RM) bin16/*.img bin32/*.img bin16/*.huf bin32/*.huf
-	$(RM) bin16/*.rom bin32/*.rom bin16/*.lzrom bin32/*.lzrom
-	$(RM) bin16/*.com bin32/*.com
-	$(RM) bin16/*.fdimg bin32/*.fdimg bin16/*.lzfdimg bin32/*.lzfdimg
-	$(RM) bin16/*.lilo bin32/*.lilo bin16/*.lzlilo bin32/*.lzlilo
-	$(RM) bin32/*.hex
-	$(RM) bin32/*.asm
-	$(RM) bin32/*.map
-
-tarball:
-	(echo -n $(VERSION) ''; date -u +'%Y-%m-%d') > ../VERSION
-	(cd ..; tar cf /tmp/mpccboot-$(VERSION).tar --exclude CVS mpccboot)
-	bzip2 -9 < /tmp/mpccboot-$(VERSION).tar > /tmp/mpccboot-$(VERSION).tar.bz2
-	gzip -9 < /tmp/mpccboot-$(VERSION).tar > /tmp/mpccboot-$(VERSION).tar.gz
-
-version:
-	@echo $(VERSION)

contrib/baremetal/marini.txt

@@ -1,52 +0,0 @@
-From: "Paolo Marini" <paolom@prisma-eng.it>
-Subject: Etherboot on bare metal
-Date: Tue, 10 Apr 2001 23:19:19 +0200
-Organization: Prisma Engineering srl
-
-Hi Ken,
-I have ported Etherboot on an embedded, biosless platform and would like
-to contribute the code.
-
-Essentially, the hardware I was running Etherboot is a Pentium based
-embedded system, with an Intel Chipset, *but* without serial, VGA,
-keyboard etc., only an 82559 Intel (custom) Ethernet controller (I debug
-it with the etheral Ethernet packet analyser and an emulator).
-
-What I did was:
-
-  a.. integrate the init.s file within the firmware, with GDT
-(re)initialisation (a simple and single entry point taking control of
-the boot process)
-  b.. provide some stupid BIOS stubs in order to let the OS boot and
-still belive that an INT10 call goes to the BIOS
-  c.. provide some basic functions to Etherboot, like timer (I used the
-Pentium TSC internal counter)
-  d.. hardwire in the code information about the RAM size
-The BIOS stubs are enough to boot Linux, pSOS and QNX with bootp. QNX is
-somewhat difficult to load, because the i82559 driver tries to find the
-component using the BIOS32 calls, so I had to patch it.
-
-what i I got from the original firmware is the PCI initialisation and
-resource (I/O, interrupts, memory) allocation.
-
-I send you what I changed, that is, the initialisation code and the
-misc.c file containing the timer, and the makefile (I don't remember
-exactly the options I used to compile all).
-
-Of course, it is only a good starting point for anyone wanting to
-implement a bootp client on a biosless platform; some integration work
-still needs to be done.
-
-Ciao
-Paolo
-
-And in a subsequent email:
-
-I worked with version 4.6.12, but the real modifications involve the
-init.S file, which I think is quite sstable between releases.  I forgot
-to say that my entry point (symbol _start in init.s) assumes the
-processor is already in protected mode.
-
-[The only difference between main.c and misc.c from those in Etherboot
-4.6.12 seems to be the deletion of eth_reset(). This may be of use to
-others trying to make these changes work on more recent releases. Ken]

contrib/baremetal/misc.c

@@ -1,351 +0,0 @@
-/**************************************************************************
-MISC Support Routines
-**************************************************************************/
-
-#include "etherboot.h"
-
-/**************************************************************************
-SLEEP
-**************************************************************************/
-void sleep(int secs)
-{
-	unsigned long tmo;
-
-	for (tmo = currticks()+secs*TICKS_PER_SEC; currticks() < tmo; )
-		/* Nothing */;
-}
-
-/**************************************************************************
-TWIDDLE
-**************************************************************************/
-void twiddle()
-{
-	static unsigned long lastticks = 0;
-	static int count=0;
-	static const char tiddles[]="-\\|/";
-	unsigned long ticks;
-	if ((ticks = currticks()) == lastticks)
-		return;
-	lastticks = ticks;
-	putchar(tiddles[(count++)&3]);
-	putchar('\b');
-}
-
-/**************************************************************************
-STRCASECMP (not entirely correct, but this will do for our purposes)
-**************************************************************************/
-int strcasecmp(a,b)
-	char *a, *b;
-{
-	while (*a && *b && (*a & ~0x20) == (*b & ~0x20)) {a++; b++; }
-	return((*a & ~0x20) - (*b & ~0x20));
-}
-
-/**************************************************************************
-PRINTF and friends
-
-	Formats:
-		%[#]X	- 4 bytes long (8 hex digits)
-		%[#]x	- 2 bytes int (4 hex digits)
-			- optional # prefixes 0x
-		%b	- 1 byte int (2 hex digits)
-		%d	- decimal int
-		%c	- char
-		%s	- string
-		%I	- Internet address in x.x.x.x notation
-	Note: width specification not supported
-**************************************************************************/
-static char *do_printf(char *buf, const char *fmt, const int *dp)
-{
-	register char *p;
-	int alt;
-	char tmp[16];
-	static const char hex[]="0123456789ABCDEF";
-
-	while (*fmt) {
-		if (*fmt == '%') {	/* switch() uses more space */
-			alt = 0;
-			fmt++;
-			if (*fmt == '#') {
-				alt = 1;
-				fmt++;
-			}
-			if (*fmt == 'X') {
-				const long *lp = (const long *)dp;
-				register long h = *lp++;
-				dp = (const int *)lp;
-				if (alt) {
-					*buf++ = '0';
-					*buf++ = 'x';
-				}
-				*(buf++) = hex[(h>>28)& 0x0F];
-				*(buf++) = hex[(h>>24)& 0x0F];
-				*(buf++) = hex[(h>>20)& 0x0F];
-				*(buf++) = hex[(h>>16)& 0x0F];
-				*(buf++) = hex[(h>>12)& 0x0F];
-				*(buf++) = hex[(h>>8)& 0x0F];
-				*(buf++) = hex[(h>>4)& 0x0F];
-				*(buf++) = hex[h& 0x0F];
-			}
-			if (*fmt == 'x') {
-				register int h = *(dp++);
-				if (alt) {
-					*buf++ = '0';
-					*buf++ = 'x';
-				}
-				*(buf++) = hex[(h>>12)& 0x0F];
-				*(buf++) = hex[(h>>8)& 0x0F];
-				*(buf++) = hex[(h>>4)& 0x0F];
-				*(buf++) = hex[h& 0x0F];
-			}
-			if (*fmt == 'b') {
-				register int h = *(dp++);
-				*(buf++) = hex[(h>>4)& 0x0F];
-				*(buf++) = hex[h& 0x0F];
-			}
-			if (*fmt == 'd') {
-				register int dec = *(dp++);
-				p = tmp;
-				if (dec < 0) {
-					*(buf++) = '-';
-					dec = -dec;
-				}
-				do {
-					*(p++) = '0' + (dec%10);
-					dec = dec/10;
-				} while(dec);
-				while ((--p) >= tmp) *(buf++) = *p;
-			}
-			if (*fmt == 'I') {
-				union {
-					long		l;
-					unsigned char	c[4];
-				} u;
-				const long *lp = (const long *)dp;
-				u.l = *lp++;
-				dp = (const int *)lp;
-				buf = sprintf(buf,"%d.%d.%d.%d",
-					u.c[0], u.c[1], u.c[2], u.c[3]);
-			}
-			if (*fmt == 'c')
-				*(buf++) = *(dp++);
-			if (*fmt == 's') {
-				p = (char *)*dp++;
-				while (*p) *(buf++) = *p++;
-			}
-		} else *(buf++) = *fmt;
-		fmt++;
-	}
-	*buf = '\0';
-	return(buf);
-}
-
-char *sprintf(char *buf, const char *fmt, ...)
-{
-	return do_printf(buf, fmt, ((const int *)&fmt)+1);
-}
-
-void printf(const char *fmt, ...)
-{
-	char buf[120], *p;
-
-	p = buf;
-	do_printf(buf, fmt, ((const int *)&fmt)+1);
-	while (*p) putchar(*p++);
-}
-
-#ifdef	IMAGE_MENU
-/**************************************************************************
-INET_ATON - Convert an ascii x.x.x.x to binary form
-**************************************************************************/
-int inet_aton(char *p, in_addr *i)
-{
-	unsigned long ip = 0;
-	int val;
-	if (((val = getdec(&p)) < 0) || (val > 255)) return(0);
-	if (*p != '.') return(0);
-	p++;
-	ip = val;
-	if (((val = getdec(&p)) < 0) || (val > 255)) return(0);
-	if (*p != '.') return(0);
-	p++;
-	ip = (ip << 8) | val;
-	if (((val = getdec(&p)) < 0) || (val > 255)) return(0);
-	if (*p != '.') return(0);
-	p++;
-	ip = (ip << 8) | val;
-	if (((val = getdec(&p)) < 0) || (val > 255)) return(0);
-	i->s_addr = htonl((ip << 8) | val);
-	return(1);
-}
-
-#endif	/* IMAGE_MENU */
-
-int getdec(char **ptr)
-{
-	char *p = *ptr;
-	int ret=0;
-	if ((*p < '0') || (*p > '9')) return(-1);
-	while ((*p >= '0') && (*p <= '9')) {
-		ret = ret*10 + (*p - '0');
-		p++;
-	}
-	*ptr = p;
-	return(ret);
-}
-
-#define K_RDWR		0x60		/* keyboard data & cmds (read/write) */
-#define K_STATUS	0x64		/* keyboard status */
-#define K_CMD		0x64		/* keybd ctlr command (write-only) */
-
-#define K_OBUF_FUL	0x01		/* output buffer full */
-#define K_IBUF_FUL	0x02		/* input buffer full */
-
-#define KC_CMD_WIN	0xd0		/* read  output port */
-#define KC_CMD_WOUT	0xd1		/* write output port */
-#define KB_SET_A20	0xdf		/* enable A20,
-					   enable output buffer full interrupt
-					   enable data line
-					   disable clock line */
-#define KB_UNSET_A20	0xdd		/* enable A20,
-					   enable output buffer full interrupt
-					   enable data line
-					   disable clock line */
-#ifndef	IBM_L40
-static void empty_8042(void)
-{
-	unsigned long time;
-	char st;
-
-	time = currticks() + TICKS_PER_SEC;	/* max wait of 1 second */
-	while ((((st = inb(K_CMD)) & K_OBUF_FUL) ||
-	       (st & K_IBUF_FUL)) &&
-	       currticks() < time)
-		inb(K_RDWR);
-}
-#endif	IBM_L40
-
-/*
- * Gate A20 for high memory
- */
-void gateA20_set(void)
-{
-#ifdef	IBM_L40
-	outb(0x2, 0x92);
-#else	/* IBM_L40 */
-	empty_8042();
-	outb(KC_CMD_WOUT, K_CMD);
-	empty_8042();
-	outb(KB_SET_A20, K_RDWR);
-	empty_8042();
-#endif	/* IBM_L40 */
-}
-
-#ifdef	TAGGED_IMAGE
-/*
- * Unset Gate A20 for high memory - some operating systems (mainly old 16 bit
- * ones) don't expect it to be set by the boot loader.
- */
-void gateA20_unset(void)
-{
-#ifdef	IBM_L40
-	outb(0x0, 0x92);
-#else	/* IBM_L40 */
-	empty_8042();
-	outb(KC_CMD_WOUT, K_CMD);
-	empty_8042();
-	outb(KB_UNSET_A20, K_RDWR);
-	empty_8042();
-#endif	/* IBM_L40 */
-}
-#endif
-
-#ifdef	ETHERBOOT32
-/* Serial console is only implemented in ETHERBOOT32 for now */
-void
-putchar(int c)
-{
-#ifndef	ANSIESC
-	if (c == '\n')
-		putchar('\r');
-#endif
-
-#ifdef	CONSOLE_CRT
-#ifdef	ANSIESC
-	handleansi(c);
-#else
-	putc(c);
-#endif
-#endif
-#ifdef	CONSOLE_SERIAL
-#ifdef	ANSIESC
-	if (c == '\n')
-		serial_putc('\r');
-#endif
-	serial_putc(c);
-#endif
-}
-
-/**************************************************************************
-GETCHAR - Read the next character from the console WITHOUT ECHO
-**************************************************************************/
-int
-getchar(void)
-{
-	int c = 256;
-
-#if defined CONSOLE_CRT || defined CONSOLE_SERIAL
-	do {
-#ifdef	CONSOLE_CRT
-		if (ischar())
-			c = getc();
-#endif
-#ifdef	CONSOLE_SERIAL
-		if (serial_ischar())
-			c = serial_getc();
-#endif
-	} while (c==256);
-	if (c == '\r')
-		c = '\n';
-#endif		
-	return c;
-}
-
-int
-iskey(void)
-{
-#ifdef	CONSOLE_CRT
-	if (ischar())
-		return 1;
-#endif
-#ifdef	CONSOLE_SERIAL
-	if (serial_ischar())
-		return 1;
-#endif
-	return 0;
-}
-#endif	/* ETHERBOOT32 */
-
-/*
- * Local variables:
- *  c-basic-offset: 8
- * End:
- */
- 
-#include <asm/msr.h>
-
-#define CPUCLOCK 166
-
-unsigned long currticks(void)
-{
-    register unsigned long l, h;
-    long long unsigned p;
-    long long unsigned hh,ll;
-    
-    rdtsc(l, h);
-    ll = l, hh = h;
-
-    p = (ll + hh * 0x100000000LL) * 182 / (CPUCLOCK * 100000LL);
-    return (unsigned)p;
-}
-

contrib/baremetal/startmpcc.S

@@ -1,756 +0,0 @@
-/* #defines because ljmp wants a number, probably gas bug */
-/*	.equ	KERN_CODE_SEG,_pmcs-_gdt	*/
-#define	KERN_CODE_SEG	0x08
-	.equ	KERN_DATA_SEG,_pmds-_gdt
-/*	.equ	REAL_CODE_SEG,_rmcs-_gdt	*/
-#define	REAL_CODE_SEG	0x18
-	.equ	REAL_DATA_SEG,_rmds-_gdt
-	.equ	CR0_PE,1
-
-#ifdef	GAS291
-#define DATA32 data32;
-#define ADDR32 addr32;
-#define	LJMPI(x)	ljmp	x
-#else
-#define DATA32 data32
-#define ADDR32 addr32
-/* newer GAS295 require #define	LJMPI(x)	ljmp	*x */
-#define	LJMPI(x)	ljmp	x
-#endif
-
-#define PIC1_VBS  0x08      /* PIC1 interrupts start at vector 64  */
-#define PIC2_VBS  0x70      /* PIC1 interrupts start at vector 112  */
-
-/*
- * NOTE: if you write a subroutine that is called from C code (gcc/egcs),
- * then you only have to take care of %ebx, %esi, %edi and %ebp.  These
- * registers must not be altered under any circumstance.  All other registers
- * may be clobbered without any negative side effects.  If you don't follow
- * this rule then you'll run into strange effects that only occur on some
- * gcc versions (because the register allocator may use different registers).
- *
- * All the data32 prefixes for the ljmp instructions are necessary, because
- * the assembler emits code with a relocation address of 0.  This means that
- * all destinations are initially negative, which the assembler doesn't grok,
- * because for some reason negative numbers don't fit into 16 bits. The addr32
- * prefixes are there for the same reasons, because otherwise the memory
- * references are only 16 bit wide.  Theoretically they are all superfluous.
- * One last note about prefixes: the data32 prefixes on all call _real_to_prot
- * instructions could be removed if the _real_to_prot function is changed to
- * deal correctly with 16 bit return addresses.  I tried it, but failed.
- */
-
-/**************************************************************************
-START - Where all the fun begins....
-**************************************************************************/
-/* this must be the first thing in the file because we enter from the top */
-	.global	_start
-	.code32
-_start:
-	cli
-	
-	/* load new IDT and GDT */
-	lgdt	gdtarg
-	lidt	Idt_Reg
-	/* flush prefetch queue, and reload %cs:%eip */
-	ljmp	$KERN_CODE_SEG,$1f
-1:
-	
-	/* reload other segment registers */
-	movl	$KERN_DATA_SEG,%eax
-	movl	%eax,%ds
-	movl	%eax,%es
-	movl	%eax,%ss
-        movl    $stktop,%esp
-
-	/* program the PITs in order to stop them */
-        mov	$0x30,%al
-	out	%al,$0x43
-	out	%al,$0x40
-        mov	$0x70,%al
-	out	%al,$0x43
-	out	%al,$0x41
-        mov	$0xf0,%al
-	out	%al,$0x43
-	out	%al,$0x42	
-
-	call	main
-	/* fall through */
-
-	.globl	exit
-exit:
-2:
-        ljmp $KERN_CODE_SEG,$2b
-
-/**************************************************************************
-MEMSIZE - Determine size of extended memory
-**************************************************************************/
-	.globl	memsize
-memsize:
-#if 0
-	pushl	%ebx
-	pushl	%esi
-	pushl	%edi
-	call	_prot_to_real
-	.code16
-	movw	$0xe801,%ax
-	stc
-	int	$0x15
-	jc	1f
-	andl	$0xffff,%eax
-	andl	$0xffff,%ebx
-	shll	$6,%ebx
-	addl	%ebx,%eax
-	jmp	2f
-1:
-	movw	$0x8800,%ax
-	int	$0x15
-	andl	$0xffff,%eax
-2:
-	movl	%eax,%esi
-	DATA32 call	_real_to_prot
-	.code32
-	movl	%esi,%eax
-	popl	%edi
-	popl	%esi
-	popl	%ebx
-#else
-	mov	$32768,%eax
-#endif
-	ret
-
-/**************************************************************************
-XSTART - Transfer control to the kernel just loaded
-**************************************************************************/
-	.code16
-
-	.globl _int08_handler
-_int08_handler:
-	movb	$0x20, %al
-	outb	%al, $0x20
-	iret
-
-	.globl _int10_handler
-_int10_handler:
-	cmp	$0x3, %ah
-	jnz	_int10_04
-	mov	$0x0, %dx
-	mov	$0x0, %cx
-	iret
-_int10_04:
-	cmp	$0x4, %ah
-	jnz	_int10_05
-	mov	$0x0, %ah
-	iret
-_int10_05:
-	cmp	$0x5, %ah
-	jnz	_int10_08
-	mov	$0x0, %al
-	iret
-_int10_08:
-	cmp	$0x8, %ah
-	jnz	_int10_0D
-	mov 	$0x20, %al
-	mov 	$0x7,  %ah
-	iret
-_int10_0D:
-	cmp	$0xD, %ah
-	jnz	_int10_0F
-	mov	$0x0, %al
-	iret
-_int10_0F:
-	cmp	$0xF, %ah
-	jnz	_int10_XX
-	mov	$0xb, %al
-	mov	$80, %ah
-	mov	$0, %bh
-_int10_XX:
-	iret
-	
-	.globl _int11_handler
-_int11_handler:
-	mov	$0x22, %ax
-	iret
-	
-	.globl _int12_handler
-_int12_handler:
-	mov	$640, %ax
-	iret
-	
-	.globl _int13_handler
-_int13_handler:
-	clc
-	mov	$0, %ah
-	iret
-
-	.globl _int14_handler
-_int14_handler:
-	iret
-
-	.globl _int15_handler
-_int15_handler:
-	cmp	$0xe801,%ax
-	jz	_int15_008
-	cmp	$0x0, %ah
-	jz	_int15_000
-	cmp	$0x1, %ah
-	jz	_int15_000
-	cmp	$0x2, %ah
-	jz	_int15_000
-	cmp	$0x3, %ah
-	jz	_int15_000
-	cmp	$0xf, %ah
-	jz	_int15_000
-	cmp	$0x21, %ah
-	jz	_int15_000
-	cmp	$0x40, %ah
-	jz	_int15_000
-	cmp	$0x41, %ah
-	jz	_int15_000
-	cmp	$0x42, %ah
-	jz	_int15_000
-	cmp	$0x43, %ah
-	jz	_int15_000
-	cmp	$0x44, %ah
-	jz	_int15_000
-	cmp	$0x80, %ah
-	jz	_int15_001
-	cmp	$0x81, %ah
-	jz	_int15_001
-	cmp	$0x82, %ah
-	jz	_int15_002
-	cmp	$0x83, %ah
-	jz	_int15_003
-	cmp	$0x84, %ah
-	jz	_int15_000
-	cmp	$0x85, %ah
-	jz	_int15_004
-	cmp	$0x86, %ah
-	jz	_int15_003
-	cmp	$0x87, %ah
-	jz	_int15_005
-	cmp	$0x88, %ah
-	jz	_int15_006
-	cmp	$0x89, %ah
-	jz	_int15_005
-	cmp	$0x90, %ah
-	jz	_int15_007
-	cmp	$0xc0, %ah
-	jz	_int15_000
-	cmp	$0xc1, %ah
-	jz	_int15_000
-	cmp	$0xc2, %ah
-	jz	_int15_000
-	cmp	$0xc3, %ah
-	jz	_int15_000
-	cmp	$0xc4, %ah
-	jz	_int15_000
-	iret
-
-_int15_000:
-	mov	$0x86, %ah
-	stc
-	iret
-
-_int15_001:
-	mov	$0, %bx
-	mov	$0, %cx
-	iret
-
-_int15_002:
-	mov	$0, %bx
-	iret
-
-_int15_003:
-	clc
-	iret
-
-_int15_004:
-	mov	$0, %al
-	iret
-
-_int15_005:
-	mov	$0, %ah
-	clc
-	cmp 	$0, %ah
-	iret
-
-_int15_006:
-	mov	$0xf000, %ax
-	iret
-
-_int15_007:
-	stc
-	iret
-
-_int15_008:
-	clc
-	mov	$1024, %dx	/* dx -> extended memory size (in 64K chuncks) */
-	mov	$640, %cx	/* cx -> conventional memory size (in 1 Kbytes chuncks) */
-	iret
-
-	.globl _int16_handler
-_int16_handler:
-	cmp	$0x0, %ah
-	jnz	_int16_01
-	mov	$0x20, %al
-	mov 	$0x39, %ah
-	iret
-_int16_01:
-	cmp	$0x1, %ah
-	jnz	_int16_02
-	iret
-_int16_02:
-	cmp	$0x2, %ah
-	jnz	_int16_05
-	mov	$0, %al
-	iret
-_int16_05:
-	cmp	$0x5, %ah
-	jnz	_int16_10
-	mov	$0, %al
-	iret
-_int16_10:
-	cmp	$0x10, %ah
-	jnz	_int16_11
-	mov	$0x20, %al
-	mov 	$0x39, %ah
-	iret
-_int16_11:
-	cmp	$0x11, %ah
-	jnz	_int16_12
-	iret
-_int16_12:
-	cmp	$0x12, %ah
-	jnz	_int16_XX
-	mov $0, %ax
-	iret
-_int16_XX:
-	iret
-
-	.globl _int17_handler
-_int17_handler:
-	mov $0xd0, %ah
-	iret
-
-	.globl _int19_handler
-_int19_handler:
-	hlt
-	iret
-
-	.globl _int1A_handler
-_int1A_handler:
-	stc
-	iret
-
-	.code32
-	.globl	xstart
-xstart:
-	/* reprogram the PICs so that interrupt are masked */
-        movb    $0x11,%al	/* ICW1 [ICW4 NEEDED, EDGE TRIGGERED]*/
-	outb    %al,$0x20
-        movb    $PIC1_VBS, %al
-	outb    %al,$0x21
-        movb    $0x4,%al
-	outb    %al,$0x21
-        movb    $0x1,%al
-	outb    %al,$0x21
-        movb    $0xff,%al
-	outb    %al,$0x21
-	
-        movb    $0x11,%al	/* ICW1 [ICW4 NEEDED, EDGE TRIGGERED]*/
-	outb    %al,$0xa0
-        movb    $PIC2_VBS, %al
-	outb    %al,$0xa1
-        movb    $0x2,%al
-	outb    %al,$0xa1
-        movb    $0x1,%al
-	outb    %al,$0xa1
-        movb    $0xff,%al
-	outb    %al,$0xa1
-
-	pushl	%ebp
-	movl	%esp,%ebp
-	pushl	%ebx
-	pushl	%esi
-	pushl	%edi
-	movl	8(%ebp),%eax
-	movl	%eax,_execaddr
-	movl	12(%ebp),%ebx
-	movl	16(%ebp),%ecx	/* bootp record (32bit pointer) */
-	addl	$28,%ecx	/* ip, udp header */
-	shll	$12,%ecx
-	shrw	$12,%cx
-	call	_prot_to_real
-	.code16
-/* MP: add int10 handler */
-	push	%eax
-	push	%ebx
-	push	%es
-	mov	$0,%ax
-	mov	%ax,%es
-	mov	%cs,%ax
-	shl	$16,%eax
-
-	ADDR32 mov	$(_int08_handler-_start),%ax
-	mov	$0x20,%ebx
-	mov	%eax,%es:(%bx)
-
-	ADDR32 mov	$(_int10_handler-_start),%ax
-	mov	$0x40,%ebx
-	mov	%eax,%es:(%bx)
-
-	ADDR32 mov	$(_int11_handler-_start),%ax
-	mov	$0x44,%ebx
-	mov	%eax,%es:(%bx)
-
-	ADDR32 mov	$(_int12_handler-_start),%ax
-	mov	$0x48,%ebx
-	mov	%eax,%es:(%bx)
-
-	ADDR32 mov	$(_int13_handler-_start),%ax
-	mov	$0x4c,%ebx
-	mov	%eax,%es:(%bx)
-
-	ADDR32 mov	$(_int14_handler-_start),%ax
-	mov	$0x50,%ebx
-	mov	%eax,%es:(%bx)
-
-	ADDR32 mov	$(_int15_handler-_start),%ax
-	mov	$0x54,%ebx
-	mov	%eax,%es:(%bx)
-
-	ADDR32 mov	$(_int16_handler-_start),%ax
-	mov	$0x58,%ebx
-	mov	%eax,%es:(%bx)
-
-	ADDR32 mov	$(_int17_handler-_start),%ax
-	mov	$0x5c,%ebx
-	mov	%eax,%es:(%bx)
-
-	ADDR32 mov	$(_int19_handler-_start),%ax
-	mov	$0x64,%ebx
-	mov	%eax,%es:(%bx)
-
-	ADDR32 mov	$(_int1A_handler-_start),%ax
-	mov	$0x68,%ebx
-	mov	%eax,%es:(%bx)
-
-	pop	%es
-	pop	%ebx
-	pop	%eax
-/* */
-	pushl	%ecx		/* bootp record */
-	pushl	%ebx		/* file header */
-	movl	$((RELOC<<12)+(1f-RELOC)),%eax
-	pushl	%eax
-	ADDR32	LJMPI(_execaddr-_start)
-1:
-	addw	$8,%sp		/* XXX or is this 10 in case of a 16bit "ret" */
-	DATA32 call	_real_to_prot
-	.code32
-	popl	%edi
-	popl	%esi
-	popl	%ebx
-	popl	%ebp
-	ret
-
-_execaddr:
-	.long	0
-
-#ifdef	IMAGE_MULTIBOOT
-/**************************************************************************
-XEND - Restart Etherboot from the beginning (from protected mode)
-**************************************************************************/
-
-	.globl	xend
-xend:
-	cs
-	lidt	idtarg_realmode-_start+RELOC
-	cs
-	lgdt	gdtarg-_start+RELOC
-#ifdef	GAS291
-	ljmp	$REAL_CODE_SEG,$1f-RELOC	/* jump to a 16 bit segment */
-#else
-	ljmp	$REAL_CODE_SEG,$1f-_start	/* jump to a 16 bit segment */
-#endif	/* GAS291 */
-1:
-	.code16
-	movw	$REAL_DATA_SEG,%ax
-	movw	%ax,%ds
-	movw	%ax,%ss
-	movw	%ax,%es
-
-	/* clear the PE bit of CR0 */
-	movl	%cr0,%eax
-	andl	$0!CR0_PE,%eax
-	movl	%eax,%cr0
-
-	/* make intersegment jmp to flush the processor pipeline
-	 * and reload %cs:%eip (to clear upper 16 bits of %eip).
-	 */
-	DATA32 ljmp	$(RELOC)>>4,$2f-_start
-2:
-	/* we are in real mode now
-	 * set up the real mode segment registers : %ds, %ss, %es
-	 */
-	movw	%cs,%ax
-	movw	%ax,%ds
-	movw	%ax,%es
-	movw	%ax,%ss
-	xorl	%esp,%esp
-	ADDR32 movw	initsp-RELOC,%sp
-
-	movw	$0,%ax
-	movw	%ax,%fs
-	movw	%ax,%gs
-
-	sti
-	jmp	_start
-
-	.code32
-#endif	/* IMAGE_MULTIBOOT */
-
-.global get_cs
-get_cs:
-	xorl	%eax,%eax
-	movw	%cs,%ax
-	ret
-
-.global get_ds
-get_ds:
-	xorl	%eax,%eax
-	movw	%ds,%ax
-	ret
-
-.global getsp
-getsp:
-	movl	%esp,%eax	/* GET STACK POINTER */
-	subl	$4, %eax 	/* ACCOUNT FOR RETURN ADDRESS ON */
-	ret
-
-.global get_gdtbase
-get_gdtbase:
-	sub	$8,%esp			/* ALLOCATE ROOM ON THE STACK */
-	sgdt	(%esp,1)		/*STORE IGDT REGISTER ON STACK */
-	mov	2(%esp),%eax		/* READ GDT BASE ADDRESS */
-	mov	$KERN_DATA_SEG,%dx 	/* ASSUME UNIVERSAL DS. */
-	add	$8,%esp			/* RESTORE STACK */
-	ret				/* DONE */
-
-.global get_gdtsize
-get_gdtsize:
-	sub 	$8,%esp	/* ALLOCATE ROOM ON THE STACK */
-	sgdt	(%esp,1)	/*STORE IGDT REGISTER ON STACK */
-	xor	%eax,%eax
-	mov	2(%esp),%eax	/* READ GDT BASE ADDRESS */
-	mov	(%ESP),%ax
-	shr	$3,%ax
-	add	$8,%esp	/* RESTORE STACK */
-	ret			/* DONE */
-
-.global get_idtbase
-get_idtbase:
-	sub	$8,%esp
-	sidt   (%esp,1) 	/* STORE IIDT REGISTER ON STACK */
-	mov	2(%esp),%eax
-	mov	$KERN_DATA_SEG,%dx
-	add	$8,%esp
-	ret
-
-.global get_lw
-get_lw:
-	xor	%edx,%edx
-	mov	8(%esp),%eax
-	mov	4(%esp),%dx
-	ret
-	 
-/**************************************************************************
-SETJMP - Save stack context for non-local goto
-**************************************************************************/
-	.globl	setjmp
-setjmp:
-	mov	4(%esp),%ecx
-	mov	0(%esp),%edx
-	mov	%edx,0(%ecx)
-	mov	%ebx,4(%ecx)
-	mov	%esp,8(%ecx)
-	mov	%ebp,12(%ecx)
-	mov	%esi,16(%ecx)
-	mov	%edi,20(%ecx)
-	mov	%eax,24(%ecx)
-	mov	$0,%eax
-	ret
-
-/**************************************************************************
-LONGJMP - Non-local jump to a saved stack context
-**************************************************************************/
-	.globl	longjmp
-longjmp:
-	mov	4(%esp),%edx
-	mov	8(%esp),%eax
-	mov	0(%edx),%ecx
-	mov	4(%edx),%ebx
-	mov	8(%edx),%esp
-	mov	12(%edx),%ebp
-	mov	16(%edx),%esi
-	mov	20(%edx),%edi
-	cmp	$0,%eax
-	jne	1f
-	mov	$1,%eax
-1:	mov	%ecx,0(%esp)
-	ret
-
-/**************************************************************************
-_REAL_TO_PROT - Go from REAL mode to Protected Mode
-**************************************************************************/
-	.globl	_real_to_prot
-_real_to_prot:
-	.code16
-	cli
-	cs
-	ADDR32 lgdt	gdtarg-_start
-	movl	%cr0,%eax
-	orl	$CR0_PE,%eax
-	movl	%eax,%cr0		/* turn on protected mode */
-
-	/* flush prefetch queue, and reload %cs:%eip */
-	DATA32 ljmp	$KERN_CODE_SEG,$1f
-1:
-	.code32
-	/* reload other segment registers */
-	movl	$KERN_DATA_SEG,%eax
-	movl	%eax,%ds
-	movl	%eax,%es
-	movl	%eax,%ss
-	addl	$RELOC,%esp		/* Fix up stack pointer */
-	xorl	%eax,%eax
-	movl	%eax,%fs
-	movl	%eax,%gs
-	popl	%eax			/* Fix up return address */
-	addl	$RELOC,%eax
-	pushl	%eax
-	ret
-
-/**************************************************************************
-_PROT_TO_REAL - Go from Protected Mode to REAL Mode
-**************************************************************************/
-	.globl	_prot_to_real
-_prot_to_real:
-	.code32
-	popl	%eax
-	subl	$RELOC,%eax		/* Adjust return address */
-	pushl	%eax
-	subl	$RELOC,%esp		/* Adjust stack pointer */
-#ifdef	GAS291
-	ljmp	$REAL_CODE_SEG,$1f-RELOC	/* jump to a 16 bit segment */
-#else
-	ljmp	$REAL_CODE_SEG,$1f-_start	/* jump to a 16 bit segment */
-#endif	/* GAS291 */
-1:
-	.code16
-	movw	$REAL_DATA_SEG,%ax
-	movw	%ax,%ds
-	movw	%ax,%ss
-	movw	%ax,%es
-	movw	%ax,%fs
-	movw	%ax,%gs
-	cli
-
-	/* clear the PE bit of CR0 */
-	movl	%cr0,%eax
-	andl	$0!CR0_PE,%eax
-	movl	%eax,%cr0
-
-	/* make intersegment jmp to flush the processor pipeline
-	 * and reload %cs:%eip (to clear upper 16 bits of %eip).
-	 */
-	DATA32 ljmp	$(RELOC)>>4,$2f-_start
-2:
-	/* we are in real mode now
-	 * set up the real mode segment registers : %ds, $ss, %es
-	 */
-	movw	%cs,%ax
-	movw	%ax,%ds
-	movw	%ax,%es
-	movw	%ax,%ss
-#if 0
-	sti
-#endif
-	DATA32 ret	/* There is a 32 bit return address on the stack */
-	.code32
-
-/**************************************************************************
-GLOBAL DESCRIPTOR TABLE
-**************************************************************************/
-	.align	4
-Idt_Reg:
-	.word 0x3ff
-	.long 0
-
-	.align	4
-_gdt:
-gdtarg:
-Gdt_Table:
-	.word	0x27			/* limit */
-	.long	_gdt			/* addr */
-	.word	0
-_pmcs:
-	/* 32 bit protected mode code segment */
-	.word	0xffff,0
-	.byte	0,0x9f,0xcf,0
-
-_pmds:
-	/* 32 bit protected mode data segment */
-	.word	0xffff,0
-	.byte	0,0x93,0xcf,0
-
-_rmcs:
-	/* 16 bit real mode code segment */
-	.word	0xffff,(RELOC&0xffff)
-	.byte	(RELOC>>16),0x9b,0x00,(RELOC>>24)
-
-_rmds:
-	/* 16 bit real mode data segment */
-	.word	0xffff,(RELOC&0xffff)
-	.byte	(RELOC>>16),0x93,0x00,(RELOC>>24)
-
-	.align	4
-RUN_GDT: 			/* POINTER TO GDT IN RAM */
-	 .byte	 0x7f,0		/* [BSP_GDT_NUM*8]-1 */
-	 .long	 Gdt_Table
-
-	.align	4
-
-	.section ".rodata"
-err_not386:
-	.ascii	"Etherboot/32 requires 386+"
-	.byte	0x0d, 0x0a
-err_not386_end:
-
-days:	.long	0
-irq_num: .long
-
-        .data
-	.align	4
-        .org 2048
-.global stktop
-stktop:
-	.long
-
-.section ".armando"
-/*                 1:::::::::2:::::::::3:::::::3 */
-/*        12345678901234567890123456789012345678 */
-/*       v----+----v----+----v----+----v----+--- */
-
-.global EtherbootString
-EtherbootString:
-.ascii	"EtherBoot MPCC  "	/* fw identifier */
-
-.byte	0, 0		/* mandatory hole */
-
-.long	_start		/* entry point */
-.word	0
-.byte	'E'		/* type */
-.byte	0		/* selector */
-.word	0		/* CRC */

contrib/bin2intelhex/Makefile

@@ -1,9 +0,0 @@
-
-CC=gcc
-CFLAGS=-Wall -O2
-
-bin2intelhex:
-
-
-clean:
-	rm -f bin2intelhex core *.o

contrib/bin2intelhex/bin2intelhex.c

@@ -1,148 +0,0 @@
-/* name : bin2intelhex.c
- * from : Jean Marc Lacroix <jeanmarc.lacroix@free.fr>
- * date : 06/12/1997.
- * abstract : Y have rewrite this program from ????? with some modifications
- * to add :
- * - the Intel specification.
- * - correct a bug because my prom programmer don't understand the
- * initial format. Y suspect a bug in the calcul of the lrc
- * in the original program.
- * - correct the format of printf . In the original program, it was
- *   %x, and it is in fact %X, because in the Intel Format, all the
- * char are in upper case.
- * - correct the lrc calculation.
- * usage:
- *-------
- * this program read the standard input and put to the standard output
- * the result of the conversion.
- * an example of use :
- * cat my_bin | bin2intelhex > my_bin.hex or.....
- * bin2intelhex < my_bin > my_bin.hex
- */
-
-
-/*
- * $Id$
- * $Log$
- * Revision 1.1  2005/05/17 16:45:06  mcb30
- * Initial revision
- *
- * Revision 1.9  1997/12/14 05:14:54  install
- * - some documentation....
- *
- */
-
-#include <stdio.h>
-#include <unistd.h>
-
-/* Intel Hex format specifications
-
-The 8-bit Intel Hex File Format is a printable ASCII format consisting of one
- or more data records followed by an end of file record. Each
-record consists of one line of information. Data records may appear in any
- order. Address and data values are represented as 2 or 4 hexadecimal
-digit values. 
-
-Record Format 
-:LLAAAARRDDDD......DDDDCC 
-
-
-LL
-AAAA
-RR
-DD
-CC
-Length field. Number of data bytes.
-Address field. Address of first byte.
-Record type field. 00 for data and 01 for end of record.
-Data field.
-Checksum field. One's complement of length, address, record type and data
- fields modulo 256. 
-CC = LL + AAAA + RR + all DD = 0
-
-Example: 
-:06010000010203040506E4 
-:00000001FF 
-
-The first line in the above example Intel Hex file is a data record addressed
- at location 100H with data values 1 to 6. The second line is the end
-of file record, so that the LL field is 0
-
-*/
-
-
-typedef unsigned char t_u8;
-typedef unsigned short t_u16;
-/*
- * the choice for the total length (16) of a line, but the specification
- * can support an another value
- */
-#define LL_MAX_LINE 16
-typedef struct 
-{ 
-  t_u8 intel_lg_data;
-  t_u16 intel_adr;
-  t_u8 intel_type;
-  t_u8 intel_data [LL_MAX_LINE];
-  t_u8 intel_lrc;
-} t_one_line;
-#define INTEL_DATA_TYPE 0
-#define EXIT_OK 0
-int main (const int argc, const char ** const argv)
-{
-  t_one_line line;
-  /*
-   * init for the adress, please note that it is assume that the program begin at 0
-   */
-  line.intel_adr = 0;
-  line.intel_type = INTEL_DATA_TYPE;
-  /*
-   * read the data on the standard input
-   */
-  while ((line.intel_lg_data = read (0, &line.intel_data [0] ,LL_MAX_LINE )) > 0) 
-    {
-      t_u8 i; 
-      /*
-       * and now for this line, calculate the lrc.
-       */
-      line.intel_lrc = line.intel_lg_data;
-      line.intel_lrc += ((line.intel_adr >> 8) & 0xff);
-      line.intel_lrc += (line.intel_adr &0xff);
-      line.intel_lrc += line.intel_type;
-      /*
-       * the structure is ready, print it to stdout in the
-       * right format
-       */
-      (void) printf (":%02X%04X%02X",
-		     line.intel_lg_data,
-		     line.intel_adr,
-		     line.intel_type);
-      /*
-       * edit all the data read
-       */
-      for (i=0; i<line.intel_lg_data; i++)
-	{
-	  (void) printf ("%02X",
-			 (line.intel_data [i] & 0xff));	  
-	  /*
-	   * add to the lrc the data print
-	   */
-	  line.intel_lrc +=line.intel_data [i];
-	}
-      /*
-       * edit the value of the lrc and new line for the next
-       */
-      (void) printf ("%02X\n",
-			 (0x100 - line.intel_lrc) & 0xff);
-      /* 
-       * prepare the new adress for the next line
-       */
-      line.intel_adr+=line.intel_lg_data;     
-    }
-  /*
-   * print the last line with a length of 0 data, so that the lrc is easy to
-   * calculate (ff+01 =0)
-   */
-  printf (":00000001FF\n");
-  exit (EXIT_OK); 
-}

contrib/bin2intelhex/bin2intelhex.c.simple

@@ -1,74 +0,0 @@
-/* 
-
-  Quick and dirty program to make intel-hex from a binary.
-
-  Written by R.E.Wolff@BitWizard.nl
-  This file is in the public domain
-
-  Typing started:
-
-  Mon Jun 16 00:24:15 MET DST 1997
-
-  programming stopped:
-
-  Mon Jun 16 00:31:27 MET DST 1997
-
-  debugging finished (2 bugs found):
-  Mon Jun 16 00:32:52 MET DST 1997
-
---------------------------------------------------------- 
-
-  Doc written in timeout. Everything else in this file was done while
-  the timer was running.
-
-  I promised "Mark Kopecki" that writing the bin-to-intel-hex
-  converter would cost less than 15 minutes, and that it would be more
-  trouble to find a converter on the net than to write the converter
-  myself.  I ended up spending over half an hour searching for
-  spec/converter/docs because of unreachable hosts on the internet. I
-  got a file with docs, after that it was 8 minutes.....
-
---------------------------------------------------------- 
-
-*/
-
-
-#include <stdio.h>
-#include <unistd.h>
-
-/* Intel Hex format:
-   
-   ll aaaa tt dd....dd cc
- 
-   ll = length
-   aaaa = address
-   tt = type
-   dd....dd = data
-   cc = checksum.
-*/
-
-
-int main (int argc, char **argv)
-{
-  unsigned char buf[32];
-  int addr = 0;
-  int n,i;
-
-  while ((n = read (0, buf+4, 16)) > 0) {
-    buf[0] = n;
-    buf[1] = addr >> 8;
-    buf[2] = addr & 0xff;
-    buf[3] = 0x00;
-    buf[4+n] = 0x00;
-
-    for (i=0;i<4+n;i++)
-      buf[4+n] -= buf[i];
-    printf (":");
-    for (i=0;i<= 4+n;i++)
-      printf ("%02x", buf[i]);
-    printf ("\n");
-    addr += n;
-  }
-  printf (":0000000001ff\n");
-  exit (0);
-}

contrib/bochs/.gitignore

@@ -1,7 +0,0 @@
-bochsout.txt
-parport.out
-ne2k-tx.log
-ne2k-txdump.txt
-tunctl
-bochs
-qemu

contrib/bochs/Makefile

@@ -1,10 +0,0 @@
-all : tunctl serial-console.1
-
-%.1 : %
-	pod2man $< > $@
-
-tunctl : tunctl.c
-	$(CC) -o $@ $<
-
-clean :
-	rm -f serial-console.1 tunctl

contrib/bochs/README

@@ -1,95 +0,0 @@
-Running Etherboot within Bochs
-==============================
-
-Michael Brown <mbrown@fensystems.co.uk>
-Based on an idea suggested by H. Peter Anvin <hpa@zytor.com>.
-
-$Id$
-
-Bochs is a program that simulates a complete Intel x86 computer,
-including hardware.  It can be used to test Etherboot.  There is a
-special pseudo NIC ("pnic") implemented in Bochs, with a corresponding
-driver in Etherboot.  (There is also an NE2000 ISA driver in Bochs,
-but it doesn't seem to quite work.)
-
-To get bochs running is fairly simple:
-
-1.  Build the utilities in this directory:
-      make
-
-2.  Get the bochs source code:
-      cvs -d:pserver:anonymous@bochs.cvs.sourceforge.net:/cvsroot/bochs \
-           login
-      cvs -d:pserver:anonymous@bochs.cvs.sourceforge.net:/cvsroot/bochs \
-           co bochs
-
-3.  Configure bochs with
-      pushd bochs
-      ./configure --enable-all-optimisations --enable-show-ips \
-		  --enable-cpu-level=6 \
-		  --enable-pci --enable-pnic --enable-ne2000 \
-                  --enable-debugger --enable-disasm
-      popd
-
-4.  Build bochs:
-      make -C bochs
-
-5.  As root, set up a TAP virtual network device:
-      /sbin/modprobe tun
-      chmod o+rw /dev/net/tun
-      ./tunctl -u <username> -t tap0
-      /sbin/ifconfig tap0 up 10.254.254.2 netmask 255.255.255.0
-
-6.  As root, add the following fragment to /etc/dhcpd.conf:
-      subnet 10.254.254.0 netmask 255.255.255.252 {
-        range dynamic-bootp 10.254.254.1 10.254.254.1;
-      }
-    You will also need to add in any of your usual declarations for
-    Etherboot, e.g. 'filename "vmlinuz.ltsp";'.  Note that this setup
-    assumes that your DHCP server, TFTP server etc. all live on the
-    machine you are using for running Bochs.  If not, then you're on
-    your own.
-
-7.  As root, restart dhcpd
-      /etc/init.d/dhcpd restart
-
-8.  Build Etherboot images
-      pushd ../../src
-      make bin/pnic.dsk
-      popd
-
-9.  Start Bochs
-      ./bochs/bochs -q
-    You should get to the debugger prompt "<bochs:1>".  Type "c" to
-    start running Bochs.
-
-You should see Bochs start up, load up Etherboot and attempt to boot
-from the network.
-
-
-
-Serial console
-==============
-
-You can use the program "serial-console" to obtain a virtual serial
-console for Etherboot running within Bochs.  Simply run
-"./serial-console" on a spare tty (e.g. a separate xterm window)
-before starting Bochs, and ensure that you have enabled CONSOLE_SERIAL
-in config.h.
-
-There is a manual page for "serial-console"; use
-"man ./serial-console.1" to view it.
-
-
-
-TODO
-====
-
-Packet forwarding/masquerading - document what must be set up.
-
-Mention possibility of using RFB as the display device - in
-conjunction with the serial console, gives you a test facility that
-can be accessed remotely.
-
-Mention use of BOCHSBP instruction (xchgw %bx,%bx) to avoid need to
-calculate breakpoints.

contrib/bochs/README.qemu

@@ -1,79 +0,0 @@
-Running gPXE within qemu
-========================
-
-Michael Brown <mbrown@fensystems.co.uk>
-
-To get qemu running is fairly simple:
-
-1.  Build the utilities in this directory:
-      make
-
-2.  Get the qemu source code:
-      svn co svn://svn.savannah.nongnu.org/qemu/trunk qemu
-
-2a. Patch the qemu code.  There is currently a bug that causes qemu to
-    execute gPXE incredibly slowly.  The bug seems to be related
-    to the relative prioritisation of CPU and I/O operations within
-    qemu.  This patch (which I found via Google) isn't a proper fix,
-    but it does work around the problem:
-      patch -p0 < qemu-patch
-
-3.  Configure qemu with
-      pushd qemu
-      ./configure --target-list=i386-softmmu,x86_64-softmmu
-      popd
-
-4.  Build qemu:
-      make -C qemu
-
-5.  As root, set up a TAP virtual network device:
-      /sbin/modprobe tun
-      chmod o+rw /dev/net/tun
-      ./tunctl -u <username> -t tap0
-      /sbin/ifconfig tap0 up 10.254.254.2 netmask 255.255.255.0
-
-6.  As root, add the following fragment to /etc/dhcpd.conf:
-      subnet 10.254.254.0 netmask 255.255.255.252 {
-        range dynamic-bootp 10.254.254.1 10.254.254.1;
-      }
-    You will also need to add in any of your usual declarations for
-    gPXE, e.g. 'filename "vmlinuz.ltsp";'.  Note that this setup
-    assumes that your DHCP server, TFTP server etc. all live on the
-    machine you are using for running qemu.  If not, then you're on
-    your own.
-
-7.  As root, restart dhcpd
-      /etc/init.d/dhcpd restart
-
-8.  Build gPXE floppy disk images and pad to 1.44MB
-      pushd ../../src
-      make bin/rtl8139.dsk
-      popd
-
-9.  Start qemu
-      ./qemu/i386-softmmu/qemu -L qemu/pc-bios \
-			       -net nic,model=rtl8139 -net tap,ifname=tap0 \
-			       -boot a -fda ../../src/bin/rtl8139.dsk
-
-You should see qemu start up, load up gPXE and attempt to boot from
-the network.
-
-
-
-Serial console
-==============
-
-You can use the program "serial-console" to obtain a virtual serial
-console for gPXE running within qemu.  Run "./serial-console" on a
-spare tty (e.g. a separate xterm window) before starting qemu, and
-ensure that you have enabled CONSOLE_SERIAL in config.h.
-
-When serial-console starts, it will print out the message "Slave pty
-is /dev/pts/XX", where XX is a number.  You need to append the option
-
-   -serial /dev/pts/XX
-
-to the qemu command line.
-
-There is a manual page for "serial-console"; use "man
-./serial-console.1" to view it.

contrib/bochs/README.windows-ris

@@ -1,31 +0,0 @@
-Debugging Windows Remote Installation Services (RIS) can be
-problematic.  Here are some assorted notes on the process:
-
-
-Getting hold of the files
-=========================
-
-Add/Remove Windows Components -> Remote Installation Services
-
-Files will be placed in \windows\system32\reminst.  Copy them out to a
-TFTP server.  Configure DHCP to hand out startrom.com.
-
-
-Getting past the "Press F12" message
-====================================
-
-Passing F12 through to the guest machine is difficult.  It's easier to
-patch the startrom.com binary to accept a different key.  Open
-startrom.com in a hex editor, search for the hex string
-6681fb00860000, and replace it with 6681fb66210000.  startrom.com will
-now accept the "F" key instead of "F12".
-
-
-
-DHCP filename
-=============
-
-Must use Windows backslash separator e.g. 'filename
-"OSChooser\\i386\\startrom.com";', otherwise startrom.com fails to
-correctly identify the path to NTLDR.
-

contrib/bochs/bochs-writable-ROM-patch

@@ -1,20 +0,0 @@
-Index: memory/memory.cc
-===================================================================
-RCS file: /cvsroot/bochs/bochs/memory/memory.cc,v
-retrieving revision 1.71
-diff -u -r1.71 memory.cc
---- memory/memory.cc	18 Oct 2008 18:10:14 -0000	1.71
-+++ memory/memory.cc	21 Oct 2008 19:47:07 -0000
-@@ -172,7 +172,11 @@
-             break;
- 
-           case 0x0:   // Writes to ROM, Inhibit
--            BX_DEBUG(("Write to ROM ignored: address 0x" FMT_PHY_ADDRX ", data %02x", a20addr, *data_ptr));
-+            if ((a20addr & 0xfffe0000) == 0x000e0000) {
-+	      BX_DEBUG(("Write to ROM ignored: address 0x" FMT_PHY_ADDRX ", data %02x", a20addr, *data_ptr));
-+	    } else {
-+	      BX_MEM_THIS rom[(a20addr & EXROM_MASK) + BIOSROMSZ] = *data_ptr;
-+            }
-             break;
- 
-           default:

contrib/bochs/bochsrc.txt

@@ -1,750 +0,0 @@
-# You may now use double quotes around pathnames, in case
-# your pathname includes spaces.
-
-#=======================================================================
-# CONFIG_INTERFACE
-#
-# The configuration interface is a series of menus or dialog boxes that
-# allows you to change all the settings that control Bochs's behavior.
-# There are two choices of configuration interface: a text mode version
-# called "textconfig" and a graphical version called "wx".  The text
-# mode version uses stdin/stdout and is always compiled in.  The graphical
-# version is only available when you use "--with-wx" on the configure 
-# command.  If you do not write a config_interface line, Bochs will 
-# choose a default for you.
-#
-# NOTE: if you use the "wx" configuration interface, you must also use
-# the "wx" display library.
-#=======================================================================
-#config_interface: textconfig
-#config_interface: wx
-
-#=======================================================================
-# DISPLAY_LIBRARY
-#
-# The display library is the code that displays the Bochs VGA screen.  Bochs 
-# has a selection of about 10 different display library implementations for 
-# different platforms.  If you run configure with multiple --with-* options, 
-# the display_library command lets you choose which one you want to run with.
-# If you do not write a display_library line, Bochs will choose a default for
-# you.
-#
-# The choices are: 
-#   x              use X windows interface, cross platform
-#   win32          use native win32 libraries
-#   carbon         use Carbon library (for MacOS X)
-#   beos           use native BeOS libraries
-#   macintosh      use MacOS pre-10
-#   amigaos        use native AmigaOS libraries
-#   sdl            use SDL library, cross platform
-#   svga           use SVGALIB library for Linux, allows graphics without X11
-#   term           text only, uses curses/ncurses library, cross platform
-#   rfb            provides an interface to AT&T's VNC viewer, cross platform
-#   wx             use wxWidgets library, cross platform
-#   nogui          no display at all
-#
-# NOTE: if you use the "wx" configuration interface, you must also use
-# the "wx" display library.
-#
-# Specific options:
-# Some display libraries now support specific option to control their
-# behaviour. See the examples below for currently supported options.
-#=======================================================================
-#display_library: amigaos
-#display_library: beos
-#display_library: carbon
-#display_library: macintosh
-#display_library: nogui
-#display_library: rfb, options="timeout=60" # time to wait for client
-#display_library: sdl, options="fullscreen" # startup in fullscreen mode
-#display_library: term
-#display_library: win32, options="legacyF12" # use F12 to toggle mouse
-#display_library: wx
-#display_library: x
-
-#=======================================================================
-# ROMIMAGE:
-# The ROM BIOS controls what the PC does when it first powers on.
-# Normally, you can use a precompiled BIOS in the source or binary
-# distribution called BIOS-bochs-latest. The ROM BIOS is usually loaded
-# starting at address 0xf0000, and it is exactly 64k long.
-# You can also use the environment variable $BXSHARE to specify the
-# location of the BIOS.
-# The usage of external large BIOS images (up to 512k) at memory top is
-# now supported, but we still recommend to use the BIOS distributed with
-# Bochs. Now the start address can be calculated from image size.
-#=======================================================================
-romimage: file=bochs/bios/BIOS-bochs-latest, address=0xe0000
-#romimage: file=mybios.bin, address=0xfff80000 # 512k at memory top
-#romimage: file=mybios.bin # calculate start address from image size
-
-#=======================================================================
-# CPU:
-# This defines cpu-related parameters inside Bochs:
-#
-#  COUNT:
-#  Set the number of processors:cores per processor:threads per core 
-#  when Bochs is compiled for SMP emulation.
-#  Bochs currently supports up to 8 threads running simultaniosly. 
-#  If Bochs is compiled without SMP support, it won't accept values 
-#  different from 1.
-#
-#  RESET_ON_TRIPLE_FAULT:
-#  Reset the CPU when triple fault occur (highly recommended) rather than
-#  PANIC. Remember that if you trying to continue after triple fault the 
-#  simulation will be completely bogus !
-#
-#  IPS:
-#  Emulated Instructions Per Second.  This is the number of IPS that bochs
-#  is capable of running on your machine. You can recompile Bochs with
-#  --enable-show-ips option enabled, to find your workstation's capability.
-#  Measured IPS value will then be logged into your log file or status bar
-#  (if supported by the gui).
-#
-#  IPS is used to calibrate many time-dependent events within the bochs 
-#  simulation.  For example, changing IPS affects the frequency of VGA
-#  updates, the duration of time before a key starts to autorepeat, and
-#  the measurement of BogoMips and other benchmarks.
-#
-#  Examples:
-#  Machine                                         Mips
-# ________________________________________________________________
-#  2.1Ghz Athlon XP with Linux 2.6/g++ 3.4         12 to 15 Mips
-#  1.6Ghz Intel P4 with Win2000/g++ 3.3             5 to  7 Mips
-#  650Mhz Athlon K-7 with Linux 2.4.4/egcs-2.91.66  2 to  2.5 Mips
-#  400Mhz Pentium II with Linux 2.0.36/egcs-1.0.3   1 to  1.8 Mips
-#=======================================================================
-cpu: count=1, ips=10000000, reset_on_triple_fault=1
-
-#=======================================================================
-# MEGS
-# Set the number of Megabytes of physical memory you want to emulate. 
-# The default is 32MB, most OS's won't need more than that.
-# The maximum amount of memory supported is 2048Mb.
-#=======================================================================
-#megs: 256
-#megs: 128
-#megs: 64
-megs: 32
-#megs: 16
-#megs: 8
-
-#=======================================================================
-# OPTROMIMAGE[1-4]:
-# You may now load up to 4 optional ROM images. Be sure to use a 
-# read-only area, typically between C8000 and EFFFF. These optional
-# ROM images should not overwrite the rombios (located at
-# F0000-FFFFF) and the videobios (located at C0000-C7FFF).
-# Those ROM images will be initialized by the bios if they contain 
-# the right signature (0x55AA) and a valid checksum.
-# It can also be a convenient way to upload some arbitrary code/data
-# in the simulation, that can be retrieved by the boot loader
-#=======================================================================
-#optromimage1: file=optionalrom.bin, address=0xd0000
-#optromimage2: file=optionalrom.bin, address=0xd1000
-#optromimage3: file=optionalrom.bin, address=0xd2000
-#optromimage4: file=optionalrom.bin, address=0xd3000
-optromimage1: file=../../src/bin/pnic.rom, address=0xd0000
-#optromimage1: file=../../src/bin/rtl8029.rom, address=0xd0000
-
-#optramimage1: file=/path/file1.img, address=0x0010000
-#optramimage2: file=/path/file2.img, address=0x0020000
-#optramimage3: file=/path/file3.img, address=0x0030000
-#optramimage4: file=/path/file4.img, address=0x0040000
-
-#=======================================================================
-# VGAROMIMAGE
-# You now need to load a VGA ROM BIOS into C0000.
-#=======================================================================
-#vgaromimage: file=bios/VGABIOS-elpin-2.40
-vgaromimage: file=bochs/bios/VGABIOS-lgpl-latest
-#vgaromimage: file=bios/VGABIOS-lgpl-latest-cirrus
-
-#=======================================================================
-# VGA:
-# Here you can specify the display extension to be used. With the value
-# 'none' you can use standard VGA with no extension. Other supported
-# values are 'vbe' for Bochs VBE and 'cirrus' for Cirrus SVGA support.
-#=======================================================================
-#vga: extension=cirrus
-#vga: extension=vbe
-vga: extension=none
-
-#=======================================================================
-# FLOPPYA:
-# Point this to pathname of floppy image file or device
-# This should be of a bootable floppy(image/device) if you're
-# booting from 'a' (or 'floppy').
-#
-# You can set the initial status of the media to 'ejected' or 'inserted'.
-#   floppya: 2_88=path, status=ejected             (2.88M 3.5" floppy)
-#   floppya: 1_44=path, status=inserted            (1.44M 3.5" floppy)
-#   floppya: 1_2=path, status=ejected              (1.2M  5.25" floppy)
-#   floppya: 720k=path, status=inserted            (720K  3.5" floppy)
-#   floppya: 360k=path, status=inserted            (360K  5.25" floppy)
-#   floppya: 320k=path, status=inserted            (320K  5.25" floppy)
-#   floppya: 180k=path, status=inserted            (180K  5.25" floppy)
-#   floppya: 160k=path, status=inserted            (160K  5.25" floppy)
-#   floppya: image=path, status=inserted           (guess type from image size)
-#
-# The path should be the name of a disk image file.  On Unix, you can use a raw
-# device name such as /dev/fd0 on Linux.  On win32 platforms, use drive letters
-# such as a: or b: as the path.  The parameter 'image' works with image files
-# only. In that case the size must match one of the supported types.
-#=======================================================================
-#floppya: 1_44=/dev/fd0, status=inserted
-#floppya: image=../1.44, status=inserted
-#floppya: 1_44=/dev/fd0H1440, status=inserted
-#floppya: 1_2=../1_2, status=inserted
-#floppya: 1_44=a:, status=inserted
-#floppya: 1_44=a.img, status=inserted
-#floppya: 1_44=/dev/rfd0a, status=inserted
-floppya: 1_44=../../src/bin/pnic.dsk, status=inserted
-
-#=======================================================================
-# FLOPPYB:
-# See FLOPPYA above for syntax
-#=======================================================================
-#floppyb: 1_44=b:, status=inserted
-floppyb: 1_44=b.img, status=inserted
-
-#=======================================================================
-# ATA0, ATA1, ATA2, ATA3
-# ATA controller for hard disks and cdroms
-#
-# ata[0-3]: enabled=[0|1], ioaddr1=addr, ioaddr2=addr, irq=number
-# 
-# These options enables up to 4 ata channels. For each channel
-# the two base io addresses and the irq must be specified.
-# 
-# ata0 and ata1 are enabled by default with the values shown below
-#
-# Examples:
-#   ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
-#   ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
-#   ata2: enabled=1, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
-#   ata3: enabled=1, ioaddr1=0x168, ioaddr2=0x360, irq=9
-#=======================================================================
-ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
-ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
-ata2: enabled=0, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
-ata3: enabled=0, ioaddr1=0x168, ioaddr2=0x360, irq=9
-
-#=======================================================================
-# ATA[0-3]-MASTER, ATA[0-3]-SLAVE
-#
-# This defines the type and characteristics of all attached ata devices:
-#   type=       type of attached device [disk|cdrom] 
-#   mode=       only valid for disks [flat|concat|external|dll|sparse|vmware3]
-#   mode=       only valid for disks [undoable|growing|volatile]
-#   path=       path of the image
-#   cylinders=  only valid for disks
-#   heads=      only valid for disks
-#   spt=        only valid for disks
-#   status=     only valid for cdroms [inserted|ejected]
-#   biosdetect= type of biosdetection [none|auto], only for disks on ata0 [cmos]
-#   translation=type of translation of the bios, only for disks [none|lba|large|rechs|auto]
-#   model=      string returned by identify device command
-#   journal=    optional filename of the redolog for undoable and volatile disks
-#   
-# Point this at a hard disk image file, cdrom iso file, or physical cdrom
-# device.  To create a hard disk image, try running bximage.  It will help you
-# choose the size and then suggest a line that works with it.
-#
-# In UNIX it may be possible to use a raw device as a Bochs hard disk, 
-# but WE DON'T RECOMMEND IT.  In Windows there is no easy way.
-#
-# In windows, the drive letter + colon notation should be used for cdroms.
-# Depending on versions of windows and drivers, you may only be able to 
-# access the "first" cdrom in the system.  On MacOSX, use path="drive"
-# to access the physical drive.
-#
-# The path is always mandatory. For flat hard disk images created with
-# bximage geometry autodetection can be used (cylinders=0 -> cylinders are
-# calculated using heads=16 and spt=63). For other hard disk images and modes
-# the cylinders, heads, and spt are mandatory.
-#
-# Default values are:
-#   mode=flat, biosdetect=auto, translation=auto, model="Generic 1234"
-#
-# The biosdetect option has currently no effect on the bios
-#
-# Examples:
-#   ata0-master: type=disk, mode=flat, path=10M.sample, cylinders=306, heads=4, spt=17
-#   ata0-slave:  type=disk, mode=flat, path=20M.sample, cylinders=615, heads=4, spt=17
-#   ata1-master: type=disk, mode=flat, path=30M.sample, cylinders=615, heads=6, spt=17
-#   ata1-slave:  type=disk, mode=flat, path=46M.sample, cylinders=940, heads=6, spt=17
-#   ata2-master: type=disk, mode=flat, path=62M.sample, cylinders=940, heads=8, spt=17
-#   ata2-slave:  type=disk, mode=flat, path=112M.sample, cylinders=900, heads=15, spt=17
-#   ata3-master: type=disk, mode=flat, path=483M.sample, cylinders=1024, heads=15, spt=63
-#   ata3-slave:  type=cdrom, path=iso.sample, status=inserted
-#=======================================================================
-#ata0-master: type=disk, mode=flat, path="30M.sample", cylinders=615, heads=6, spt=17
-#ata0-slave: type=cdrom, path=D:, status=inserted
-#ata0-slave: type=cdrom, path=/dev/cdrom, status=inserted
-#ata0-slave: type=cdrom, path="drive", status=inserted
-#ata0-slave: type=cdrom, path=/dev/rcd0d, status=inserted 
-
-#=======================================================================
-# BOOT:
-# This defines the boot sequence. Now you can specify up to 3 boot drives.
-# You can either boot from 'floppy', 'disk' or 'cdrom'
-# legacy 'a' and 'c' are also supported
-# Examples:
-#   boot: floppy
-#   boot: disk
-#   boot: cdrom
-#   boot: c
-#   boot: a
-#   boot: cdrom, floppy, disk
-#=======================================================================
-#boot: floppy
-#boot: disk
-
-#=======================================================================
-# CLOCK:
-# This defines the parameters of the clock inside Bochs:
-#
-#  SYNC:
-#  TO BE COMPLETED (see Greg explanation in feature request #536329)
-#
-#  TIME0:
-#  Specifies the start (boot) time of the virtual machine. Use a time 
-#  value as returned by the time(2) system call. If no time0 value is 
-#  set or if time0 equal to 1 (special case) or if time0 equal 'local', 
-#  the simulation will be started at the current local host time.
-#  If time0 equal to 2 (special case) or if time0 equal 'utc',
-#  the simulation will be started at the current utc time.
-#
-# Syntax:
-#  clock: sync=[none|slowdown|realtime|both], time0=[timeValue|local|utc]
-#
-# Example:
-#   clock: sync=none,     time0=local       # Now (localtime)
-#   clock: sync=slowdown, time0=315529200   # Tue Jan  1 00:00:00 1980
-#   clock: sync=none,     time0=631148400   # Mon Jan  1 00:00:00 1990
-#   clock: sync=realtime, time0=938581955   # Wed Sep 29 07:12:35 1999
-#   clock: sync=realtime, time0=946681200   # Sat Jan  1 00:00:00 2000
-#   clock: sync=none,     time0=1           # Now (localtime)
-#   clock: sync=none,     time0=utc         # Now (utc/gmt)
-# 
-# Default value are sync=none, time0=local
-#=======================================================================
-#clock: sync=none, time0=local
-
-
-#=======================================================================
-# FLOPPY_BOOTSIG_CHECK: disabled=[0|1]
-# Enables or disables the 0xaa55 signature check on boot floppies
-# Defaults to disabled=0
-# Examples:
-#   floppy_bootsig_check: disabled=0
-#   floppy_bootsig_check: disabled=1
-#=======================================================================
-#floppy_bootsig_check: disabled=1
-floppy_bootsig_check: disabled=0
-
-#=======================================================================
-# LOG:
-# Give the path of the log file you'd like Bochs debug and misc. verbiage
-# to be written to. If you don't use this option or set the filename to
-# '-' the output is written to the console. If you really don't want it,
-# make it "/dev/null" (Unix) or "nul" (win32). :^(
-#
-# Examples:
-#   log: ./bochs.out
-#   log: /dev/tty
-#=======================================================================
-#log: /dev/null
-log: bochsout.txt
-
-#=======================================================================
-# LOGPREFIX:
-# This handles the format of the string prepended to each log line.
-# You may use those special tokens :
-#   %t : 11 decimal digits timer tick
-#   %i : 8 hexadecimal digits of cpu current eip (ignored in SMP configuration)
-#   %e : 1 character event type ('i'nfo, 'd'ebug, 'p'anic, 'e'rror)
-#   %d : 5 characters string of the device, between brackets
-# 
-# Default : %t%e%d
-# Examples:
-#   logprefix: %t-%e-@%i-%d
-#   logprefix: %i%e%d
-#=======================================================================
-#logprefix: %t%e%d
-
-#=======================================================================
-# LOG CONTROLS
-#
-# Bochs now has four severity levels for event logging.
-#   panic: cannot proceed.  If you choose to continue after a panic, 
-#          don't be surprised if you get strange behavior or crashes.
-#   error: something went wrong, but it is probably safe to continue the
-#          simulation.
-#   info: interesting or useful messages.
-#   debug: messages useful only when debugging the code.  This may
-#          spit out thousands per second.
-#
-# For events of each level, you can choose to crash, report, or ignore.
-# TODO: allow choice based on the facility: e.g. crash on panics from
-#       everything except the cdrom, and only report those.
-#
-# If you are experiencing many panics, it can be helpful to change
-# the panic action to report instead of fatal.  However, be aware
-# that anything executed after a panic is uncharted territory and can 
-# cause bochs to become unstable.  The panic is a "graceful exit," so
-# if you disable it you may get a spectacular disaster instead.
-#=======================================================================
-panic: action=ask
-error: action=report
-info: action=report
-debug: action=ignore
-#pass: action=fatal
-
-#=======================================================================
-# DEBUGGER_LOG:
-# Give the path of the log file you'd like Bochs to log debugger output.
-# If you really don't want it, make it /dev/null or '-'. :^(
-#
-# Examples:
-#   debugger_log: ./debugger.out
-#=======================================================================
-#debugger_log: /dev/null
-#debugger_log: debugger.out
-debugger_log: -
-
-#=======================================================================
-# COM1, COM2, COM3, COM4:
-# This defines a serial port (UART type 16550A). In the 'term' you can specify
-# a device to use as com1. This can be a real serial line, or a pty.  To use
-# a pty (under X/Unix), create two windows (xterms, usually).  One of them will
-# run bochs, and the other will act as com1. Find out the tty the com1
-# window using the `tty' command, and use that as the `dev' parameter.
-# Then do `sleep 1000000' in the com1 window to keep the shell from
-# messing with things, and run bochs in the other window.  Serial I/O to
-# com1 (port 0x3f8) will all go to the other window.
-# Other serial modes are 'null' (no input/output), 'file' (output to a file
-# specified as the 'dev' parameter), 'raw' (use the real serial port - under
-# construction for win32), 'mouse' (standard serial mouse - requires
-# mouse option setting 'type=serial' or 'type=serial_wheel') and 'socket'
-# (connect a networking socket).
-#
-# Examples:
-#   com1: enabled=1, mode=null
-#   com1: enabled=1, mode=mouse
-#   com2: enabled=1, mode=file, dev=serial.out
-#   com3: enabled=1, mode=raw, dev=com1
-#   com3: enabled=1, mode=socket, dev=localhost:8888
-#=======================================================================
-#com1: enabled=1, mode=term, dev=/dev/ttyp9
-
-
-#=======================================================================
-# PARPORT1, PARPORT2:
-# This defines a parallel (printer) port. When turned on and an output file is
-# defined the emulated printer port sends characters printed by the guest OS
-# into the output file. On some platforms a device filename can be used to
-# send the data to the real parallel port (e.g. "/dev/lp0" on Linux, "lpt1" on
-# win32 platforms).
-#
-# Examples:
-#   parport1: enabled=1, file="parport.out"
-#   parport2: enabled=1, file="/dev/lp0"
-#   parport1: enabled=0
-#=======================================================================
-parport1: enabled=1, file="parport.out"
-
-#=======================================================================
-# SB16:
-# This defines the SB16 sound emulation. It can have several of the
-# following properties.
-# All properties are in the format sb16: property=value
-# midi: The filename is where the midi data is sent. This can be a
-#       device or just a file if you want to record the midi data.
-# midimode:
-#      0=no data
-#      1=output to device (system dependent. midi denotes the device driver)
-#      2=SMF file output, including headers
-#      3=output the midi data stream to the file (no midi headers and no
-#        delta times, just command and data bytes)
-# wave: This is the device/file where wave output is stored
-# wavemode:
-#      0=no data
-#      1=output to device (system dependent. wave denotes the device driver)
-#      2=VOC file output, incl. headers
-#      3=output the raw wave stream to the file
-# log:  The file to write the sb16 emulator messages to.
-# loglevel:
-#      0=no log
-#      1=resource changes, midi program and bank changes
-#      2=severe errors
-#      3=all errors
-#      4=all errors plus all port accesses
-#      5=all errors and port accesses plus a lot of extra info
-# dmatimer:
-#      microseconds per second for a DMA cycle.  Make it smaller to fix
-#      non-continuous sound.  750000 is usually a good value.  This needs a
-#      reasonably correct setting for the IPS parameter of the CPU option.
-#
-# For an example look at the next line:
-#=======================================================================
-
-#sb16: midimode=1, midi=/dev/midi00, wavemode=1, wave=/dev/dsp, loglevel=2, log=sb16.log, dmatimer=600000
-
-#=======================================================================
-# VGA_UPDATE_INTERVAL:
-# Video memory is scanned for updates and screen updated every so many
-# virtual seconds.  The default is 40000, about 25Hz. Keep in mind that
-# you must tweak the 'cpu: ips=N' directive to be as close to the number
-# of emulated instructions-per-second your workstation can do, for this
-# to be accurate.
-#
-# Examples:
-#   vga_update_interval: 250000
-#=======================================================================
-vga_update_interval: 300000
-
-# using for Winstone '98 tests
-#vga_update_interval:  100000
-
-#=======================================================================
-# KEYBOARD_SERIAL_DELAY:
-# Approximate time in microseconds that it takes one character to
-# be transfered from the keyboard to controller over the serial path.
-# Examples:
-#   keyboard_serial_delay: 200
-#=======================================================================
-keyboard_serial_delay: 250
-
-#=======================================================================
-# KEYBOARD_PASTE_DELAY:
-# Approximate time in microseconds between attempts to paste
-# characters to the keyboard controller. This leaves time for the
-# guest os to deal with the flow of characters.  The ideal setting
-# depends on how your operating system processes characters.  The
-# default of 100000 usec (.1 seconds) was chosen because it works 
-# consistently in Windows.
-#
-# If your OS is losing characters during a paste, increase the paste
-# delay until it stops losing characters.
-#
-# Examples:
-#   keyboard_paste_delay: 100000
-#=======================================================================
-keyboard_paste_delay: 100000
-
-#=======================================================================
-# MOUSE: 
-# This option prevents Bochs from creating mouse "events" unless a mouse
-# is  enabled. The hardware emulation itself is not disabled by this.
-# You can turn the mouse on by setting enabled to 1, or turn it off by
-# setting enabled to 0. Unless you have a particular reason for enabling
-# the mouse by default, it is recommended that you leave it off.
-# You can also toggle the mouse usage at runtime (control key + middle
-# mouse button on X11, SDL, wxWidgets and Win32).
-# With the mouse type option you can select the type of mouse to emulate.
-# The default value is 'ps2'. The other choices are 'imps2' (wheel mouse
-# on PS/2), 'serial', 'serial_wheel' (one com port requires setting
-# 'mode=mouse') and 'usb' (3-button mouse - one of the USB ports must be
-# connected with the 'mouse' device - requires PCI and USB support).
-#
-# Examples:
-#   mouse: enabled=1
-#   mouse: enabled=1, type=imps2
-#   mouse: enabled=1, type=serial
-#   mouse: enabled=0
-#=======================================================================
-mouse: enabled=0
-
-#=======================================================================
-# private_colormap: Request that the GUI create and use it's own
-#                   non-shared colormap.  This colormap will be used
-#                   when in the bochs window.  If not enabled, a
-#                   shared colormap scheme may be used.  Not implemented
-#                   on all GUI's.
-#
-# Examples:
-#   private_colormap: enabled=1
-#   private_colormap: enabled=0
-#=======================================================================
-private_colormap: enabled=0
-
-#=======================================================================
-# fullscreen: ONLY IMPLEMENTED ON AMIGA
-#             Request that Bochs occupy the entire screen instead of a 
-#             window.
-#
-# Examples:
-#   fullscreen: enabled=0
-#   fullscreen: enabled=1
-#=======================================================================
-#fullscreen: enabled=0
-#screenmode: name="sample"
-
-#=======================================================================
-# ne2k: NE2000 compatible ethernet adapter
-#
-# Examples:
-# ne2k: ioaddr=IOADDR, irq=IRQ, mac=MACADDR, ethmod=MODULE, ethdev=DEVICE, script=SCRIPT
-#
-# ioaddr, irq: You probably won't need to change ioaddr and irq, unless there
-# are IRQ conflicts.
-#
-# mac: The MAC address MUST NOT match the address of any machine on the net.
-# Also, the first byte must be an even number (bit 0 set means a multicast
-# address), and you cannot use ff:ff:ff:ff:ff:ff because that's the broadcast
-# address.  For the ethertap module, you must use fe:fd:00:00:00:01.  There may
-# be other restrictions too.  To be safe, just use the b0:c4... address.
-#
-# ethdev: The ethdev value is the name of the network interface on your host
-# platform.  On UNIX machines, you can get the name by running ifconfig.  On
-# Windows machines, you must run niclist to get the name of the ethdev.
-# Niclist source code is in misc/niclist.c and it is included in Windows 
-# binary releases.
-#
-# script: The script value is optional, and is the name of a script that 
-# is executed after bochs initialize the network interface. You can use 
-# this script to configure this network interface, or enable masquerading.
-# This is mainly useful for the tun/tap devices that only exist during
-# Bochs execution. The network interface name is supplied to the script
-# as first parameter
-#
-# If you don't want to make connections to any physical networks,
-# you can use the following 'ethmod's to simulate a virtual network.
-#   null: All packets are discarded, but logged to a few files.
-#   arpback: ARP is simulated. Disabled by default.
-#   vde:  Virtual Distributed Ethernet
-#   vnet: ARP, ICMP-echo(ping), DHCP and read/write TFTP are simulated.
-#         The virtual host uses 192.168.10.1.
-#         DHCP assigns 192.168.10.2 to the guest.
-#         TFTP uses the ethdev value for the root directory and doesn't
-#         overwrite files.
-#
-#=======================================================================
-# ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01, ethmod=fbsd, ethdev=en0 #macosx
-# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:00, ethmod=fbsd, ethdev=xl0
-# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:00, ethmod=linux, ethdev=eth0
-# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:01, ethmod=win32, ethdev=MYCARD
-# ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01, ethmod=tap, ethdev=tap0
-# ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01, ethmod=tuntap, ethdev=/dev/net/tun0, script=./tunconfig
-# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:01, ethmod=null, ethdev=eth0
-# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:01, ethmod=vde, ethdev="/tmp/vde.ctl"
-# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:01, ethmod=vnet, ethdev="c:/temp"
-pnic: mac=fe:fd:00:00:00:01, ethmod=tuntap, ethdev=/dev/net/tun:tap0
-#ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01, ethmod=tuntap, ethdev=/dev/net/tun:tap0
-
-#=======================================================================
-# KEYBOARD_MAPPING:
-# This enables a remap of a physical localized keyboard to a 
-# virtualized us keyboard, as the PC architecture expects.
-# If enabled, the keymap file must be specified.
-# 
-# Examples:
-#   keyboard_mapping: enabled=1, map=gui/keymaps/x11-pc-de.map
-#=======================================================================
-keyboard_mapping: enabled=0, map=
-
-#=======================================================================
-# KEYBOARD_TYPE:
-# Type of keyboard return by a "identify keyboard" command to the
-# keyboard controler. It must be one of "xt", "at" or "mf".
-# Defaults to "mf". It should be ok for almost everybody. A known
-# exception is french macs, that do have a "at"-like keyboard.
-#
-# Examples:
-#   keyboard_type: mf
-#=======================================================================
-#keyboard_type: mf
-
-#=======================================================================
-# USER_SHORTCUT:
-# This defines the keyboard shortcut to be sent when you press the "user"
-# button in the headerbar. The shortcut string is a combination of maximum
-# 3 key names (listed below) separated with a '-' character. The old-style
-# syntax (without the '-') still works for the key combinations supported
-# in Bochs 2.2.1.
-# Valid key names:
-# "alt", "bksl", "bksp", "ctrl", "del", "down", "end", "enter", "esc",
-# "f1", ... "f12", "home", "ins", "left", "menu", "minus", "pgdwn", "pgup",
-# "plus", "right", "shift", "space", "tab", "up", and "win".
-#
-# Example:
-#   user_shortcut: keys=ctrl-alt-del
-#=======================================================================
-user_shortcut: keys=ctrl-alt-del
-
-#=======================================================================
-# I440FXSUPPORT:
-# This option controls the presence of the i440FX PCI chipset. You can
-# also specify the devices connected to PCI slots. Up to 5 slots are
-# available now. These devices are currently supported: ne2k, pcivga,
-# pcidev and pcipnic. If Bochs is compiled with Cirrus SVGA support
-# you'll have the additional choice 'cirrus'.
-#
-# Example:
-#   i440fxsupport: enabled=1, slot1=pcivga, slot2=ne2k
-#=======================================================================
-i440fxsupport: enabled=1, slot1=pcipnic
-#i440fxsupport: enabled=1, slot1=ne2k
-
-#=======================================================================
-# USB1:
-# This option controls the presence of the USB root hub which is a part
-# of the i440FX PCI chipset. With the portX option you can connect devices
-# to the hub (currently supported: 'mouse' and 'keypad'). If you connect
-# the mouse to one of the ports and use the mouse option 'type=usb' you'll
-# have a 3-button USB mouse.
-#
-# Example:
-#   usb1: enabled=1, port1=mouse, port2=keypad
-#=======================================================================
-#usb1: enabled=1
-
-#=======================================================================
-# CMOSIMAGE:
-# This defines image file that can be loaded into the CMOS RAM at startup.
-# The rtc_init parameter controls whether initialize the RTC with values stored
-# in the image. By default the time0 argument given to the clock option is used.
-# With 'rtc_init=image' the image is the source for the initial time.
-#
-# Example:
-#   cmosimage: file=cmos.img, rtc_init=image
-#=======================================================================
-#cmosimage: file=cmos.img, rtc_init=time0
-
-#=======================================================================
-# other stuff
-#=======================================================================
-magic_break: enabled=1
-#load32bitOSImage: os=nullkernel, path=../kernel.img, iolog=../vga_io.log
-#load32bitOSImage: os=linux, path=../linux.img, iolog=../vga_io.log, initrd=../initrd.img
-#text_snapshot_check: enable
-
-#-------------------------
-# PCI host device mapping
-#-------------------------
-#pcidev: vendor=0x1234, device=0x5678
-
-#=======================================================================
-# GDBSTUB:
-# Enable GDB stub. See user documentation for details.
-# Default value is enabled=0.
-#=======================================================================
-#gdbstub: enabled=0, port=1234, text_base=0, data_base=0, bss_base=0
-
-#=======================================================================
-# IPS:
-# The IPS directive is DEPRECATED. Use the parameter IPS of the CPU
-# directive instead.
-#=======================================================================
-#ips: 10000000
-
-#=======================================================================
-# for Macintosh, use the style of pathnames in the following
-# examples.
-#
-# vgaromimage: :bios:VGABIOS-elpin-2.40
-# romimage: file=:bios:BIOS-bochs-latest, address=0xf0000
-# floppya: 1_44=[fd:], status=inserted
-#=======================================================================

contrib/bochs/qemu-patch

@@ -1,26 +0,0 @@
-Index: qemu/cpu-exec.c
-===================================================================
-RCS file: /sources/qemu/qemu/cpu-exec.c,v
-retrieving revision 1.84
-diff -u -r1.84 cpu-exec.c
---- qemu/cpu-exec.c	29 Jul 2006 19:09:31 -0000	1.84
-+++ qemu/cpu-exec.c	28 Aug 2006 01:54:15 -0000
-@@ -788,6 +788,18 @@
-                     cpu_loop_exit();
-                 }
- #endif
-+#if 1
-+#define MIN_CYCLE_COUNT 100
-+		{
-+                    static int cycle_count;
-+		  
-+		    if (++cycle_count > MIN_CYCLE_COUNT) {
-+                        cycle_count = 0;
-+                        env->exception_index = EXCP_INTERRUPT;
-+                        cpu_loop_exit();
-+                    }
-+		}
-+#endif
-             }
-         } else {
-             env_to_regs();

contrib/bochs/serial-console

@@ -1,278 +0,0 @@
-#!/usr/bin/perl -w
-
-=head1 NAME
-
-serial-console
-
-=head1 SYNOPSIS
-
-serial-console [options]
-
-Options:
-
-    -h,--help         Display brief help message
-    -v,--verbose      Increase verbosity
-    -q,--quiet        Decrease verbosity
-    -l,--log FILE     Log output to file
-    -r,--rcfile	FILE  Modify specified bochsrc file
-
-=head1 DESCRIPTION
-
-C<serial-console> provides a virtual serial console for use with
-Bochs.  Running C<serial-console> creates a pseudo-tty.  The master
-side of this pty is made available to the user for interaction; the
-slave device is written to the Bochs configuration file
-(C<bochsrc.txt>) for use by a subsequent Bochs session.
-
-=head1 EXAMPLES
-
-=over 4
-
-=item C<serial-console>
-
-Create a virtual serial console for Bochs, modify C<bochsrc.txt>
-appropriately.
-
-=item C<serial-console -r ../.bochsrc -l serial.log>
-
-Create a virtual serial console for Bochs, modify C<../.bochsrc>
-appropriately, log output to C<serial.log>.
-
-=back
-
-=head1 INVOCATION
-
-Before starting Bochs, run C<serial-console> in a different session
-(e.g. a different xterm window).  When you subsequently start Bochs,
-anything that the emulated machine writes to its serial port will
-appear in the window running C<serial-console>, and anything typed in
-the C<serial-console> window will arrive on the emulated machine's
-serial port.
-
-You do B<not> need to rerun C<serial-console> afresh for each Bochs
-session.
-
-=head1 OPTIONS
-
-=over 4
-
-=item B<-l,--log FILE>
-
-Log all output (i.e. everything that is printed in the
-C<serial-console> window) to the specified file.
-
-=item B<-r,--rcfile FILE>
-
-Modify the specified bochsrc file.  The file will be updated to
-contain the path to the slave side of the psuedo tty that we create.
-The original file will be restored when C<serial-console> exits.  The
-default is to modify the file C<bochsrc.txt> in the current directory.
-
-To avoid modifying any bochsrc file, use C<--norcfile>.
-
-=back
-
-=cut
-
-use IO::Pty;
-use IO::Select;
-use File::Spec::Functions qw ( :ALL );
-use Getopt::Long;
-use Pod::Usage;
-use POSIX qw ( :termios_h );
-use strict;
-use warnings;
-
-my $o;
-my $restore_file = {};
-my $restore_termios;
-use constant BLOCKSIZE => 8192;
-
-##############################################################################
-#
-# Parse command line options into options hash ($o)
-#
-# $o = parse_opts();
-
-sub parse_opts {
-  # $o is the hash that will hold the options
-  my $o = {
-    verbosity => 1,
-    rcfile => 'bochsrc.txt',
-  };
-  # Special handlers for some options
-  my $opt_handlers = {
-    verbose => sub { $o->{verbosity}++; },
-    quiet => sub { $o->{verbosity}--; },
-    help => sub { pod2usage(1); },
-    norcfile => sub { delete $o->{rcfile}; },
-  };
-  # Merge handlers into main options hash (so that Getopt::Long can find them)
-  $o->{$_} = $opt_handlers->{$_} foreach keys %$opt_handlers;
-  # Option specifiers for Getopt::Long
-  my @optspec = ( 'help|h|?',
-                  'quiet|q+',
-                  'verbose|v+',
-		  'log|l=s',
-		  'rcfile|r=s',
-		  'norcfile',
-                  );
-  # Do option parsing
-  Getopt::Long::Configure ( 'bundling' );
-  pod2usage("Error parsing command-line options") unless GetOptions (
-  $o, @optspec );
-  # Clean up $o by removing the handlers
-  delete $o->{$_} foreach keys %$opt_handlers;
-  return $o;
-}
-
-##############################################################################
-#
-# Modify bochsrc file
-
-sub patch_bochsrc {
-  my $active = shift;
-  my $pty = shift;
-
-  # Rename active file to backup file
-  ( my $vol, my $dir, my $file ) = splitpath ( $active );
-  $file = '.'.$file.".serial-console";
-  my $backup = catpath ( $vol, $dir, $file );
-  rename $active, $backup
-      or die "Could not back up $active to $backup: $!\n";
-
-  # Derive line to be inserted
-  my $patch = "com1: enabled=1, mode=term, dev=$pty\n";
-
-  # Modify file
-  open my $old, "<$backup" or die "Could not open $backup: $!\n";
-  open my $new, ">$active" or die "Could not open $active: $!\n";
-  print $new <<"EOF";
-##################################################
-#
-# This file has been modified by serial-console.
-#
-# Do not modify this file; it will be erased when
-# serial-console (pid $$) exits and will be
-# replaced with the backup copy held in
-# $backup.
-#
-##################################################
-
-
-EOF
-  my $patched;
-  while ( my $line = <$old> ) {
-    if ( $line =~ /^\s*\#?\s*com1:\s*\S/ ) {
-      if ( ! $patched ) {
-	$line = $patch;
-	$patched = 1;
-      } else {
-	$line = '# '.$line unless $line =~ /^\s*\#/;
-      }
-    }
-    print $new $line;
-  }
-  print $new $patch unless $patched;
-  close $old;
-  close $new;
-
-  return $backup;
-}
-
-##############################################################################
-#
-# Attach/detach message printing and terminal settings
-
-sub bochs_attached {
-  print STDERR "Bochs attached.\n\n\n"
-      if $o->{verbosity} >= 1;
-}
-
-sub bochs_detached {
-  print STDERR "\n\nWaiting for bochs to attach...\n"
-      if $o->{verbosity} >= 1;
-}
-
-##############################################################################
-#
-# Main program
-
-$o = parse_opts();
-pod2usage(1) if @ARGV;
-
-# Catch signals
-my $sigdie = sub { die "Exiting via signal\n"; };
-$SIG{INT} = $sigdie;
-
-# Create Pty, close slave side
-my $pty = IO::Pty->new();
-$pty->close_slave();
-$pty->set_raw();
-print STDERR "Slave pty is ".$pty->ttyname."\n" if $o->{verbosity} >= 1;
-
-# Open logfile
-my $log;
-if ( $o->{log} ) {
-  open $log, ">$o->{log}" or die "Could not open $o->{log}: $!\n";
-}
-
-# Set up terminal
-my $termios;
-if ( -t STDIN ) {
-  $termios = POSIX::Termios->new;
-  $restore_termios = POSIX::Termios->new;
-  $termios->getattr ( fileno(STDIN) );
-  $restore_termios->getattr ( fileno(STDIN) );
-  $termios->setlflag ( $termios->getlflag & ~(ICANON) & ~(ECHO) );
-  $termios->setiflag ( $termios->getiflag & ~(ICRNL) );
-  $termios->setattr ( fileno(STDIN), TCSANOW );
-}
-
-# Modify bochsrc file
-$restore_file = { $o->{rcfile} =>
-		  patch_bochsrc ( $o->{rcfile}, $pty->ttyname ) }
-    if $o->{rcfile};
-
-# Start character shunt
-my $attached = 1;
-my $select = IO::Select->new ( \*STDIN, $pty );
-while ( 1 ) {
-  my %can_read = map { $_ => 1 }
-  		     $select->can_read ( $attached ? undef : 1 );
-  if ( $can_read{\*STDIN} ) {
-    sysread ( STDIN, my $data, BLOCKSIZE )
-	or die "Cannot read from STDIN: $!\n";
-    $pty->syswrite ( $data );
-  }
-  if ( $can_read{$pty} ) {
-    if ( $pty->sysread ( my $data, BLOCKSIZE ) ) {
-      # Actual data available
-      bochs_attached() if $attached == 0;
-      $attached = 1;
-      syswrite ( STDOUT, $data );
-      $log->syswrite ( $data ) if $log;
-    } else {
-      # No data available but select() says we can read.  This almost
-      # certainly indicates that nothing is attached to the slave.
-      bochs_detached() if $attached == 1;
-      $attached = 0;
-      sleep ( 1 );
-    }
-  } else {
-    bochs_attached() if $attached == 0;
-    $attached = 1;
-  }
-}
-
-END {
-  # Restore bochsrc file if applicable
-  if ( ( my $orig_file, my $backup_file ) = %$restore_file ) {
-    unlink $orig_file;
-    rename $backup_file, $orig_file;
-  }
-  # Restore terminal settings if applicable
-  if ( $restore_termios ) {
-    $restore_termios->setattr ( fileno(STDIN), TCSANOW );
-  }
-}

contrib/bochs/serial-console.1

@@ -1,191 +0,0 @@
-.\" Automatically generated by Pod::Man v1.34, Pod::Parser v1.13
-.\"
-.\" Standard preamble:
-.\" ========================================================================
-.de Sh \" Subsection heading
-.br
-.if t .Sp
-.ne 5
-.PP
-\fB\\$1\fR
-.PP
-..
-.de Sp \" Vertical space (when we can't use .PP)
-.if t .sp .5v
-.if n .sp
-..
-.de Vb \" Begin verbatim text
-.ft CW
-.nf
-.ne \\$1
-..
-.de Ve \" End verbatim text
-.ft R
-.fi
-..
-.\" Set up some character translations and predefined strings.  \*(-- will
-.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
-.\" double quote, and \*(R" will give a right double quote.  | will give a
-.\" real vertical bar.  \*(C+ will give a nicer C++.  Capital omega is used to
-.\" do unbreakable dashes and therefore won't be available.  \*(C` and \*(C'
-.\" expand to `' in nroff, nothing in troff, for use with C<>.
-.tr \(*W-|\(bv\*(Tr
-.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
-.ie n \{\
-.    ds -- \(*W-
-.    ds PI pi
-.    if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
-.    if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\"  diablo 12 pitch
-.    ds L" ""
-.    ds R" ""
-.    ds C` ""
-.    ds C' ""
-'br\}
-.el\{\
-.    ds -- \|\(em\|
-.    ds PI \(*p
-.    ds L" ``
-.    ds R" ''
-'br\}
-.\"
-.\" If the F register is turned on, we'll generate index entries on stderr for
-.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index
-.\" entries marked with X<> in POD.  Of course, you'll have to process the
-.\" output yourself in some meaningful fashion.
-.if \nF \{\
-.    de IX
-.    tm Index:\\$1\t\\n%\t"\\$2"
-..
-.    nr % 0
-.    rr F
-.\}
-.\"
-.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
-.\" way too many mistakes in technical documents.
-.hy 0
-.if n .na
-.\"
-.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
-.\" Fear.  Run.  Save yourself.  No user-serviceable parts.
-.    \" fudge factors for nroff and troff
-.if n \{\
-.    ds #H 0
-.    ds #V .8m
-.    ds #F .3m
-.    ds #[ \f1
-.    ds #] \fP
-.\}
-.if t \{\
-.    ds #H ((1u-(\\\\n(.fu%2u))*.13m)
-.    ds #V .6m
-.    ds #F 0
-.    ds #[ \&
-.    ds #] \&
-.\}
-.    \" simple accents for nroff and troff
-.if n \{\
-.    ds ' \&
-.    ds ` \&
-.    ds ^ \&
-.    ds , \&
-.    ds ~ ~
-.    ds /
-.\}
-.if t \{\
-.    ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
-.    ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
-.    ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
-.    ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
-.    ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
-.    ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
-.\}
-.    \" troff and (daisy-wheel) nroff accents
-.ds : \\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
-.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
-.ds o \\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
-.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
-.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
-.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
-.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
-.ds ae a\h'-(\w'a'u*4/10)'e
-.ds Ae A\h'-(\w'A'u*4/10)'E
-.    \" corrections for vroff
-.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
-.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
-.    \" for low resolution devices (crt and lpr)
-.if \n(.H>23 .if \n(.V>19 \
-\{\
-.    ds : e
-.    ds 8 ss
-.    ds o a
-.    ds d- d\h'-1'\(ga
-.    ds D- D\h'-1'\(hy
-.    ds th \o'bp'
-.    ds Th \o'LP'
-.    ds ae ae
-.    ds Ae AE
-.\}
-.rm #[ #] #H #V #F C
-.\" ========================================================================
-.\"
-.IX Title "SERIAL-CONSOLE 1"
-.TH SERIAL-CONSOLE 1 "2004-03-10" "perl v5.8.0" "User Contributed Perl Documentation"
-.SH "NAME"
-serial\-console
-.SH "SYNOPSIS"
-.IX Header "SYNOPSIS"
-serial-console [options]
-.PP
-Options:
-.PP
-.Vb 5
-\&    -h,--help         Display brief help message
-\&    -v,--verbose      Increase verbosity
-\&    -q,--quiet        Decrease verbosity
-\&    -l,--log FILE     Log output to file
-\&    -r,--rcfile FILE  Modify specified bochsrc file
-.Ve
-.SH "DESCRIPTION"
-.IX Header "DESCRIPTION"
-\&\f(CW\*(C`serial\-console\*(C'\fR provides a virtual serial console for use with
-Bochs.  Running \f(CW\*(C`serial\-console\*(C'\fR creates a pseudo\-tty.  The master
-side of this pty is made available to the user for interaction; the
-slave device is written to the Bochs configuration file
-(\f(CW\*(C`bochsrc.txt\*(C'\fR) for use by a subsequent Bochs session.
-.SH "EXAMPLES"
-.IX Header "EXAMPLES"
-.ie n .IP """serial\-console""" 4
-.el .IP "\f(CWserial\-console\fR" 4
-.IX Item "serial-console"
-Create a virtual serial console for Bochs, modify \f(CW\*(C`bochsrc.txt\*(C'\fR
-appropriately.
-.ie n .IP """serial\-console \-r ../.bochsrc \-l serial.log""" 4
-.el .IP "\f(CWserial\-console \-r ../.bochsrc \-l serial.log\fR" 4
-.IX Item "serial-console -r ../.bochsrc -l serial.log"
-Create a virtual serial console for Bochs, modify \f(CW\*(C`../.bochsrc\*(C'\fR
-appropriately, log output to \f(CW\*(C`serial.log\*(C'\fR.
-.SH "INVOCATION"
-.IX Header "INVOCATION"
-Before starting Bochs, run \f(CW\*(C`serial\-console\*(C'\fR in a different session
-(e.g. a different xterm window).  When you subsequently start Bochs,
-anything that the emulated machine writes to its serial port will
-appear in the window running \f(CW\*(C`serial\-console\*(C'\fR, and anything typed in
-the \f(CW\*(C`serial\-console\*(C'\fR window will arrive on the emulated machine's
-serial port.
-.PP
-You do \fBnot\fR need to rerun \f(CW\*(C`serial\-console\*(C'\fR afresh for each Bochs
-session.
-.SH "OPTIONS"
-.IX Header "OPTIONS"
-.IP "\fB\-l,\-\-log \s-1FILE\s0\fR" 4
-.IX Item "-l,--log FILE"
-Log all output (i.e. everything that is printed in the
-\&\f(CW\*(C`serial\-console\*(C'\fR window) to the specified file.
-.IP "\fB\-r,\-\-rcfile \s-1FILE\s0\fR" 4
-.IX Item "-r,--rcfile FILE"
-Modify the specified bochsrc file.  The file will be updated to
-contain the path to the slave side of the psuedo tty that we create.
-The original file will be restored when \f(CW\*(C`serial\-console\*(C'\fR exits.  The
-default is to modify the file \f(CW\*(C`bochsrc.txt\*(C'\fR in the current directory.
-.Sp
-To avoid modifying any bochsrc file, use \f(CW\*(C`\-\-norcfile\*(C'\fR.

contrib/bochs/tunctl.c

@@ -1,113 +0,0 @@
-/* Copyright 2002 Jeff Dike
- * Licensed under the GPL
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <pwd.h>
-#include <net/if.h>
-#include <sys/ioctl.h>
-#include <linux/if_tun.h>
-
-static void Usage(char *name)
-{
-  fprintf(stderr, "Create: %s [-b] [-u owner] [-t device-name] "
-	  "[-f tun-clone-device]\n", name);
-  fprintf(stderr, "Delete: %s -d device-name [-f tun-clone-device]\n\n", 
-	  name);
-  fprintf(stderr, "The default tun clone device is /dev/net/tun - some systems"
-	  " use\n/dev/misc/net/tun instead\n\n");
-  fprintf(stderr, "-b will result in brief output (just the device name)\n");
-  exit(1);
-}
-
-int main(int argc, char **argv)
-{
-  struct ifreq ifr;
-  struct passwd *pw;
-  long owner = geteuid();
-  int tap_fd, opt, delete = 0, brief = 0;
-  char *tun = "", *file = "/dev/net/tun", *name = argv[0], *end;
-
-  while((opt = getopt(argc, argv, "bd:f:t:u:")) > 0){
-    switch(opt) {
-      case 'b':
-        brief = 1;
-        break;
-      case 'd':
-        delete = 1;
-	tun = optarg;
-        break;
-      case 'f':
-	file = optarg;
-	break;
-      case 'u':
-	pw = getpwnam(optarg);
-	if(pw != NULL){
-	  owner = pw->pw_uid;
-	  break;
-	}
-        owner = strtol(optarg, &end, 0);
-	if(*end != '\0'){
-	  fprintf(stderr, "'%s' is neither a username nor a numeric uid.\n",
-		  optarg);
-	  Usage(name);
-	}
-        break;
-      case 't':
-        tun = optarg;
-        break;
-      case 'h':
-      default:
-        Usage(name);
-    }
-  }
-
-  argv += optind;
-  argc -= optind;
-
-  if(argc > 0)
-    Usage(name);
-
-  if((tap_fd = open(file, O_RDWR)) < 0){
-    fprintf(stderr, "Failed to open '%s' : ", file);
-    perror("");
-    exit(1);
-  }
-
-  memset(&ifr, 0, sizeof(ifr));
-
-  ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
-  strncpy(ifr.ifr_name, tun, sizeof(ifr.ifr_name) - 1);
-  if(ioctl(tap_fd, TUNSETIFF, (void *) &ifr) < 0){
-    perror("TUNSETIFF");
-    exit(1);
-  }
-
-  if(delete){
-    if(ioctl(tap_fd, TUNSETPERSIST, 0) < 0){
-      perror("TUNSETPERSIST");
-      exit(1);
-    }    
-    printf("Set '%s' nonpersistent\n", ifr.ifr_name);
-  }
-  else {
-    if(ioctl(tap_fd, TUNSETPERSIST, 1) < 0){
-      perror("TUNSETPERSIST");
-      exit(1);
-    }
-    if(ioctl(tap_fd, TUNSETOWNER, owner) < 0){
-      perror("TUNSETPERSIST");
-      exit(1);
-    } 
-    if(brief)
-      printf("%s\n", ifr.ifr_name);
-    else printf("Set '%s' persistent and owned by uid %ld\n", ifr.ifr_name, 
-		owner);
-  }
-  return(0);
-}

contrib/bootptodhcp/bootptodhcp.pl

@@ -1,42 +0,0 @@
-#!/usr/bin/perl -w
-#
-# Quick hack to convert /etc/bootptab to format required by ISC DHCPD
-# This only outputs the fixed hosts portion of the config file
-# You still have to provide the global options and the subnet scoping
-#
-# Turn $useipaddr on if you prefer to use IP addresses in the config file
-# I run DNS so I prefer domain names
-$useipaddr = 0;
-# This will be appended to get the FQDN unless the hostname is already FQDN
-$domainname = "ken.com.au";
-$tftpdir = "/tftpdir/";
-open(B, "/etc/bootptab") or die "/etc/bootptab: $!\n";
-while(<B>) {
-	if (/^[^a-z]/) {
-		$prevline = $_;
-		next;
-	}
-	chomp($_);
-	($hostname, @tags) = split(/:/, $_, 5);
-	($fqdn = $hostname) .= ".$domainname" unless($hostname =~ /\./);
-	($macaddr) = grep(/^ha=/, @tags);
-	$macaddr =~ s/ha=//;
-	$macaddr =~ s/(..)(..)(..)(..)(..)(..)/$1:$2:$3:$4:$5:$6/g;
-	($ipaddr) = grep(/^ip=/, @tags);
-	$ipaddr =~ s/ip=//;
-	($bootfile) = grep(/^bf=/, @tags);
-	$bootfile =~ s/bf=//;
-	$bootfile = $tftpdir . $bootfile;
-# I have a comment line above most entries and I like to carry this over
-	print $prevline if ($prevline =~ /^#/);
-	$address = $useipaddr ? $ipaddr : $fqdn;
-	print <<EOF
-	host $hostname {
-		hardware ethernet $macaddr;
-		fixed-address $address;
-		filename "$bootfile";
-	}
-EOF
-;
-	$prevline = $_;
-}

contrib/compressor/COPYING

@@ -1,23 +0,0 @@
-The compression code as implemented in "lzhuf.c" was taken from a BBS
-program written by Joachim Schurig <jschurig@zedat.fu-berlin.de>. He
-states that the code can be used freely for programs that are covered
-by a "freeware" license. This probably includes both BSD style
-licenses and the GPL.
-
-The code in "loader.asm" is a reimplementation of the uncompressor. It
-has been written from scratch and is hereby placed under the
-conditions of the GNU General Public License (GPL). The algorithm is
-outlined in "algorithm.doc".
-
-Thus, there are no copyright problems with using this code, but there
-still might be difficulties with software patents. These patents are
-not legal in most parts of the world, but if you live in a country
-that honors software patents then you should verify that using these
-algorithms is legally permitted. Unless you are absolutely sure, that
-there are no legal obstacles, you should use the code for educational
-purposes only (this assumes that your educational institution is
-exempted from patent laws). The author cannot be held responsible for
-using the program code in violation of applicable local laws.
-
-If you are aware of patents that might affect the legality of using
-the code in some parts of the world, please let me know.

contrib/compressor/algorithm.doc

@@ -1,58 +0,0 @@
-The  compressor achieves  an  average compression  rate of 60%  of the
-original size which is on par with "gzip". It seems that you cannot do
-much better for compressing  compiled  binaries.  This means that  the
-break even  point  for using compressed  images is   reached, once the
-uncompressed size approaches 1.5kB. We  can stuff more than 12kB  into
-an 8kB EPROM and more than 25kB into an 16kB EPROM.   As there is only
-32kB of RAM  for both the uncompressed  image  and its BSS  area, this
-means that 32kB EPROMs will hardly ever be required.
-
-The compression  algorithm uses a  4kB  ring buffer  for buffering the
-uncompressed data. Before   compression starts,  the  ring buffer   is
-filled  with spaces (ASCII  character  0x20).  The algorithm tries  to
-find repeated  input sequences of a  maximum length of  60 bytes.  All
-256 different input  bytes  plus the 58 (60   minus a threshold of  2)
-possible  repeat lengths form a set  of 314 symbols. These symbols are
-adaptively Huffman encoded.  The  algorithm starts out with a Huffmann
-tree  that  assigns equal code lengths    to each of  the  314 symbols
-(slightly favoring the repeat  symbols over symbols for regular  input
-characters), but  it will be changed whenever  the frequency of any of
-the symbols  changes. Frequency counts are  kept in 16bit  words until
-the total number of compressed codes totals 2^15.  Then, all frequency
-counts will be halfed (rounding to the bigger number).  For unrepeated
-characters (symbols 0..255) the Huffman code  is written to the output
-stream.  For repeated characters the  Huffmann code, which denotes the
-length of the repeated character sequence, is written out and then the
-index in the ring buffer is computed.   From this index, the algorithm
-computes  the offset   relative to  the current  index  into  the ring
-buffer. Thus,  for typical input data,  one would expect that short to
-medium range offsets are more frequent  than extremely short or medium
-range to long range offsets. Thus the  12bit (for a 4kB buffer) offset
-value  is statically Huffman encoded  using a precomputed Huffman tree
-that favors  those  offset  values    that  are deemed to   be    more
-frequent. The  Huffman encoded offset  is  written to the output  data
-stream,  directly  following the code  that   determines the length of
-repeated characters.
-
-This algorithm, as implemented in the  C example code, looks very good
-and  its operating parameters are   already well optimized. This  also
-explains   why  it achieves     compression ratios    comparable  with
-"gzip". Depending on the input data, it sometimes excells considerably
-beyond what "gzip -9" does, but this  phenomenon does not appear to be
-typical. There are some flaws with  the algorithm, such as the limited
-buffer  sizes, the  adaptive  Huffman tree  which takes  very  long to
-change, if    the input  characters  experience   a sudden   change in
-distribution, and the static Huffman   tree for encoding offsets  into
-the  buffer.   The slow  changes of   the  adaptive  Huffman  tree are
-partially counteracted by  artifically keeping  a 16bit precision  for
-the frequency counts, but  this does not  come into play until 32kB of
-compressed data is output, so  it does not  have any impact on our use
-for "etherboot", because  the BOOT Prom  does not support uncompressed
-data of more then 32kB (c.f. doc/spec.doc).
-
-Nonetheless,  these problems  do  not  seem  to affect  compression of
-compiled  programs very much.  Mixing  object code with English  text,
-would not work too  well though, and  the algorithm should be reset in
-between. Actually, we  might  gain a little  improvement, if  text and
-data   segments    were compressed  individually,    but   I have  not
-experimented with this option, yet.

contrib/compressor/loader.h

@@ -1,14 +0,0 @@
-/* Do not change these values unless you really know what you are doing;
-   the pre-computed lookup tables rely on the buffer size being 4kB or
-   smaller. The buffer size must be a power of two. The lookahead size has
-   to fit into 6 bits. If you change any of these numbers, you will also
-   have to adjust the decompressor accordingly.
- */
-
-#define BUFSZ           4096
-#define LOOKAHEAD       60
-#define THRESHOLD       2
-#define NCHAR           (256+LOOKAHEAD-THRESHOLD)
-#define TABLESZ         (NCHAR+NCHAR-1)
-#define NIL             ((unsigned short)-1)
-

contrib/compressor/lzhuf.c

@@ -1,764 +0,0 @@
-/*
-----------------------------------------------------------------------------
-
-M. LZHuf Compression
-
-This is the LZHuf compression algorithm as used in DPBOX and F6FBB.
-
-----------------------------------------------------------------------------
-*/
-/**************************************************************
-    lzhuf.c
-    written by Haruyasu Yoshizaki 11/20/1988
-    some minor changes 4/6/1989
-    comments translated by Haruhiko Okumura 4/7/1989
-
-    minor beautifications and adjustments for compiling under Linux
-    by Markus Gutschke <gutschk@math.uni-muenster.de>
-    						1997-01-27
-
-    Modifications to allow use as a filter by  Ken Yap <ken_yap@users.sourceforge.net>.
-						1997-07-01
-
-    Small mod to cope with running on big-endian machines
-    by Jim Hague <jim.hague@acm.org)
-						1998-02-06
-
-    Make compression statistics report shorter
-    by Ken Yap <ken_yap@users.sourceforge.net>.
-						2001-04-25
-**************************************************************/
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-
-#ifndef VERBOSE
-#define Fprintf(x)
-#define wterr     0
-#else
-#define Fprintf(x) fprintf x
-#if defined(ENCODE) || defined(DECODE)
-static char wterr[] = "Can't write.";
-#ifdef ENCODE
-static unsigned long int codesize = 0;
-#endif
-static unsigned long int printcount = 0;
-#endif
-#endif
-
-#ifndef MAIN
-extern
-#endif
-FILE  *infile, *outfile;
-
-#if defined(ENCODE) || defined(DECODE)
-static unsigned long int  textsize = 0;
-
-static __inline__ void Error(char *message)
-{
-    Fprintf((stderr, "\n%s\n", message));
-    exit(EXIT_FAILURE);
-}
-
-/* These will be a complete waste of time on a lo-endian */
-/* system, but it only gets done once so WTF. */
-static unsigned long i86ul_to_host(unsigned long ul)
-{
-    unsigned long res = 0;
-    int i;
-    union
-    {
-    	unsigned char c[4];
-	unsigned long ul;
-    } u;
-
-    u.ul = ul;
-    for (i = 3; i >= 0; i--)
-    	res = (res << 8) + u.c[i];
-    return res;
-}
-
-static unsigned long host_to_i86ul(unsigned long ul)
-{
-    int i;
-    union
-    {
-    	unsigned char c[4];
-	unsigned long ul;
-    } u;
-
-    for (i = 0; i < 4; i++)
-    {
-    	u.c[i] = ul & 0xff;
-	ul >>= 8;
-    }
-    return u.ul;
-}
-#endif
-
-/********** LZSS compression **********/
-
-#define N       4096    /* buffer size */
-/* Attention: When using this file for f6fbb-type compressed data exchange,
-   set N to 2048 ! (DL8HBS) */
-#define F       60  /* lookahead buffer size */
-#define THRESHOLD   2
-#define NIL     N   /* leaf of tree */
-
-#if defined(ENCODE) || defined(DECODE)
-static unsigned char
-        text_buf[N + F - 1];
-#endif
-
-#ifdef ENCODE
-static int     match_position, match_length,
-               lson[N + 1], rson[N + 257], dad[N + 1];
-
-static void InitTree(void)  /* initialize trees */
-{
-    int  i;
-
-    for (i = N + 1; i <= N + 256; i++)
-        rson[i] = NIL;          /* root */
-    for (i = 0; i < N; i++)
-        dad[i] = NIL;           /* node */
-}
-
-static void InsertNode(int r)  /* insert to tree */
-{
-    int  i, p, cmp;
-    unsigned char  *key;
-    unsigned c;
-
-    cmp = 1;
-    key = &text_buf[r];
-    p = N + 1 + key[0];
-    rson[r] = lson[r] = NIL;
-    match_length = 0;
-    for ( ; ; ) {
-        if (cmp >= 0) {
-            if (rson[p] != NIL)
-                p = rson[p];
-            else {
-                rson[p] = r;
-                dad[r] = p;
-                return;
-            }
-        } else {
-            if (lson[p] != NIL)
-                p = lson[p];
-            else {
-                lson[p] = r;
-                dad[r] = p;
-                return;
-            }
-        }
-        for (i = 1; i < F; i++)
-            if ((cmp = key[i] - text_buf[p + i]) != 0)
-                break;
-        if (i > THRESHOLD) {
-            if (i > match_length) {
-                match_position = ((r - p) & (N - 1)) - 1;
-                if ((match_length = i) >= F)
-                    break;
-            }
-            if (i == match_length) {
-                if ((c = ((r - p) & (N - 1)) - 1) < match_position) {
-                    match_position = c;
-                }
-            }
-        }
-    }
-    dad[r] = dad[p];
-    lson[r] = lson[p];
-    rson[r] = rson[p];
-    dad[lson[p]] = r;
-    dad[rson[p]] = r;
-    if (rson[dad[p]] == p)
-        rson[dad[p]] = r;
-    else
-        lson[dad[p]] = r;
-    dad[p] = NIL;  /* remove p */
-}
-
-static void DeleteNode(int p)  /* remove from tree */
-{
-    int  q;
-
-    if (dad[p] == NIL)
-        return;         /* not registered */
-    if (rson[p] == NIL)
-        q = lson[p];
-    else
-    if (lson[p] == NIL)
-        q = rson[p];
-    else {
-        q = lson[p];
-        if (rson[q] != NIL) {
-            do {
-                q = rson[q];
-            } while (rson[q] != NIL);
-            rson[dad[q]] = lson[q];
-            dad[lson[q]] = dad[q];
-            lson[q] = lson[p];
-            dad[lson[p]] = q;
-        }
-        rson[q] = rson[p];
-        dad[rson[p]] = q;
-    }
-    dad[q] = dad[p];
-    if (rson[dad[p]] == p)
-        rson[dad[p]] = q;
-    else
-        lson[dad[p]] = q;
-    dad[p] = NIL;
-}
-#endif
-
-/* Huffman coding */
-
-#define N_CHAR      (256 - THRESHOLD + F)
-                /* kinds of characters (character code = 0..N_CHAR-1) */
-#define T       (N_CHAR * 2 - 1)    /* size of table */
-#define R       (T - 1)         /* position of root */
-#define MAX_FREQ    0x8000      /* updates tree when the */
-                    /* root frequency comes to this value. */
-typedef unsigned char uchar;
-
-/* table for encoding and decoding the upper 6 bits of position */
-
-/* for encoding */
-
-#ifdef ENCODE
-static uchar p_len[64] = {
-    0x03, 0x04, 0x04, 0x04, 0x05, 0x05, 0x05, 0x05,
-    0x05, 0x05, 0x05, 0x05, 0x06, 0x06, 0x06, 0x06,
-    0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
-    0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-    0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-    0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-    0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
-    0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08
-};
-
-static uchar p_code[64] = {
-    0x00, 0x20, 0x30, 0x40, 0x50, 0x58, 0x60, 0x68,
-    0x70, 0x78, 0x80, 0x88, 0x90, 0x94, 0x98, 0x9C,
-    0xA0, 0xA4, 0xA8, 0xAC, 0xB0, 0xB4, 0xB8, 0xBC,
-    0xC0, 0xC2, 0xC4, 0xC6, 0xC8, 0xCA, 0xCC, 0xCE,
-    0xD0, 0xD2, 0xD4, 0xD6, 0xD8, 0xDA, 0xDC, 0xDE,
-    0xE0, 0xE2, 0xE4, 0xE6, 0xE8, 0xEA, 0xEC, 0xEE,
-    0xF0, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7,
-    0xF8, 0xF9, 0xFA, 0xFB, 0xFC, 0xFD, 0xFE, 0xFF
-};
-#endif
-
-#ifdef DECODE
-/* for decoding */
-static uchar d_code[256] = {
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-    0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-    0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02,
-    0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02,
-    0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
-    0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
-    0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
-    0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-    0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
-    0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-    0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
-    0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09,
-    0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A,
-    0x0B, 0x0B, 0x0B, 0x0B, 0x0B, 0x0B, 0x0B, 0x0B,
-    0x0C, 0x0C, 0x0C, 0x0C, 0x0D, 0x0D, 0x0D, 0x0D,
-    0x0E, 0x0E, 0x0E, 0x0E, 0x0F, 0x0F, 0x0F, 0x0F,
-    0x10, 0x10, 0x10, 0x10, 0x11, 0x11, 0x11, 0x11,
-    0x12, 0x12, 0x12, 0x12, 0x13, 0x13, 0x13, 0x13,
-    0x14, 0x14, 0x14, 0x14, 0x15, 0x15, 0x15, 0x15,
-    0x16, 0x16, 0x16, 0x16, 0x17, 0x17, 0x17, 0x17,
-    0x18, 0x18, 0x19, 0x19, 0x1A, 0x1A, 0x1B, 0x1B,
-    0x1C, 0x1C, 0x1D, 0x1D, 0x1E, 0x1E, 0x1F, 0x1F,
-    0x20, 0x20, 0x21, 0x21, 0x22, 0x22, 0x23, 0x23,
-    0x24, 0x24, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27,
-    0x28, 0x28, 0x29, 0x29, 0x2A, 0x2A, 0x2B, 0x2B,
-    0x2C, 0x2C, 0x2D, 0x2D, 0x2E, 0x2E, 0x2F, 0x2F,
-    0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
-    0x38, 0x39, 0x3A, 0x3B, 0x3C, 0x3D, 0x3E, 0x3F,
-};
-
-static uchar d_len[256] = {
-    0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
-    0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
-    0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
-    0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
-    0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
-    0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
-    0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
-    0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
-    0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
-    0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04,
-    0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-    0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-    0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-    0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-    0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-    0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-    0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-    0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05,
-    0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
-    0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
-    0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
-    0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
-    0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
-    0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06,
-    0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-    0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-    0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-    0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-    0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-    0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
-    0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
-    0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
-};
-#endif
-
-#if defined(ENCODE) || defined(DECODE)
-static unsigned freq[T + 1];   /* frequency table */
-
-static int prnt[T + N_CHAR];   /* pointers to parent nodes, except for the */
-            /* elements [T..T + N_CHAR - 1] which are used to get */
-            /* the positions of leaves corresponding to the codes. */
-
-static int son[T];     /* pointers to child nodes (son[], son[] + 1) */
-#endif
-
-#ifdef DECODE
-static unsigned getbuf = 0;
-static uchar getlen = 0;
-
-static int GetBit(void)    /* get one bit */
-{
-    int i;
-
-    while (getlen <= 8) {
-        if ((i = getc(infile)) < 0) i = 0;
-        getbuf |= i << (8 - getlen);
-        getlen += 8;
-    }
-    i = getbuf;
-    getbuf <<= 1;
-    getlen--;
-    return ((signed short)i < 0);
-}
-
-static int GetByte(void)   /* get one byte */
-{
-    unsigned short i;
-
-    while (getlen <= 8) {
-        if ((signed short)(i = getc(infile)) < 0) i = 0;
-        getbuf |= i << (8 - getlen);
-        getlen += 8;
-    }
-    i = getbuf;
-    getbuf <<= 8;
-    getlen -= 8;
-    return i >> 8;
-}
-#endif
-
-#ifdef ENCODE
-static unsigned putbuf = 0;
-static uchar putlen = 0;
-
-static void Putcode(int l, unsigned c)     /* output c bits of code */
-{
-    putbuf |= c >> putlen;
-    if ((putlen += l) >= 8) {
-        if (putc(putbuf >> 8, outfile) == EOF) {
-            Error(wterr);
-        }
-        if ((putlen -= 8) >= 8) {
-            if (putc(putbuf, outfile) == EOF) {
-                Error(wterr);
-            }
-#ifdef VERBOSE
-            codesize += 2;
-#endif
-            putlen -= 8;
-            putbuf = c << (l - putlen);
-        } else {
-	  putbuf <<= 8;
-#ifdef VERBOSE
-	  codesize++;
-#endif
-        }
-    }
-}
-#endif
-
-/* initialization of tree */
-
-#if defined(ENCODE) || defined(DECODE)
-static void StartHuff(void)
-{
-    int i, j;
-
-    for (i = 0; i < N_CHAR; i++) {
-        freq[i] = 1;
-        son[i] = i + T;
-        prnt[i + T] = i;
-    }
-    i = 0; j = N_CHAR;
-    while (j <= R) {
-        freq[j] = freq[i] + freq[i + 1];
-        son[j] = i;
-        prnt[i] = prnt[i + 1] = j;
-        i += 2; j++;
-    }
-    freq[T] = 0xffff;
-    prnt[R] = 0;
-}
-
-/* reconstruction of tree */
-
-static void reconst(void)
-{
-    int i, j, k;
-    unsigned f, l;
-
-    /* collect leaf nodes in the first half of the table */
-    /* and replace the freq by (freq + 1) / 2. */
-    j = 0;
-    for (i = 0; i < T; i++) {
-        if (son[i] >= T) {
-            freq[j] = (freq[i] + 1) / 2;
-            son[j] = son[i];
-            j++;
-        }
-    }
-    /* begin constructing tree by connecting sons */
-    for (i = 0, j = N_CHAR; j < T; i += 2, j++) {
-        k = i + 1;
-        f = freq[j] = freq[i] + freq[k];
-        for (k = j - 1; f < freq[k]; k--);
-        k++;
-        l = (j - k) * 2;
-        memmove(&freq[k + 1], &freq[k], l);
-        freq[k] = f;
-        memmove(&son[k + 1], &son[k], l);
-        son[k] = i;
-    }
-    /* connect prnt */
-    for (i = 0; i < T; i++) {
-        if ((k = son[i]) >= T) {
-            prnt[k] = i;
-        } else {
-            prnt[k] = prnt[k + 1] = i;
-        }
-    }
-}
-
-/* increment frequency of given code by one, and update tree */
-
-static void update(int c)
-{
-    int i, j, k, l;
-
-    if (freq[R] == MAX_FREQ) {
-        reconst();
-    }
-    c = prnt[c + T];
-    do {
-        k = ++freq[c];
-
-        /* if the order is disturbed, exchange nodes */
-        if (k > freq[l = c + 1]) {
-            while (k > freq[++l]);
-            l--;
-            freq[c] = freq[l];
-            freq[l] = k;
-
-            i = son[c];
-            prnt[i] = l;
-            if (i < T) prnt[i + 1] = l;
-
-            j = son[l];
-            son[l] = i;
-
-            prnt[j] = c;
-            if (j < T) prnt[j + 1] = c;
-            son[c] = j;
-
-            c = l;
-        }
-    } while ((c = prnt[c]) != 0);   /* repeat up to root */
-}
-#endif
-
-#ifdef ENCODE
-#if 0
-static unsigned code, len;
-#endif
-
-static void EncodeChar(unsigned c)
-{
-    unsigned i;
-    int j, k;
-
-    i = 0;
-    j = 0;
-    k = prnt[c + T];
-
-    /* travel from leaf to root */
-    do {
-        i >>= 1;
-
-        /* if node's address is odd-numbered, choose bigger brother node */
-        if (k & 1) i += 0x8000;
-
-        j++;
-    } while ((k = prnt[k]) != R);
-    Putcode(j, i);
-#if 0
-    code = i;
-    len = j;
-#endif
-    update(c);
-}
-
-static void EncodePosition(unsigned c)
-{
-    unsigned i;
-
-    /* output upper 6 bits by table lookup */
-    i = c >> 6;
-    Putcode(p_len[i], (unsigned)p_code[i] << 8);
-
-    /* output lower 6 bits verbatim */
-    Putcode(6, (c & 0x3f) << 10);
-}
-
-static void EncodeEnd(void)
-{
-    if (putlen) {
-        if (putc(putbuf >> 8, outfile) == EOF) {
-            Error(wterr);
-        }
-#ifdef VERBOSE
-        codesize++;
-#endif
-    }
-}
-#endif
-
-#ifdef DECODE
-static int DecodeChar(void)
-{
-    unsigned c;
-
-    c = son[R];
-
-    /* travel from root to leaf, */
-    /* choosing the smaller child node (son[]) if the read bit is 0, */
-    /* the bigger (son[]+1} if 1 */
-    while (c < T) {
-        c += GetBit();
-        c = son[c];
-    }
-    c -= T;
-    update(c);
-    return c;
-}
-
-static int DecodePosition(void)
-{
-    unsigned i, j, c;
-
-    /* recover upper 6 bits from table */
-    i = GetByte();
-    c = (unsigned)d_code[i] << 6;
-    j = d_len[i];
-
-    /* read lower 6 bits verbatim */
-    j -= 2;
-    while (j--) {
-        i = (i << 1) + GetBit();
-    }
-    return c | (i & 0x3f);
-}
-#endif
-
-#ifdef ENCODE
-/* compression */
-
-void Encode(void)  /* compression */
-{
-    int  i, c, len, r, s, last_match_length;
-    unsigned long tw;
-
-    fseek(infile, 0L, 2);
-    textsize = ftell(infile);
-#ifdef VERBOSE
-    if ((signed long)textsize < 0)
-      Fprintf((stderr, "Errno: %d", errno));
-#endif
-    tw = host_to_i86ul(textsize);
-    if (fwrite(&tw, sizeof tw, 1, outfile) < 1)
-        Error(wterr);   /* output size of text */
-    if (textsize == 0)
-        return;
-    rewind(infile);
-    textsize = 0;           /* rewind and re-read */
-    StartHuff();
-    InitTree();
-    s = 0;
-    r = N - F;
-    for (i = s; i < r; i++)
-        text_buf[i] = ' ';
-    for (len = 0; len < F && (c = getc(infile)) != EOF; len++)
-        text_buf[r + len] = c;
-    textsize = len;
-    for (i = 1; i <= F; i++)
-        InsertNode(r - i);
-    InsertNode(r);
-    do {
-        if (match_length > len)
-            match_length = len;
-        if (match_length <= THRESHOLD) {
-            match_length = 1;
-            EncodeChar(text_buf[r]);
-        } else {
-            EncodeChar(255 - THRESHOLD + match_length);
-            EncodePosition(match_position);
-        }
-        last_match_length = match_length;
-        for (i = 0; i < last_match_length &&
-                (c = getc(infile)) != EOF; i++) {
-            DeleteNode(s);
-            text_buf[s] = c;
-            if (s < F - 1)
-                text_buf[s + N] = c;
-            s = (s + 1) & (N - 1);
-            r = (r + 1) & (N - 1);
-            InsertNode(r);
-        }
-        if ((textsize += i) > printcount) {
-#if defined(VERBOSE) && defined(EXTRAVERBOSE)
-            Fprintf((stderr, "%12ld\r", textsize));
-#endif
-            printcount += 1024;
-        }
-        while (i++ < last_match_length) {
-            DeleteNode(s);
-            s = (s + 1) & (N - 1);
-            r = (r + 1) & (N - 1);
-            if (--len) InsertNode(r);
-        }
-    } while (len > 0);
-    EncodeEnd();
-#ifdef	LONG_REPORT
-    Fprintf((stderr, "input size    %ld bytes\n", codesize));
-    Fprintf((stderr, "output size   %ld bytes\n", textsize));
-    Fprintf((stderr, "input/output  %.3f\n", (double)codesize / textsize));
-#else
-    Fprintf((stderr, "input/output = %ld/%ld = %.3f\n", codesize, textsize,
-		(double)codesize / textsize));
-#endif
-}
-#endif
-
-#ifdef DECODE
-void Decode(void)  /* recover */
-{
-    int  i, j, k, r, c;
-    unsigned long int  count;
-    unsigned long tw;
-
-    if (fread(&tw, sizeof tw, 1, infile) < 1)
-        Error("Can't read");  /* read size of text */
-    textsize = i86ul_to_host(tw);
-    if (textsize == 0)
-        return;
-    StartHuff();
-    for (i = 0; i < N - F; i++)
-        text_buf[i] = ' ';
-    r = N - F;
-    for (count = 0; count < textsize; ) {
-        c = DecodeChar();
-        if (c < 256) {
-            if (putc(c, outfile) == EOF) {
-                Error(wterr);
-            }
-            text_buf[r++] = c;
-            r &= (N - 1);
-            count++;
-        } else {
-            i = (r - DecodePosition() - 1) & (N - 1);
-            j = c - 255 + THRESHOLD;
-            for (k = 0; k < j; k++) {
-                c = text_buf[(i + k) & (N - 1)];
-                if (putc(c, outfile) == EOF) {
-                    Error(wterr);
-                }
-                text_buf[r++] = c;
-                r &= (N - 1);
-                count++;
-            }
-        }
-        if (count > printcount) {
-#if defined(VERBOSE) && defined(EXTRAVERBOSE)
-            Fprintf((stderr, "%12ld\r", count));
-#endif
-            printcount += 1024;
-        }
-    }
-    Fprintf((stderr, "%12ld\n", count));
-}
-#endif
-
-#ifdef MAIN
-int main(int argc, char *argv[])
-{
-    char  *s;
-    FILE  *f;
-    int    c;
-
-    if (argc == 2) {
-	outfile = stdout;
-	if ((f = tmpfile()) == NULL) {
-	    perror("tmpfile");
-	    return EXIT_FAILURE;
-	}
-	while ((c = getchar()) != EOF)
-	    fputc(c, f);
-	rewind(infile = f);
-    }
-    else if (argc != 4) {
-        Fprintf((stderr, "'lzhuf e file1 file2' encodes file1 into file2.\n"
-                "'lzhuf d file2 file1' decodes file2 into file1.\n"));
-        return EXIT_FAILURE;
-    }
-    if (argc == 4) {
-	if ((s = argv[1], s[1] || strpbrk(s, "DEde") == NULL)
-	  || (s = argv[2], (infile  = fopen(s, "rb")) == NULL)
-	  || (s = argv[3], (outfile = fopen(s, "wb")) == NULL)) {
-	    Fprintf((stderr, "??? %s\n", s));
-	    return EXIT_FAILURE;
-	}
-    }
-    if (toupper(*argv[1]) == 'E')
-        Encode();
-    else
-        Decode();
-    fclose(infile);
-    fclose(outfile);
-    return EXIT_SUCCESS;
-}
-#endif

contrib/dhcpdconfeg/dhcpd.conf

@@ -1,16 +0,0 @@
-This is an example of using vendor tags in DHCPD config, supplied by
-Bernd Wiebelt.
-
-
-subnet 10.97.0.0 netmask 255.255.0.0 {
-	range 10.97.0.2 10.97.0.254;
-	option option-128  e4:45:74:68:0:0;
-	option option-160 "default=193";
-	option option-184  "HALLO";
-       	option option-192 "Linux:::linux.tagged:";
-	option option-193 "DOS Bootdisk:::dosboot.tagged";
-	option option-194 "RH61 Bootdisk:::boot.tagged";
-	option option-195 "Local Disk:::/dev/hda:85b103482a20682da703aa388933a6d8";
-}
-
-

contrib/dhcpdconfeg/vendorclassid.txt

@@ -1,140 +0,0 @@
-From: Dax Kelson
-To: Etherboot users list
-Subject: [Etherboot-users] Example ISC DHCP v3 dhcpd.conf using conditional operations
-Date: Wed, 13 Jun 2001 20:22:21 -0600
-
-Hopefully someone will find this useful.  I spent a long time tracking
-down and figuring out all the pieces.  To the powers that be, feel free to
-stick this in contrib if you like it.
-
-Goal:  Use the vendor-class-identifier and ISC DHCP v3 "match" option to
-conditionally send proper options only when the DHCP discover/request from
-etherboot comes in.  We use static-MAC-to-IP mappings for classroom
-computers, and dynamic dhcp ranges for other clients (student laptops,
-etc).
-
-I used Etherboot 5.0.1 and the patch (required) in this email:
-
-http://www.geocrawler.com/lists/3/SourceForge/5299/0/5952625/
-
-Furture versions of Etherboot will likely already have this patch
-included.
-
-Dax Kelson
-Guru Labs
-
-######### Begin ISC DHCP v3 dhcpd.conf #############
-
-ddns-update-style ad-hoc;
-
-# Global default, can be overridden
-filename "/exports/kickstart/class1-rh7.1.ks";
-
-# Define options for Etherboot
-# There are more, these are just the ones I'm using
-option ebootmagic code 128 = string;
-option cmdline code 129 = string;
-option menudflts code 160 = string;
-option menuline1 code 192 = string;
-option menuline2 code 193 = string;
-option menuline3 code 194 = string;
-option menuline4 code 195 = string;
-option menuline5 code 196 = string;
-option menuline6 code 197 = string;
-option menuline7 code 198 = string;
-option menuline8 code 199 = string;
-option menuline9 code 200 = string;
-option menuline10 code 201 = string;
-option menuline11 code 202 = string;
-option menuline12 code 203 = string;
-option menuline13 code 204 = string;
-option menuline14 code 205 = string;
-option menuline15 code 206 = string;
-option menuline16 code 207 = string;
-option motdline1 code 184 = string;
-
-class "Etherboot" {
-    match if substring (option vendor-class-identifier, 0, 9) = "Etherboot";
-
-        option ebootmagic  = E4:45:74:68:00:00;
-
-# We don't use this here, because different menu items require
-# different cmdlines.  In our ".nbi" files we specify the cmdlines
-
-#        option cmdline  = "ks initrd=initrd.img lang= devfs=nomount";
-
-        option motdline1  = "Welcome to Guru Labs classroom";
-
-        option menudflts  = "timeout=30:default=192";
-
-        option menuline1  = "Boot from Hard Drive (Default):::/dev/hda:::";
-        option menuline2  = "Boot from Floppy:::/dev/fd0:::";
-        option menuline3  = "Boot from CDROM::::::";
-        option menuline4  = "Kickstart install Red Hat 7.1:::rh71-ks-etherboot.nbi:::";
-        option menuline5  = "Red Hat 7.1 network rescue:::rh71-rescue-etherboot.nbi:::";
-        option menuline6  = "Boot Win98SE startup floppy:::win98se-startupdisk.nbi:::";
-        option menuline7  = "Jumpstart install Solaris 8 (not working yet):::/dev/hda:::";
-        option menuline8  = "Install Windows 98 SE (not working yet):::/dev/hda:::";
-        option menuline9  = "Install Windows 2000 (not working yet):::/dev/hda:::";
-        option menuline10  = "Install FreeBSD 4.3 (not working yet):::/dev/hda:::";
-        option menuline11  = "Install OpenBSD 2.9 (not working yet):::/dev/hda:::";
-
-	# This is a hidden menu item, it should be password protected too
-        option menuline12  = "^[[3D^[[K^[[1A^M:::/dev/hda:::";
-
-# We are using the menu, with different bootfiles.  So we don't use this.
-# If you weren't using a menu, you could use this override the global
-# default "filename" setting.
-
-#        filename "rh71-ks-etherboot";
-
-# Use the following if etherboot compiled with -DREQUIRE_VCI_ETHERBOOT
-
-        option vendor-encapsulated-options 3c:09:45:74:68:65:72:62:6f:6f:74:ff;
-
-}
-
-subnet 10.100.0.0 netmask 255.255.255.0 {
-        authoritative;
-        option routers                  10.100.0.254;
-        option subnet-mask              255.255.255.0;
-        option domain-name              "example.com";
-        option domain-name-servers      10.100.0.254;
-        option time-offset              -7; # US/Mountain
-        option ntp-servers              10.100.0.254;
-        range dynamic-bootp 10.100.0.175 10.100.0.250;
-        default-lease-time 21600;
-        max-lease-time 43200;
-        option netbios-name-servers     10.100.0.254;
-        option netbios-node-type 2;
-        use-host-decl-names on;
-        next-server server1.example.com;
-
-}
-
-host station1 {
-        hardware ethernet 00:01:03:de:57:e2;
-        fixed-address 10.100.0.1;
-}
-host station2 {
-        hardware ethernet 00:01:03:de:57:e7;
-        fixed-address 10.100.0.2;
-}
-host station3 {
-        hardware ethernet 00:01:03:de:57:b4;
-        fixed-address 10.100.0.3;
-}
-host station4 {
-        hardware ethernet 00:01:03:de:57:38;
-        fixed-address 10.100.0.4;
-}
-host station5 {
-        hardware ethernet 00:01:03:de:58:3d;
-        fixed-address 10.100.0.5;
-}
-
-#
-# Etc, etc
-#
-
-############## End ISC DHCP v3 dhcpd.conf #############

contrib/dhcpid/dhcpid.txt

@@ -1,884 +0,0 @@
-From daniel@insu.com Thu Apr 27 14:14:55 2000
-Sender: root@iNsu.COM
-Message-ID: <39075669.FAEB20F2@insu.com>
-Date: Wed, 26 Apr 2000 16:49:45 -0400
-From: Daniel Shane <daniel@insu.com>
-X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686)
-X-Accept-Language: en
-MIME-Version: 1.0
-Subject: Re: New feature added to etherboot
-References: <20000425170804.6677127D8A@Goffman.iNsu.COM>
-Content-Type: multipart/mixed;
- boundary="------------4734FDA0BF2F2FBDF8EB8DF6"
-
-This is a multi-part message in MIME format.
---------------4734FDA0BF2F2FBDF8EB8DF6
-Content-Type: text/plain; charset=us-ascii
-Content-Transfer-Encoding: 7bit
-
-Ok, here is a diff for etherboot 4.6.0 that adds identifiers.
-
-To test this you need to use a class in the dhcpd.conf file and
-also send back a string in option 208.
-
-These identifiers prevent a client from booting from other DHCP
-servers when you have more than 1 in your network.
-
-In will also prevent any client, except the valid ones, to use this
-DHCP server.
-
-Here is a subset of my dhcpd.conf :
-
-option iNdiskless-state code 208 = text;
-
-class "iNdiskless-boot" {
-    match if substring(option iNdiskless-state,0,4) = "BOOT";
-}
-class "iNdiskless-setup" {
-    match if substring(option iNdiskless-state,0,5) = "SETUP";
-}           
-
-subnet 10.4.1.0 netmask 255.255.255.0 {
-pool {
-  allow members of "iNdiskless-boot";
-  deny unknown clients;
-  range 10.4.1.2 10.4.1.200;
-  next-server 10.4.1.1;
-
-# Identify ourselves to the etherboot/DHCP client
-  option iNdiskless-state       "BOOT"; 
-
-  host labo01 {
-       hardware ethernet 00:80:c8:ec:04:1b;
-     }
-  host labo02 {
-       hardware ethernet 00:4f:4c:04:45:d6;
-     }
-  host labo03 {
-       hardware ethernet 00:50:ba:c8:db:d6;
-  }
-}
-pool {
-  allow members of "iNdiskless-setup";
-  range 10.4.1.201 10.4.1.254;
-  option iNdiskless-state       "SETUP";
-
-# send another kernel to setup the diskless workstation
-  }
-}    
-
-Daniel Shane.
---------------4734FDA0BF2F2FBDF8EB8DF6
-Content-Type: text/plain; charset=us-ascii;
- name="main.c.diff"
-Content-Transfer-Encoding: 7bit
-Content-Disposition: inline;
- filename="main.c.diff"
-
---- etherboot-4.6.0/src/main.c	Tue Apr 25 08:30:01 2000
-+++ etherboot-4.5.6-new/src/main.c	Wed Apr 26 16:17:09 2000
-@@ -42,6 +42,23 @@ char	*motd[RFC1533_VENDOR_NUMOFMOTD];
- #ifdef	IMAGE_FREEBSD
- int freebsd_howto = 0;
- #endif
-+
-+#ifdef SERVER_IDENT 
-+#ifdef DEFAULT_SERVER_IDENT
-+char server_ident[9] = DEFAULT_SERVER_IDENT;
-+#else
-+char server_ident[9] = {};
-+#endif   
-+#endif
-+
-+#ifdef CLIENT_IDENT 
-+#ifdef DEFAULT_CLIENT_IDENT
-+char client_ident[9] = DEFAULT_CLIENT_IDENT;
-+#else
-+char client_ident[9] = {};
-+#endif
-+#endif
-+
- int     vendorext_isvalid;
- char	config_buffer[TFTP_MAX_PACKET+1];	/* +1 for null byte */
- unsigned long	netmask;
-@@ -63,61 +80,85 @@ char    rfc1533_cookie[5] = { RFC1533_CO
- char    rfc1533_cookie[] = { RFC1533_COOKIE};
- char    rfc1533_end[]={RFC1533_END };
- static const char dhcpdiscover[]={
--		RFC2132_MSG_TYPE,1,DHCPDISCOVER,
--		RFC2132_MAX_SIZE,2,2,64,
--		RFC2132_PARAM_LIST,4,RFC1533_NETMASK,RFC1533_GATEWAY,
--		RFC1533_HOSTNAME,RFC1533_EXTENSIONPATH
--	};
--static const char dhcprequest []={
--		RFC2132_MSG_TYPE,1,DHCPREQUEST,
--		RFC2132_SRV_ID,4,0,0,0,0,
--		RFC2132_REQ_ADDR,4,0,0,0,0,
--		RFC2132_MAX_SIZE,2,2,64,
--		/* request parameters */
--		RFC2132_PARAM_LIST,
--#ifdef	IMAGE_FREEBSD
--		/* 4 standard + 4 vendortags + 8 motd + 16 menu items */
--		4 + 4 + 8 + 16,
-+	RFC2132_MSG_TYPE,1,DHCPDISCOVER,
-+	RFC2132_MAX_SIZE,2,2,64,
-+#ifdef CLIENT_IDENT 
-+	RFC1533_VENDOR_CLIENT_IDENT,8,0,0,0,0,0,0,0,0,
-+#endif
-+	RFC2132_PARAM_LIST,
-+#ifdef SERVER_IDENT 
-+	5,
- #else
--		/* 4 standard + 3 vendortags + 8 motd + 16 menu items */
--		4 + 3 + 8 + 16,
-+	4,
- #endif
--		/* Standard parameters */
--		RFC1533_NETMASK, RFC1533_GATEWAY,
--		RFC1533_HOSTNAME, RFC1533_EXTENSIONPATH,
--		/* Etherboot vendortags */
--		RFC1533_VENDOR_MAGIC,
-+#ifdef SERVER_IDENT 
-+	RFC1533_VENDOR_SERVER_IDENT,   
-+#endif
-+	RFC1533_NETMASK,
-+	RFC1533_GATEWAY,
-+	RFC1533_HOSTNAME,
-+	RFC1533_EXTENSIONPATH
-+};
-+static const char dhcprequest []={
-+	RFC2132_MSG_TYPE,1,DHCPREQUEST,
-+	RFC2132_SRV_ID,4,0,0,0,0,
-+	RFC2132_REQ_ADDR,4,0,0,0,0,
-+#ifdef CLIENT_IDENT 
-+	RFC1533_VENDOR_CLIENT_IDENT,8,0,0,0,0,0,0,0,0,
-+#endif
-+	RFC2132_MAX_SIZE,2,2,64,
-+	/* request parameters */
-+	RFC2132_PARAM_LIST,
-+	/* 4 standard + 3 vendortags + 8 motd + 16 menu items */
-+	4 + 
-+	3 + 
-+#ifdef  IMAGE_FREEBSD
-+	1 + /* One more vendortags for VENDOR_HOWTO */
-+#endif
-+#ifdef SERVER_IDENT 
-+	1 + /* One more vendortags for VENDOR_SERVER_IDENT */
-+#endif
-+	8 + 
-+	16,
-+	/* Standard parameters */
-+	RFC1533_NETMASK, RFC1533_GATEWAY,
-+	RFC1533_HOSTNAME, RFC1533_EXTENSIONPATH,
-+	/* Etherboot vendortags */
-+	RFC1533_VENDOR_MAGIC,
- #ifdef	IMAGE_FREEBSD
--		RFC1533_VENDOR_HOWTO,
-+	RFC1533_VENDOR_HOWTO,
- #endif
--		RFC1533_VENDOR_MNUOPTS, RFC1533_VENDOR_SELECTION,
--		/* 8 MOTD entries */
--		RFC1533_VENDOR_MOTD,
--		RFC1533_VENDOR_MOTD+1,
--		RFC1533_VENDOR_MOTD+2,
--		RFC1533_VENDOR_MOTD+3,
--		RFC1533_VENDOR_MOTD+4,
--		RFC1533_VENDOR_MOTD+5,
--		RFC1533_VENDOR_MOTD+6,
--		RFC1533_VENDOR_MOTD+7,
--		/* 16 image entries */
--		RFC1533_VENDOR_IMG,
--		RFC1533_VENDOR_IMG+1,
--		RFC1533_VENDOR_IMG+2,
--		RFC1533_VENDOR_IMG+3,
--		RFC1533_VENDOR_IMG+4,
--		RFC1533_VENDOR_IMG+5,
--		RFC1533_VENDOR_IMG+6,
--		RFC1533_VENDOR_IMG+7,
--		RFC1533_VENDOR_IMG+8,
--		RFC1533_VENDOR_IMG+9,
--		RFC1533_VENDOR_IMG+10,
--		RFC1533_VENDOR_IMG+11,
--		RFC1533_VENDOR_IMG+12,
--		RFC1533_VENDOR_IMG+13,
--		RFC1533_VENDOR_IMG+14,
--		RFC1533_VENDOR_IMG+15,
--	};
-+#ifdef SERVER_IDENT
-+	RFC1533_VENDOR_SERVER_IDENT,
-+#endif
-+	RFC1533_VENDOR_MNUOPTS, RFC1533_VENDOR_SELECTION,
-+	/* 8 MOTD entries */
-+	RFC1533_VENDOR_MOTD,
-+	RFC1533_VENDOR_MOTD+1,
-+	RFC1533_VENDOR_MOTD+2,
-+	RFC1533_VENDOR_MOTD+3,
-+	RFC1533_VENDOR_MOTD+4,
-+	RFC1533_VENDOR_MOTD+5,
-+	RFC1533_VENDOR_MOTD+6,
-+	RFC1533_VENDOR_MOTD+7,
-+	/* 16 image entries */
-+	RFC1533_VENDOR_IMG,
-+	RFC1533_VENDOR_IMG+1,
-+	RFC1533_VENDOR_IMG+2,
-+	RFC1533_VENDOR_IMG+3,
-+	RFC1533_VENDOR_IMG+4,
-+	RFC1533_VENDOR_IMG+5,
-+	RFC1533_VENDOR_IMG+6,
-+	RFC1533_VENDOR_IMG+7,
-+	RFC1533_VENDOR_IMG+8,
-+	RFC1533_VENDOR_IMG+9,
-+	RFC1533_VENDOR_IMG+10,
-+	RFC1533_VENDOR_IMG+11,
-+	RFC1533_VENDOR_IMG+12,
-+	RFC1533_VENDOR_IMG+13,
-+	RFC1533_VENDOR_IMG+14,
-+	RFC1533_VENDOR_IMG+15,
-+};
- 
- #endif	/* NO_DHCP_SUPPORT */
- static const char broadcast[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
-@@ -176,6 +217,55 @@ done:
- 			break;
- 	}
- #endif
-+
-+#ifdef SHIFTED_IDENT_INPUT
-+	if (getshift() & 3)
-+		{
-+#endif
-+	
-+#ifdef  CLIENT_IDENT
-+#   ifdef ASK_CLIENT_IDENT
-+			{
-+				char tmp_ident[9] = {};
-+#      ifdef  DEFAULT_CLIENT_IDENT
-+				printf("Enter the client identifier (8 char max.) default [%s] : ",client_ident);
-+#      else
-+				printf("Enter the client identifier (8 char max.) : ");
-+#      endif
-+				getstr(tmp_ident,8);
-+				if (strlen(tmp_ident) != 0)
-+					memcpy(client_ident,tmp_ident,8);
-+				else
-+					printf("%s",client_ident);
-+				putchar('\n');
-+			}
-+#   endif
-+#endif
-+
-+#ifdef  SERVER_IDENT
-+#   ifdef ASK_SERVER_IDENT
-+			{
-+				char tmp_ident[9] = {};
-+#      ifdef  DEFAULT_SERVER_IDENT
-+				printf("Enter the server identifier (8 char max.) default [%s] : ",server_ident);
-+#      else
-+				printf("Enter the server identifier (8 char max.) : ");
-+#      endif
-+				getstr(tmp_ident,8);
-+				if (strlen(tmp_ident) != 0)
-+					memcpy(server_ident,tmp_ident,8);
-+				else
-+					printf("%s",server_ident);
-+				putchar('\n');
-+			}
-+#   endif
-+#endif
-+
-+#ifdef SHIFTED_IDENT_INPUT
-+		}
-+#endif
-+
-+	print_config();
- #if	(TRY_FLOPPY_FIRST > 0) && defined(FLOPPY)
- 	disk_init();
- 	printf("Trying floppy");
-@@ -188,7 +278,7 @@ done:
- 	}
- 	printf("no floppy\n");
- #endif	/* TRY_FLOPPY_FIRST && FLOPPY */
--	print_config();
-+        print_config();
- 	gateA20_set();
- #ifdef	EMERGENCYDISKBOOT
- 	if (!eth_probe()) {
-@@ -663,6 +753,8 @@ BOOTP - Get my IP address and load infor
- int bootp()
- {
- 	int retry;
-+        int offset = 0;
-+
- #ifndef	NO_DHCP_SUPPORT
- 	int retry1;
- #endif	/* NO_DHCP_SUPPORT */
-@@ -680,11 +772,18 @@ int bootp()
- 	bp.bp_xid = xid = starttime = currticks();
- 	memcpy(bp.bp_hwaddr, arptable[ARP_CLIENT].node, ETHER_ADDR_SIZE);
- #ifdef	NO_DHCP_SUPPORT
--	memcpy(bp.bp_vend, rfc1533_cookie, 5); /* request RFC-style options */
-+	memcpy(bp.bp_vend+offset, rfc1533_cookie, 5); /* request RFC-style options */
-+	offset += sizeof rfc1533_cookie;
- #else
--	memcpy(bp.bp_vend, rfc1533_cookie, sizeof rfc1533_cookie); /* request RFC-style options */
--	memcpy(bp.bp_vend+sizeof rfc1533_cookie, dhcpdiscover, sizeof dhcpdiscover);
--	memcpy(bp.bp_vend+sizeof rfc1533_cookie +sizeof dhcpdiscover, rfc1533_end, sizeof rfc1533_end);
-+	memcpy(bp.bp_vend+offset, rfc1533_cookie, sizeof rfc1533_cookie); /* request RFC-style options */
-+	offset += sizeof rfc1533_cookie; 	
-+	memcpy(bp.bp_vend+offset, dhcpdiscover, sizeof dhcpdiscover);
-+	offset += sizeof dhcpdiscover;
-+#ifdef CLIENT_IDENT 
-+	memcpy(bp.bp_vend+13, client_ident, strlen(client_ident));
-+#endif
-+	memcpy(bp.bp_vend+offset, rfc1533_end, sizeof rfc1533_end);
-+	offset += sizeof rfc1533_end;
- #endif	/* NO_DHCP_SUPPORT */
- 
- 	for (retry = 0; retry < MAX_BOOTP_RETRIES; ) {
-@@ -715,19 +814,22 @@ int bootp()
- #else
- 		if (await_reply(AWAIT_BOOTP, 0, NULL, TIMEOUT)){
- 			if (dhcp_reply==DHCPOFFER){
--		dhcp_reply=0;
--		memcpy(bp.bp_vend, rfc1533_cookie, sizeof rfc1533_cookie);
--		memcpy(bp.bp_vend+sizeof rfc1533_cookie, dhcprequest, sizeof dhcprequest);
--		memcpy(bp.bp_vend+sizeof rfc1533_cookie +sizeof dhcprequest, rfc1533_end, sizeof rfc1533_end);
--		memcpy(bp.bp_vend+9, &dhcp_server, sizeof(in_addr));
--		memcpy(bp.bp_vend+15, &dhcp_addr, sizeof(in_addr));
--			for (retry1 = 0; retry1 < MAX_BOOTP_RETRIES;) {
--			udp_transmit(IP_BROADCAST, 0, BOOTP_SERVER,
--				sizeof(struct bootp_t), &bp);
- 				dhcp_reply=0;
--				if (await_reply(AWAIT_BOOTP, 0, NULL, TIMEOUT))
--					if (dhcp_reply==DHCPACK)
--						return(1);
-+				memcpy(bp.bp_vend, rfc1533_cookie, sizeof rfc1533_cookie);
-+				memcpy(bp.bp_vend+sizeof rfc1533_cookie, dhcprequest, sizeof dhcprequest);
-+				memcpy(bp.bp_vend+sizeof rfc1533_cookie +sizeof dhcprequest, rfc1533_end, sizeof rfc1533_end);
-+				memcpy(bp.bp_vend+9, &dhcp_server, sizeof(in_addr));
-+				memcpy(bp.bp_vend+15, &dhcp_addr, sizeof(in_addr));
-+#ifdef CLIENT_IDENT
-+				memcpy(bp.bp_vend+21, client_ident, strlen(client_ident));
-+#endif
-+				for (retry1 = 0; retry1 < MAX_BOOTP_RETRIES;) {
-+					udp_transmit(IP_BROADCAST, 0, BOOTP_SERVER,
-+						     sizeof(struct bootp_t), &bp);
-+					dhcp_reply=0;
-+					if (await_reply(AWAIT_BOOTP, 0, NULL, TIMEOUT))
-+						if (dhcp_reply==DHCPACK)
-+							return(1);
- 					rfc951_sleep(++retry1);
- 				}
- 			} else
-@@ -750,6 +852,7 @@ AWAIT_REPLY - Wait until we get a respon
- **************************************************************************/
- int await_reply(int type, int ival, void *ptr, int timeout)
- {
-+	int result;
- 	unsigned long time;
- 	struct	iphdr *ip;
- 	struct	udphdr *udp;
-@@ -757,6 +860,7 @@ int await_reply(int type, int ival, void
- 	struct	bootp_t *bootpreply;
- 	struct	rpc_t *rpc;
- 	unsigned short ptype;
-+	unsigned int min_packetlen;
- 
- 	unsigned int protohdrlen = ETHER_HDR_SIZE + sizeof(struct iphdr) +
- 				sizeof(struct udphdr);
-@@ -766,35 +870,35 @@ int await_reply(int type, int ival, void
- 	 * needs a negligible amount of time.  */
- 	for (;;) {
- 		if (eth_poll()) {	/* We have something! */
--					/* Check for ARP - No IP hdr */
-+			/* Check for ARP - No IP hdr */
- 			if (nic.packetlen >= ETHER_HDR_SIZE) {
- 				ptype = ((unsigned short) nic.packet[12]) << 8
- 					| ((unsigned short) nic.packet[13]);
- 			} else continue; /* what else could we do with it? */
- 			if ((nic.packetlen >= ETHER_HDR_SIZE +
--				sizeof(struct arprequest)) &&
--			   (ptype == ARP) ) {
-+			     sizeof(struct arprequest)) &&
-+			    (ptype == ARP) ) {
- 				unsigned long tmp;
--
-+				
- 				arpreply = (struct arprequest *)
- 					&nic.packet[ETHER_HDR_SIZE];
- 				if ((arpreply->opcode == ntohs(ARP_REPLY)) &&
--				   !memcmp(arpreply->sipaddr, ptr, sizeof(in_addr)) &&
--				   (type == AWAIT_ARP)) {
-+				    !memcmp(arpreply->sipaddr, ptr, sizeof(in_addr)) &&
-+				    (type == AWAIT_ARP)) {
- 					memcpy(arptable[ival].node, arpreply->shwaddr, ETHER_ADDR_SIZE);
- 					return(1);
- 				}
- 				memcpy(&tmp, arpreply->tipaddr, sizeof(in_addr));
- 				if ((arpreply->opcode == ntohs(ARP_REQUEST)) &&
--					(tmp == arptable[ARP_CLIENT].ipaddr.s_addr)) {
-+				    (tmp == arptable[ARP_CLIENT].ipaddr.s_addr)) {
- 					arpreply->opcode = htons(ARP_REPLY);
- 					memcpy(arpreply->tipaddr, arpreply->sipaddr, sizeof(in_addr));
- 					memcpy(arpreply->thwaddr, arpreply->shwaddr, ETHER_ADDR_SIZE);
- 					memcpy(arpreply->sipaddr, &arptable[ARP_CLIENT].ipaddr, sizeof(in_addr));
- 					memcpy(arpreply->shwaddr, arptable[ARP_CLIENT].node, ETHER_ADDR_SIZE);
- 					eth_transmit(arpreply->thwaddr, ARP,
--						sizeof(struct  arprequest),
--						arpreply);
-+						     sizeof(struct  arprequest),
-+						     arpreply);
- #ifdef	MDEBUG
- 					memcpy(&tmp, arpreply->tipaddr, sizeof(in_addr));
- 					printf("Sent ARP reply to: %I\n",tmp);
-@@ -802,20 +906,20 @@ int await_reply(int type, int ival, void
- 				}
- 				continue;
- 			}
--
-+			
- 			if (type == AWAIT_QDRAIN) {
- 				continue;
- 			}
--
--					/* Check for RARP - No IP hdr */
-+			
-+			/* Check for RARP - No IP hdr */
- 			if ((type == AWAIT_RARP) &&
--			   (nic.packetlen >= ETHER_HDR_SIZE +
--				sizeof(struct arprequest)) &&
--			   (ptype == RARP)) {
-+			    (nic.packetlen >= ETHER_HDR_SIZE +
-+			     sizeof(struct arprequest)) &&
-+			    (ptype == RARP)) {
- 				arpreply = (struct arprequest *)
- 					&nic.packet[ETHER_HDR_SIZE];
- 				if ((arpreply->opcode == ntohs(RARP_REPLY)) &&
--				   !memcmp(arpreply->thwaddr, ptr, ETHER_ADDR_SIZE)) {
-+				    !memcmp(arpreply->thwaddr, ptr, ETHER_ADDR_SIZE)) {
- 					memcpy(arptable[ARP_SERVER].node, arpreply->shwaddr, ETHER_ADDR_SIZE);
- 					memcpy(& arptable[ARP_SERVER].ipaddr, arpreply->sipaddr, sizeof(in_addr));
- 					memcpy(& arptable[ARP_CLIENT].ipaddr, arpreply->tipaddr, sizeof(in_addr));
-@@ -823,64 +927,72 @@ int await_reply(int type, int ival, void
- 				}
- 				continue;
- 			}
--
--					/* Anything else has IP header */
-+			
-+			/* Anything else has IP header */
- 			if ((nic.packetlen < protohdrlen) ||
--			   (ptype != IP) ) continue;
-+			    (ptype != IP) ) continue;
- 			ip = (struct iphdr *)&nic.packet[ETHER_HDR_SIZE];
- 			if ((ip->verhdrlen != 0x45) ||
--				ipchksum((unsigned short *)ip, sizeof(struct iphdr)) ||
--				(ip->protocol != IP_UDP)) continue;
-+			    ipchksum((unsigned short *)ip, sizeof(struct iphdr)) ||
-+			    (ip->protocol != IP_UDP)) continue;
- 			udp = (struct udphdr *)&nic.packet[ETHER_HDR_SIZE +
--				sizeof(struct iphdr)];
--
--					/* BOOTP ? */
-+							  sizeof(struct iphdr)];
-+			
-+			/* BOOTP ? */
- 			bootpreply = (struct bootp_t *)&nic.packet[ETHER_HDR_SIZE];
--			if ((type == AWAIT_BOOTP) &&
--			   (nic.packetlen >= (ETHER_HDR_SIZE +
--#ifdef	NO_DHCP_SUPPORT
--			     sizeof(struct bootp_t))) &&
-+#ifdef  NO_DHCP_SUPPORT
-+			min_packetlen = ETHER_HDR_SIZE + sizeof(struct bootp_t);
- #else
--			     sizeof(struct bootp_t))-DHCP_OPT_LEN) &&
--#endif	/* NO_DHCP_SUPPORT */
--			   (ntohs(udp->dest) == BOOTP_CLIENT) &&
--			   (bootpreply->bp_op == BOOTP_REPLY) &&
--			   (bootpreply->bp_xid == xid)) {
--				arptable[ARP_CLIENT].ipaddr.s_addr =
--					bootpreply->bp_yiaddr.s_addr;
-+			min_packetlen = ETHER_HDR_SIZE + sizeof(struct bootp_t) - DHCP_OPT_LEN;
-+#endif
-+			if (
-+			    (type == AWAIT_BOOTP) &&
-+			    (nic.packetlen >= min_packetlen) &&
-+			    (ntohs(udp->dest) == BOOTP_CLIENT) &&
-+			    (bootpreply->bp_op == BOOTP_REPLY) &&
-+			    (bootpreply->bp_xid == xid)
-+			    ) {
-+				arptable[ARP_CLIENT].ipaddr.s_addr = bootpreply->bp_yiaddr.s_addr;
- #ifndef	NO_DHCP_SUPPORT
- 				dhcp_addr.s_addr = bootpreply->bp_yiaddr.s_addr;
- #endif	/* NO_DHCP_SUPPORT */
- 				netmask = default_netmask();
--				arptable[ARP_SERVER].ipaddr.s_addr =
--					bootpreply->bp_siaddr.s_addr;
-+				arptable[ARP_SERVER].ipaddr.s_addr = bootpreply->bp_siaddr.s_addr;
- 				memset(arptable[ARP_SERVER].node, 0, ETHER_ADDR_SIZE);  /* Kill arp */
--				arptable[ARP_GATEWAY].ipaddr.s_addr =
--					bootpreply->bp_giaddr.s_addr;
-+				arptable[ARP_GATEWAY].ipaddr.s_addr = bootpreply->bp_giaddr.s_addr;
- 				memset(arptable[ARP_GATEWAY].node, 0, ETHER_ADDR_SIZE);  /* Kill arp */
- 				if (bootpreply->bp_file[0]) {
- 					memcpy(kernel_buf, bootpreply->bp_file, 128);
- 					kernel = kernel_buf;
- 				}
- 				memcpy((char *)BOOTP_DATA_ADDR, (char *)bootpreply, sizeof(struct bootpd_t));
--				decode_rfc1533(BOOTP_DATA_ADDR->bootp_reply.bp_vend,
--#ifdef	NO_DHCP_SUPPORT
--					       0, BOOTP_VENDOR_LEN +
--					       MAX_BOOTP_EXTLEN, 1);
--#else
--					       0, DHCP_OPT_LEN, 1);
--#endif	/* NO_DHCP_SUPPORT */
--				return(1);
-+#ifdef  NO_DHCP_SUPPORT
-+				if (decode_rfc1533(BOOTP_DATA_ADDR->bootp_reply.bp_vend,
-+						   0, BOOTP_VENDOR_LEN +
-+						   MAX_BOOTP_EXTLEN, 1)) {
-+					return(1);
-+				}
-+				else {
-+					continue;
-+				}
-+#else	
-+				if (decode_rfc1533(BOOTP_DATA_ADDR->bootp_reply.bp_vend,
-+						   0, DHCP_OPT_LEN, 1)) {
-+					return(1);
-+				}
-+				else {
-+					continue;
-+				}
- 			}
--
-+#endif	/* NO_DHCP_SUPPORT */
- #ifdef	DOWNLOAD_PROTO_TFTP
--					/* TFTP ? */
-+			/* TFTP ? */
- 			if ((type == AWAIT_TFTP) &&
--				(ntohs(udp->dest) == ival)) return(1);
-+			    (ntohs(udp->dest) == ival)) return(1);
- #endif	/* DOWNLOAD_PROTO_TFTP */
--
-+			
- #ifdef	DOWNLOAD_PROTO_NFS
--					/* RPC ? */
-+			/* RPC ? */
- 			rpc = (struct rpc_t *)&nic.packet[ETHER_HDR_SIZE];
- 			if ((type == AWAIT_RPC) &&
- 			    (ntohs(udp->dest) == ival) &&
-@@ -889,19 +1001,19 @@ int await_reply(int type, int ival, void
- 				return (1);
- 			}
- #endif	/* DOWNLOAD_PROTO_NFS */
--
-+			
- 		} else {
--			/* Check for abort key only if the Rx queue is empty -
--			 * as long as we have something to process, don't
--			 * assume that something failed.  It is unlikely that
--			 * we have no processing time left between packets.  */
-+				/* Check for abort key only if the Rx queue is empty -
-+				 * as long as we have something to process, don't
-+				 * assume that something failed.  It is unlikely that
-+				 * we have no processing time left between packets.  */
- 			if (iskey() && (getchar() == ESC))
- #ifdef	EMERGENCYDISKBOOT
- 				exit(0);
- #else
--				longjmp(jmp_bootmenu,1);
-+			longjmp(jmp_bootmenu,1);
- #endif
--			/* Do the timeout after at least a full queue walk.  */
-+				/* Do the timeout after at least a full queue walk.  */
- 			if ((timeout == 0) || (currticks() > time)) {
- 				break;
- 			}
-@@ -914,13 +1026,15 @@ int await_reply(int type, int ival, void
- DECODE_RFC1533 - Decodes RFC1533 header
- **************************************************************************/
- int decode_rfc1533(p, block, len, eof)
--	register unsigned char *p;
--	int block, len, eof;
-+        register unsigned char *p;
-+        int block, len, eof;  
- {
- 	static unsigned char *extdata = NULL, *extend = NULL;
- 	unsigned char        *extpath = NULL;
- 	unsigned char        *endp;
--
-+#ifdef SERVER_IDENT
-+	char rcvd_server_ident[9] = {};
-+#endif
- 	if (block == 0) {
- #ifdef	IMAGE_MENU
- 		memset(imagelist, 0, sizeof(imagelist));
-@@ -1002,11 +1116,16 @@ int decode_rfc1533(p, block, len, eof)
- 			}
- #endif
- #ifdef	MOTD
--			else if (c >= RFC1533_VENDOR_MOTD &&
-+                        else if (c >= RFC1533_VENDOR_MOTD &&
- 				 c < RFC1533_VENDOR_MOTD +
- 				 RFC1533_VENDOR_NUMOFMOTD)
- 				motd[c - RFC1533_VENDOR_MOTD] = p;
- #endif
-+#ifdef SERVER_IDENT 
-+			else if (c == RFC1533_VENDOR_SERVER_IDENT) {
-+				memcpy(rcvd_server_ident,p+2,TAG_LEN(p));
-+			}
-+#endif
- 			else {
- #if	0
- 				unsigned char *q;
-@@ -1018,6 +1137,30 @@ int decode_rfc1533(p, block, len, eof)
- 			}
- 			p += TAG_LEN(p) + 2;
- 		}
-+#if defined(SERVER_IDENT) && defined(DBG_IDENT)
-+		if (strcasecmp(rcvd_server_ident,server_ident)) {
-+			char ip[16];
-+
-+			inet_ntoa(dhcp_server,ip);
-+			printf("[%s]: Option %d (%s), invalid response. Wanted (%s).\n",
-+			       ip,
-+			       RFC1533_VENDOR_SERVER_IDENT,
-+			       rcvd_server_ident,
-+			       server_ident);
-+			strcpy(rcvd_server_ident,"");
-+			return(0);
-+		}
-+	        else {
-+			char ip[16];
-+
-+			inet_ntoa(dhcp_server,ip);
-+			printf("[%s]: Option %d (%s), valid response.\n",
-+			       ip,
-+			       RFC1533_VENDOR_SERVER_IDENT,
-+			       rcvd_server_ident);
-+			strcpy(rcvd_server_ident,"");
-+		}
-+#endif
- 		extdata = extend = endp;
- 		if (block == 0 && extpath != NULL) {
- 			char fname[64];
-@@ -1103,3 +1246,4 @@ void cleanup(void)
-  *  c-basic-offset: 8
-  * End:
-  */
-+
-
---------------4734FDA0BF2F2FBDF8EB8DF6
-Content-Type: text/plain; charset=us-ascii;
- name="misc.c.diff"
-Content-Transfer-Encoding: 7bit
-Content-Disposition: inline;
- filename="misc.c.diff"
-
---- etherboot-4.6.0/src/misc.c	Tue Apr 25 08:30:25 2000
-+++ etherboot-4.5.6-new/src/misc.c	Wed Apr 26 16:26:38 2000
-@@ -140,9 +140,11 @@ void printf(const char *fmt, ...)
- 
- #ifdef	IMAGE_MENU
- /**************************************************************************
--INET_ATON - Convert an ascii x.x.x.x to binary form
-+INET_NTOA - Convert an ascii x.x.x.x to binary form
- **************************************************************************/
--int inet_aton(char *p, in_addr *i)
-+int inet_aton(p, i)
-+	char *p;
-+	in_addr *i;
- {
- 	unsigned long ip = 0;
- 	int val;
-@@ -165,7 +167,19 @@ int inet_aton(char *p, in_addr *i)
- 
- #endif	/* IMAGE_MENU */
- 
--int getdec(char **ptr)
-+#if  defined(CLIENT_IDENT) || defined (SERVER_IDENT)
-+/**************************************************************************
-+INET_NTOA - Convert a binary form to an ascii x.x.x.x form
-+**************************************************************************/
-+char *inet_ntoa(in_addr i, char *p)
-+{
-+	sprintf(p,"%d.%d.%d.%d",i.s_addr>>24,i.s_addr<<8>>24,i.s_addr<<16>>24,i.s_addr<<24>>24);
-+	return p;
-+}
-+#endif
-+
-+int getdec(ptr)
-+	char **ptr;
- {
- 	char *p = *ptr;
- 	int ret=0;
-@@ -308,6 +322,45 @@ iskey(void)
- 	return 0;
- }
- #endif	/* ETHERBOOT32 */
-+
-+/**************************************************************************
-+GETSTR - Read a string of size bytes from the keyboard 
-+(without echoing the final return)
-+**************************************************************************/
-+void getstr(char *s, int size)
-+{
-+   int i=0;
-+   char c;
-+
-+   while(1) {
-+      c = getc();
-+	  
-+			    
-+      if (c == 13)
-+         {
-+	   s[i]='\0';
-+	   break;
-+         }
-+      else if ( 
-+		((c >= 'a') && (c <='z')) ||  
-+		((c >= 'A') && (c <='Z')) ||
-+		((c >= '0') && (c <='9'))
-+	      ) {
-+                 if (i==8) {
-+                     putchar(8);
-+                     putchar(s[i-1]=c);
-+                  }
-+                  else
-+                     putchar(s[i++]=c);      
-+                }
-+     else if ( c == 8 ) {   
-+	   if (i != 0) {
-+		   --i;
-+		   s[i]='\0';
-+		   putchar(8);
-+		   putchar(32);
-+		   putchar(8);
-+	   }
-+     }
-+   }
-+}
- 
- /*
-  * Local variables:
-
---------------4734FDA0BF2F2FBDF8EB8DF6
-Content-Type: text/plain; charset=us-ascii;
- name="Config.diff"
-Content-Transfer-Encoding: 7bit
-Content-Disposition: inline;
- filename="Config.diff"
-
---- etherboot-4.6.0/src/Config	Tue Apr 25 08:30:57 2000
-+++ etherboot-4.5.6-new/src/Config	Wed Apr 26 15:55:57 2000
-@@ -59,6 +59,27 @@
- #			  may no longer be appropriate.  You might need to set
- #			  MAX_ARP_RETRIES, MAX_BOOTP_RETRIES, MAX_TFTP_RETRIES
- #			  and MAX_RPC_RETRIES to a larger value.
-+#	-DDEFAULT_CLIENT_IDENT
-+#			  The default client identifier that is sent to the
-+#			  DHCP server to identify itself. 
-+#	-DDEFAULT_SERVER_IDENT
-+#			  The expected response that the client will wait
-+#			  for when a DHCP server responds to the the initial
-+#			  client discovery.
-+#	-DASK_CLIENT_IDENT
-+#	-DASK_SERVER_IDENT
-+#			  If these are set, the boot process will include
-+#			  a question period where you can manualy specify
-+#			  the client and/or server identifiers.
-+#	-DSHIFTED_IDENT_INPUT
-+#			  If this is set then the boot process will only
-+#			  ask for the identifiers if one of the shift keys
-+#			  is pressed. Else it will send the default identifiers
-+#			  automatically
-+#	-DDBG_IDENT
-+#			  This will give show all the DHCP responses with
-+#			  their identifiers.
-+#			  
- #
- # Etherboot/32 only options:
- #	-DAOUT_IMAGE	- Add a.out kernel boot support (generic)
-@@ -147,6 +168,14 @@ CFLAGS32+=	-DASK_BOOT=3 -DANS_DEFAULT=AN
- 
- # Change download protocol to NFS.  Only available for Etherboot/32 for now.
- # CFLAGS32+=	-DDOWNLOAD_PROTO_NFS
-+
-+# If you have more than one DHCP server you might want to
-+# enable these to be able to sort out which one you want to
-+# respond to.  
-+CFLAGS32+= -DDEFAULT_CLIENT_IDENT=\"BOOT\" -DDEFAULT_SERVER_IDENT=\"BOOT\"
-+CFLAGS32+= -DASK_CLIENT_IDENT -DASK_SERVER_IDENT
-+CFLAGS32+= -DSHIFTED_IDENT_INPUT
-+CFLAGS32+= -DDBG_IDENT 
- 
- # These flags affect the loader that is prepended to the Etherboot image
- LCONFIG+=	-DMOVEROM
-
---------------4734FDA0BF2F2FBDF8EB8DF6
-Content-Type: text/plain; charset=us-ascii;
- name="etherboot.h.diff"
-Content-Transfer-Encoding: 7bit
-Content-Disposition: inline;
- filename="etherboot.h.diff"
-
---- etherboot-4.6.0/src/etherboot.h	Tue Apr 25 08:30:55 2000
-+++ etherboot-4.5.6-new/src/etherboot.h	Wed Apr 26 16:07:16 2000
-@@ -8,6 +8,14 @@ Author: Martin Renters
- 
- #include "osdep.h"
- 
-+#if (! defined(NO_DHCP_SUPPORT)) && (defined(ASK_CLIENT_IDENT) || defined(DEFAULT_CLIENT_IDENT))
-+#   define CLIENT_IDENT
-+#endif
-+
-+#if (! defined(NO_DHCP_SUPPORT)) && (defined(ASK_SERVER_IDENT) || defined(DEFAULT_SERVER_IDENT))
-+#   define SERVER_IDENT
-+#endif
-+
- /* These could be customised for different languages perhaps */
- #define	ASK_PROMPT	"Boot from (N)etwork or from (L)ocal? "
- #define	ANS_NETWORK	'N'
-@@ -224,6 +232,12 @@ Author: Martin Renters
- #ifdef	IMAGE_FREEBSD
- #define RFC1533_VENDOR_HOWTO    132
- #endif
-+#ifdef CLIENT_IDENT
-+#define RFC1533_VENDOR_CLIENT_IDENT    208
-+#endif
-+#ifdef SERVER_IDENT
-+#define RFC1533_VENDOR_SERVER_IDENT    208
-+#endif
- #define RFC1533_VENDOR_MNUOPTS	160
- #define RFC1533_VENDOR_SELECTION 176
- #define RFC1533_VENDOR_MOTD	184
-@@ -477,11 +491,13 @@ extern int getdec P((char **));
- extern void printf P((const char *, ...));
- extern char *sprintf P((char *, const char *, ...));
- extern int inet_aton P((char *p, in_addr *i));
-+extern char *inet_ntoa P((in_addr i, char *p));
- extern void gateA20_set P((void));
- extern void gateA20_unset P((void));
- extern void putchar P((int));
- extern int getchar P((void));
- extern int iskey P((void));
-+extern void getstr P((char *s, int size));
- 
- /* start*.S */
- extern int getc P((void));
-@@ -528,8 +544,10 @@ extern int hostnamelen;
- extern unsigned long netmask;
- extern int jmp_bootmenu[10];
- extern struct arptable_t arptable[MAX_ARP];
--#ifdef	IMAGE_MENU
-+#ifdef MOTD
- extern char *motd[RFC1533_VENDOR_NUMOFMOTD];
-+#endif
-+#ifdef	IMAGE_MENU
- extern int menutmo,menudefault;
- extern unsigned char *defparams;
- extern int defparams_max;
-
---------------4734FDA0BF2F2FBDF8EB8DF6--
-

contrib/eepro100notes/flash-1.txt

@@ -1,73 +0,0 @@
-Date: Tue, 18 May 1999 15:45:55 +0200 (MEST)
-From: Erik Starback <erik@math.uu.se>
-To: netboot@baghira.han.de
-Subject: Netboot with Intel EEPRO100+ Management
-Message-ID: <Pine.LNX.3.96.990518154313.3875A-100000@anarchy.math.uu.se>
-MIME-Version: 1.0
-Content-Type: TEXT/PLAIN; charset=iso-8859-1
-Content-Transfer-Encoding: 8BIT
-Sender: owner-netboot@baghira.han.de
-Precedence: bulk
-Reply-To: netboot@baghira.han.de
-X-Moderator: netboot-owner@baghira.han.de
-X-UIDL: 6ca8453c19c46d622813e9be8ada9517
-Status: O
-X-Status: 
-
-Hello!
-
-When Intel eepro100+ NIC disappeared from the market, I didn't know
-what to do. I didn't find any information if anyone has used the
-new eepro100+ Management Adapter to netboot linux. 
-
-I thought that the card should netboot with the same configuration as
-the old card when I read Donald Beckers comment:
-> The driver should "just work" with the '559. It's not supposed to be
-> substantially different than the '558. (I don't have a datasheet
-> or sample card to confirm this statement.)
-
-The problem was now only to put the netboot-program to the built in
-flash memory on the NIC. With the old card I used a flash memory (Intel
-N28F020 [N28010 didn't work])) and the program FUTIL.EXE from Intel to
-flash it. FUTIL did't recognize the memory on the management card
-and did not work therefore.
-
-I found the intel program FBOOT.EXE that was made to upgrade the built
-in Intel BOOT agent. I did: Boot dos from floppy, Run FBOOT (choose
-adapter), choose (u)pdate, choose Create restore image, rename the
-backup file (in my case 2743BE52.FLS [the eight last hex digits from
-the MAC address]), rename your netboot code (in my case netboot 0.8.1)
-to the backup files original name (in my case 2743BE52.FLS), run
-FBOOT, choose (r)estore.
-
-Voila!
-
-A shorter way (if you don't need the backup of the old Intel BOOT
-agent code) is of course: rename netboot file to [the eight last hex
-digits from the MAC address].FLS, run FBOOT, choose restore.
- 
-Caution: I think it is possible to make a NIC unusable if you have
-made the netboot (or etherboot) file with "wrong" parameters. A couple
-of month ago I did a etherboot boot file and put it on an old
-EEPRO100+ card. It worked fine, but it was impossible to boot local
-with it. So I could not boot dos and with FUTIL or FBOOT erase the
-flash memory!  To erase the chip I had to take out the memory chip,
-boot dos and then put in the memory chip. This isn't possible when the
-memory chip is build in.
-
-Links:
-<http://support.intel.com/support/landesk/configmgr/LSA1_193.HTM>
-FUTIL.EXE  is a part of LSA1_193.ZIP
-
-<http://support.intel.com/support/etherexpress/pro100/100pboot.htm>
-FBOOT.EXE is a part of 100pboot.exe
-
-/Erik S
-
--------------------------------------------------------------------------
-Erik Starbäck, System administrator    E-mail address:    erik@math.uu.se
-Uppsala University                     Telephone (o):     +46 18 4713277
-Department of Mathematics              Cellular phone:    +46 70 4250260
-P. O. Box 480                          Fax (o):           +46 18 4713201
-SE-751 06  UPPSALA                  
-Sweden                                

contrib/eepro100notes/flash-2.txt

@@ -1,149 +0,0 @@
-Subject: Look Mom, no PROM burner! (eepro100b flashing instructions) :-)
-Date: Sun, 23 Jan 2000 01:53:08 -0500
-x-sender: mdc%thinguin.org@cdi.entity.com
-x-mailer: Claris Emailer 2.0v3, January 22, 1998
-From: Marty Connor <mdc@thinguin.org>
-To: "Netboot List" <netboot@baghira.han.de>
-Mime-Version: 1.0
-Content-Type: text/plain; charset="US-ASCII"
-Message-ID: <1263512144-341319205@entity.com>
-
-Continuing the Etherboot World Domination theme, I noticed that there was 
-a PCI ethernet card on my bookshelf that still contained the original 
-vendor's code in its flash memory.  The card virtually cried out to be 
-flashed with Etherboot 4.4.1. :-)
-
-After having figured out how to flash the 3C905C last week, and owing to 
-the fact that the temperature here in Cambridge, Massachusetts (USA) has 
-dropped well below freezing, I decided to explore the possibility of 
-flashing the Intel eepro100b that was sitting on my bookcase.
-
-After determining that it was unlikely that one could flash the chip in 
-user mode under linux like the 3C509C,  I turned to other options.  (the 
-reason is that the flash is memory mapped to a place that causes a core 
-dump if accessed.  i suppose one could to patch the kernel to flash the 
-card, or add a linux device driver, but... :-)  
-
-By the way, If you are ever looking for Linux utilities for Ethernet 
-cards, you may want to check out: 
-
-   http://cesdis.gsfc.nasa.gov/linux/diag/
-
-which is a treasure trove of tools for manipulating and testing Ethernet 
-cards, all with source, courtesy of Donald Becker.
-
-At this point, I felt it was time to make a virtual trip to the Intel 
-site (http://www.intel.com/), and search for utilities that might work 
-with the eepro100B.  I found two candidates:  FUTIL and FBOOT.  I 
-downloaded, decompressed, and transferred them to a DOS formatted floppy. 
-Next I determined (after a few tries) that F8 will let me get to DOS 
-instead of booting windows. (I tend to avoid Windows when I can).
-
-I first tried FUTIL.EXE.  No good.  It told me it didn't recognize the 
-flash on my eepro100B.  how unfortunate.  and I had such hopes :-)
-
-Next I tested FBOOT.EXE  (available at 
-http://support.intel.com/support/network/adapter/pro100/100PBOOT.htm)  
-This program did in fact recognize my eepro100b card.
-
-The thing about FBOOT however, is that it thinks it only can load certain 
-files.  I of course needed to load an Etherboot image.  It appeared to 
-have no option for doing that.  Things looked grim.
-
-Then I noticed that FBOOT was kind enough to do the following dialog:
-
-   Select Option (U)pdate or (R)estore: U
-
-I chose Update and it then offered to back up my flash rom for later 
-restore:
-
-   Create Restore Image (Y)es or (N)o: Y
-
-I chose "Y" and it proceeded to write a file of my flash memory, which 
-contained the Intel code.
-
-   Writing FLASH image to file... 100%
-
-It then erased the device:
-
-   Erasing FLASH Device... 100%
-
-and then programmed it with fresh code (stored inside the program, no 
-doubt):
-
-   Programming FLASH Device... 100%
-
-So now I had a backup of the Intel boot code in a file strangely called:
-
-   2794FC60.FLS
-
-Hmmmm, interesting name.  The MAC address of the card is 09902794FC60.  
-They just name the file with the last 4 octets of the MAC address and 
-.FLS.  The file is exactly 65536 bytes, which would make sense for a 64K 
-Flash Memory device.
-
-Then I got to thinking, I wonder how carefully the "restore" part of 
-FBOOT looks at what it is loading?  What if I took an Etherboot .rom 
-file, padded it with 48K of 0xFFs and named it 2794FC60.FLS.  What if I 
-then told FBOOT.EXE to "restore" that?
-
-Well, I guess by now, you know it worked :-) 
-
-The card came up with the delightful Etherboot banner, Did DHCP, tftp, 
-and started a kernel.
-
-The only unfortunate part is that you need to do this under DOS because 
-you seem to need to be in real mode to program the card.  Oh well, 
-sacrifices have to be made :-)
-
-So, in summary, to prepare Etherboot image for flashing into the Intel 
-EEPRO100B card with FBOOT, you need to first make an eepro100.rom file, 
-as usual.
-
-Then, see how large it is, with an "ls -l eepro100.rom". the answer will 
-probably be 16,384.  You need to pad it with hex FFs to make it 64K for 
-FBOOT.  I used the following two lines to create the flash image file.
-
-   $ perl -e 'print "\xFF" x 49152' > 48kpad.bin
-   $ cat eepro100.rom 48kpad.bin > 2794FC60.FLS
-
-Next write it to a DOS Floppy:
-
-   $ mount -t msdos /dev/fd0 /mnt/floppy
-   $ cp 2794FC60.FLS /mnt/floppy
-   $ umount /mnt/floppy
-
-Now you need to get to DOS.  You could actually use a bootable DOS floppy 
-with FBOOT.EXE and 2794FC60.FLS on it.  I started a Windows box and hit 
-F8 right before Windows started, and chose option 5, "Command Prompt 
-Only", which gives you DOS.  This program can't run in a DOS window under 
-Windows or anything like that.  You need to be in real DOS.
-
-Next it's time to run FBOOT.  It will detect your ethernet card(s), ask 
-you which one you want to program, and let you choose it from a menu.
-
-now the fun part:
-
-   Select Option (U)pdate or (R)estore: R
-   Erasing FLASH Device... 100%
-   Writing FLASH image from file... 100%
-
-Time to reboot and let Etherboot take over.
-
-So there you go, a way to make Intel EEPRO100Bs play nicely with 
-Etherboot.  Maybe we should put these instructions in the Etherboot 
-contrib directory so people who have eepro100b cards will be able to 
-avoid 3C905C envy :-)
-
-I hope this helps a few people out.
-
-Regards,
-
-Marty
-
----
-   Name: Martin D. Connor
-US Mail: Entity Cyber, Inc.; P.O. Box 391827; Cambridge, MA 02139; USA
-  Voice: (617) 491-6935, Fax: (617) 491-7046 
-  Email: mdc@thinguin.org
-    Web: http://www.thinguin.org/

contrib/eepro100notes/flash-3.txt

@@ -1,57 +0,0 @@
-Date: Sun, 23 Jan 2000 09:47:15 +0100 (MET)
-From: Erik Starbäck <erik@math.uu.se>
-To: Netboot List <netboot@baghira.han.de>
-Subject: Re: Look Mom, no PROM burner! (eepro100b flashing instructions) :-)
-In-Reply-To: <1263512144-341319205@entity.com>
-Message-ID: <Pine.LNX.3.96.1000123094505.28562A-100000@anarchy.math.uu.se>
-MIME-Version: 1.0
-Content-Type: TEXT/PLAIN; charset=iso-8859-1
-Content-Transfer-Encoding: 8BIT
-Sender: owner-netboot@baghira.han.de
-Precedence: bulk
-Reply-To: netboot@baghira.han.de
-X-Moderator: netboot-owner@baghira.han.de
-
-
-Hello!
-
-In <http://www.han.de/~gero/netboot/archive/msg01718.html> I wrote what I
-did know about futil and fboot then. It is about the same as Martys
-instructions, but I have a few comments now.
-
-> Then, see how large it is, with an "ls -l eepro100.rom". the answer will 
-> probably be 16,384.  You need to pad it with hex FFs to make it 64K for 
-> FBOOT.  I used the following two lines to create the flash image file.
-
->   $ perl -e 'print "\xFF" x 49152' > 48kpad.bin
->   $ cat eepro100.rom 48kpad.bin > 2794FC60.FLS
-
-It worked for me without any padding. When I burned a smaller image
-the program printed 50% instead of 100% and then it
-stopped. Everything worked anyway.
-
-
-I also did a brutal way of install etherboot or netboot on a
-EEPRO100+Mng without creating a file of type "2794FC60.FLS" for
-every card. It was necessary for me when I installed 70 clients...
-
-I chopped the binary file fboot.exe (my version was 99811 bytes, I
-don't remember the version name) in three parts:
-
-fboot1 30096 bytes
-fboot2 65536 bytes
-fboot3 4179  bytes
-
-Then you cat put them together again, but with a different part 2 and
-save it as fbootown.exe and execute it. It worked for me anyway. Of
-course you have to use padding to get a 64k part instead of fboot2.
-
-/Erik S
-
--------------------------------------------------------------------------
-Erik Starbäck, System administrator    E-mail address:    erik@math.uu.se
-Uppsala University                     Telephone (o):     +46 18 4713277
-Department of Mathematics              Cellular phone:    +46 70 4250260
-P. O. Box 480                          Fax (o):           +46 18 4713201
-SE-751 06  UPPSALA                  
-Sweden                                

contrib/flashimg/Makefile

@@ -1,29 +0,0 @@
-CPPFLAGS	= -x assembler-with-cpp
-AS86		= as86
-LD86		= ld86
-OBJDUMP		= objdump
-
-.SUFFIXES:	.s86 .asm .aout .img
-
-all:	flashimg.img
-
-clean:
-	rm -rf *.o *.s86 *.aout *.img
-
-realclean: clean
-	rm -rf *.img
-
-.asm.s86: $*.asm $*.inc
-	  $(CPP) $(CPPFLAGS) -o $@ $*.asm
-
-.s86.img: $*.s86
-	  $(AS86) -0 -b $@ $*.s86
-
-# .s86.o:	$*.s86
-# 	  $(AS86) -0 -a -o $@ $*.s86
-# 
-# .o.aout: $*.o
-# 	  $(LD86) -0 -s -o $@ $*.o
-# 
-# .aout.img:
-# 	  dd if=$*.aout of=$@ bs=32 skip=1

contrib/flashimg/flashimg.asm

@@ -1,497 +0,0 @@
-; Copyright (C) 1997 Markus Gutschke <gutschk@uni-muenster.de>
-;
-; This program is free software; you can redistribute it and/or modify
-; it under the terms of the GNU General Public License as published by
-; the Free Software Foundation; either version 2 of the License, or
-; any later version.
-;
-; This program is distributed in the hope that it will be useful,
-; but WITHOUT ANY WARRANTY; without even the implied warranty of
-; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-; GNU General Public License for more details.
-;
-; You should have received a copy of the GNU General Public License
-; along with this program; if not, write to the Free Software
-; Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-; Prepend this image file to an arbitrary ROM image. The resulting binary
-; can be loaded from any BOOT-Prom that supports the "nbi" file format.
-; When started, the image will reprogram the flash EPROM on the FlashCard
-; ISA card. The flash EPROM has to be an AMD 29F010, and the programming
-; algorithm is the same as that suggested by AMD in the appropriate data
-; sheets.
-
-
-#define SEGLOW		0xC800		/* lower range for EPROM segment     */
-#define SEGHIGH		0xE800		/* upper range for EPROM segment     */
-#define AMD_ID		0x2001		/* flash EPROM ID, only support AMD  */
-#define ERASE1_CMD	0x80		/* first cmd for erasing full chip   */
-#define ERASE2_CMD	0x10		/* second cmd for erasing full chip  */
-#define READID_CMD	0x90		/* cmd to read chip ID               */
-#define PROG_CMD	0xA0		/* cmd to program a byte             */
-#define RESET_CMD	0xF0		/* cmd to reset chip state machine   */
-
-;----------------------------------------------------------------------------
-
-
-	.text
-	.org	0
-
-;	.globl	_main
-_main:	mov	ax,#0x0FE0
-	mov	ds,ax
-	mov	ax,magic		; verify that we have been loaded by
-	cmp	ax,#0xE4E4		; boot prom
-	jnz	lderr
-	jmpi	0x200,0x0FE0		; adjust code segment
-lderr:	mov	si,#loaderr
-	cld
-lderrlp:seg	cs
-	lodsb				; loop over all characters of
-	or	al,al			; string
-	jnz	lderrnx
-	xor	ah,ah
-	int	0x16			; wait for keypress
-	jmpi	0x0000,0xFFFF		; reboot!
-lderrnx:mov	ah,#0x0E		; print it
-	mov	bl,#0x07
-	xor	bh,bh
-	int	0x10
-	jmp	lderrlp
-
-loaderr:.ascii	"The flash EPROM utility has to be loaded from a BOOT-Prom"
-	.byte	0xa,0xd
-	.ascii	"that knows about the 'nbi' file format!"
-	.byte	0xa,0xd
-	.ascii	"Reboot to proceed..."
-	.byte	0
-
-	.org	510
-	.byte	0x55,0xAA
-
-!----------------------------------------------------------------------------
-
-start:	mov	ax,cs
-	mov	ds,ax
-	mov	ax,romdata		; verify that there is an Prom image
-	cmp	ax,#0xAA55		; attached to the utility
-	jnz	resmag
-	mov	al,romdata+2
-	or	al,al			; non-zero size is required
-	jnz	magicok
-resmag:	mov	si,#badmagic		; print error message
-reset:	call	prnstr
-	xor	ah,ah
-	int	0x16			; wait for keypress
-	jmpi	0x0000,0xFFFF		; reboot!
-magicok:mov	di,#clrline1
-	mov	si,#welcome		; print welcome message
-inpnew:	call	prnstr
-inprest:xor	bx,bx
-	mov	cl,#0xC			; expect 4 nibbles input data
-inploop:xor	ah,ah
-	int	0x16
-	cmp	al,#0x8			; <Backspace>
-	jnz	inpnobs
-	or	bx,bx			; there has to be at least one input ch
-	jz	inperr
-	mov	si,#delchar		; wipe out char from screen
-	call	prnstr
-	add	cl,#4			; compute bitmask for removing input
-	mov	ch,cl
-	mov	cl,#0xC
-	sub	cl,ch
-	mov	ax,#0xFFFF
-	shr	ax,cl
-	not	ax
-	and	bx,ax
-	mov	cl,ch
-inploop1:jmp	inploop
-inpnobs:cmp	al,#0x0D		; <Return>
-	jnz	inpnocr
-	or	bx,bx			; zero input -> autoprobing
-	jz	inpdone
-	cmp	cl,#-4			; otherwise there have to be 4 nibbles
-	jz	inpdone
-inperr:	mov	al,#7			; ring the console bell
-	jmp	inpecho
-inpnocr:cmp	al,#0x15		; <CTRL-U>
-	jnz	inpnokl
-	mov	si,di
-	call	prnstr			; clear entire input and restart
-	jmp	inprest
-inpnokl:cmp	cl,#-4			; cannot input more than 4 nibbles
-	jz	inperr
-	cmp	al,#0x30		; '0'
-	jb	inperr
-	ja	inpdig
-	or	bx,bx			; leading '0' is not allowed
-	jz	inperr
-inpdig:	cmp	al,#0x39		; '9'
-	ja	inpnodg
-	mov	ch,al
-	sub	al,#0x30
-inpnum:	xor	ah,ah			; compute new input value
-	shl	ax,cl
-	add	ax,bx
-	test	ax,#0x1FF		; test for 8kB boundary
-	jnz	inperr
-	cmp	ax,#SEGHIGH		; input has to be below E800
-	jae	inperr
-	cmp	ax,#SEGLOW		; and above/equal C800
-	jae	inpok
-	cmp	cl,#0xC			; if there is just one nibble, yet,
-	jnz	inperr			;   then the lower limit ix C000
-	cmp	ax,#0xC000
-	jb	inperr
-inpok:	mov	bx,ax			; adjust bitmask
-	sub	cl,#4
-	mov	al,ch
-inpecho:call	prnchr			; output new character
-	jmp	inploop1
-inpnodg:and	al,#0xDF		; lower case -> upper case
-	cmp	al,#0x41		; 'A'
-	jb	inperr
-	cmp	al,#0x46		; 'F'
-	ja	inperr
-	mov	ch,al
-	sub	al,#0x37
-	jmp	inpnum
-inpdone:or	bx,bx			; zero -> autoprobing
-	jnz	probe
-	mov	si,#automsg
-	call	prnstr
-	mov	cx,#0x10
-	mov	bx,#SEGHIGH		; scan from E800 to C800
-autoprb:sub	bx,#0x0200		; stepping down in 8kB increments
-	mov	di,bx
-	call	readid
-	cmp	ax,#AMD_ID
-	jz	prbfnd
-	loop	autoprb
-	mov	si,#failmsg
-nofnd:	mov	di,#clrline2
-	jmp	near inpnew		; failure -> ask user for new input
-probe:	mov	di,bx
-	test	bx,#0x07FF		; EPROM might have to be aligned to
-	jz	noalign			;   32kB boundary
-	call	readid
-	cmp	ax,#AMD_ID		; check for AMDs id
-	jz	prbfnd
-	mov	si,#alignmsg
-	call	prnstr
-	and	bx,#0xF800		; enforce alignment of hardware addr
-noalign:call	readid			; check for AMDs id
-	cmp	ax,#AMD_ID
-	jz	prbfnd
-	mov	si,#nofndmsg		; could not find any EPROM at speci-
-	call	prnstr			;   fied location --- even tried
-	mov	si,#basemsg		;   aligning to 32kB boundary
-	jmp	nofnd			; failure -> ask user for new input
-prbfnd:	mov	si,#fndmsg
-	call	prnstr			; we found a flash EPROM
-	mov	ax,bx
-	call	prnwrd
-	mov	si,#ersmsg
-	call	prnstr
-	call	erase			; erase old contents
-	jnc	ersdone
-	mov	si,#failresmsg		; failure -> reboot machine
-	jmp	near reset
-ersdone:mov	si,#prg1msg		; tell user that we are about
-	call	prnstr			;   to program the new data into
-	mov	ax,di			;   the specified range
-	call	prnwrd
-	mov	si,#prg2msg
-	call	prnstr
-	xor	dh,dh
-	mov	dl,romdata+2
-	shl	dx,#1
-	mov	ah,dh
-	mov	cl,#4
-	shl	ah,cl
-	xor	al,al
-	add	ax,di
-	call	prnwrd
-	mov	al,#0x3A		; ':'
-	call	prnchr
-	mov	ah,dl
-	xor	al,al
-	dec	ax
-	call	prnwrd
-	mov	al,#0x20
-	call	prnchr
-	mov	dh,romdata+2		; number of 512 byte blocks
-	push	ds
-	mov	ax,ds
-	add	ax,#romdata>>4		; adjust segment descriptor, so that
-	mov	ds,ax			;   we can handle images which are
-prgloop:mov	cx,#0x200		;   larger than 64kB
-	xor	si,si
-	xor	bp,bp
-	call	program			; program 512 data bytes
-	jc	prgerr			; check error condition
-	mov	ax,ds
-	add	ax,#0x20		; increment segment descriptors
-	mov	ds,ax
-	add	di,#0x20
-	dec	dh			; decrement counter
-	jnz	prgloop
-	pop	ds
-	mov	si,#donemsg		; success -> reboot
-prgdone:call	prnstr
-	mov	si,#resetmsg
-	jmp	near reset
-prgerr:	pop	ds			; failure -> reboot
-	mov	si,#failresmsg
-	jmp	prgdone
-
-
-;----------------------------------------------------------------------------
-
-; READID -- read EPROM id number, base address is passed in BX
-; ======
-;
-; changes: AX, DL, ES
-
-readid:	mov	dl,#RESET_CMD		; reset chip
-	call	sendop
-	mov	dl,#READID_CMD
-	call	sendop			; send READID command
-	mov	es,bx
-	seg	es
-	mov	ax,0x00			; read manufacturer ID
-	mov	dl,#RESET_CMD
-	jmp	sendop			; reset chip
-
-
-;----------------------------------------------------------------------------
-
-; ERASE -- erase entire EPROM, base address is passed in BX
-; =====
-;
-; changes: AL, CX, DL, ES, CF
-
-erase:	mov	dl,#ERASE1_CMD
-	call	sendop			; send ERASE1 command
-	mov	dl,#ERASE2_CMD
-	call	sendop			; send ERASE2 command
-	xor	bp,bp
-	mov	al,#0xFF
-	push	di
-	mov	di,bx
-	call	waitop			; wait until operation finished
-	pop	di
-	jnc	erfail
-	mov	dl,#RESET_CMD
-	call	sendop			; reset chip
-	stc
-erfail:	ret
-
-
-;----------------------------------------------------------------------------
-
-; PROGRAM -- write data block at DS:SI of length CX into EPROM at DI:BP
-; =======
-;
-; changes: AX, CX, DL, BP, ES, CF
-
-program:mov	dl,#PROG_CMD
-	call	sendop			; send programming command
-	lodsb				; get next byte from buffer
-	mov	es,di
-	seg	es
-	mov	byte ptr [bp],al	; write next byte into flash EPROM
-	call	waitop			; wait until programming operation is
-	jc	progdn			; completed
-	inc	bp
-	loop	program			; continue with next byte
-	clc				; return without error
-progdn:	ret
-
-
-;----------------------------------------------------------------------------
-
-; SENDOP -- send command in DL to EPROM, base address is passed in BX
-; ======
-;
-; changes: ES
-
-sendop:	mov	es,bx
-	seg	es
-	mov	byte ptr 0x5555,#0xAA	; write magic data bytes into
-	jcxz	so1			;   magic locations. This unlocks
-so1:	jcxz	so2			;   the flash EPROM. N.B. that the
-so2:	seg	es			;   magic locations are mirrored
-	mov	byte ptr 0x2AAA,#0x55	;   every 32kB; the hardware address
-	jcxz	so3			;   might have to be adjusted to a
-so3:	jcxz	so4			;   32kB boundary
-so4:	seg	es
-	mov	byte ptr 0x5555,dl
-	ret
-
-
-;----------------------------------------------------------------------------
-
-; WAITOP -- wait for command to complete, address is passed in DI:BP
-; ======
-;
-; for details on the programming algorithm, c.f. http://www.amd.com
-;
-; changes: AX, DL, ES, CF
-
-waitop:	and	al,#0x80		; monitor bit 7
-	mov	es,di
-wait1:	seg	es			; read contents of EPROM cell that is
-	mov	ah,byte ptr [bp]	;   being programmed
-	mov	dl,ah
-	and	ah,#0x80
-	cmp	al,ah			; bit 7 indicates sucess
-	je	waitok
-	test	dl,#0x20		; bit 5 indicates timeout/error
-	jz	wait1			; otherwise wait for cmd to complete
-	seg	es
-	mov	ah,byte ptr [bp]	; check error condition once again,
-	and	ah,#0x80		;   because bits 7 and 5 can change
-	cmp	al,ah			;   simultaneously
-	je	waitok
-	stc
-	ret
-waitok:	clc
-	ret
-
-;----------------------------------------------------------------------------
-
-; PRNSTR -- prints a string in DS:SI onto the console
-; ======
-;
-; changes: AL
-
-prnstr:	push	si
-	cld
-prns1:	lodsb				; loop over all characters of
-	or	al,al			; string
-	jz	prns2
-	call	prnchr			; print character
-	jmp	prns1
-prns2:	pop	si
-	ret
-
-
-;----------------------------------------------------------------------------
-
-; PRNWRD, PRNBYT, PRNNIB, PRNCHR -- prints hexadezimal values, or ASCII chars
-; ======  ======  ======  ======
-;
-; changes: AX
-
-prnwrd:	push	ax
-	mov	al,ah
-	call	prnbyt			; print the upper byte
-	pop	ax
-prnbyt: push	ax
-	shr	al,1			; prepare upper nibble
-	shr	al,1
-	shr	al,1
-	shr	al,1
-	call	prnnib			; print it
-	pop	ax
-prnnib:	and	al,#0x0F		; prepare lower nibble
-	add	al,#0x30
-	cmp	al,#0x39		; convert it into hex
-	jle	prnchr
-	add	al,#7
-prnchr:	push	bx
-	mov	ah,#0x0E		; print it
-	mov	bl,#0x07
-	xor	bh,bh
-	int	0x10
-	pop	bx
-	ret
-
-
-;----------------------------------------------------------------------------
-
-magic:	.byte	0xE4,0xE4
-
-badmagic:.byte	0xa,0xd
-	.ascii	"There does not appear to be a ROM image attached to the"
-	.ascii	"flash EPROM utility;"
-	.byte	0xa,0xd
-resetmsg:.ascii	"Reboot to proceed..."
-	.byte	0
-	
-welcome:.byte	0xa,0xd
-	.ascii	"Flash EPROM programming utility V1.0"
-	.byte	0xa,0xd
-	.ascii	"Copyright (c) 1997 by M. Gutschke <gutschk@uni-muenster.de>"
-	.byte	0xa,0xd
-	.ascii	"==========================================================="
-	.byte	0xa,0xd
-prompt:	.byte	0xa,0xd
-	.ascii	"Enter base address for AMD29F010 flash EPROM on FlashCard or"
-	.byte	0xa,0xd
-	.ascii	"press <RETURN> to start autoprobing; the base address has"
-	.byte	0xa
-clrline1:.byte	0xd
-	.ascii	"to be in the range C800..E600: "
-	.ascii	"    "
-	.byte	0x8,0x8,0x8,0x8
-	.byte	0
-
-delchar:.byte	0x8,0x20,0x8
-	.byte	0
-
-automsg:.ascii	"autoprobing... "
-	.byte	0
-
-failmsg:.ascii	"failed!"
-basemsg:.byte	0xa
-clrline2:.byte	0xd
-	.ascii	"Enter base address: "
-	.ascii	"    "
-	.byte	0x8,0x8,0x8,0x8
-	.byte	0
-
-fndmsg:	.byte	0xa,0xd
-	.ascii	"Found flash EPROM at: "
-	.byte	0
-
-alignmsg:.byte	0xa,0xd
-	.ascii	"FlashCard requires the hardware address to be aligned to a"
-	.byte	0xa,0xd
-	.ascii	"32kB boundary; automatically adjusting..."
-	.byte	0
-	
-nofndmsg:.byte	0xa,0xd
-	.ascii	"No AMD29F010 flash EPROM found"
-	.byte	0
-
-ersmsg:	.byte	0xa,0xd
-	.ascii	"Erasing old contents... "
-	.byte	0
-
-prg1msg:.ascii	"done"
-	.byte	0xa,0xd
-	.ascii	"Programming from "
-	.byte	0
-	
-prg2msg:.ascii	":0000 to "
-	.byte	0
-
-donemsg:.ascii	"done!"
-	.byte	0xa,0xd
-	.byte	0
-       
-failresmsg:
-	.ascii	"failed!"
-	.byte	0xa,0xd
-	.byte	0
-
-
-;----------------------------------------------------------------------------
-
-	.align	16
-	.org	*-1
-	.byte	0x00
-romdata:

contrib/hdload/Makefile

@@ -1,15 +0,0 @@
-# Use nasm or as86
-ASM=nasm
-# ASM=as86
-
-hdload.bin:	hdload.S
-ifeq ($(ASM),as86)
-	gcc $(CFLAGS) -DUSE_AS86 -E -traditional -o hdload.s hdload.S
-	as86 -0 -b hdload.bin hdload.s
-else
-	gcc $(CFLAGS) -DUSE_NASM -E -traditional -o hdload.s hdload.S
-	nasm -f bin hdload.s -o hdload.bin
-endif
-
-clean:
-	$(RM) -f hdload.s hdload.bin

contrib/hdload/hdload.S

@@ -1,162 +0,0 @@
-#if	!defined(USE_NASM) && !defined(USE_AS86)
-#define	USE_AS86
-#endif
-
-#ifdef	USE_AS86
-#define	CON(x)		*x
-#define	BCON(x)		*x
-#define	WCON(x)		*x
-#define	LOC(x)		x
-#define	BLOC(x)		byte ptr x
-#define	WLOC(x)		word ptr x
-#define	JMP(x)		jmp x
-#define	STRDECL(s)	.ascii	s
-#define	SEGCS		seg	cs
-#define	SEGES		seg	es
-#define	ALIGN(x)	.align	x
-#define	SPACE(x)	.space	x
-#endif
-
-#ifdef	USE_NASM
-#define	CON(x)		x
-#define	BCON(x)		byte x
-#define	WCON(x)		word x
-#define	LOC(x)		[x]
-#define	BLOC(x)		byte [x]
-#define	WLOC(x)		word [x]
-#define	JMP(x)		jmp short x
-#define	STRDECL(s)	db	s
-#define	SEGCS		cs
-#define	SEGES		es
-#define	ALIGN(x)	align x, db 0
-#define	SPACE(x)	times x db 0
-#endif
-
-ROMLOAD	equ	0x5000
-
-start:
-	cli
-	xor	ax, ax
-	mov	ss, ax
-	mov	sp, CON(0x7C00)
-	mov	si, sp
-	mov	es, ax
-	mov	ds, ax
-	sti
-	cld
-	mov	di, CON(0x600)
-	mov	cx, CON(0x100)
-	rep
-	movsw
-	db	0xEA
-	dw	jump
-	dw	0
-jump:
-	mov	si, CON(Hlaska)
-	call	print
-
-        ; rozmery prvniho HD
-        mov     ah, CON(8)
-        mov     dl, CON(0x80)
-        int     0x13
-        jc      chyba
-        ; dh - H, cx - CS
-
-        ; prvi stopa obsahuje bootrom, tak ji natahneme do RAM
-        mov     ah, CON(2)
-        mov     al, cl
-        and     al, CON(0x3F)
-        dec     al
-        mov     dx, CON(0x80)
-        mov     cx, CON(2)
-        mov     bx, CON(ROMLOAD)
-        mov     es, bx
-        xor     bx, bx
-        int     0x13
-        jc      chyba
-
-        ; hromada kodu podle zdrojaku netboot
-        xor     di, di
-        mov     es, di
-        mov     di, CON(0x380)
-        push    di
-        mov     cx, CON(10)
-        cld
-        rep
-	stosw
-        pop     di
-#ifdef	USE_AS86
-        mov     word ptr [ di ], CON(0x5a5a)
-        mov     byte ptr [ di + 2 ], CON(0x50)
-        mov     word ptr [ di + 0x10 ], CON(0xFFFF)
-        mov     word ptr [ di + 0x12 ], CON(0xFFFF)
-#endif
-#ifdef	USE_NASM
-        mov     word [ di ], CON(0x5a5a)
-        mov     byte [ di + 2 ], CON(0x50)
-        mov     word [ di + 10h ], CON(0xFFFF)
-        mov     word [ di + 12h ], CON(0xFFFF)
-#endif
-
-        ; navratova adresa, kdyby nezabrala ROM
-	SEGCS
-        mov	WLOC(OfsErr), CON(RomErr)
-        push    cs
-        push    WCON(chyba)
-        mov     ax, CON(ROMLOAD)
-        mov     es, ax
-        push    es
-        ; kouzelny jump....
-	SEGES
-        mov     si, [ 0x1a ]
-	SEGES
-#ifdef	USE_AS86
-        push    word ptr [ si + 0x1a ] ; ...do bootrom v RAM
-#endif
-#ifdef	USE_NASM
-        push    word [ si + 0x1a ] ; ...do bootrom v RAM
-#endif
-        retf
-
-chyba:
-	SEGCS
-	mov	si, LOC(OfsErr)
-	call	print
-        mov     si, CON(CRLF)
-	call	print
-        JMP(chyba)
-
-print:
-	lodsb
-	cmp	al,CON(0)
-	je	navrat
-	push	si
-	mov	bx,CON(7)
-	mov	ah,CON(0x0E)
-	int	0x10
-	pop	si
-	JMP(print)
-
-navrat:
-	ret
-
-Hlaska:	db	13, 10
-	STRDECL('HD Net Loader v1.0 (c) poli 1999')
-	db	13, 10, 0
-CRLF:	db	13, 10, 0
-OfsErr:	dw	Error
-Error:	STRDECL('Error load from HD !')
-	db	0
-RomErr:	STRDECL('ROM Error !')
-	db	0
-
-mbrend:
-	ret
-
-#ifdef  USE_AS86
-	org     510
-#endif
-#ifdef  USE_NASM
-	times   510-($-$$) db 0
-#endif
-        dw	0xAA55

contrib/hdload/petr.msg

@@ -1,175 +0,0 @@
-From netboot-owner@baghira.han.de Thu Sep 16 12:08:44 1999
-Return-Path: <netboot-owner@baghira.han.de>
-Received: (from factotum@localhost)
-	by baghira.han.de (8.9.3/8.9.3) id NAA23838
-	for netboot-outgoing; Wed, 15 Sep 1999 13:12:44 +0200
-X-Authentication-Warning: baghira.han.de: factotum set sender to owner-netboot using -f
-Received: from hathi.han.de (root@hathi.han.de [192.109.225.1])
-	by baghira.han.de (8.9.3/8.9.3) with ESMTP id NAA23785
-	for <netboot@baghira.han.de>; Wed, 15 Sep 1999 13:11:02 +0200
-Received: from vsb.cz (root@decsys.vsb.cz [158.196.149.9])
-	by hathi.han.de (8.9.3/8.9.3) with ESMTP id NAA04707
-	for <netboot@baghira.han.de>; Wed, 15 Sep 1999 13:11:00 +0200
-Received: from nwfei1.vsb.cz (nwfei1.vsb.cz [158.196.146.13])
-	by vsb.cz (8.9.3/8.9.1) with ESMTP id NAA22363
-	for <netboot@baghira.han.de>; Wed, 15 Sep 1999 13:10:52 +0200 (MET DST)
-Received: from FEI1/SpoolDir by nwfei1.vsb.cz (Mercury 1.44);
-    15 Sep 99 13:10:50 +0100
-Received: from SpoolDir by FEI1 (Mercury 1.44); 15 Sep 99 13:10:27 +0100
-Received: from pcd403z.vsb.cz (158.196.146.9) by nwfei1.vsb.cz (Mercury 1.44) with ESMTP;
-    15 Sep 99 13:10:25 +0100
-Received: from oli10 by pcd403z.vsb.cz with local-esmtp (Exim 2.05 #1 (Debian))
-	id 11RCxI-0000oT-00; Wed, 15 Sep 1999 13:10:28 +0200
-Date: Wed, 15 Sep 1999 13:10:28 +0200 (CEST)
-From: Petr Olivka <Petr.Olivka@vsb.cz>
-To: netboot@baghira.han.de
-Subject: netboot image on hard disk - it is easy
-In-Reply-To: <37DF4BD4.E8FFF8FC@gsmbox.com>
-Message-ID: <Pine.LNX.4.10.9909151247430.2936-100000@pcd403z.vsb.cz>
-MIME-Version: 1.0
-Content-Type: TEXT/PLAIN; charset=US-ASCII
-Sender: owner-netboot@baghira.han.de
-Precedence: bulk
-Reply-To: netboot@baghira.han.de
-X-Moderator: netboot-owner@baghira.han.de
-
-It is good joke, at this moment I have only simple version of MBR to load
-image from HD, but only from track 0. HD have to have enough sectors per
-track for rom image.
-And small program in turbo-pascal to download image to HD.
-
-below is assembler code for MBR. Is writen for tasm and tlink. 
-If you have 512 bytes binary file with MBR code, then concat it with
-rom-image and download to hda. BUT NOT DIRECTLY !!!! You have to copy 
-partition table ( and NT signature ) to MBR and then download. BUT ONLY tO
-TRACK 0.
-
-Everything in your own risk.
-
-If I will have some free time, I will write some code directly to netboot.
-
-poli
-
-.model large, pascal
-
-.code
-.386
-	public 	mbrasm, mbrend
-
-ROMLOAD	equ	5000h
-
-	org	600h
-
-mbrasm	proc
-
-	cli
-	xor	ax, ax
-	mov	ss, ax
-	mov	sp, 7C00h
-	mov	si, sp
-	mov	es, ax
-	mov	ds, ax
-	sti
-	cld
-	mov	di, 600h
-	mov	cx, 100h
-	rep	movsw
-	db	0EAh
-	dw	offset @@jump
-	dw	0
-@@jump:
-	mov	si, offset Hlaska
-	call	@@print
-
-        ; rozmery prvniho HD
-        mov     ah, 8
-        mov     dl, 80h
-        int     13h
-        jc      @@chyba
-        ; dh - H, cx - CS
-
-        ; prvi stopa obsahuje bootrom, tak ji natahneme do RAM
-        mov     ah, 2
-        mov     al, cl
-        and     al, 3Fh
-        dec     al
-        mov     dx, 80h
-        mov     cx, 2
-        mov     bx, ROMLOAD
-        mov     es, bx
-        xor     bx, bx
-        int     13h
-        jc      @@chyba
-
-        ; hromada kodu podle zdrojaku netboot
-        xor     di, di
-        mov     es, di
-        mov     di, 380h
-        push    di
-        mov     cx, 10
-        cld
-        rep     stosw
-        pop     di
-        mov     word ptr [ di ], 5a5ah
-        mov     byte ptr [ di + 2 ], 50h
-        mov     word ptr [ di + 10h ], 0FFFFh
-        mov     word ptr [ di + 12h ], 0FFFFh
-
-        ; navratova adresa, kdyby nezabrala ROM
-        mov	OfsErr, offset RomErr
-        push    cs
-        push    offset @@chyba
-
-        mov     ax, ROMLOAD
-        mov     es, ax
-        push    es
-        ; kouzelny jump....
-        mov     si,  es:[ 1ah ]
-        push    word ptr es:[ si + 1ah ] ; ...do bootrom v RAM
-        retf
-
-@@chyba:
-	mov	si, OfsErr
-	call	@@print
-        mov     si, offset CRLF
-	call	@@print
-        jmp     @@chyba
-
-@@print:
-	lodsb
-	cmp	al,0
-	je	@@navrat
-	push	si
-	mov	bx,7
-	mov	ah,0Eh
-	int	10h
-	pop	si
-	jmp	@@print
-
-@@navrat:
-	retn
-
-Hlaska	db	13, 10, 'HD Net Loader v1.0 (c) poli 1999', 13, 10, 0
-CRLF	db	13, 10, 0
-OfsErr	dw	offset Error
-Error	db	'Error load from HD !', 0
-RomErr	db	'ROM Error !', 0
-
-mbrasm	endp
-
-mbrend	proc
-	ret
-mbrend	endp
-
-        org 800h - 2
-        dw  0AA55h
-
-end
-
-===========================================================================
-This Mail was sent to netboot mailing list by:
-Petr Olivka <Petr.Olivka@vsb.cz>
-To get help about this list, send a mail with 'help' as the only string in
-it's body to majordomo@baghira.han.de. If you have problems with this list,
-send a mail to netboot-owner@baghira.han.de.
-

contrib/initrd/ChangeLog

@@ -1,46 +0,0 @@
-mkinitrd-net ChangeLog
-
-Last Modified: Fri Jul 26 23:08:28 2002
-
-$Log$
-Revision 1.1  2005/05/17 16:45:02  mcb30
-Initial revision
-
-Revision 1.1  2002/11/06 06:31:06  ken_yap
-Contributed by Michael Brown.
-
-Revision 1.10  2002/07/26 23:09:13  mcb30
-Support for new binary etherboot.nic-dev-id structure
-Added --kernel option patch from Stew Benedict at MandrakeSoft
-Only try to use sudo if we are not already root
-
-Revision 1.9  2002/06/05 13:31:50  mcb30
-Modifications to allow DHCP, TFTP and NFS servers to be separate machines.
-
-Revision 1.8  2002/05/30 11:41:18  mcb30
-/tftpboot symlinked to /var/lib/tftpboot
-Has ability to be quiet if "quiet" specified on kernel cmdline
-
-Revision 1.7  2002/05/26 11:15:04  mcb30
-PCI-ID auto-mapping via dhcpd.conf.etherboot-pcimap.include
-
-Revision 1.6  2002/05/24 02:05:11  mcb30
-Bugfixes, migrated /tftpboot to /var/lib/tftpboot
-
-Revision 1.5  2002/05/23 21:29:58  mcb30
-Now includes dhcpd.conf.etherboot.include
-Automatically scans for all network modules in the pcimap file
-
-Revision 1.4  2002/05/08 09:04:31  mcb30
-Bugfixes: tmpdir selection, linuxrc typos, ifconfig peculiarities
-
-Revision 1.3  2002/05/04 21:44:13  mcb30
-During %make, LIBDIR must be set for mknbi
-Added %post scriptlet since %trigger seems not to be being triggered...
-
-Revision 1.2  2002/05/04 21:20:32  mcb30
-Added extra sources instead of requiring "make" to download them
-
-Revision 1.1  2002/05/04 13:19:40  mcb30
-First attempt at an RPM package
-

contrib/initrd/Makefile

@@ -1,187 +0,0 @@
-UCLIBC_VERSION = 0.9.11
-UCLIBC = uClibc-$(UCLIBC_VERSION)
-$(UCLIBC)_SOURCE = http://www.uclibc.org/downloads/$(UCLIBC).tar.bz2
-UCLIBC_INSTALL = $(CURDIR)/uClibc
-
-UDHCP_VERSION = 0.9.7
-UDHCP = udhcp-$(UDHCP_VERSION)
-$(UDHCP)_SOURCE = http://udhcp.busybox.net/source/$(UDHCP).tar.gz
-
-BUSYBOX_VERSION = 0.60.3
-BUSYBOX = busybox-$(BUSYBOX_VERSION)
-$(BUSYBOX)_SOURCE = http://www.busybox.net/downloads/$(BUSYBOX).tar.bz2
-
-LINUX_WLAN_VERSION = 0.1.13
-LINUX_WLAN = linux-wlan-ng-$(LINUX_WLAN_VERSION)
-$(LINUX_WLAN)_SOURCE = ftp://ftp.linux-wlan.org/pub/linux-wlan-ng/$(LINUX_WLAN).tar.gz
-
-MKNBI_VERSION = 1.2
-MKNBI = mknbi-$(MKNBI_VERSION)
-$(MKNBI)_SOURCE = http://belnet.dl.sourceforge.net/sourceforge/etherboot/$(MKNBI).tar.gz
-
-export PATH := $(UCLIBC_INSTALL)/bin:$(PATH)
-
-all : utils initrd-skel mknbi mknbi-linux
-	# Run "make tftpboot/initrd-kernel_module.img" to generate a suitable initrd
-	# Run "make tftpboot/boot-kernel_module.nbi" to generate a suitable NBI
-	# Run "make all-nbi" to generate a complete set of NBIs
-
-%.tar.bz2 :
-	[ -d $* ] || wget $($*_SOURCE)
-	[ -f $*.t*gz ] && ( gunzip $*.t*gz ; bzip2 -9 $*.tar ) || true
-
-UTILS = udhcpc busybox wlanctl
-
-utils : $(UTILS)
-
-clean : partlyclean
-	rm -rf uClibc
-	rm -rf $(UCLIBC)
-	rm -rf tftpboot/*
-
-partlyclean :
-	rm -rf $(UDHCP)
-	rm -rf $(BUSYBOX)
-	rm -rf $(LINUX_WLAN)
-	rm -rf $(MKNBI)
-	rm -rf initrd-skel
-	rm -f *.img *.ird *.nbi insert-modules
-	rm -f $(UTILS) mknbi-linux
-	rm -f *.uClibc *.busybox *.udhcpc *.wlanctl
-
-.PHONY : all utils clean partlyclean
-
-uClibc : $(UCLIBC)
-	rm -rf $@
-	$(MAKE) -C $(UCLIBC) install
-
-$(UCLIBC) : $(UCLIBC).tar.bz2
-	[ -d $@ ] || tar xvjf $<
-	[ -f $(UCLIBC)/Config ] || perl -pe 's/^(INCLUDE_RPC).*/$$1 = true/ ;' \
-		-e 's{^(DEVEL_PREFIX).*}{$$1 = $(UCLIBC_INSTALL)} ;' \
-		-e 's{^(SHARED_LIB_LOADER_PATH).*}{$$1 = /lib} ;' \
-		$(UCLIBC)/extra/Configs/Config.i386 > $(UCLIBC)/Config
-	# Stripping out spurious CVS directories (screws up local cvs update)
-	rm -rf `find $(UCLIBC) -name CVS`
-	$(MAKE) -C $(UCLIBC)
-	install -m 644 $(UCLIBC)/COPYING.LIB COPYING.uClibc
-
-udhcpc : $(UDHCP)
-	install -m 755 -s $(UDHCP)/$@ $@
-
-$(UDHCP) : $(UDHCP).tar.bz2 uClibc
-	[ -d $@ ] || tar xvjf $<
-	if [ ! -f $@/.script.c.patch ]; then \
-		patch -d $@ -b -z .orig < script.c.patch ; \
-		touch $@/.script.c.patch ; \
-	fi
-	$(MAKE) LDFLAGS+=-static -C $(UDHCP)
-	install -m 644 $(UDHCP)/AUTHORS AUTHORS.udhcpc
-	install -m 644 $(UDHCP)/COPYING COPYING.udhcpc
-
-busybox : $(BUSYBOX)
-	install -m 755 -s $(BUSYBOX)/$@ $@
-
-$(BUSYBOX) : $(BUSYBOX).tar.bz2 uClibc
-	[ -d $@ ] || tar xvjf $<
-	perl -pi.orig -e \
-	  's/^.*(#define BB_(FEATURE_NFSMOUNT|INSMOD|PIVOT_ROOT|IFCONFIG|ROUTE)).*/$$1/' \
-	  $(BUSYBOX)/Config.h
-	perl -pi.orig -e \
-	  's/^(DOSTATIC).*$$/$$1 = true/' \
-	  $(BUSYBOX)/Makefile
-	$(MAKE) -C $(BUSYBOX)
-	install -m 644 $(BUSYBOX)/AUTHORS AUTHORS.busybox
-	install -m 644 $(BUSYBOX)/LICENSE LICENSE.busybox
-
-wlanctl : $(LINUX_WLAN)
-	install -m 755 -s $(LINUX_WLAN)/src/wlanctl/$@ $@
-
-$(LINUX_WLAN) : $(LINUX_WLAN).tar.bz2 uClibc linux-wlan.cfg
-	[ -d $@ ] || tar xvjf $<
-	cd $(LINUX_WLAN) ; ./Configure -d ../linux-wlan.cfg
-	perl -pi.orig -e \
-	  's/(-o wlanctl)/-static $$1/' \
-	  $(LINUX_WLAN)/src/wlanctl/Makefile
-	$(MAKE) -C $(LINUX_WLAN)/src/wlanctl
-	install -m 644 $(LINUX_WLAN)/COPYING COPYING.wlanctl
-	install -m 644 $(LINUX_WLAN)/LICENSE LICENSE.wlanctl
-	install -m 644 $(LINUX_WLAN)/THANKS THANKS.wlanctl
-
-mknbi-linux : $(MKNBI)
-
-mknbi : $(MKNBI)
-
-$(MKNBI) : $(MKNBI).tar.bz2
-	[ -d $@ ] || tar xvjf $<
-	if [ ! -f $@/.mknbi-encap.patch ]; then \
-		patch -d $@ -b -z .orig < mknbi-encap.patch ; \
-		touch $@/.mknbi-encap.patch ; \
-	fi
-	make -C $(MKNBI) LIBDIR=`pwd`/$(MKNBI) mknbi
-	install -m 755 $(MKNBI)/mknbi mknbi-linux
-	make -C $(MKNBI) clean
-	make -C $(MKNBI)
-
-initrd-skel : $(UTILS) linuxrc udhcpc-post include-modules
-	rm -rf $@
-	mkdir -p $@
-	mkdir -p $@/dev
-	mkdir -p $@/etc
-	mkdir -p $@/bin
-	mkdir -p $@/lib
-	mkdir -p $@/lib/modules
-	mkdir -p $@/proc
-	mkdir -p $@/sysroot
-	ln -s bin $@/sbin
-	install -m 755 busybox $@/bin/
-	install -m 755 udhcpc $@/bin/
-	install -m 755 wlanctl $@/bin/
-	ln -s busybox $@/bin/sh
-	ln -s busybox $@/bin/echo
-	ln -s busybox $@/bin/mknod
-	ln -s busybox $@/bin/chmod
-	ln -s busybox $@/bin/insmod
-	ln -s busybox $@/bin/ifconfig
-	ln -s busybox $@/bin/route
-	ln -s busybox $@/bin/mount
-	ln -s busybox $@/bin/pivot_root
-	ln -s busybox $@/bin/umount
-	ln -s busybox $@/bin/[
-	ln -s busybox $@/bin/sleep
-	ln -s busybox $@/bin/grep
-
-	install -m 755 linuxrc $@/linuxrc
-	install -m 755 udhcpc-post $@/bin/udhcpc-post
-
-tftpboot/initrd-%.img : initrd-skel
-	./mkinitrd-net -l `echo $* | tr . " "`
-
-tftpboot/boot-%.nbi : tftpboot/initrd-%.img mknbi-linux
-	./mknbi-linux --format=nbi --target=linux /boot/vmlinuz $< > $@
-	sudo cp $@ $(tftpbootdir)
-
-all-nbi : all
-	./mknbi-set -l -v
-	ls tftpboot
-
-prefix = /usr
-sysconfdir = /etc
-bindir = $(prefix)/bin
-libdir = $(prefix)/lib
-mandir = $(prefix)/share/man
-docdir = $(prefix)/share/doc
-tftpbootdir = /var/lib/tftpboot
-initrdskeldir = $(prefix)/lib/mkinitrd-net/initrd-skel
-
-install :
-	mkdir -p $(libdir)/mknbi
-	mkdir -p $(bindir)
-	mkdir -p $(sysconfdir)
-	mkdir -p $(tftpbootdir)
-	mkdir -p $(initrdskeldir)
-	install -m 755 mkinitrd-net include-modules mknbi-set $(bindir)/
-	cp -a initrd-skel/* $(initrdskeldir)/
-	install -m 644 mknbi-set.conf dhcpd.conf.etherboot.include $(sysconfdir)
-	make -C $(MKNBI) INSTPREFIX=$(prefix) MANDIR=$(mandir)/man1 \
-		DOCDIR=$(docdir)/$(MKNBI) install

contrib/initrd/Manifest

@@ -1,15 +0,0 @@
-initrd/ChangeLog
-initrd/Makefile
-initrd/Manifest
-initrd/README
-initrd/dhcpd.conf.etherboot.include
-initrd/include-modules
-initrd/linux-wlan.cfg
-initrd/linuxrc
-initrd/mkinitrd-net
-initrd/mkinitrd-net.spec
-initrd/mknbi-encap.patch
-initrd/mknbi-set
-initrd/mknbi-set.conf
-initrd/script.c.patch
-initrd/udhcpc-post

contrib/initrd/README

@@ -1,37 +0,0 @@
-README for mkinitrd-net
-
-mkinitrd-net enables you to use your distribution's stock kernel for
-diskless workstations, without having to compile in support for the
-relevant network card(s).  It creates an initial ramdisk image containing
-the required network-card kernel modules and bootstrap scripts to load the
-module, obtain an IP address via DHCP and mount the root filesystem via
-NFS.
-
-mkinitrd-net also generates a dhcpd.conf file fragment that can be used to
-automate the process of mapping NBI files to clients, based on the PCI IDs
-of their network cards.  Etherboot will send the PCI ID of the network
-card to the DHCP server in the etherboot-encapsulated-options field
-(Etherboot 5.0.7 and newer) and the DHCP server can use this to identify
-the correct NBI to point the client towards.
-
-The end result is that:
-
-a) You can avoid the hassle of compiling custom kernels for diskless
-   workstations.
-
-b) Diskless workstations will automatically download the correct
-   kernel+initrd.
-
-c) You have an easier life! :-)
-
-
-
-mkinitrd-net is Copyright Fen Systems Ltd. 2001.  mkinitrd-net itself is
-licensed under the GNU GPL.  It incorporates code from the uClibc,
-busybox, udhcpc and Etherboot projects, each of which has its own licence
-terms.  Standard disclaimers apply.
-
-The copy of mkinitrd-net in the Etherboot contribs is not the
-authoritative copy of mkinitrd-net; please do not make modifications to
-this copy.  Patches should be sent to Michael Brown
-<mbrown@fensystems.co.uk>.

contrib/initrd/dhcpd.conf.etherboot.include

@@ -1,207 +0,0 @@
-# dhcpd.conf include file for Etherboot
-#
-# Include this file from your /etc/dhcpd.conf
-# $Id$
-
-# Definition of Etherboot options
-# (taken from vendortags.html)
-
-# We use an encapsulated option space to avoid polluting the site-local DHCP option space
-#
-option space etherboot;
-option etherboot-encapsulated-options code 150 = encapsulate etherboot;
-
-# Definition of option codes within the etherboot-encapsulated-options space
-#
-option etherboot.extensions-path code 18 = string;
-option etherboot.magic		code 128 = string;
-option etherboot.kernel-cmdline	code 129 = string;
-option etherboot.menu-opts	code 160 = string;
-option etherboot.nic-dev-id	code 175 = string;
-option etherboot.menu-selection	code 176 = unsigned integer 8;
-option etherboot.motd-1		code 184 = string;
-option etherboot.motd-2		code 185 = string;
-option etherboot.motd-3		code 186 = string;
-option etherboot.motd-4		code 187 = string;
-option etherboot.motd-5		code 188 = string;
-option etherboot.motd-6		code 189 = string;
-option etherboot.motd-7		code 190 = string;
-option etherboot.motd-8		code 191 = string;
-option etherboot.image-1	code 192 = string;
-option etherboot.image-2	code 193 = string;
-option etherboot.image-3	code 194 = string;
-option etherboot.image-4	code 195 = string;
-option etherboot.image-5	code 196 = string;
-option etherboot.image-6	code 197 = string;
-option etherboot.image-7	code 198 = string;
-option etherboot.image-8	code 199 = string;
-option etherboot.image-9	code 200 = string;
-option etherboot.image-10	code 201 = string;
-option etherboot.image-11	code 202 = string;
-option etherboot.image-12	code 203 = string;
-option etherboot.image-13	code 204 = string;
-option etherboot.image-14	code 205 = string;
-option etherboot.image-15	code 206 = string;
-option etherboot.image-16	code 207 = string;
-option etherboot.kmod		code 254 = string;
-
-# Legacy support for Etherboot options as site-local options (i.e. non-encapsulated)
-# Note: options defined after the switch to encapsulated options should not be defined here
-#
-option legacy-etherboot-magic		code 128 = string;
-option legacy-etherboot-kernel-cmdline	code 129 = string;
-option legacy-etherboot-menu-opts	code 160 = string;
-option legacy-etherboot-menu-selection	code 176 = unsigned integer 8;
-option legacy-etherboot-motd-1		code 184 = string;
-option legacy-etherboot-motd-2		code 185 = string;
-option legacy-etherboot-motd-3		code 186 = string;
-option legacy-etherboot-motd-4		code 187 = string;
-option legacy-etherboot-motd-5		code 188 = string;
-option legacy-etherboot-motd-6		code 189 = string;
-option legacy-etherboot-motd-7		code 190 = string;
-option legacy-etherboot-motd-8		code 191 = string;
-option legacy-etherboot-image-1		code 192 = string;
-option legacy-etherboot-image-2		code 193 = string;
-option legacy-etherboot-image-3		code 194 = string;
-option legacy-etherboot-image-4		code 195 = string;
-option legacy-etherboot-image-5		code 196 = string;
-option legacy-etherboot-image-6		code 197 = string;
-option legacy-etherboot-image-7		code 198 = string;
-option legacy-etherboot-image-8		code 199 = string;
-option legacy-etherboot-image-9 	code 200 = string;
-option legacy-etherboot-image-10	code 201 = string;
-option legacy-etherboot-image-11	code 202 = string;
-option legacy-etherboot-image-12	code 203 = string;
-option legacy-etherboot-image-13	code 204 = string;
-option legacy-etherboot-image-14	code 205 = string;
-option legacy-etherboot-image-15	code 206 = string;
-option legacy-etherboot-image-16	code 207 = string;
-
-# Apply Etherboot options only for Etherboot clients
-#
-if substring ( option vendor-class-identifier, 0, 9 ) = "Etherboot" {
-
-  # We must specify this value for etherboot-magic, or Etherboot will
-  # ignore all other options.
-  #
-  option etherboot.magic E4:45:74:68:00:00;
-
-  # Bootfile name: derive from etherboot.kmod (calculated below)
-  # Use boot.nbi if no NIC_DEV_ID option present
-  # (i.e. if etherboot.kmod doesn't get set)
-  # Also pass filename back in filename field
-  #
-  option bootfile-name = pick-first-value ( concat ( "boot-",
-						     config-option etherboot.kmod,
-						     ".nbi" ),
-					    "boot.nbi" ) ;
-  filename = config-option bootfile-name;
-
-  # "Sensible" default values for some options
-
-  # Mount devfs (will probably be needed for a network-boot)
-  option etherboot.kernel-cmdline " devfs=mount";
-
-  # Info message (includes client IP address, MAC address, hardware ID string,
-  # server IP address and name of boot file)
-  option etherboot.motd-4 = concat ( "Using Etherboot to boot ",
-				     binary-to-ascii ( 10, 8, ".", leased-address ),
-				     " [",
-				     binary-to-ascii ( 16, 8, ":", suffix ( hardware, 6 ) ),
-				     "] [",
-				     pick-first-value ( option etherboot.nic-dev-id, "unknown card" ),
-				     "]", 0d:0a, "  from ",
-				     binary-to-ascii ( 10, 8, ".", option dhcp-server-identifier ),
-				     " with file ",
-				     config-option tftp-server-name,
-				     ":",
-				     config-option bootfile-name,
-				     " [",
-				     pick-first-value ( config-option etherboot.kmod, "unknown module" ),
-				     "]", 0d:0a );
-
-  # Legacy site-local option support
-  # If client does not include an etherboot-encapsulated-options field in its DHCPREQUEST, then
-  # it will not understand etherboot-encapsulated-options in the DHCPACK and so we must send
-  # back the options as site-local options (i.e. not encapsulated).
-  # Note: we need do this only for options that existed prior to the switch to encapsulation.
-  #
-  if not exists etherboot-encapsulated-options {
-    option legacy-etherboot-magic	= config-option etherboot.magic;
-    option legacy-etherboot-kernel-cmdline = config-option etherboot.kernel-cmdline;
-    option legacy-etherboot-menu-opts	= config-option etherboot.menu-opts;
-    option legacy-etherboot-menu-selection = config-option etherboot.menu-selection;
-    option legacy-etherboot-motd-1	= config-option etherboot.motd-1;
-    option legacy-etherboot-motd-2	= config-option etherboot.motd-2;
-    option legacy-etherboot-motd-3	= config-option etherboot.motd-3;
-    option legacy-etherboot-motd-4	= config-option etherboot.motd-4;
-    option legacy-etherboot-motd-5	= config-option etherboot.motd-5;
-    option legacy-etherboot-motd-6	= config-option etherboot.motd-6;
-    option legacy-etherboot-motd-7	= config-option etherboot.motd-7;
-    option legacy-etherboot-motd-8	= config-option etherboot.motd-8;
-    option legacy-etherboot-image-1	= config-option etherboot.image-1;
-    option legacy-etherboot-image-2	= config-option etherboot.image-2;
-    option legacy-etherboot-image-3	= config-option etherboot.image-3;
-    option legacy-etherboot-image-4	= config-option etherboot.image-4;
-    option legacy-etherboot-image-5	= config-option etherboot.image-5;
-    option legacy-etherboot-image-6	= config-option etherboot.image-6;
-    option legacy-etherboot-image-7	= config-option etherboot.image-7;
-    option legacy-etherboot-image-8	= config-option etherboot.image-8;
-    option legacy-etherboot-image-9	= config-option etherboot.image-9;
-    option legacy-etherboot-image-10	= config-option etherboot.image-10;
-    option legacy-etherboot-image-11	= config-option etherboot.image-11;
-    option legacy-etherboot-image-12	= config-option etherboot.image-12;
-    option legacy-etherboot-image-13	= config-option etherboot.image-13;
-    option legacy-etherboot-image-14	= config-option etherboot.image-14;
-    option legacy-etherboot-image-15	= config-option etherboot.image-15;
-    option legacy-etherboot-image-16	= config-option etherboot.image-16;
-  }
-}
-
-# Some options should be set for both Etherboot and the udhcpc client
-#
-if ( ( substring ( option vendor-class-identifier, 0, 9 ) = "Etherboot" ) 
-     or ( substring ( option vendor-class-identifier, 0, 5 ) = "udhcp" ) ) {
-
-  # TFTP server defaults to DHCP server and is specified in both
-  # next-server field and tftp-server-name option field
-  #
-  option tftp-server-name = binary-to-ascii ( 10, 8, ".", config-option dhcp-server-identifier );
-  server-name = config-option tftp-server-name;
-  next-server = config-option dhcp-server-identifier;
-
-  # Root path defaults to root of TFTP server
-  option root-path = concat ( config-option tftp-server-name, ":/" );
-
-  # A fallback hostname, generated from the IP address
-  option host-name = concat ( "client_", binary-to-ascii ( 10, 8, "_", leased-address ) );
-}
-
-# Force some items onto parameter request list for udhcp
-#
-if substring ( option vendor-class-identifier, 0, 5 ) = "udhcp" {
-  # Forcibly add root-path to list
-  option dhcp-parameter-request-list = concat ( option dhcp-parameter-request-list, 11 );
-}
-
-# Etherboot sends a string to identify the NIC in etherboot.nic-dev-id.
-# For PCI NICs, this string is of the form "PCI:vvvv:dddd" where vvvv is the 
-# vendor identifier and dddd the device identifier, in lower-case ASCII hex.
-# For ISA NICs, the format of the string is "ISA:..." where ... is not yet
-# decided upon.
-#
-# We use the identifier to select the NBI image that will be specified via
-# the "bootfile-name" option.
-#
-# PCI NICs - use PCI vendor and device IDs
-# Listed in file generated by mknbi-set
-#
-include "/etc/dhcpd.conf.etherboot-pcimap.include";
-
-# ISA NICs
-#
-if substring ( option vendor-class-identifier, 0, 9 ) = "Etherboot" {
-  if exists etherboot.nic-dev-id {
-
-  }
-}

contrib/initrd/include-modules

@@ -1,63 +0,0 @@
-#!/usr/bin/perl -w
-#
-# Retrieve modules required for an initrd image
-# $Id$
-
-unless ( @ARGV ) {
-  die "Syntax: $0 [ -d target_directory ] module_1 module_2 module_3\n"
-}
-
-# Parse command line arguments
-my @requested_modules = ();
-my $target_dir = "";
-my $kernel_ver;
-my $quiet;
-chomp ( my $current_kernel_ver = `uname -r` );
-while ( $_ = shift ) {
-  if    ( /-d/ ) { $target_dir = shift }
-  elsif ( /-k/ ) { $kernel_ver = shift }
-  elsif ( /-q/ ) { $quiet = 1 }
-  else           { push @requested_modules, $_ };
-}
-
-# Create target directory if required
-if ( $target_dir ) {
-  print STDERR "Target directory is $target_dir\n" unless $quiet;
-  system ( "mkdir -p $target_dir" );
-  chdir $target_dir;
-}
-
-# Use modprobe -nav to retrieve locations of modules and their dependencies
-print STDERR "Requested modules ". join (' ', @requested_modules)."\n" unless $quiet;
-my @modules_dups;
-foreach my $module ( @requested_modules ) {
-  my @module_list = map { /^\S+\s+(.*)$/ ; $1 } `/sbin/modprobe -nva $module`;
-  die "Cannot find any modules matching $module\n" unless @module_list;
-  push @modules_dups, @module_list;
-}
-
-# Remove duplicates from list
-my %module_basenames = ();
-my @modules = ();
-foreach my $module ( @modules_dups ) {
-  # Ugly hack : assume that dependencies are independent of kernel version
-  # This seems to be necessary because we can't run modprobe and specify
-  # an alternate modules.dep file; it refuses to understand lines of the 
-  # form "depfile=XXX" as documented in modules.conf(5)
-  $module =~ s/$current_kernel_ver/$kernel_ver/ if $kernel_ver;
-  push @modules, $module unless $module_basenames{$module};
-  ( my $basename ) = ( $module =~ /([^\/]+)\.o/ ); 
-  $module_basenames{$module} = $basename;
-}
-
-# Process module list
-print "#!/bin/sh\n";
-foreach my $module ( @modules ) {
-  my $basename = $module_basenames{$module};
-  # Report via stdout
-  print STDERR "Using module $basename from $module\n" unless $quiet;
-  # Copy uncompressed module to current directory
-  system ("gunzip -c $module > $basename.o");
-  # Print insmod line to stdout
-  print "insmod $basename\n";
-}

contrib/initrd/linux-wlan.cfg

@@ -1,7 +0,0 @@
-# Dummy config file for building only wlanctl
-# $Id$
-
-PRISM2_PLX=n
-PRISM2_PCMCIA=n
-PRISM2_PCI=n
-PRISM2_USB=n

contrib/initrd/linuxrc

@@ -1,76 +0,0 @@
-#!/bin/sh
-# $Id$
-
-PATH=/sbin:/bin
-
-echo Busybox /linuxrc starting
-
-echo Mounting /proc filesystem
-mount -t proc none /proc
-
-echo=echo
-if grep '\bquiet\b' /proc/cmdline > /dev/null; then
-  echo=true
-  quiet=1
-fi
-
-$echo Creating root device
-mknod /dev/root b 1 0 2>/dev/null
-chmod 700 /dev/root
-echo 0x100 > /proc/sys/kernel/real-root-dev
-
-$echo Inserting modules
-if [ -z "$quiet" ]; then
-  /bin/insert-modules
-else
-  /bin/insert-modules >/dev/null
-fi
-
-$echo Bringing up loopback interface
-ifconfig lo 127.0.0.1 up
-route add -net 127.0.0.0 netmask 255.0.0.0 lo
-
-# Hack required for prism2 cards
-# It is not yet possible to use iwconfig to configure these cards,
-# so we need wlanctl.
-if ifconfig wlan0 down 2> /dev/null; then
-  $echo Setting up wireless link
-  wlanctl wlan0 lnxreq_ifstate ifstate=enable
-  wlanctl wlan0 lnxreq_autojoin ssid= authtype=opensystem
-fi
-
-$echo Obtaining IP address via DHCP
-$echo Trying to obtain IP address via wired link [eth0]
-if udhcpc -i eth0 -f -n -q -s /bin/udhcpc-post; then
-  $echo Successfully obtained IP address via wired link [eth0]
-else
-  $echo Failed to obtain IP address via wired link [eth0]
-  $echo Trying to obtain IP address via wireless link [wlan0]
-  udhcpc -i wlan0 -f -n -q -s /bin/udhcpc-post
-fi
-
-if [ -d /sysroot/initrd ]; then
-  $echo Unmounting /proc prior to pivot_root
-  umount /proc
-
-  $echo Pivoting root to /sysroot
-  pivot_root /sysroot /sysroot/initrd
-  cd /
-
-  $echo Remounting devfs at correct place
-  mount -t devfs none /dev
-
-  $echo Releasing locks on old devfs
-  exec 0</dev/null
-  exec 1>/dev/console
-  exec 2>/dev/console
-
-  $echo Unmounting old devfs
-  umount /initrd/dev
-else
-  # Failed to mount root: report error and hang
-  echo FATAL ERROR: Failed to mount root filesystem
-  echo Press Alt-SysRq-B or hit the reset switch to reboot
-  while : ; do sleep 6000 ; done
-fi
-

contrib/initrd/mkinitrd-net

@@ -1,165 +0,0 @@
-#!/bin/sh
-#
-# $Id$
-# initrd builder for network booting
-
-# Utility function to determine whether or not a filesystem is usable for
-# loopback mounts.  Lifted verbatim from Erik Troan's mkinitrd script.
-#
-is_good_fs() {
-    local parttype= tmpname=
-    local dir=$1
-    [[ -d $dir ]] || return 1
-    [[ -w $dir ]] || return 1
-    [[ $dir == */ ]] && dir=${dir%/}
-    parttype=$(awk "{if (\$2 == \""$dir"\") print \$3 }" /proc/mounts)
- 
-    while tmpname=${dir%/*} && [[ -z $parttype ]];do
-        [[ -z $tmpname ]] && tmpname=/
-        parttype=$(awk "{if (\$2 == \""$tmpname"\") print \$3 }" /proc/mounts)
-        dir=$tmpname
-    done
- 
-    case $parttype in
-        nfs|tmpfs) return 1;;
-        *) return 0;
-    esac
-}
-
-# Find a suitable temporary directory (i.e. not tmpfs or nfs)
-if is_good_fs $TMPDIR; then
-  tmpdir=$TMPDIR
-elif is_good_fs /tmp; then
-  tmpdir=/tmp
-elif is_good_fs /var/tmp; then
-  tmpdir=/var/tmp
-elif is_good_fs /root/tmp; then
-  tmpdir=/root/tmp
-else
-  echo "Cannot use a tmp directory" >&2
-  exit 1
-fi
-
-# Default settings (some can be overridden by command-line options)
-include_modules=include-modules
-initrd_skel=/usr/lib/mkinitrd-net/initrd-skel
-kernel_ver=`uname -r`
-use_sudo=y
-keep=n
-output_dir=/var/lib/tftpboot
-make_link=y
-quiet=
-
-# No need to use sudo if we are root
-if [ $UID -eq 0 ]; then
-  use_sudo=n
-fi
-
-USAGE="Usage: $0 [-k|--kernel <kernel_ver>] [-n|--nolink] [-q|--quiet] [-l|--local] [--nosudo] [--keep] [--help] module_list ..."
-
-# Parse command-line options
-while [ $# -gt 0 ]; do
-  case "$1" in
-    -l|--local)
-		shift
-		use_local=y ;;
-    -k|--kernel)
-		shift
-		kernel_ver=$1
-		shift ;;
-    --nosudo)   shift ; use_sudo=n ;;
-    --keep)     shift ; keep=y ;;
-    --n|--nolink)
-		shift ; make_link=n ;;
-    -q|--quiet) shift ; quiet=-q ;;
-    --help)	shift ; do_help=y ;;
-    --)		shift ; break ;;
-    -*)		echo "${0}: ${1}: invalid option" >&2
-		echo $USAGE >& 2
-		exit 2 ;;
-    *)		break ;;
-  esac
-done
-
-# Build list of requested modules
-modules="$*"
-requested_modules="$modules"
-modules="$modules nfs" # Always require nfs for nfs mount
-modules="$modules af_packet" # Always require af_packet for udhcpc
-
-# --help => Print help message
-if [ "$do_help" == "y" ]; then
-  echo $USAGE
-  echo "  -k, --kernel   Specify kernel version"
-  echo "  -n, --nolink   Do not create a matching symbolic link"
-  echo "  -l, --local    Run locally from CVS (for developers only)"
-  echo "  --nosudo       Do not use sudo (i.e. must run as root instead)"
-  echo "  --keep         Keep temporary files instead of deleting them"
-  exit 0;
-fi
-
-# --local => we are running directly from CVS, rather than
-# from an installed copy, so use local files and directories
-if [ "$use_local" == "y" ]; then
-  include_modules=./include-modules
-  initrd_skel=initrd-skel
-  output_dir=tftpboot
-fi
-
-# If use_sudo is set, check that sudo exists
-sudo=/usr/bin/sudo
-if [ "$use_sudo" == "y" ]; then
-  if [ ! -x $sudo ]; then
-    use_sudo=n
-    echo "WARNING: --nosudo not specified but $sudo not found"
-  fi
-fi
-if [ "$use_sudo" == "n" ]; then
-  sudo=
-fi
-
-# Create temporary working files
-initrd=`mktemp -d ${tmpdir}/initrd.XXXXXX`
-initrdimg=`mktemp ${tmpdir}/initrd.img.XXXXXX`
-initrdmnt=`mktemp -d ${tmpdir}/initrd.mnt.XXXXXX`
-
-# Copy skeleton into temporary area
-cp -a $initrd_skel/* $initrd/
-mkdir -p $initrd/lib/modules/$kernel_ver
-$include_modules $quiet -k $kernel_ver -d $initrd/lib/modules/$kernel_ver $modules > $initrd/bin/insert-modules || exit 1
-chmod 755 $initrd/bin/insert-modules
-
-# Create empty ext2fs image file
-dd if=/dev/zero bs=1k of=$initrdimg count=$((`du -sk $initrd | cut -f1` * 7 / 6)) 2> /dev/null
-/sbin/mke2fs -q -F $initrdimg 2> /dev/null
-
-# Mount image file, copy files on, create /dev entries, display free space, umount
-$sudo mount -o loop $initrdimg $initrdmnt
-cp -a $initrd/* $initrdmnt/
-$sudo mknod $initrdmnt/dev/console c 5 1
-$sudo mknod $initrdmnt/dev/null c 1 3
-$sudo mknod $initrdmnt/dev/ram b 1 1
-$sudo mknod $initrdmnt/dev/systty c 4 0
-for i in 1 2 3 4; do $sudo mknod $initrdmnt/dev/tty$i c 4 $i; done
-if [ "$quiet" == "n" ]; then
-  df -h $initrdmnt
-fi
-$sudo umount $initrdmnt
-
-# Create output file
-initrd_suffix=`echo $requested_modules | tr " " .`
-gzip -9 -n -c $initrdimg > $output_dir/initrd-$initrd_suffix.$kernel_ver.img
-
-# Create symlink
-if [ "$make_link" == "y" ]; then
-  link=$output_dir/initrd-$initrd_suffix.img
-  [ -L $link ] && rm -f $link
-  ln -s initrd-$initrd_suffix.$kernel_ver.img $link
-fi
-
-# Remove temporary files
-if [ "$keep" == "n" ]; then
-  rm -rf $initrd
-  rm -f $initrdimg
-  rmdir $initrdmnt
-fi

contrib/initrd/mkinitrd-net.spec

@@ -1,112 +0,0 @@
-%define name mkinitrd-net
-%define version 1.10
-%define release 1fs
-
-Summary: Network-booting initrd builder 
-Name: %{name}
-Version: %{version}
-Release: %{release}
-Source0: %{name}-%{version}.tar.bz2
-Source1: http://belnet.dl.sourceforge.net/sourceforge/etherboot/mknbi-1.2.tar.bz2
-Source2: http://www.busybox.net/downloads/busybox-0.60.3.tar.bz2
-Source3: http://www.uclibc.org/downloads/uClibc-0.9.11.tar.bz2
-Source4: ftp://ftp.linux-wlan.org/pub/linux-wlan-ng/linux-wlan-ng-0.1.13.tar.bz2
-Source5: http://udhcp.busybox.net/source/udhcp-0.9.7.tar.bz2
-Copyright: GPL/LGPL/MPL
-Group: System/Kernel and hardware
-BuildRoot: %{_tmppath}/%{name}-buildroot
-Prefix: %{_prefix}
-Requires: tftp-server
-
-%description
-mkinitrd-net allows you to build initial ramdisk images (initrds) suitable
-for use with Etherboot and other network-booting software.  This package
-contains two main utilities: mkinitrd-net (to build an initrd containing a
-specified set of network-card modules) and mknbi (to generate
-Etherboot-usable NBI images from a given kernel and initrd).  It also
-contains a helper script mknbi-set which will maintain sets of initrds to
-match all your currently-installed kernels.
-
-mkinitrd-net uses code from the uClibc, busybox, udhcp and Etherboot
-projects.
-
-%prep
-%setup -n initrd -a1 -a2 -a3 -a4 -a5
-
-%build
-%make LIBDIR=%{_libdir}/mknbi
-
-%install
-rm -rf $RPM_BUILD_ROOT
-%makeinstall tftpbootdir=$RPM_BUILD_ROOT%{_localstatedir}/tftpboot
-touch $RPM_BUILD_ROOT%{_sysconfdir}/dhcpd.conf.etherboot-pcimap.include
-ln -s %{_localstatedir}/tftpboot $RPM_BUILD_ROOT/tftpboot
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%post
-%{_bindir}/mknbi-set
-
-%triggerin -- kernel kernel-smp kernel-secure kernel-enterprise
-%{_bindir}/mknbi-set
-
-%files
-%defattr(-,root,root)
-%config(noreplace) %{_sysconfdir}/mknbi-set.conf
-%config(noreplace) %{_sysconfdir}/dhcpd.conf.etherboot.include
-%ghost %{_sysconfdir}/dhcpd.conf.etherboot-pcimap.include
-%{_bindir}/mknbi-*
-%{_bindir}/mkelf-*
-%{_bindir}/dis*
-%{_bindir}/mkinitrd-net
-%{_bindir}/include-modules
-%{_libdir}/mknbi
-%{_libdir}/mkinitrd-net
-%{_mandir}/man*/*
-/tftpboot
-%{_localstatedir}/tftpboot
-%doc README
-%doc AUTHORS.busybox LICENSE.busybox
-%doc AUTHORS.udhcpc COPYING.udhcpc
-%doc COPYING.wlanctl LICENSE.wlanctl THANKS.wlanctl
-%doc COPYING.uClibc
-%docdir %{_docdir}/mknbi*
-%{_docdir}/mknbi*
-
-%changelog
-* Fri Jul 26 2002 Michael Brown <mbrown@fensystems.co.uk> 1.10-1fs
-- Support for new binary etherboot.nic-dev-id structure
-- Added --kernel option patch from Stew Benedict at MandrakeSoft
-- Only try to use sudo if we are not already root
-
-* Wed Jun 05 2002 Michael Brown <mbrown@fensystems.co.uk> 1.9-1fs
-- Modifications to allow DHCP, TFTP and NFS servers to be separate machines.
-
-* Thu May 30 2002 Michael Brown <mbrown@fensystems.co.uk> 1.8-1fs
-- /tftpboot symlinked to /var/lib/tftpboot
-- Has ability to be quiet if "quiet" specified on kernel cmdline
-
-* Sun May 26 2002 Michael Brown <mbrown@fensystems.co.uk> 1.7-1fs
-- PCI-ID auto-mapping via dhcpd.conf.etherboot-pcimap.include
-
-* Fri May 24 2002 Michael Brown <mbrown@fensystems.co.uk> 1.6-1fs
-- Bugfixes, migrated /tftpboot to /var/lib/tftpboot
-
-* Thu May 23 2002 Michael Brown <mbrown@fensystems.co.uk> 1.5-1fs
-- Now includes dhcpd.conf.etherboot.include
-- Automatically scans for all network modules in the pcimap file
-
-* Wed May 08 2002 Michael Brown <mbrown@fensystems.co.uk> 1.4-1fs
-- Bugfixes: tmpdir selection, linuxrc typos, ifconfig peculiarities
-
-* Sat May 04 2002 Michael Brown <mbrown@fensystems.co.uk> 1.3-1fs
-- During %make, LIBDIR must be set for mknbi
-- Added %post scriptlet since %trigger seems not to be being triggered...
-
-* Sat May 04 2002 Michael Brown <mbrown@fensystems.co.uk> 1.2-1fs
-- Added extra sources instead of requiring "make" to download them
-
-* Sat May 04 2002 Michael Brown <mbrown@fensystems.co.uk> 1.1-1fs
-- First attempt at an RPM package
-

contrib/initrd/mknbi-set

@@ -1,200 +0,0 @@
-#!/usr/bin/perl -w
-#
-# $Id$
-# Maintains set of NBIs based on currently-installed kernels
-# Network card module sets are taken from /etc/mknbi-set.conf
-
-use strict;
-use vars qw($verbosity);
-
-use constant EB_PCI_DEVICE => 1;
-
-# Utility function: calculate output id given a kernel file name and
-# space-separated list of modules
-sub calc_output_id ($$) {
-  my $kernel = shift;
-  my $moduleset = shift;
-  my $kernel_ver = "";
-  ( $kernel_ver ) = ( $kernel =~ /vmlinuz-(.*)$/ );
-  ( my $output_id = "$moduleset".( $kernel_ver ? ".$kernel_ver" : "" ) ) =~ tr/,/./;
-  return ( $kernel_ver, $output_id );
-}
-
-# Utility function: read modules.pcimap-style file
-# Add modules to modulesets hash, write out dhcpd.conf fragment
-sub read_config_file ($$$$) {
-  my $configfile = shift;
-  my $modulesets = shift;
-  my $dhcpfh = shift;
-  my $alwaysuse = shift;
-
-  print "Scanning through $configfile for network modules...\n" if $verbosity >= 1;
-  open CF, $configfile or die "Could not open $configfile: $!\n";
-  chomp ( my $tempmodule = `mktemp /tmp/mknbi-set.XXXXXX` );
-  chomp ( my $cwd = `pwd` ); chdir '/'; # Modprobe searches the current directory...
-  print $dhcpfh "    \# Generated from $configfile\n";
-  while (<CF>) {
-    chomp;
-    next if /^[\#;]/ or /^\s*$/;
-    ( my $module, undef, my $vendor, my $device ) = /^(\S+)(\s+(\S+)\s+(\S+))?/ ;
-    $modulesets->{$module} = 1 if $alwaysuse;
-    if ( ! exists $modulesets->{$module} ) {
-      # Check to see if module is a network module
-      # Only do this the first time we encounter a module
-      my @modulepaths = `/sbin/modprobe -l $module.o*` ;
-      chomp ( my $modulepath = $modulepaths[0] );
-      if ( $modulepath ) {
-	if ( $modulepath =~ /.o.gz$/ ) {
-	  system ( "zcat $modulepath > $tempmodule" );
-	} else {
-	  system ( "cp $modulepath $tempmodule" );
-	}
-	$modulesets->{$module} = 0;
-	foreach ( `nm $tempmodule` ) {
-	  chomp;
-	  $modulesets->{$module} = 1 if /(ether|wlan)/ ;
-	}
-	unlink $tempmodule;
-      } else {
-	print STDERR "Cannot locate module $module specified in $configfile\n";
-      }
-    }
-    if ( $modulesets->{$module} ) {
-      if ( $vendor ) {
-	print "$module ($vendor,$device) listed in $configfile\n" if $verbosity >= 2;
-	printf $dhcpfh ( "    if option etherboot.nic-dev-id = %02x:%02x:%02x:%02x:%02x { option etherboot.kmod \"%s\"; }\n",
-			 EB_PCI_DEVICE,
-			 ( hex($vendor) >> 8 ) & 0xff, hex($vendor) & 0xff,
-			 ( hex($device) >> 8 ) & 0xff, hex($device) & 0xff,
-			 $module );
-      } else {
-	print "$module (without PCI IDs) listed in $configfile\n" if $verbosity >= 2;
-      }
-    }
-  }
-  close CF;
-  print $dhcpfh "\n";
-  chdir $cwd;
-}
-
-my $conffile = '/etc/mknbi-set.conf';
-my $mkinitrd_net = 'mkinitrd-net';
-my $mknbi = 'mknbi-linux';
-my $output_dir = '/var/lib/tftpboot';
-my $dhcpfile = '/etc/dhcpd.conf.etherboot-pcimap.include';
-my $use_local;
-our $verbosity = 1;
-my $modulesets = {};
-my $kernel = '';
-my @kernels = ();
-
-my $usage="Usage: $0 [-l|--local] [-q] [-v] [-r|--refresh module[,module...]] [--help]";
-
-# Parse command-line options
-while ( $_ = shift ) {
-  if ( /-l|--local/ ) {
-    $conffile = 'mknbi-set.conf';
-    $mkinitrd_net = './mkinitrd-net';
-    $mknbi = './mknbi-linux --format=nbi --target=linux';
-    $output_dir = 'tftpboot';
-    $dhcpfile = 'tftpboot/dhcpd.conf.etherboot-pcimap.include';
-    $use_local = 1;
-  } elsif ( /-r|--refresh/ ) {
-    my $moduleset = shift;
-    $modulesets->{$moduleset} = 1;
-  } elsif ( /-k|--kernel/ ) {
-    $kernel = shift;
-  } elsif ( /-v|--verbose/ ) {
-    $verbosity++;
-  } elsif ( /-q|--quiet/ ) {
-    $verbosity--;
-  } elsif ( /--help/ ) {
-    die "$usage\n".
-	"  -k, --kernel   Build NBIs for a particular kernel\n".
-        "  -l, --local    Run locally from CVS (for developers only)\n".
-	"  -r, --refresh  Refresh NBI for a particular module\n".
-	"  -v, --verbose  Be more verbose\n".
-	"  -q, --quiet    Be less verbose\n";
-  } else {
-    die "$usage\n";
-  }
-}
-
-# Get set of current kernels
-if ($kernel) {
-  @kernels = ( $kernel );
-} else {
-  @kernels = glob('/boot/vmlinuz*');
-}
-die "Could not find any kernels in /boot\n" unless @kernels;
-
-# If modules have been specified via --refresh, do not scan for modules or rewrite the
-# dhcpd.conf fragment file
-unless ( %$modulesets ) {
-  # Write dhcpd.conf fragment file
-  open my $dhcpfh, ">$dhcpfile" or die "Could not open $dhcpfile for writing: $!\n";
-  print $dhcpfh "# Etherboot PCI ID -> Linux kernel module mapping file\n";
-  print $dhcpfh "# Generated by mknbi-set on ".(scalar localtime)."\n";
-  print $dhcpfh "#\n";
-  print $dhcpfh "if substring ( option vendor-class-identifier, 0, 9 ) = \"Etherboot\" {\n";
-  print $dhcpfh "  if exists etherboot.nic-dev-id {\n";
-  print $dhcpfh "    \# Legacy nic-dev-id mechanism: there are some DLink DFE538 cards in circulation that\n";
-  print $dhcpfh "    \# predated the change to the new nic-dev-id binary structure\n";
-  print $dhcpfh "    if option etherboot.nic-dev-id = \"PCI:1186:1300\" { option etherboot.kmod \"8139too\"; }\n";
-  print $dhcpfh "\n";
-
-  # Get set of network modules to build NBIs for
-  # Read explicitly-specified module sets from $conffile
-  read_config_file($conffile, $modulesets, $dhcpfh, 1);
-  # Obtain list of all network modules from pcimap file
-  my $pcimap;
-  foreach ( `/sbin/modprobe -c` ) {
-    $pcimap = $1 if /^pcimap.*?=(.*)$/;
-  }
-  if ( $pcimap ) {
-    read_config_file($pcimap, $modulesets, $dhcpfh, 0);
-  } else {
-    print STDERR "Could not identify pcimap file\n";
-  }
-  # Finish off dhcpd.conf fragment file
-  print $dhcpfh "  }\n}\n";
-  close $dhcpfh;
-}
-
-# Build initrd and nbi for each kernel-moduleset combination
-foreach my $moduleset ( sort keys %$modulesets ) {
-  next unless $modulesets->{$moduleset}; # Ignore if value is 0
-  print "Building NBIs for module set $moduleset\n" if $verbosity >= 1;
-  foreach my $kernel ( @kernels ) {
-    ( my $kernel_ver, my $output_id ) = calc_output_id ( $kernel, $moduleset );
-    if ( -l $kernel ) {
-      # Symbolic link; create matching symlink
-      my $real_kernel = readlink ( $kernel );
-      ( my $real_kernel_ver, my $real_output_id ) = calc_output_id ( $real_kernel, $moduleset );
-      print "Symlinking $output_id to $real_output_id\n" if $verbosity >= 2;
-      my $initrd_file = "$output_dir/initrd-$output_id.img";
-      unlink ( $initrd_file ) if -l $initrd_file;
-      system ( "ln -s initrd-$real_output_id.img $initrd_file" ) == 0 or print STDERR "Could not symlink $initrd_file to initrd-$real_output_id.img: $!\n";
-      my $nbi_file = "$output_dir/boot-$output_id.nbi";
-      unlink ( $nbi_file ) if -l $nbi_file;
-      system ( "ln -s boot-$real_output_id.nbi $nbi_file" ) == 0 or print STDERR "Could not symlink $nbi_file to boot-$real_output_id.nbi: $!\n";
-    } else {
-      # Real file: create initrd and nbi
-      print "Creating initrd and nbi for $output_id\n" if $verbosity >= 2;
-      ( my $moduleset_spaces = $moduleset ) =~ tr/,/ /;
-      my $initrd_cmd = "$mkinitrd_net --nolink ".
-	  ( $use_local ? "--local " : "" ).
-	      ( $kernel_ver ? "--kernel $kernel_ver " : "" ).
-		  ( $verbosity >= 2 ? "" : "-q " ).
-		      $moduleset_spaces;
-      print "$initrd_cmd\n" if $verbosity >= 3;
-      if ( system ( $initrd_cmd ) == 0 ) {
-	my $mknbi_cmd = "$mknbi $kernel $output_dir/initrd-$output_id.img > $output_dir/boot-$output_id.nbi";
-	print "$mknbi_cmd\n" if $verbosity >= 3;
-	system ( $mknbi_cmd ) == 0 or print STDERR "mknbi failed: $!\n";
-      } else {
-	print STDERR "$initrd_cmd failed: $!\n";
-      }
-    }
-  }
-}

contrib/initrd/mknbi-set.conf

@@ -1,27 +0,0 @@
-# This file specifies the network cards for which NBI images should be built
-# Each line contains a list of kernel modules to be used, separated by commas
-# You can optionally specify PCI vendor and device IDs that should be automatically
-# mapped to this module.
-#
-# The format is similar to modutils' modules.pcimap file.
-#
-# Examples:
-#   RTL8139-based ethernet card
-; 8139too
-#   RTL8139-based ethernet card with PCI IDs vendor=0x1186, device=0x1300
-; 8139too	0x1186	0x1300
-#   RTL8139 and Prism2_pci in same image
-; 8139too,prism2_pci
-
-# Some modules do not include the MODULE_DEVICE_TABLE macro, and so end up not
-# being listed in the pcimap file.  These modules are included here to force
-# the creation of corresponding initrds.
-prism2_pci	0x1260	0x3873
-prism2_plx	0x1638	0x1100
-prism2_plx	0x16ab	0x1101
-prism2_plx	0x16ab	0x1102
-prism2_plx	0x1385	0x4100
-prism2_plx	0x15e8	0x0130
-prism2_plx	0x16ec	0x3685
-prism2_plx	0x16ab	0x1102
-prism2_plx	0x15e8	0x0131

contrib/initrd/script.c.patch

@@ -1,11 +0,0 @@
---- script.c.orig	Tue Apr  2 23:49:33 2002
-+++ script.c	Wed Jun  5 14:17:22 2002
-@@ -179,7 +179,7 @@
- 	}
- 	if (packet->siaddr) {
- 		envp[j] = malloc(sizeof("siaddr=255.255.255.255"));
--		sprintip(envp[j++], "siaddr=", (unsigned char *) &packet->yiaddr);
-+		sprintip(envp[j++], "siaddr=", (unsigned char *) &packet->siaddr);
- 	}
- 	if (!(over & FILE_FIELD) && packet->file[0]) {
- 		/* watch out for invalid packets */

contrib/initrd/udhcpc-post

@@ -1,25 +0,0 @@
-#!/bin/sh
-# $Id$
-
-if [ "$1" = "deconfig" ]; then
-  ifconfig $interface 0.0.0.0 up
-else if [ "$1" = "bound" ] ; then
-    echo UDHCPC: I am $ip [$hostname], booting from $serverid
-    [ -n "$hostname" ] && echo $hostname > /proc/sys/kernel/hostname
-    [ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
-    [ -n "$subnet" ] && NETMASK="netmask $subnet" 
-    ifconfig $interface $ip $BROADCAST $NETMASK
-    route add default gw $router dev $interface
-    echo -n > /etc/resolv.conf
-    for i in $dns; do
-      echo nameserver $i >> /etc/resolv.conf
-    done
-    [ -n "$siaddr" ] || siaddr=$serverid
-    [ -n "$rootpath" ] || rootpath=$siaddr:/
-    echo Mounting root filesystem $rootpath at /sysroot
-    echo If this appears to hang, check that the server of $rootpath is able to
-    echo reverse-map my IP address $ip to obtain my hostname $hostname
-    mount -t nfs -o nolock,rsize=8192,wsize=8192 $rootpath /sysroot
-  fi
-fi
-

contrib/linux-2.0-transname.lsm

@@ -1,93 +0,0 @@
-Xref: news.nsw.CSIRO.AU comp.os.linux.announce:2827
-Path: news.nsw.CSIRO.AU!metro!metro!munnari.OZ.AU!news.ecn.uoknor.edu!news.wildstar.net!news.ececs.uc.edu!newsrelay.netins.net!newsfeed.dacom.co.kr!arclight.uoregon.edu!feed1.news.erols.com!howland.erols.net!newsfeed.internetmci.com!in3.uu.net!liw.clinet.fi!usenet
-From: schoebel@informatik.uni-stuttgart.de (Thomas Schoebel-Theuer)
-Newsgroups: comp.os.linux.announce
-Subject: linux-2.0.21-transname - Patch for easier pool administration
-Followup-To: comp.os.linux.misc
-Date: 30 Oct 1996 10:53:38 GMT
-Organization: Informatik, Uni Stuttgart, Germany
-Lines: 76
-Approved: linux-announce@news.ornl.gov (Lars Wirzenius)
-Message-ID: <pgpmoose.199610301253.4416@liw>
-NNTP-Posting-Host: liw
-X-Auth: PGPMoose V1.1 PGP comp.os.linux.announce
-	iQBVAwUBMnczrjiesvPHtqnBAQEO6gH/WRtFpTPyVtwi0cFVPZ1Xhn8cvfb6i3mk
-	LQY2kgpAPquP2TeXYWb5Ta3HxqK15pR1AgaEy5BmPS6+66ixZFvKRQ==
-	=hhea
-
------BEGIN PGP SIGNED MESSAGE-----
-
-linux-2.0.21-transname.patch enables diskless clients, X-terminals etc to
-mount the *root filesystem* of the server. This makes administration of
-large pools *a lot* easier.
-
-Currently different diskless clients must have their root "/" on different
-directories on the server, beause each client has _some_ different
-configuration files. However, most administration files (typically about 99%)
-have the same contents on the clients and on the server, but have to be
-(and maintained separately) just because of the 1% differences.
-
-This duplication causes very large efforts in practice, since at least
-the /etc directory has to be duplicated for every client. Even in /etc
-many files are identical, for example sendmail.cf, initrc scripts and
-others. Maintaining a large pool means to ensure coherence amoung the
-duplicates. Classical methods like symlinks are unconvenient
-for this task because they have to be valid in the view of mounted
-filesystems at the client, not at the server.
-
-linux-2.0-transname.patch overcomes this problem by allowing filenames
-to be context-dependend. For example, if you have a file "/etc/config"
-that should differ on the hosts "myserver" and "myclient", you just
-create two different files named "/etc/config#host=myserver#" and
-"/etc/config#host=myclient#". On host "myserver", the file
-"/etc/config#host=myserver#" will appear as if it were hardlinked to
-file "/etc/config" (without the #...=...# suffix). On host "myclient",
-the corresponding other file will appear as "/etc/config". So you
-can access the right file contents under the same name, depending
-on which host you are.
-
-As a result, you may use different contexts for e.g. /etc/fstab, but
-have one shared /etc/passwd for all pool machines. So you don't need
-yp or NYS any more.
-
-The kernel patch was developped for and is used at our Linux pool at the
-University of Stuttgart with good results. Maintainance of the pool is
-at a minimum, and adding new clients is a child's play. No worry with
-keeping up mail configurations, newly installed tools, changed /etc/services,
-/etc/shells, /etc/resolv.conf and many, many others. In contrast to a
-sophisticated symlink solution, adding a new file to the /etc directory
-is seen immediately by all clients. I never had less trouble with
-administration before.
-
-I just uploaded the patch to
-  ftp://ftp.lmh.ox.ac.uk
-         where it should appear in /pub/linux-kernel-patch-archive/
-and also to
-  ftp://sunsite.unc.edu/pub/Linux/Incoming/
-         where it should be moved to /pub/Linux/kernel/patches/misc/ soon.
-
-More details can be found in the README there, and also in the
-configure-help.
-
-Enjoy,
-
-- -- Thomas
-
-
------BEGIN PGP SIGNATURE-----
-Version: 2.6.3i
-Charset: noconv
-
-iQCVAwUBMnczhYQRll5MupLRAQHzuwP9HGYa4I3bZpt22Y3oQIwEKZGfvnaS5AaD
-fVG8wOQ/T7Nrant9JtTktsTVlxGVlYVnziRY4c0ew2qExapK9FqY/ItN0NJXy5aT
-a4eSkn86rp6Un7m90RK1xVY5AyVAq49Rdw2StGxr7uj+davnmg3Np+U0MiAILq91
-52jKGaR3fvc=
-=LSD6
------END PGP SIGNATURE-----
-
-This article has been digitally signed by the moderator, using PGP.
-http://www.iki.fi/liw/lars-public-key.asc has PGP key for validating signature.
-Send submissions for comp.os.linux.announce to: linux-announce@news.ornl.gov
-PLEASE remember a short description of the software and the LOCATION.
-This group is archived at http://www.iki.fi/liw/linux/cola.html

contrib/linux-3c503-patch/3c503.patch

@@ -1,24 +0,0 @@
-diff -Naur linux.orig/drivers/net/3c503.c linux/drivers/net/3c503.c
---- linux.orig/drivers/net/3c503.c	Thu Feb 19 23:14:04 1998
-+++ linux/drivers/net/3c503.c	Thu Feb 19 23:16:24 1998
-@@ -179,7 +179,8 @@
-        for both the old and new 3Com prefix */
-     outb(ECNTRL_SAPROM|ECNTRL_THIN, ioaddr + 0x406);
-     vendor_id = inb(ioaddr)*0x10000 + inb(ioaddr + 1)*0x100 + inb(ioaddr + 2);
--    if ((vendor_id != OLD_3COM_ID) && (vendor_id != NEW_3COM_ID)) {
-+    if ((vendor_id != OLD_3COM_ID) && (vendor_id != NEW_3COM_ID) &&
-+    	(vendor_id != BULL_3COM_ID)) {
- 	/* Restore the register we frobbed. */
- 	outb(saved_406, ioaddr + 0x406);
- 	return ENODEV;
-diff -Naur linux.orig/drivers/net/3c503.h linux/drivers/net/3c503.h
---- linux.orig/drivers/net/3c503.h	Thu Feb 19 23:14:05 1998
-+++ linux/drivers/net/3c503.h	Mon Feb 16 11:41:56 1998
-@@ -11,6 +11,7 @@
- 
- #define OLD_3COM_ID	0x02608c
- #define NEW_3COM_ID	0x0020af
-+#define BULL_3COM_ID	0x000062
- 
- /* Shared memory management parameters. NB: The 8 bit cards have only
-    one bank (MB1) which serves both Tx and Rx packet space. The 16bit

contrib/linux-3c503-patch/README

@@ -1,7 +0,0 @@
-As part of determining whether a 3c503 is present, the Linux driver
-examines the first 3 bytes of the ethernet address (the vendor ID)
-to see if it corresponds to a known 3Com vendor ID.
-
-The Bull discless 386 workstation I have (don't laugh) has an
-unknown vendor ID 0x000062. This trivial patch adds it to those
-known to the driver.

contrib/mini-slamd/COPYING

@@ -1,339 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                          675 Mass Ave, Cambridge, MA 02139, USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	Appendix: How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) 19yy  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) 19yy name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.

contrib/mini-slamd/Makefile

@@ -1,8 +0,0 @@
-CC=gcc
-CFLAGS=-Wall -O2
-
-mini-slamd: mini-slamd.c
-	$(CC) $(CFLAGS) -o $@ $<
-
-clean:
-	rm -f mini-slamd

contrib/mini-slamd/mini-slamd.c

@@ -1,521 +0,0 @@
-/*
- * mini-slamd
- * (c) 2002 Eric Biederman
- */
-
-#include <string.h>
-#include <errno.h>
-#include <stdio.h>
-#include <stdint.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/poll.h>
-#include <sys/socket.h>
-#include <sys/stat.h>
-#include <netinet/ip.h>
-#include <netinet/in.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <arpa/inet.h>
-
-/*
- * To specify the default interface for multicast packets use:
- * route add -net 224.0.0.0 netmask 240.0.0.0 dev eth1
- * This server is stupid and does not override the default.
- */
-
-/* Sever states.
- *
- * Waiting for clients.
- * Sending data to clients.
- * Pinging clients for data.
- *
- */
-#define SLAM_PORT 10000
-#define SLAM_MULTICAST_IP ((239<<24)|(255<<16)|(1<<8)|(1<<0))
-#define SLAM_MULTICAST_PORT 10000
-#define SLAM_MULTICAST_TTL 1
-#define SLAM_MULTICAST_LOOPBACK 1
-#define SLAM_MAX_CLIENTS 10
-
-#define SLAM_PING_TIMEOUT	100 /* ms */
-
-/*** Packets Formats ***
- * Data Packet:
- *   transaction
- *   total bytes
- *   block size
- *   packet #
- *   data
- *
- * Status Request Packet
- *   transaction
- *   total bytes
- *   block packets
- *
- * Status Packet
- *   received packets
- *   requested packets
- *   received packets
- *   requested packets
- *   ...
- *   received packets
- *   requested packtes
- *   0
- */
-
-#define MAX_HDR (7 + 7 + 7) /* transaction, total size, block size */
-#define MIN_HDR (1 + 1 + 1) /* transaction, total size, block size */
-
-#define MAX_DATA_HDR (MAX_HDR + 7) /* header, packet # */
-#define MIN_DATA_HDR (MAX_HDR + 1) /* header, packet # */
-
-/* ETH_MAX_MTU 1500 - sizeof(iphdr) 20  - sizeof(udphdr) 8 = 1472 */
-#define SLAM_MAX_NACK		(1500 - (20 + 8))
-/* ETH_MAX_MTU 1500 - sizeof(iphdr) 20  - sizeof(udphdr) 8 - MAX_HDR = 1451 */
-#define SLAM_BLOCK_SIZE		(1500 - (20 + 8 + MAX_HDR))
-
-
-/* Define how many debug messages you want 
- * 1 - sparse but useful
- * 2 - everything
- */
-#ifndef DEBUG
-#define DEBUG 0
-#endif
-
-static int slam_encode(
-	unsigned char **ptr, unsigned char *end, unsigned long value)
-{
-	unsigned char *data = *ptr;
-	int bytes;
-	bytes = sizeof(value);
-	while ((bytes > 0) && ((0xff & (value >> ((bytes -1)<<3))) == 0)) {
-		bytes--;
-	}
-	if (bytes <= 0) {
-		bytes = 1;
-	}
-	if (data + bytes >= end) {
-		return -1;
-	}
-	if ((0xe0 & (value >> ((bytes -1)<<3))) == 0) {
-		/* packed together */
-		*data = (bytes << 5) | (value >> ((bytes -1)<<3));
-	} else {
-		bytes++;
-		*data = (bytes << 5);
-	}
-	bytes--;
-	data++;
-	while(bytes) {
-		*(data++) = 0xff & (value >> ((bytes -1)<<3));
-		bytes--;
-	}
-	*ptr = data;
-	return 0;
-}
-
-static unsigned long slam_decode(unsigned char **ptr, unsigned char *end, int *err)
-{
-	unsigned long value;
-	unsigned bytes;
-	if (*ptr >= end) {
-		*err = -1;
-	}
-	bytes = ((**ptr) >> 5) & 7;
-	if ((bytes == 0) || (bytes > sizeof(unsigned long))) {
-		*err = -1;
-		return 0;
-	}
-	if ((*ptr) + bytes >= end) {
-		*err =  -1;
-	}
-	value = (**ptr) & 0x1f;
-	bytes--;
-	(*ptr)++;
-	while(bytes) {
-		value <<= 8;
-		value |= **ptr;
-		(*ptr)++;
-		bytes--;
-	}
-	return value;
-}
-
-
-static struct sockaddr_in client[SLAM_MAX_CLIENTS];
-static int clients;
-
-
-void del_client(struct sockaddr_in *old)
-{
-	int i;
-	for(i = 0; i < clients; i++) {
-		if ((client[i].sin_family == old->sin_family) &&
-			(client[i].sin_addr.s_addr == old->sin_addr.s_addr) &&
-			(client[i].sin_port == old->sin_port)) {
-			memmove(&client[i], &client[i+1],
-				(clients - (i+1))*sizeof(client[0]));
-			clients--;
-		}
-	}
-}
-
-void add_client(struct sockaddr_in *new)
-{
-	del_client(new);
-	if (clients >= SLAM_MAX_CLIENTS)
-		return;
-	memcpy(&client[clients], new, sizeof(*new));
-	clients++;
-}
-
-void push_client(struct sockaddr_in *new)
-{
-	del_client(new);
-	if (clients >= SLAM_MAX_CLIENTS) {
-		clients--;
-	}
-	memmove(&client[1], &client[0], clients*sizeof(*new));
-	memcpy(&client[0], new, sizeof(*new));
-	clients++;
-}
-
-
-void next_client(struct sockaddr_in *next)
-{
-	/* Find the next client we want to ping next */
-	if (!clients) {
-		next->sin_family = AF_UNSPEC;
-		return;
-	}
-	/* Return the first client */
-	memcpy(next, &client[0], sizeof(*next));
-}
-
-int main(int argc, char **argv)
-{
-	char *filename;
-	uint8_t nack_packet[SLAM_MAX_NACK];
-	int nack_len;
-	uint8_t request_packet[MAX_HDR];
-	int request_len;
-	uint8_t data_packet[MAX_DATA_HDR +  SLAM_BLOCK_SIZE];
-	int data_len;
-	uint8_t *ptr, *end;
-	struct sockaddr_in master_client;
-	struct sockaddr_in sa_src;
-	struct sockaddr_in sa_mcast;
-	uint8_t mcast_ttl;
-	uint8_t mcast_loop;
-	int sockfd, filefd;
-	int result;
-	struct pollfd fds[1];
-	int state;
-#define STATE_PINGING      1
-#define STATE_WAITING      2
-#define STATE_RECEIVING    3
-#define STATE_TRANSMITTING 4
-	off_t size;
-	struct stat st;
-	uint64_t transaction;
-	unsigned long packet;
-	unsigned long packet_count;
-	unsigned slam_port, slam_multicast_port;
-	struct in_addr slam_multicast_ip;
-
-	slam_port = SLAM_PORT;
-	slam_multicast_port = SLAM_MULTICAST_PORT;
-	slam_multicast_ip.s_addr = htonl(SLAM_MULTICAST_IP);
-	
-	if (argc != 2) {
-		fprintf(stderr, "Bad argument count\n");
-		fprintf(stderr, "Usage: mini-slamd filename\n");
-		exit(EXIT_FAILURE);
-	}
-	filename = argv[1];
-	filefd = -1;
-	size = 0;
-	transaction = 0;
-
-	/* Setup the udp socket */
-	sockfd = socket(PF_INET, SOCK_DGRAM, 0);
-	if (sockfd < 0) {
-		fprintf(stderr, "Cannot create socket\n");
-		exit(EXIT_FAILURE);
-	}
-	memset(&sa_src, 0, sizeof(sa_src));
-	sa_src.sin_family = AF_INET;
-	sa_src.sin_port = htons(slam_port);
-	sa_src.sin_addr.s_addr = INADDR_ANY;
-
-	result = bind(sockfd, &sa_src, sizeof(sa_src));
-	if (result < 0) { 
-		fprintf(stderr, "Cannot bind socket to port %d\n", 
-			ntohs(sa_src.sin_port));
-		exit(EXIT_FAILURE);
-	}
-
-	/* Setup the multicast transmission address */
-	memset(&sa_mcast, 0, sizeof(sa_mcast));
-	sa_mcast.sin_family = AF_INET;
-	sa_mcast.sin_port = htons(slam_multicast_port);
-	sa_mcast.sin_addr.s_addr = slam_multicast_ip.s_addr;
-	if (!IN_MULTICAST(ntohl(sa_mcast.sin_addr.s_addr))) {
-		fprintf(stderr, "Not a multicast ip\n");
-		exit(EXIT_FAILURE);
-	}
-
-	/* Set the multicast ttl */
-	mcast_ttl = SLAM_MULTICAST_TTL;
-	setsockopt(sockfd, IPPROTO_IP, IP_MULTICAST_TTL,
-		&mcast_ttl, sizeof(mcast_ttl));
-
-	/* Set the multicast loopback status */
-	mcast_loop = SLAM_MULTICAST_LOOPBACK;
-	setsockopt(sockfd, IPPROTO_IP, IP_MULTICAST_LOOP, &mcast_loop, sizeof(mcast_loop));
-
-
-	state = STATE_WAITING;
-	packet = 0;
-	packet_count = 0;
-	fds[0].fd = sockfd;
-	fds[0].events = POLLIN;
-	fds[0].revents = 0;
-	for(;;) {
-		switch(state) {
-		case STATE_PINGING:
-			state = STATE_WAITING;
-			next_client(&master_client);
-			if (master_client.sin_family == AF_UNSPEC) {
-				break;
-			}
-#if DEBUG
-			printf("Pinging %s:%d\n", 
-				inet_ntoa(master_client.sin_addr),
-				ntohs(master_client.sin_port));
-			fflush(stdout);
-#endif
-
-			/* Prepare the request packet, it is all header */
-			ptr = request_packet;
-			end = &request_packet[sizeof(request_packet) -1];
-			slam_encode(&ptr, end, transaction);
-			slam_encode(&ptr, end, size);
-			slam_encode(&ptr, end, SLAM_BLOCK_SIZE);
-			request_len = ptr - request_packet;
-
-			result = sendto(sockfd, request_packet, request_len, 0,
-				&master_client, sizeof(master_client));
-			/* Forget the client I just asked, when the reply
-			 * comes in we will remember it again.
-			 */
-			del_client(&master_client);
-			break;
-		case STATE_WAITING:
-		{
-			int timeout;
-			int from_len;
-			timeout = -1;
-			if (master_client.sin_family != AF_UNSPEC) {
-				timeout = SLAM_PING_TIMEOUT;
-			}
-			result = poll(fds, sizeof(fds)/sizeof(fds[0]), timeout);
-			if (result == 0) {
-				/* On a timeout try the next client */
-				state = STATE_PINGING;
-				break;
-			}
-			if (result > 0) {
-				from_len = sizeof(master_client);
-				result = recvfrom(sockfd, 
-					nack_packet, 	sizeof(nack_packet), 0,
-					&master_client, &from_len);
-				if (result < 0)
-					break;
-				nack_len = result;
-#if DEBUG
-				printf("Received Nack from %s:%d\n",
-					inet_ntoa(master_client.sin_addr),
-					ntohs(master_client.sin_port));
-				fflush(stdout);
-#endif
-#if DEBUG
-				{
-					ptr = nack_packet;
-					end = ptr + result;
-					packet = 0;
-					result = 0;
-					while(ptr < end) {
-						packet += slam_decode(&ptr, end, &result);
-						if (result < 0) break;
-						packet_count = slam_decode(&ptr, end, &result);
-						if (result < 0) break;
-						printf("%d-%d ",
-							packet, packet + packet_count -1);
-					}
-					printf("\n");
-					fflush(stdout);
-				}
-#endif
-				/* Forget this client temporarily.
-				 * If the packet appears good they will be
-				 * readded.
-				 */
-				del_client(&master_client);
-				ptr = nack_packet;
-				end = ptr + nack_len;
-				result = 0;
-				packet = slam_decode(&ptr, end, &result);
-				if (result < 0)
-					break;
-				packet_count = slam_decode(&ptr, end, &result);
-				if (result < 0)
-					break;
-				/* We appear to have a good packet, keep
-				 * this client.
-				 */
-				push_client(&master_client);
-
-				/* Reopen the file to transmit */
-				if (filefd != -1) {
-					close(filefd);
-				}
-				filefd = open(filename, O_RDONLY);
-				if (filefd < 0) {
-					fprintf(stderr, "Cannot open %s: %s\n",
-						filename, strerror(errno));
-					break;
-				}
-				size = lseek(filefd, 0, SEEK_END);
-				if (size < 0) {
-					fprintf(stderr, "Seek failed on %s: %s\n",
-						filename, strerror(errno));
-					break;
-				}
-				result = fstat(filefd, &st);
-				if (result < 0) {
-					fprintf(stderr, "Stat failed on %s: %s\n",
-						filename, strerror(errno));
-					break;
-				}
-				transaction = st.st_mtime;
-				
-				state = STATE_TRANSMITTING;
-				break;
-			}
-			break;
-		}
-		case STATE_RECEIVING:
-			/* Now clear the queue of received packets */
-		{
-			struct sockaddr_in from;
-			int from_len;
-			uint8_t dummy_packet[SLAM_MAX_NACK];
-			state = STATE_TRANSMITTING;
-			result = poll(fds, sizeof(fds)/sizeof(fds[0]), 0);
-			if (result < 1)
-				break;
-			from_len = sizeof(from);
-			result = recvfrom(sockfd, 
-				dummy_packet, sizeof(dummy_packet), 0,
-				&from, &from_len);
-			if (result <= 0)
-				break;
-#if DEBUG				
-			printf("Received Nack from %s:%d\n",
-				inet_ntoa(from.sin_addr),
-				ntohs(from.sin_port));
-			fflush(stdout);
-#endif
-			/* Receive packets until I don't get any more */
-			state = STATE_RECEIVING;
-			/* Process a  packet */
-			if (dummy_packet[0] == '\0') {
-				/* If the first byte is null it is a disconnect
-				 * packet.  
-				 */
-				del_client(&from);
-			}
-			else {
-				/* Otherwise attempt to add the client. */
-				add_client(&from);
-			}
-			break;
-		}
-		case STATE_TRANSMITTING:
-		{
-			off_t off;
-			off_t offset;
-			ssize_t bytes;
-			uint8_t *ptr2, *end2;
-
-			/* After I transmit a packet check for packets to receive. */
-			state = STATE_RECEIVING;
-
-			/* Find the packet to transmit */
-			offset = packet * SLAM_BLOCK_SIZE;
-
-			/* Seek to the desired packet */
-			off = lseek(filefd, offset, SEEK_SET);
-			if ((off < 0) || (off != offset)) {
-		 		fprintf(stderr, "Seek failed on %s:%s\n",
-					filename, strerror(errno));
-				break;
-			}
-			/* Encode the packet header */
-			ptr2 = data_packet;
-			end2 = data_packet + sizeof(data_packet);
-			slam_encode(&ptr2, end2, transaction);
-			slam_encode(&ptr2, end2, size);
-			slam_encode(&ptr2, end2, SLAM_BLOCK_SIZE);
-			slam_encode(&ptr2, end2, packet);
-			data_len = ptr2 - data_packet;
-			
-			/* Read in the data */
-			bytes = read(filefd, &data_packet[data_len], 
-				SLAM_BLOCK_SIZE);
-			if (bytes <= 0) {
-				fprintf(stderr, "Read failed on %s:%s\n",
-					filename, strerror(errno));
-				break;
-			}
-			data_len += bytes;
-			/* Write out the data */
-			result = sendto(sockfd, data_packet, data_len, 0,
-				&sa_mcast, sizeof(sa_mcast));
-			if (result != data_len) {
-				fprintf(stderr, "Send failed %s\n",
-					strerror(errno));
-				break;
-			}
-#if DEBUG > 1
-			printf("Transmitted: %d\n", packet);
-			fflush(stdout);
-#endif
-			/* Compute the next packet */
-			packet++;
-			packet_count--;
-			if (packet_count == 0) {
-				packet += slam_decode(&ptr, end, &result);
-				if (result >= 0)
-					packet_count = slam_decode(&ptr, end, &result);
-				if (result < 0) {
-					/* When a transmission is done close the file,
-					 * so it may be updated.  And then ping then start
-					 * pinging clients to get the transmission started
-					 * again.
-					 */
-					state = STATE_PINGING;
-					close(filefd);
-					filefd = -1;
-					break;
-				}
-			}
-			break;
-		}
-		}
-	}
-	return EXIT_SUCCESS;
-}

contrib/mkQNXnbi/Makefile

@@ -1,10 +0,0 @@
-# Makefile for the mkQNXnbi filter
-
-all:		mkQNXnbi
-
-mkQNXnbi:	mkQNXnbi.o
-
-mkQNXnbi.o:	mkQNXnbi.c
-
-clean:
-	rm -f mkQNXnbi *.o 

contrib/mkQNXnbi/README

@@ -1,36 +0,0 @@
-mkQNXnbi is a quick hack to generate tagged images from QNX boot images.
-
-To boot a QNX client with Etherboot you have to consider the following:
-1. You MUST have another QNX box running in the network to provide the
-   root filesystem and the license info to the client. QNX cannot use
-   e.g. NFS for its root filesystem, as it needs to load a valid license
-   from a file on the root fs before being able to start TCP/IP. This
-   would lead to a chicken-and-egg problem.
-2. The Net task normally determines the size of its internal tables from
-   the actual number of licensed nodes. Since this information is not
-   available at boot time when booting from the network, you will have
-   to set the max. number of nodes as well as a valid netmap entry for
-   the node providing the root filesystem as an option to Net in the
-   build file.
-   See examples/ws.etherboot and fill in the <blanks>.
-3. The client does not need a TCP/IP license in order to boot.
-4. You can use the boot-server OS of your choice. If you choose to use
-   QNX as boot server, the server of course needs a TCP/IP run-time
-   license.  In this case you have the option of creating the boot image
-   on-the-fly and use the macro $(netmap) instead of a hard-coded MAC
-   address.
-   See examples/ws.etherboot.on-the-fly and fill in the <blanks>.
-   A template bootptab for the QNX bootp server is placed in the
-   examples directory.
-5. mkQNXnbi expects the QNX image to be supplied on stdin and generates
-   the tagged image to stdout. This can be overridden on the command line
-   using the options -i <input-file> and -o <output-file>.
-
-mkQNXnbi can be compiled using e.g. Linux/gcc or on QNX using Watcom C
-(or gcc, if you have it - see http://w3c.teaser.fr/~jcmichot/)
-
-Bug-reports to <al@alarsen.net>
-
-2002-01-25
-Anders Larsen
-<al@alarsen.net>

contrib/mkQNXnbi/examples/bootptab

@@ -1,29 +0,0 @@
-# /etc/bootptab: database for QNX bootp server (/etc/bootpd)
-
-# First, we define a global entry which specifies the stuff every host uses.
-global:\
-  :hd=/boot:\
-  :ht=ethernet:\
-  :sm=<your netmask here>:\
-  :bf=|cd /boot; buildqnx -b 0x10000 build/<your build-file here> | mkQNXnbi:\
-  :hn:
-
-# node 2 uses the default build-file
-node2:\
-  :tc=global:\
-  :ha=<your MAC here>:\
-  :ip=<your IP address here>:
-
-# node 3 uses its own build-file
-node3:\
-  :tc=global:\
-  :ha=<your MAC here>:\
-  :ip=<your IP address here>:\
-  :bf=|cd /boot; buildqnx -b 0x10000 build/<your build-file here> | mkQNXnbi:
-
-# node 4 uses a pre-built boot image
-node3:\
-  :tc=global:\
-  :ha=<your MAC here>:\
-  :ip=<your IP address here>:\
-  :bf=images/<your image-file here>:

contrib/mkQNXnbi/examples/ws.etherboot

@@ -1,22 +0,0 @@
-# /boot/build/ws.etherboot
-
-sys/boot
-$ boot -v
-
-sys/Proc32
-$ Proc32 -l <target node number>
-
-sys/Slib32
-$ Slib32
-
-sys/Slib16
-$ Slib16
-
-/bin/Net
-$ Net -n <highest QNX node number in network> -m "<node number of boot server> 1 <MAC of boot server node here>"
-
-/bin/Net.<network driver>
-$ Net.<network driver>
-
-/bin/sinit
-$ sinit -r //<node number of boot server>/ TERM=<your terminal emulation {QNX|qansi}>

contrib/mkQNXnbi/examples/ws.etherboot.on-the-fly

@@ -1,22 +0,0 @@
-# /boot/build/ws.etherboot.on-the-fly
-
-sys/boot
-$ boot -v
-
-sys/Proc32
-$ Proc32 -l $(lnode)
-
-sys/Slib32
-$ Slib32
-
-sys/Slib16
-$ Slib16
-
-/bin/Net
-$ Net -n <highest QNX node number in network> -m $(netmap)
-
-/bin/Net.<network driver>
-$ Net.<network driver>
-
-/bin/sinit
-$ sinit -r //$(bnode)/ TERM=<your terminal emulation {QNX|qansi}>

contrib/mkQNXnbi/mkQNXnbi.c

@@ -1,196 +0,0 @@
-//*****************************************************************************
-//
-//      Purpose:        Make a boot-image for EtherBoot
-//
-//
-//      Compiler:       This source can be compiled with gcc and Watcom C
-//
-//
-//      Note:           The QNX boot image can be build with any reasonable
-//                      start address, e.g. 0x1000 (default) or 0x10000
-//                      (widespread Boot-Rom address)
-//
-//
-//      Author:         Anders Larsen
-//
-//
-//      Copyright:      (C) 1999 by
-//
-//                      Anders Larsen
-//                      systems engineer
-//                      Gutleuthausstr. 3
-//                      D-69469 Weinheim
-//                      Germany
-//                      phone:  +49-6201-961717
-//                      fax:    +49-6201-961718
-//                      e-mail: al@alarsen.net
-//
-//      This program is free software; you can redistribute it and/or modify
-//      it under the terms of the GNU General Public License as published by
-//      the Free Software Foundation; either version 2 of the License, or
-//      (at your option) any later version.
-//
-//      This program is distributed in the hope that it will be useful,
-//      but WITHOUT ANY WARRANTY; without even the implied warranty of
-//      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-//      GNU General Public License for more details.
-//
-//      You should have received a copy of the GNU General Public License
-//      along with this program; if not, write to the Free Software
-//      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-//
-//-----------------------------------------------------------------------------
-//
-//      Change Log:
-//        V0.2: Sun 1999-12-13 Anders Larsen <al@alarsen.net>
-//*****************************************************************************
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-
-
-// max. size of QNX OS boot image is 512K
-#define MAXSIZE (512*1024)
-
-typedef unsigned short ushort_t;
-typedef unsigned long  ulong_t;
-
-
-// global header of tagged image:
-struct initial_t
-{
-  ulong_t magic;
-  ulong_t length;
-  ulong_t location;
-  ulong_t start;
-};
-
-
-// header of each image:
-struct header_t
-{
-  ulong_t flags;
-  ulong_t loadaddr;
-  ulong_t imgsize;
-  ulong_t memsize;
-};
-
-
-// global header of the QNX EtherBoot image:
-struct qnx_loader_t
-{
-  struct initial_t setup;
-  struct header_t  qnx;
-};
-
-
-// global header:
-union
-{
-  struct qnx_loader_t h;
-  char                filler[512];
-} header;
-
-
-char buffer[MAXSIZE];
-
-
-int usage( char* const* argv )
-{
-  fprintf( stderr, "%s - make a tagged boot image for EtherBoot\n", *argv );
-  fprintf( stderr, "\nuse:\n" );
-  fprintf( stderr, "%s [ -<option> ]*\n", *argv );
-  fprintf( stderr, "\noptions:\n" );
-  fprintf( stderr, "  i <input file>  : QNX boot file     (default: stdin)\n" );
-  fprintf( stderr, "  o <output file> : tagged image file (default: stdout)\n" );
-  fprintf( stderr, "  v               : be verbose\n" );
-  return EXIT_FAILURE;
-}
-
-#ifdef __USAGE
-%C - make a tagged boot image for EtherBoot
-
-use:
-%C [ -<option> ]* 
-
-options:
-  i <input file>  : QNX boot file     (default: stdin)
-  o <output file> : tagged image file (default: stdout)
-  v               : be verbose
-#endif
-
-
-int main( int argc, char* const* argv )
-{
-  int ch, l;
-  int verbose = 0;
-
-  while ( ( ch = getopt( argc, argv, "hi:o:v" ) ) != EOF )
-    switch ( ch )
-    {
-      case 'i':
-        if ( !freopen( optarg, "r", stdin ) )
-        {
-          perror( "can't open input file" );
-          return EXIT_FAILURE;
-        }
-        break;
-
-      case 'o':
-        if ( !freopen( optarg, "w", stdout ) )
-        {
-          perror( "can't create output file" );
-          return EXIT_FAILURE;
-        }
-        break;
-
-      case 'v':
-        verbose++;
-        break;
-
-      case 'h':
-      default:
-        return usage( argv );
-    }
-  if ( optind != argc )
-    return usage( argv );
-
-  memset( &header, 0, sizeof header );
-  header.h.setup.magic     = 0x1b031336;    // magic number
-  header.h.setup.length    =          4;
-  header.h.setup.location  = 0x93e00000;    // just below the EtherBoot rom
-  header.h.setup.start     =          0;    // filled in dynamically
-  header.h.qnx.flags       = 0x04000004;    // single image only
-  header.h.qnx.loadaddr    =          0;    // filled in dynamically
-  header.h.qnx.imgsize     =          0;    // filled in dynamically
-  header.h.qnx.memsize     =          0;    // filled in dynamically
-
-  // read the QNX image from stdin:
-  for ( ; ( l = fread( buffer + header.h.qnx.imgsize, 1, 1024, stdin ) ) > 0;
-        header.h.qnx.imgsize += l
-      )
-    ;
-  header.h.qnx.memsize = header.h.qnx.imgsize;
-
-  // fill in the real load-address of the QNX boot image:
-  header.h.setup.start  = *(ushort_t*)&buffer[10] << 16;
-  header.h.qnx.loadaddr = *(ushort_t*)&buffer[10] <<  4;
-
-  // write the tagged image file to stdout:
-  fwrite( &header, 1, 512, stdout );
-  fwrite( buffer, 1, header.h.qnx.imgsize, stdout );
-
-  if ( verbose )
-  {
-    // print diagnostic information:
-    fprintf( stderr, "QNX image size: %d bytes (%dK), load addr: 0x%05X\n",
-             header.h.qnx.imgsize,
-             header.h.qnx.imgsize / 1024,
-             header.h.qnx.loadaddr
-           );
-  }
-  return EXIT_SUCCESS;
-}

contrib/mkffwnb/2.0.10/linuxrc

@@ -1,76 +0,0 @@
-#!/bin/sh
-#
-# floppyfw initfile
-#
-# nicked from:
-# hal91's initfile (/linuxrc), the bootup script of the system
-#
-
-VERSION=2.1.6
-
-load_fsmod () {
-	case $1 in
-	/dev/hd*)
-		insmod ide-cd
-		insmod cdrom
-		;;
-	esac
-	case $2 in
-	vfat)
-		echo vfat support is builtin
-		;;
-	iso9660)
-		insmod isofs
-		;;
-	esac
-}
-
-#
-/bin/busybox echo "Booting floppyfw" 
-
-PATH="/bin:/sbin:/usr/bin:/usr/sbin"
-#PATH="/bin"
-TERM=linux
-ignoreeof=10
-no_exit_on_failed_exec=yes
-export PATH TERM ignoreeof
-umask 022
-
-/bin/busybox echo "mounting: proc"
-/bin/busybox mount -t proc /proc /proc
-
-/bin/busybox echo "Generating links. (Thanks to busybox.lineo.com)"
-/bin/busybox --install -s
-
-echo "Generated"
-
-# Modified by Gem, based on coyote distro, changes by Ken Yap
-ROOTDEV=`sed -e 's/$/ /' -e 's/.*root=\([^ ]*\) .*/\1/' -e 's/,/ /g' -e 's:/dev/nfs:/dev/fd0:' /proc/cmdline`
-set -- $ROOTDEV
-# Backward compatibility with a single device argument
-if [ $# -eq 1 ]
-then
-	set -- $1 vfat
-fi
-while [ "$1" -a "$2" ]
-do
-	echo "attempting to mount $1 ($2)"
-	load_fsmod $1 $2
-	if mount -t $2 $1 /mnt/tmp
-	then
-		echo "mounted $1 on /mnt/tmp"
-		break
-	fi
-	shift; shift
-done
-
-[ -f /mnt/tmp/floppyfw/floppyfw.ini ] && cat /mnt/tmp/floppyfw/floppyfw.ini \
-| tr -d '\015' >/floppyfw.ini
-
-[ -f /floppyfw.ini ] && chmod 777 /floppyfw.ini
-[ -f /floppyfw.ini ] && exec /floppyfw.ini
-
-echo
-echo "** floppyfw.ini failed.. starting a shell"
-echo
-exec sh

contrib/mkffwnb/Extendinitrd.pm

@@ -1,43 +0,0 @@
-#!/usr/bin/perl -w
-
-sub status_system ($$) {
-	my ($command, $message) = @_;
-
-	$status = system($command);
-	$status <<= 8;
-	if ($status < 0) {
-		print STDERR "$!\n";
-	}
-	if ($status != 0) {
-		print STDERR "$message\n";
-	}
-}
-
-sub extendinitrd ($$) {
-	my ($initrd, $nblocks) = @_;
-
-	if ($nblocks <= 1440) {
-		print STDERR "nblocks must be >= 1440\n";
-		return (1);
-	}
-	(undef, $type, undef, $fnlen, undef)  = split(' ', `file $initrd`, 5);
-	print "$type $fnlen\n";
-	if ($type ne 'Minix' || $fnlen != 30) {
-		die "Can only handle Minix initrds with 30 char filenames\n";
-		return (1);
-	}
-	status_system("dd if=/dev/zero of=newinitrd bs=1k count=$nblocks", "Cannot create new initrd\n");
-	status_system("mkfs.minix -n 30 newinitrd $nblocks", "Cannot mkfs.minix new initrd\n");
-	mkdir("initrd.from") || print STDERR "Cannot make temp mount point initrd.from\n";
-	mkdir("initrd.to") || print STDERR "Cannot make temp mount point initrd.to\n";
-	status_system("mount -o ro,loop $initrd initrd.from", "Cannot mount $initrd on initrd.from");
-	status_system("mount -o loop newinitrd initrd.to", "Cannot mount newinitrd on initrd.to");
-	status_system("cp -a initrd.from/* initrd.to/", "Cannot copy initrd to newinitrd");
-	status_system("umount initrd.from", "Cannot umount initrd.from");
-	status_system("umount initrd.to", "Cannot umount initrd.to");
-	rmdir("initrd.from") || print STDERR "Cannot remove temp mount point initrd.from\n";
-	rmdir("initrd.to") || print STDERR "Cannot remove temp mount point initrd.to\n";
-	return (0);
-}
-
-1;

contrib/mkffwnb/README

@@ -1,69 +0,0 @@
-This is a quick and dirty script to convert a floppyfw floppy
-(http://www.zelow.no/floppyfw/) to a tagged image for booting with
-Etherboot (http://etherboot.sourceforge.net/). The advantages of network
-booting include: it's much faster loading from the network than from a
-floppy disk, you can boot from any size floppy, and you are not limited
-to the maximum of 1.44 MB of the physical floppy. If you have enough RAM
-and use a virtual floppy to build the initial boot image, you can put as
-much on it as will fit the ramdisk.
-
-See further down under -nonet if you want to boot from HD or CDROM.
-
-This program requires mtools, tar, bzip2, loopback mount in the kernel,
-and root privileges to execute. Hope you have them.
-
-This script works for any of the releases for which a subdirectory of
-that name is provided, but it should not be too hard to make it work for
-other releases, all that is done here is to substitute some scripts for
-the distributed ones.
-
-First of all you should make the floppy work the way you want before
-converting it to a tagged image. This involves editing the various
-config files on the floppy. Instructions on this are distributed from
-the floppyfw web page mentioned above.
-
-Edit the $tftpdir assignment for the directory where you put your tagged
-images.  Edit the $libdir assignment and the use lib directive near the
-top if you decide to put this package somewhere other than
-/usr/local/lib/mkffwnb/. Adjust the instructions below as necessary.
-
-Copy everything to $libdir.
-
-	mkdir -p /usr/local/lib/mkffwnb/
-	cp -a . /usr/local/lib/mkffwnb/
-
-Make a link from /usr/local/lib/mkffwnb/mkffwnb.pl to
-/usr/local/bin/mkffwnb so that it's in your path.
-
-	ln -s /usr/local/lib/mkffwnb/mkffwnb.pl /usr/local/bin/mkffwnb
-
-Then run it as:
-
-	mkffwnb
-
-You can also provide a floppy drive as an argument, e.g.
-
-	mkffwnb x:
-
-where x: could be mapped to a disk file. This allows you to build an
-image without a real floppy drive. Remember that for virtual drives root
-must have the mapping for the drive in question in ~root/.mtoolsrc.
-
-You can use the option --localtime=/etc/localtime to specify that the
-file /etc/localtime is to be copied to /etc/localtime on the initrd.
-Instead of /etc/localtime, you can use any of the timezone files under
-/usr/share/zoneinfo/, it's just that /etc/localtime will usually be the
-correct one for your timezone.
-
-If you use the option -nonet, it leaves the intermediate files in
-$tempdir, /tmp/mkffwnb by default. This is useful if you want the
-vmlinuz and initrd.gz files for use with LILO or isolinux to boot from
-HD or CDROM. Actually you can also use these with a floppy, it loads
-faster if you fold all the scripts and modules into the initrd ahead
-of time.
-
-mkffwnb has to be run as root because it uses loopback mounts and also
-because the files inside the initrd are owned by root.
-
-Ken Yap
-2003-04-20

contrib/mkffwnb/mkffwnb.pl

@@ -1,226 +0,0 @@
-#!/usr/bin/perl -w
-#
-# Perl script to make a bootable image from a floppyfw floppy
-# The basic idea is to unpack and replace or convert all
-# the necessary config files into the initrd
-# and then make a bootable image out of it
-#
-# The --format= option overrides the default of nbi or elf hardcoded
-# in the source. Valid arguments are nbi or elf.
-#
-# The --output= options specifies an output file instead of stdout
-# The --nonet option specifies that a netbootable image is not to
-# be built but the vmlinuz and initrd.gz files left behind in $tempdir
-# The --localtime=f option specifies a timezone file that's to be
-# copied to /etc/localtime in the initrd, allowing a different timezone.
-# The --ffw29 option is intended for 2.9.x and above and extends
-# the size of the initrd by making a bigger one and copying the original over.
-#
-# The first non-option argument is taken to be the letter of a floppy to
-# convert, e.g. a:, b: or even x: where x: is mapped to a file using
-# mtools mapping in $HOME/.mtoolsrc. See the mtools documentation.
-# Thus you can work on a floppy image in a disk file and only write
-# to a floppy with dd or cp when you need to test the image.
-
-use Getopt::Long;
-
-use lib '/usr/local/lib/mkffwnb/';
-use Extendinitrd;
-
-use strict;
-
-use vars qw($testing $verbose $localtime $nonet $format $ffw29 $imagefile
-	$floppy $libdir $tftpdir $output $tempdir $tempmount);
-
-sub findversion () {
-	my ($version) = grep(/FloppyFW/, `mtype $imagefile ${floppy}floppyfw.msg`);
-	return '' unless defined($version) and $version ne '';
-	chomp($version);
-	$version =~ s/.*FloppyFW (\d+\.\d+\.\d+(\.\d+)?).*/$1/;
-	return ($version);
-}
-
-sub getappendargs () {
-	my ($append) = join(' ', grep(/^\s*(append\s|console=)/, `mtype $imagefile ${floppy}syslinux.cfg`));
-	chomp ($append);
-	my @args = split(/\s+/, $append);
-	my @result = ();
-	foreach $_ (@args) {
-		next if (/^$/ or /^append/ or /^initrd=/);
-		next if (!$ffw29 and /^root=/);
-		push (@result, $_);
-	}
-	return (join(' ', @result));
-}
-
-# Copy whole floppy to the current directory
-# m preserves timestamps, n overwrites without warning and / means recursive
-sub mcopy ($) {
-	my ($tempdir) = @_;
-
-	print "mcopy $imagefile -mn/ ${floppy}* $tempdir\n";
-	my $status = system("mcopy -mn/ $imagefile ${floppy}* $tempdir");
-	return ($status / 256);
-}
-
-# Gunzip file, -f forces overwriting of uncompressed file
-sub gunzip ($) {
-	my ($file) = @_;
-
-	print "Gunzipping $file\n" if ($verbose);
-	my $status = system('gunzip', '-f', $file);
-	return ($status / 256);
-}
-
-# Gzip file, -f forces overwriting of compressed file
-sub gzip ($) {
-	my ($file) = @_;
-
-	print "Gzipping $file\n" if ($verbose);
-	my $status = system('gzip', '-9', '-f', $file);
-	return ($status / 256);
-}
-
-sub loopbackmount ($$) {
-	my ($file, $point) = @_;
-
-	print "Mounting $file on $point loopback\n" if ($verbose);
-	my $status = system('mount', '-o', 'loop', $file, $point);
-	return ($testing ? 0 : $status / 256);
-}
-
-sub loopbackumount ($) {
-	my ($point) = @_;
-
-	print "Umounting $point\n" if ($verbose);
-	my $status = system('umount', $point);
-	return ($testing ? 0 : $status / 256);
-}
-
-# Convert DOS CR-NL to Unix NL. $dst has implied prefix of $tempmount
-# Use @output for temporary storage in case we write back to the same file
-sub dostounix ($$) {
-	my ($src, $dst) = @_;
-	my @output = ();
-
-	$dst = "$tempmount/$dst";
-	print "Converting $src to $dst\n" if ($verbose);
-	unless (open(S, $src)) {
-		print "$src: $!\n";
-		return (0);
-	}
-	while (<S>) {
-		chomp;
-		tr /\015//d;
-		push(@output, $_);
-	}
-	close(S);
-	open(D, ">$dst") or return;
-	for $_ (@output) {
-		print D "$_\n";
-	}
-	close(D);
-	chmod(0755, $dst);
-	return (1);
-}
-
-sub bunzip2untar ($$) {
-	my ($file, $dir) = @_;
-
-	print "Unpacking $file into $dir\n" if ($verbose);
-	system("bunzip2 < $file | (cd $dir; tar xf -)");
-}
-
-$testing = $< != 0;
-$verbose = 1;
-$format = '';
-$imagefile = '';
-GetOptions('output=s' => \$output,
-	'nonet!' => \$nonet,
-	'localtime=s' => \$localtime,
-	'format=s' => \$format,
-	'ffw29!' => \$ffw29,
-	'ffw30!' => \$ffw29,
-	'i=s' => \$imagefile);
-if (defined($output) and $output !~ m(^/)) {
-	my $d = `pwd`;
-	chomp($d);
-	$output = "$d/$output";
-}
-if ($imagefile) {
-	$imagefile = "-i $imagefile";
-}
-$libdir = '/usr/local/lib/mkffwnb';
-$tftpdir = '/usr/local/var/tftpboot';
-# default can also be 'elf'
-$format = 'nbi' if ($format ne 'elf' and $format ne 'nbi');
-$floppy = $#ARGV >= 0 ? $ARGV[0] : 'a:';
-print <<EOF;
-This program requires mtools, tar, bzip2, loopback mount in the kernel,
-and root privileges to execute. Hope you have them.
-EOF
-my $version = &findversion();
-$version ne '' or die "Cannot determine version\n";
-print "Version $version\n";
-my $append = &getappendargs();
-$append = "--append='$append'" if $append ne '';
-print "$append\n";
-$libdir .= '/' . $version;
--d $libdir or die "Cannot find files for $version\n";
-$tempdir = $nonet ? '/tmp/mkffwnb' : "/tmp/mkffwnb$$";
-$tempmount = 'tmpmount';
-mkdir($tempdir, 0755);
-print "Copying files off floppy, please be patient...\n";
-&mcopy($tempdir) == 0 or die "Mcopy failed, diskette problem?\n";
-chdir($tempdir);
-&gunzip('initrd.gz') == 0 or die "Gunzip of initrd.gz failed\n";
-if ($ffw29) {
-	extendinitrd("initrd", 5760);
-	system("mv newinitrd initrd");
-}
-mkdir($tempmount, 0755);
-&loopbackmount('initrd', $tempmount) == 0 or die "Loopback mount failed\n";
-&dostounix("$libdir/linuxrc", "linuxrc") if (-r "$libdir/linuxrc");
-unless (&dostounix("$libdir/floppyfw.ini", "floppyfw.ini")) {
-	&dostounix("floppyfw/floppyfw.ini", $ffw29 ? "etc/floppyfw.ini" : "floppyfw.ini");
-}
-&dostounix("config", $ffw29 ? "etc/config.prelogin" : "etc/config");
-for my $i (glob('*.bz2 floppyfw/add.bz2 modules/*.bz2 packages/*.bz2')) {
-	&bunzip2untar($i, $tempmount);
-}
-for my $i (glob('packages/*.ini')) {
-	my $file = $i;
-	$file =~ s:packages/::;
-	&dostounix($i, "etc/$file");
-}
-&dostounix("hosts", "etc/hosts");
-&dostounix("modules.lst", "etc/modules.lst");
-&dostounix("network.ini", "etc/network.init");
-&dostounix("firewall.ini", "etc/firewall.init");
-&dostounix("syslog.cfg", "etc/syslog.conf");
-&dostounix("packages/timeinfo", "etc/localtime");
-system("cp -p licenses/* $tempmount/licenses/");
-# This conditional code is for 1.1.2 and below
-unless (glob('modules/*.bz2')) {
-	print "Copying additional modules\n" if ($verbose);
-	system("cp -p modules/* $tempmount/lib/modules/");
-}
-# If a timezone file has been specified, copy that onto initrd
-if (defined($localtime)) {
-	if (-r $localtime) {
-		print "Copying $localtime to $tempmount/etc/localtime\n";
-		system("cp -p $localtime $tempmount/etc/localtime");
-	} else {
-		print "$localtime: $!\n";
-	}
-}
-&loopbackumount($tempmount) == 0 or die "Loopback umount failed\n";
-&gzip('initrd') == 0 or die "Gzip of initrd failed\n";
-if ($nonet) {
-	print "Floppyfw directory in $tempdir\n";
-} else {
-	print "Calling mk$format-linux to make the netbootable image\n" if ($verbose);
-	$output = "$tftpdir/floppyfw-$version.nb" if (!defined($output));
-	system("mk$format-linux $append --output=$output vmlinuz initrd.gz");
-	system("rm -fr $tempdir");
-}

contrib/mklrpnb/README.txt

@@ -1,4 +0,0 @@
-This is a quick and dirty Perl program to make a netbootable
-image from a Linux Router floppy. It was tested with a Coyote Linux
-(http://www.coyotelinux.com) floppy which is based on LRP.  You need tar,
-mtools, mknbi-1.0, and of course, perl, to run this script.

contrib/mklrpnb/extractdach.pl

@@ -1,191 +0,0 @@
-#!/usr/bin/perl -w
-#
-# A program to make a netbootable image from a LRP firewall floppy
-#
-# Tested on a Dachstein Linux floppy image available from
-# http://lrp1.steinkuehler.net/ or via http://leaf.sourceforge.net/
-
-# The most recent version of this script and a companion HowTo is available at
-# http://members.optushome.com.au/graybeard/linux/netboot.html
-#
-# Modified from the mklrpnb file found in the contrib/mklrpnb directory of the
-# Etherboot source at http://etherboot.sourceforge.net/
-#
-# Modifications by Glenn McK <graybeard@users.sourceforge.net> 
-# $Id$
-##################################### 
-
-# this entry will need changing
-$image = "/home/graybeard/etherboot/dachstein-v1.0.2-1680.bin";
-
-# these can remain, but change them if desired
-#
-# the next argument defaults to firewall if no other name is passed via the
-# command line, this will be the directory where distribution will be expanded
-# under $base and also the directory in /tftpboot for lrp.nb
-
-my $uniqdir = shift || 'firewall';
-
-$mntdir   = "/mnt/floppy";          # where the above image file can be mounted
-$tftpbase = "/tftpboot";
-$tftpboot = "$tftpbase/$uniqdir";   # where the netboot images will be available
-$base     = "/usr/src/LRP";
-$dachorg = "$base/dach-org-$uniqdir"; # a copy required to make the distribution
-$dachnew = "$base/lrp-$uniqdir";      # the base files for the new distribution
-$packages = "$dachnew/var/lib/lrpkg"; # list to allow lrcfg to display Packages
-
-# everything below should be okay
-######################################
-
-if ( !-e $image ) {
-    print
-"\n\tA valid LRP file and directory are required\n\tdownload one then edit $0\n\n";
-    exit 1;
-}
-if ( !-d $base ) {
-    mkdir( $base, 0700 );
-}
-
-if ( !-d $dachorg ) {
-    mkdir( $dachorg, 0700 );
-}
-
-if ( !-d $dachnew ) {
-    mkdir( $dachnew, 0700 );
-    `umount $mntdir`;
-    `mount -o ro,loop $image $mntdir`;
-
-    `cp -vr $mntdir/* $dachorg/`;
-
-    @cfg = `cat $mntdir/syslinux.cfg`;
-
-    unless ( defined(@cfg) ) {
-        print "Cannot find syslinux.cfg on $mntdir\n";
-        exit 1;
-    }
-    print "cfg = @cfg\n";
-    ($append) = grep( /append/, @cfg );    # find the append= line
-    print "append = \n$append\n";
-    chomp($append);                        # remove trailing newline
-    $append =~ s/append=//;                # remove the append= at beginning
-    print "strip append = \n$append\n\n";
-    @args = split ( / /, $append );        # split into arguments at whitespace
-    ($root) = grep( /^initrd=/, @args );   # find the initrd= argument
-    $root =~ s/^initrd=//;                 # remove the initrd= at beginning
-    $root =~ s/\.lrp$//;                   # cleanup for paclages list
-    print "strip initrd = \n$root\n\n";
-    ($lrp) = grep( /^LRP=/, @args );       # find the LRP= argument
-    $lrp =~ s/^LRP=//;                     # remove the LRP= at beginning
-    print "strip LRP =\n$lrp\n\n";
-    @lrp = split ( /,/, $lrp );            # split into filenames at ,
-    unshift ( @lrp, $root );               # prepend the root LRP filename
-    @pack = @lrp;
-    print "LRP =\n@lrp\n\n";
-    $append = '';
-
-    foreach $i (@args) {                   # rebuild the append string
-        next if ( $i =~ /^initrd=/ );      # minus the unneeded parameters
-        next if ( $i =~ /^LRP=/ );
-        next if ( $i =~ /^boot=/ );
-        next if ( $i =~ /^PKGPATH=/ );
-        print "$i = i\n";
-        $append .= "$i ";
-    }
-
-    print "final append = \n$append\n";
-
-    chdir($dachnew) or die "$dachnew: $!\n";
-    foreach $i (@lrp) {
-        $i .= '.lrp' if $i !~ /\.lrp$/;
-        print "\n\n\nUnpacking $i\n";
-        system("ln -svf $dachorg/$i ${dachorg}/${i}.tar.gz");
-        chmod 0600, "$dachorg/$i";
-        system("cat $mntdir/$i | tar zxvf -");
-    }
-
-    # create file for lrcfg to display packages
-    open( PACKAGES, ">$packages/packages" )
-      || print "unable to modify $packages:$!\n";
-    foreach $line (@pack) {
-        print PACKAGES "$line\n";
-    }
-    close PACKAGES;
-
-    # prevent previous file from being overwritten during installation
-    # and also mess with some values in /linuxrc to hide non errors
-    open( LINUXRC, "$packages/root.linuxrc" );
-    @text = <LINUXRC>;
-    close LINUXRC;
-    open( LINUXRC, ">$packages/root.linuxrc" );
-    foreach $line (@text) {
-        $line =~ s/PFX\/packages/PFX\/packages-old \
-\t\t\t\t# packages changed to packages-old for netboot setup/;
-        $line =~
-s/^rc=1/# rc=1 changed to rc=0 to suppress error messages for netboot setup \
-rc=0/;
-        $line =~
-s/echo -n \" \(nf\!\)\"/#echo -n \" \(nf\!\)\" changed to reflect ToDo list \
-\t\t\techo -n \" netboot setup - No backups possible from this machine - ToFix ?"/;
-        print LINUXRC $line;
-    }
-    close LINUXRC;
-
-    # swap interfaces around in network config file
-    # eth1 is the new external eth0 is OUR internal server access
-    open( NETWORK, "$dachnew/etc/network.conf" )
-      || print "Unable to modify NETWORK:$!\n";
-    @text = <NETWORK>;
-    close NETWORK;
-    open( NETWORK, ">$dachnew/etc/network.conf" )
-      || print "Unable to modify NETWORK:$!\n";
-    foreach $line (@text) {
-        $line =~ s/eth0/eth00/;
-        $line =~ s/eth1/eth0/;
-        $line =~ s/eth00/eth1/;
-        print NETWORK $line;
-    }
-    close NETWORK;
-
-    `echo $append > $dachorg/appendstr`;
-
-    `umount /mnt/floppy`;
-    print "\nThe files have been extracted to $dachnew\n";
-    system("ls -al $dachnew");
-}
-else {
-    print "\n\n\t$image \n \thas already been extracted to $dachnew \
-\tNow skipping to the next step where the netboot file\
-\twill be created.\n";
-
-    $append = `cat $dachorg/appendstr`;
-    print "\nThe new append string will be...\n$append\n";
-
-    chdir($dachnew);
-    if ( !-d $tftpbase ) {
-        mkdir( $tftpbase, 0710 );
-        system("chgrp nobody $tftpbase");
-    }
-
-    unlink($tftpboot);
-
-    # these permissions really need changing to something secure
-    mkdir( $tftpboot, 0710 );
-    system("chgrp nobody $tftpboot");
-    print "\tRepacking to $tftpboot/lrp.lrp\n";
-    system("tar zcf $tftpboot/lrp.lrp *");
-    print "\tExtracting kernel image from $dachorg\n";
-    system("cat $dachorg/linux > $tftpboot/lrp.ker");
-    print "\tCreating netboot image $tftpboot/lrp.nb\n";
-    system(
-"mknbi-linux --append='$append' --output=$tftpboot/lrp.nb $tftpboot/lrp.ker $tftpboot/lrp.lrp"
-    );
-    chmod 0604, "$tftpboot/lrp.nb", "$tftpboot/lrp.ker", "$tftpboot/lrp.lrp";
-    print "\nThese netboot files are in $tftpboot\n";
-    system("ls -al $tftpboot");
-    print "\n   The owner and permissions for $tftpboot \
- and files should be checked for security. The above\
-permissions assume that tftp is running chroot (nobody)
-      drwx--r---   root:nobody   /tftpboot\n\n";
-}
-
-exit 0;

contrib/mklrpnb/mklrpnb

@@ -1,45 +0,0 @@
-#!/usr/bin/perl -w
-#
-# A program to make a netbootable image from a LRP firewall floppy
-# Tested on a Coyote Linux floppy
-#
-@cfg = `mtype a:syslinux.cfg`;
-unless (defined(@cfg)) {
-	print "Cannot find syslinux.cfg on floppy\n";
-	exit 1;
-}
-($append) = grep(/^append/, @cfg);	# find the append= line
-chomp($append);				# remove trailing newline
-$append =~ s/append=//;			# remove the append= at beginning
-@args = split(/ /, $append);		# split into arguments at whitespace
-($root) = grep(/^initrd=/, @args);	# find the initrd= argument
-$root =~ s/^initrd=//;			# remove the initrd= at beginning
-($lrp) = grep(/^LRP=/, @args);		# find the LRP= argument
-$lrp =~ s/^LRP=//;			# remove the LRP= at beginning
-@lrp = split(/,/, $lrp);		# split into filenames at ,
-unshift(@lrp, $root);			# prepend the root LRP filename
-$append = '';
-foreach $i (@args) {			# rebuild the append string
-	next if ($i =~ /^initrd=/);	# minus the unneeded parameters
-	next if ($i =~ /^LRP=/);
-	next if ($i =~ /^boot=/);
-	$append .= "$i ";
-}
-# print "$append\n";
-$tempdir = "/tmp/lrp$$";
-mkdir($tempdir, 0777) or die "$tempdir: $!\n";
-chdir($tempdir) or die "$tempdir: $!\n";
-foreach $i (@lrp) {
-	$i .= '.lrp' if $i !~ /\.lrp$/;
-	print "Unpacking $i\n";
-	system("mtype a:$i | tar zxvf -");
-}
-print "Repacking to /tmp/lrp.lrp\n";
-system("tar zcf /tmp/lrp.lrp *");
-chdir('/tmp') or die "/tmp: $!\n";
-system("rm -fr $tempdir");
-print "Extracting kernel image from floppy\n";
-system("mtype a:linux > /tmp/lrp.ker");
-print "Creating netboot image in /tmp/lrp.nb\n";
-system("mkelf-linux --append='$append' --output=/tmp/lrp.nb /tmp/lrp.ker /tmp/lrp.lrp");
-exit 0;

contrib/mntnbi/mntnbi.pl

@@ -1,97 +0,0 @@
-#!/usr/bin/perl -w
-#
-# Quick Perl program to decode and display details about 
-# tagged images created by mknbi, and then mount the contained
-# DOS filesystem using a loop-back mount
-#
-# Martin Atkins, November 1998
-# by hacking disnbi by
-# Ken Yap, September 1998
-#
-#
-
-sub getvendordata {
-	my ($flags) = @_;
-
-	my $vendordata = '';
-	my $vendorlen = ($flags & 0xff) >> 4;
-	if ($vendorlen > 0) {
-		$vendorlen *= 4;
-		$vendordata = unpack("A$vendorlen", substr($imageheader, $curoffset));
-		$curoffset += $vendorlen;
-	}
-	return ($vendordata);
-}
-
-sub decodesegmentflags {
-	my ($flags) = @_;
-
-	$flags >>= 24;
-	$flags &= 0x3;
-	($flags == 0) and $type = "Absolute";
-	($flags == 1) and $type = "Follows last segment";
-	($flags == 2) and $type = "Below end of memory";
-	($flags == 3) and $type = "Below last segment loaded";
-	return ($type);
-}
-
-sub onesegment
-{
-	my ($segnum) = @_;
-	my ($type, $vendordata);
-
-	my ($flags, $loadaddr, $imagelen, $memlength) = unpack("V4", substr($imageheader, $curoffset));
-	$curoffset += 16;
-	print "Segment number $segnum\n";
-	printf "Load address:\t\t%08x\n", $loadaddr;
-	printf "Image length:\t\t%d\n", $imagelen;
-	printf "Memory length:\t\t%d\n", $memlength;
-	$type = &decodesegmentflags($flags);
-	printf "Position:\t\t$type\n";
-	printf "Vendor tag:\t\t%d\n", ($flags >> 8) & 0xff;
-	if (($vendordata = &getvendordata($flags)) ne '') {
-		print "Vendor data:\t\t", $vendordata, "\n";
-	}
-	print "\n";
-	push (@seglengths, $imagelen);
-	return (($flags >> 26) & 1);
-}
-
-@seglengths = ();
-$#ARGV == 1 or die "Usage: mntnbi tagged-image-file dir\n";
-$imagefile= $ARGV[0];
-open(I, $ARGV[0]) or die "$imagefile: $!\n";
-(defined($status = sysread(I, $imageheader, 512)) and $status == 512)
-	or die "$imagefile: Cannot read header\n";
-$headerrecord = substr($imageheader, 0, 16);
-($magic, $flags, $bx, $ds, $ip, $cs) = unpack("a4Vv4", $headerrecord);
-$magic eq "\x36\x13\x03\x1B" or die "$imagefile: Not a tagged image file\n";
-$curoffset = 16;
-
-# Now decode the header
-
-printf "Header location:\t%04x:%04x\n", $ds, $bx;
-printf "Start address:\t\t%04x:%04x\n", $cs, $ip;
-printf "Flags:\n";
-	print "Return to loader after execution (extension)\n" if (($flags >> 8) &  1);
-if (($vendordata = &getvendordata($flags)) ne '') {
-	print "Vendor data:\t\t", $vendordata, "\n";
-}
-print "\n";
-
-# Now decode each segment record
-
-$segnum = 1;
-do {
-	$lastrecord = &onesegment($segnum);
-	++$segnum;
-} while (!$lastrecord);
-
-if ($#seglengths != 1) {
-	die "This is not a DOS image $#seglengths\n";
-}
-$offset = 512 + $seglengths[0];
-print "mounting filesystem at offset $offset in $ARGV[0] on $ARGV[1]\n";
-$rc = system "mount $ARGV[0] $ARGV[1] -t msdos -o loop,offset=$offset";
-print "Done\n" if ($rc == 0);
-exit(0);

contrib/nfs-swap/README

@@ -1,2 +0,0 @@
-For more information please check
-http://nfs-swap.dot-heine.de

contrib/p910nd-0.8/Makefile

@@ -1,10 +0,0 @@
-# Comment out the second command and uncomment the first command
-# below if you don't want to use libwrap (hosts.{allow,deny} access control)
-
-# If you don't have it in /var/log/subsys, uncomment and define
-#CFLAGS+=-DLOCKFILE_DIR=\"/var/log\"
-LIBWRAP=-lwrap
-
-p910nd:	p910nd.c
-#	$(CC) -Wall $(CFLAGS) -o $@ p910nd.c
-	$(CC) -Wall $(CFLAGS) -DUSE_LIBWRAP -o $@ p910nd.c $(LIBWRAP)

contrib/p910nd-0.8/banner.pl

@@ -1,9 +0,0 @@
-#!/usr/bin/perl
-while (1)
-{
-	exit 0 if read(STDIN,$c,1) == 0;
-	last if ($cl eq "\031" && $c eq "\001");
-	$cl = $c;
-}
-kill 'STOP',$$;
-exit 0

contrib/p910nd-0.8/client.pl

@@ -1,58 +0,0 @@
-#!/usr/bin/perl
-
-# edit this to the printer hostname
-$them = 'ken';
-$port = 9101;
-
-open(STDIN, "$ARGV[0]") if $#ARGV >= 0;
-
-use Socket;
-#use Sys::Hostname;
-
-#$hostname = hostname;
-
-($name, $aliases, $proto) = getprotobyname('tcp');
-($name, $aliases, $port) = getservbyname($port, 'tcp')
-	unless $port =~ /^\d+$/;
-
-#$thisaddr = inet_aton($hostname);
-#defined($thisaddr) or &errexit("inet_aton: cannot resolve $hostname\n");
-
-$thataddr = inet_aton($them);
-defined($thataddr) or &errexit("inet_aton: cannot resolve $them\n");
-
-socket(S, PF_INET, SOCK_STREAM, $proto) or &errexit("socket: $!\n");
-
-#$this = sockaddr_in(0, $thisaddr);
-#bind(S, $this) || &errexit("bind: $!\n");
-
-$that = sockaddr_in($port, $thataddr);
-connect(S, $that) || &errexit("connect: $!\n");
-
-select(S); $| = 1; select(STDOUT);
-
-$buffer = '';
-while (1)
-{
-	$rin = '';
-	vec($rin, fileno(S), 1) = 1;
-	$nfound = select($rout=$rin, $wout=$rin, undef, undef);
-	if (vec($rout, fileno(S), 1)) {
-		print STDERR "$buffer\n" if
-			defined($nread = sysread(S, $buffer, 8192));
-	}
-	if (vec($wout, fileno(S), 1)) {
-		$nread = read(STDIN, $buffer, 8192);
-		last if $nread == 0;
-		&errexit("write: $!\n") unless
-			defined($written = syswrite(S,$buffer,$nread));
-	}
-}
-close(S);
-exit 0;
-
-sub errexit
-{
-	print STDERR @_;
-	exit 2;
-}

contrib/p910nd-0.8/p910nd.8

@@ -1,93 +0,0 @@
-.TH P910ND 8 "1 August 2004"
-.SH NAME
-p910nd \- port 9100+n printer daemon
-.SH SYNOPSIS
-.B p910nd
-[\fB-f device\fR]
-[\fB-i bindaddr\fR]
-[\fB-bv\fR]
-[\fB0|1|2\fR]
-.SH DESCRIPTION
-.I p910nd
-is a small daemon that copies any data received on the port
-it is listening on to the corresponding printer port.
-It is primarily intended for diskless Linux hosts running as printer drivers
-but there is no reason why it could not be used on diskful hosts.
-Port 9100 is copied to /dev/lp0, 9101 to /dev/lp1 and 9102 to /dev/lp2.
-The default is port 9100 to /dev/lp0.
-.LP
-The \fB-f\fR option can be used to specify a different printer device,
-e.g. /dev/usblp0.
-.LP
-The \fB-i\fR option can be used to specify binding to one address instead
-of all interfaces which is the default.
-.LP
-The \fB-b\fR option turns on bidirectional copying.
-.LP
-The \fB-v\fR option shows the version number.
-.SH INSTALLATION
-.I p910nd
-can be run as a standalone daemon or from inetd.
-It will automatically detect if it is running under inetd.
-.LP
-A sample SysVinit script,
-.IR p910nd.sh ,
-is provided for operation as a daemon.
-.I p910nd
-will change its name under ps to match the printer port, i.e.
-.I p9100d, p9101d
-and
-.IR p9102d .
-.LP
-When running under inetd, the
-.I /etc/inetd.conf
-entry should look something like this (with tcpwrappers protection):
-.sp
-.nf
-p9101 stream tcp nowait root /usr/sbin/tcpd /sbin/p910nd
-.fi
-.sp
-Don't forget to add an entry in
-.I /etc/services
-for the corresponding port.
-.LP
-If operating with lprng, use the host%port syntax for the
-printer device to send jobs to it.
-.LP
-If operating with CUPS, this is supported as the AppSocket
-protocol, also known as the JetDirect (probably TM) protocol.
-.LP
-If operating with classic Berkeley lpd, a sample client,
-.IR client.pl ,
-is provided.
-This should be installed as the ifilter (if=) in /etc/printcap.
-.I banner.pl
-should be installed as the ofilter (of=) in /etc/printcap.
-It may be necessary to create a dummy spool file for lpd (lp=).
-This file will be opened but not written to.
-The corresponding C versions are left as an exercise for the reader.
-.LP
-When running under inetd, more than one instance could be started.
-To avoid problems with multiple instances attempting to access the
-printer at the same time, make sure that only one client is active
-at any one time. This can be done by designating one host as the
-spooler and sending all jobs to this host. You will probably
-need to set up an intermediate queue anyway to provide print job filtering.
-.LP
-If compiled with USE_LIBWRAP and linked with -lwrap, it uses the libwrap
-library (tcpwrappers). Access control can be done with /etc/hosts.allow
-and /etc/hosts.deny. The service name is p910nd.
-.SH DIAGNOSTICS
-.I p910nd
-logs error messages to syslog.
-.SH "SEE ALSO"
-printcap(5), hosts_access(5)
-.SH FILES
-/var/run/p9100d.pid, /var/lock/subsys/p9100d, /etc/hosts.allow, /etc/hosts.deny
-.SH COPYRIGHT
-.I p910nd
-is under the GNU Public License
-.SH AUTHOR
-Ken Yap (ken_yap@users.sourceforge.net)
-.SH DATE
-Version 0.8 October 2004

contrib/p910nd-0.8/p910nd.c

@@ -1,420 +0,0 @@
-/*
- *	Port 9100+n daemon
- *	Accepts a connection from port 9100+n and copy stream to
- *	/dev/lpn, where n = 0,1,2.
- *
- *	Run standalone as: p910nd [0|1|2]
- *
- *	Run under inetd as:
- *	p910n stream tcp nowait root /usr/sbin/tcpd p910nd [0|1|2]
- *	 where p910n is an /etc/services entry for
- *	 port 9100, 9101 or 9102 as the case may be.
- *	 root can be replaced by any uid with rw permission on /dev/lpn
- *
- *	Port 9100+n will then be passively opened
- *	n defaults to 0
- *
- *	Version 0.8
- *	Allow specifying address to bind to
- *
- *	Version 0.7
- *	Bidirectional data transfer
- *
- *	Version 0.6
- *	Arne Bernin fixed some cast warnings, corrected the version number
- *	and added a -v option to print the version.
- *
- *	Version 0.5
- *	-DUSE_LIBWRAP and -lwrap enables hosts_access (tcpwrappers) checking.
- *
- *	Version 0.4
- *	Ken Yap (ken_yap@users.sourceforge.net), April 2001
- *	Placed under GPL.
- *
- *	Added -f switch to specify device which overrides /dev/lpn.
- *	But number is still required get distinct ports and locks.
- *
- *	Added locking so that two invocations of the daemon under inetd
- *	don't try to open the printer at the same time. This can happen
- *	even if there is one host running clients because the previous
- *	client can exit after it has sent all data but the printer has not
- *	finished printing and inetd starts up a new daemon when the next
- *	request comes in too soon.
- *
- *	Various things could be Linux specific. I don't
- *	think there is much demand for this program outside of PCs,
- *	but if you port it to other distributions or platforms,
- *	I'd be happy to receive your patches.
- */
-
-#include	<unistd.h>
-#include	<stdlib.h>
-#include	<stdio.h>
-#include	<getopt.h>
-#include	<ctype.h>
-#include	<string.h>
-#include	<fcntl.h>
-#include	<netdb.h>
-#include	<syslog.h>
-#include	<errno.h>
-#include	<sys/types.h>
-#include	<sys/time.h>
-#include	<sys/resource.h>
-#include	<sys/stat.h>
-#include	<sys/socket.h>
-#include	<netinet/in.h>
-#include	<arpa/inet.h>
-
-#ifdef	USE_LIBWRAP
-#include	"tcpd.h"
-int		allow_severity, deny_severity;
-extern		int hosts_ctl(char *daemon, char *client_name,
-		char *client_addr, char *client_user);
-#endif
-
-#define		BASEPORT	9100
-#define		PIDFILE		"/var/run/p910%cd.pid"
-#ifdef		LOCKFILE_DIR
-#define		LOCKFILE	LOCKFILE_DIR "/p910%cd"
-#else
-#define		LOCKFILE	"/var/lock/subsys/p910%cd"
-#endif
-#define		PRINTERFILE	"/dev/lp%c"
-#define		LOGOPTS		LOG_ERR
-
-static char	*progname;
-static char	version[] = "p910nd Version 0.8";
-static int	lockfd = -1;
-static char	*device = 0;
-static int	bidir = 0;
-static char	*bindaddr = 0;
-
-void usage(void)
-{
-	fprintf(stderr, "Usage: %s [-f device] [-i bindaddr] [-bv] [0|1|2]\n", progname);
-	exit(1);
-}
-
-void show_version (void)
-{
-	fprintf(stdout, "%s \n", version);
-}
-
-FILE *open_printer(int lpnumber)
-{
-	FILE		*f;
-	char		lpname[sizeof(PRINTERFILE)];
-
-#ifdef	TESTING
-	(void)snprintf(lpname, sizeof(lpname), "/dev/tty");
-#else
-	(void)snprintf(lpname, sizeof(lpname), PRINTERFILE, lpnumber);
-#endif
-	if (device == 0)
-		device = lpname;
-	if ((f = fopen(device, bidir ? "w+" : "w")) == NULL)
-	{
-		syslog(LOGOPTS, "%s: %m\n", device);
-		exit(1);
-	}
-	return (f);
-}
-
-int get_lock(int lpnumber)
-{
-	char		lockname[sizeof(LOCKFILE)];
-	struct flock	lplock;
-
-	(void)snprintf(lockname, sizeof(lockname), LOCKFILE, lpnumber);
-	if ((lockfd = open(lockname, O_CREAT|O_RDWR)) < 0)
-	{
-		syslog(LOGOPTS, "%s: %m\n", lockname);
-		return (0);
-	}
-	memset(&lplock, 0, sizeof(lplock));
-	lplock.l_type = F_WRLCK;
-	lplock.l_pid = getpid();
-	if (fcntl(lockfd, F_SETLKW, &lplock) < 0)
-	{
-		syslog(LOGOPTS, "%s: %m\n", lockname);
-		return (0);
-	}
-	return (1);
-}
-
-void free_lock(void)
-{
-	if (lockfd >= 0)
-		(void)close(lockfd);
-}
-
-/* Copy network socket to FILE f until EOS */
-int copy_stream(int fd, FILE *f)
-{
-	int		nread;
-	char		buffer[8192];
-
-	if (bidir) {
-		FILE	*nf;
-
-		if ((nf = fdopen(fd, "w")) == NULL) {
-			syslog(LOGOPTS, "fdopen: %m\n");
-		}
-		for (;;) {
-			fd_set	readfds;
-			int result;
-			int maxfd = fileno(f) > fd ? fileno(f) : fd;
-			FD_ZERO(&readfds);
-			FD_SET(fileno(f), &readfds);
-			FD_SET(fd, &readfds);
-			result = select(maxfd + 1, &readfds, 0, 0, 0);
-			if (result < 0)
-				return (result);
-			if (result == 0)
-				continue;
-			if (FD_ISSET(fd, &readfds)) {
-				nread = read(fd, buffer, sizeof(buffer));
-				if (nread <= 0)
-					break;
-				(void)fwrite(buffer, sizeof(char), nread, f);
-			}
-			if (FD_ISSET(fileno(f), &readfds)) {
-				nread = read(fileno(f), buffer, sizeof(buffer));
-				if (nread > 0 && nf != NULL) {
-					(void)fwrite(buffer, sizeof(char), nread, nf);
-					(void)fflush(nf);
-				}
-			}
-		}
-		(void)fflush(f);
-		(void)fclose(nf);
-		return (0);
-	} else {
-		while ((nread = read(fd, buffer, sizeof(buffer))) > 0)
-			(void)fwrite(buffer, sizeof(char), nread, f);
-		(void)fflush(f);
-		return (nread);
-	}
-}
-
-void one_job(int lpnumber)
-{
-	FILE		*f;
-	struct sockaddr_in	client;
-	socklen_t	clientlen = sizeof(client);
-
-	if (getpeername(0, (struct sockaddr*) &client, &clientlen) >= 0)
-		syslog(LOGOPTS, "Connection from %s port %hu\n",
-			inet_ntoa(client.sin_addr),
-			ntohs(client.sin_port));
-	if (get_lock(lpnumber) == 0)
-		return;
-	f = open_printer(lpnumber);
-	if (copy_stream(0, f) < 0)
-		syslog(LOGOPTS, "copy_stream: %m\n");
-	fclose(f);
-	free_lock();
-}
-
-void server(int lpnumber)
-{
-	struct rlimit	resourcelimit;
-#ifdef	USE_GETPROTOBYNAME
-	struct protoent	*proto;
-#endif
-	int		netfd, fd, one = 1;
-	socklen_t	clientlen;
-	struct sockaddr_in	netaddr, client;
-	char		pidfilename[sizeof(PIDFILE)];
-	FILE		*f;
-	int		ipret;
-
-#ifndef	TESTING
-	switch (fork())
-	{
-	case -1:
-		syslog(LOGOPTS, "fork: %m\n");
-		exit (1);
-	case 0:		/* child */
-		break;
-	default:	/* parent */
-		exit(0);
-	}
-	/* Now in child process */
-	resourcelimit.rlim_max = 0;
-	if (getrlimit(RLIMIT_NOFILE, &resourcelimit) < 0)
-	{
-		syslog(LOGOPTS, "getrlimit: %m\n");
-		exit(1);
-	}
-	for (fd = 0; fd < resourcelimit.rlim_max; ++fd)
-		(void)close(fd);
-	if (setsid() < 0)
-	{
-		syslog(LOGOPTS, "setsid: %m\n");
-		exit(1);
-	}
-	(void)chdir("/");
-	(void)umask(022);
-	fd = open("/dev/null", O_RDWR);	/* stdin */
-	(void)dup(fd);			/* stdout */
-	(void)dup(fd);			/* stderr */
-	(void)snprintf(pidfilename, sizeof(pidfilename), PIDFILE, lpnumber);
-	if ((f = fopen(pidfilename, "w")) == NULL)
-	{
-		syslog(LOGOPTS, "%s: %m\n", pidfilename);
-		exit(1);
-	}
-	(void)fprintf(f, "%d\n", getpid());
-	(void)fclose(f);
-	if (get_lock(lpnumber) == 0)
-		exit(1);
-#endif
-	f = open_printer(lpnumber);
-#ifdef	USE_GETPROTOBYNAME
-	if ((proto = getprotobyname("tcp")) == NULL)
-	{
-		syslog(LOGOPTS, "Cannot find protocol for TCP!\n");
-		exit(1);
-	}
-	if ((netfd = socket(AF_INET, SOCK_STREAM, proto->p_proto)) < 0)
-#else
-	if ((netfd = socket(AF_INET, SOCK_STREAM, IPPROTO_IP)) < 0)
-#endif
-	{
-		syslog(LOGOPTS, "socket: %m\n");
-		exit(1);
-	}
-	if (setsockopt(netfd, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one)) < 0)
-	{
-		syslog(LOGOPTS, "setsocketopt: %m\n");
-		exit(1);
-	}
-	netaddr.sin_port = htons(BASEPORT + lpnumber - '0');
-	if (bindaddr == 0) {
-		netaddr.sin_addr.s_addr = htonl(INADDR_ANY);
-	} else {
-		ipret = inet_pton(AF_INET, bindaddr, &netaddr.sin_addr.s_addr);
-		if (ipret < 0) {
-			syslog(LOGOPTS, "inet_pton: %m\n");
-			exit(1);
-		} else if (ipret == 0) {
-			syslog(LOGOPTS, "inet_pton: invalid bind IP address\n");
-			exit(1);
-		}
-	}
-	memset(netaddr.sin_zero, 0, sizeof(netaddr.sin_zero));
-	if (bind(netfd, (struct sockaddr*) &netaddr, sizeof(netaddr)) < 0)
-	{
-		syslog(LOGOPTS, "bind: %m\n");
-		exit(1);
-	}
-	if (listen(netfd, 5) < 0)
-	{
-		syslog(LOGOPTS, "listen: %m\n");
-		exit(1);
-	}
-	clientlen = sizeof(client);
-	memset(&client, 0, sizeof(client));
-	while ((fd = accept(netfd, (struct sockaddr*) &client, &clientlen)) >= 0)
-	{
-#ifdef	USE_LIBWRAP
-		if (hosts_ctl("p910nd", STRING_UNKNOWN,
-			inet_ntoa(client.sin_addr), STRING_UNKNOWN) == 0) {
-			syslog(LOGOPTS, "Connection from %s port %hd rejected\n",
-				inet_ntoa(client.sin_addr),
-				ntohs(client.sin_port));
-			close(fd);
-			continue;
-		}
-#endif
-		syslog(LOGOPTS, "Connection from %s port %hd accepted\n",
-			inet_ntoa(client.sin_addr),
-			ntohs(client.sin_port));
-		/*write(fd, "Printing", 8);*/
-		if (copy_stream(fd, f) < 0)
-			syslog(LOGOPTS, "copy_stream: %m\n");
-		(void)close(fd);
-	}
-	syslog(LOGOPTS, "accept: %m\n");
-	free_lock();
-	exit(1);
-}
-
-int is_standalone(void)
-{
-	struct sockaddr_in	bind_addr;
-	socklen_t		ba_len;
-
-	/*
-	 * Check to see if a socket was passed to us from inetd.
-	 *
-	 * Use getsockname() to determine if descriptor 0 is indeed a socket
-	 * (and thus we are probably a child of inetd) or if it is instead
-	 * something else and we are running standalone.
-	 */
-	ba_len = sizeof(bind_addr);
-	if (getsockname(0, (struct sockaddr*) &bind_addr, &ba_len) == 0)
-		return (0);		/* under inetd */
-	if (errno != ENOTSOCK)		/* strange... */
-		syslog(LOGOPTS, "getsockname: %m\n");
-	return (1);
-}
-
-int main(int argc, char *argv[])
-{
-	int		c, lpnumber;
-	char		*p;
-
-	if (argc <= 0)		/* in case not provided in inetd.conf */
-		progname = "p910nd";
-	else
-	{
-		progname = argv[0];
-		if ((p = strrchr(progname, '/')) != 0)
-			progname = p + 1;
-	}
-	lpnumber = '0';
-	while ((c = getopt(argc, argv, "bi:f:v")) != EOF)
-	{
-		switch (c)
-		{
-		case 'b':
-			bidir = 1;
-			break;
-		case 'f':
-			device = optarg;
-			break;
-		case 'i':
-			bindaddr = optarg;
-			break;
-		case 'v':
-	      	        show_version();
-			break;
-		default:
-			usage();
-			break;
-		}
-	}
-	argc -= optind;
-	argv += optind;
-	if (argc > 0)
-	{
-		if (isdigit(argv[0][0]))
-			lpnumber = argv[0][0];
-	}
-	/* change the n in argv[0] to match the port so ps will show that */
-	if ((p = strstr(progname, "p910n")) != NULL)
-		p[4] = lpnumber;
-	
-	/* We used to pass (LOG_PERROR|LOG_PID|LOG_LPR|LOG_ERR) to syslog, but
-	 * syslog ignored the LOG_PID and LOG_PERROR option.  I.e. the intention
-	 * was to add both options but the effect was to have neither.
-	 * I disagree with the intention to add PERROR.	 --Stef	 */
-	openlog (p, LOG_PID, LOG_LPR);
-	if (is_standalone())
-		server(lpnumber);
-	else
-		one_job(lpnumber);
-	return (0);
-}

contrib/p910nd-0.8/p910nd.sh

@@ -1,39 +0,0 @@
-#!/bin/sh
-#
-# p910nd.sh	This shell script takes care of starting and stopping
-#               p910nd (port 9100+n printer daemon)
-#		This script only controls the one on port 9101.
-#		You can start others if you wish.
-#
-
-# Todo: Make it fully LSB
-
-# See how we were called.
-case "$1" in
-  start)
-	# Start daemons.
-	echo -n "Starting p910nd: "
-	# default port is 1 so it will appear as p9101d on a ps
-	start_daemon p910nd
-	echo
-	;;
-  stop)
-	# Stop daemons.
-	echo -n "Shutting down p910nd: "
-	killproc p9101d
-	echo
-	rm -f /var/run/p9101.pid
-        ;;
-  status)
-	status p9101d
-	;;
-  restart)
-	$0 stop
-	$0 start
-	;;
-  *)
-	echo "Usage: p910nd {start|stop|restart|status}"
-	exit 1
-esac
-
-exit 0

contrib/ppmtoansi/Makefile

@@ -1,67 +0,0 @@
-CPPFLAGS    =
-LDLIBS      = 
-CFLAGS      = -pipe -g -O2 -Wall
-LDFLAGS     = -pipe
-CC          = gcc
-LD          = gcc
-# Some "black" magic to determine optimal compiler flags for target
-# architecture
-TARGET_ARCH:= $(shell if [ \! -r .compile-options ] ; then ( \
-                cpu=`grep cpu /proc/cpuinfo 2>&1 |head -1| \
-                     cut -d : -f 2-| sed -e 's/ //g'`; \
-                if [ x"$$cpu" = x"" ] ; then \
-                  echo -fno-strength-reduce; \
-                else if [ "$$cpu" = "386" ] ; then \
-                  echo -m386 -fno-strength-reduce; \
-                else if [ "$$cpu" = "486" ] ; then \
-                  echo -m486 -fno-strength-reduce; \
-                else if [ "$$cpu" = "Alpha" ] ; then \
-                  echo -fno-strength-reduce; \
-                else echo main\(\)\{\} >.compile-options.c; \
-                  if gcc -mpentium -o .compile-options.o -c \
-                         .compile-options.c &>/dev/null; then \
-                     echo -mpentium -fstrength-reduce; \
-                 else if gcc -m486 -malign-functions=2 -malign-jumps=2 \
-                             -malign-loops=2 -o .compile-options.o -c \
-                             .compile-options.c &>/dev/null; then \
-                  echo -n -m486 -malign-functions=2 -malign-jumps=2; \
-                  echo ' '-malign-loops=2 -fno-strength-reduce; \
-                else echo -m486; \
-              fi;fi;fi;fi;fi;fi) > .compile-options; \
-              rm -f .compile-options.c .compile-options.o; \
-              fi; cat .compile-options)
-ASFLAGS     = $(TARGET_ARCH)
-
-OBJS        = ppmtoansi.o
-
-##############################################################################
-
-ifeq (.depend,$(wildcard .depend))
-all: ppmtoansi
-include .depend
-else
-all: depend
-	@$(MAKE) all
-endif
-
-##############################################################################
-
-ppmtoansi: $(OBJS)
-
-##############################################################################
-
-clean:
-	$(RM) *~ *.o *.dvi *.log *.aux *yacc.tab.[ch] *yacc.output *lex.[co] \
-              *.dat .depend .tmp_depend .compile-options*
-	strip ppmtoansi >&/dev/null || true
-
-distclean: clean
-	$(RM) -rf ppmtoansi
-
-##############################################################################
-
-depend:
-	for i in *.c;do $(CPP) $(CPPFLAGS) -MM $$i;done >.tmp_depend
-	mv .tmp_depend .depend
-
-##############################################################################

contrib/ppmtoansi/demo/dos.ansi

@@ -1 +0,0 @@
-[9;;1- [15;;1- [18;;5-Ûl[9;1;3-$€[13;1;3-$€[17;1;1-À[9;2;1- [12;2;1- [15;2;1- [17;2;1-À[9;3;1- [15;3;1- [18;3;5-Ûl[9;4;1- [15;4;1- [23;4;1-À[9;5;1- [15;5;1- [23;5;1-À[9;6;1- [15;6;1- [18;6;5-Ûl[8;8;4-I [14;8;4-m°[19;8;5-¶Ú[8;9;1-@[12;9;2-L[18;9;2-¬[8;10;1-@[11;10;1-`[13;10;1-@[18;10;1- [20;10;1-`[8;11;1-@[11;11;1-`[13;11;1-@[19;11;5-¶Ú[8;12;1-@[11;12;1-`[13;12;1-@[20;12;1-`[24;12;1- [8;13;1-@[12;13;2-L[18;13;2-l[24;13;1- [8;14;4-I [14;14;4-m°[19;14;5-¶Ú

contrib/ppmtoansi/demo/dos.ppm

@@ -1,51 +0,0 @@
-P3
-17 16
-65535
-0 0 0  65535 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  65535 0 0  0 0 0  0 0 0  0 65535 65535  0 65535 65535
-0 65535 65535  0 65535 65535  0 65535 65535  0 0 0  0 0 0
-0 0 0  65535 0 0  65535 0 0  65535 0 0  0 0 0  65535 0 0
-65535 0 0  65535 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  65535 0 0  0 0 0  0 0 0  65535 0 0  0 0 0
-0 0 0  65535 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  65535 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  65535 0 0  0 0 0  0 0 0  0 65535 65535  0 65535 65535
-0 65535 65535  0 65535 65535  0 65535 65535  0 0 0  0 0 0
-0 0 0  65535 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  65535 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 65535 65535  0 0 0
-0 0 0  65535 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  65535 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 65535 65535  0 0 0
-0 0 0  65535 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  65535 0 0  0 0 0  0 0 0  0 65535 65535  0 65535 65535
-0 65535 65535  0 65535 65535  0 65535 65535  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 65535 0  0 65535 0  0 65535 0  0 65535 0  0 0 0  0 0 0
-65535 65535 0  65535 65535 0  65535 65535 0  65535 65535 0  0 0 0  65535 0 65535
-65535 0 65535  65535 0 65535  65535 0 65535  65535 0 65535  0 0 0
-0 65535 0  0 0 0  0 0 0  0 0 0  0 65535 0  65535 65535 0
-0 0 0  0 0 0  0 0 0  0 0 0  65535 0 65535  65535 65535 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 65535 0  0 0 0  0 0 0  65535 65535 0  0 0 0  0 65535 0
-0 0 0  0 0 0  0 0 0  0 0 0  65535 0 65535  0 0 0
-65535 65535 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 65535 0  0 0 0  0 0 0  65535 65535 0  0 0 0  0 65535 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  65535 0 65535
-65535 0 65535  65535 0 65535  65535 0 65535  65535 0 65535  0 0 0
-0 65535 0  0 0 0  0 0 0  65535 65535 0  0 0 0  0 65535 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-65535 65535 0  0 0 0  0 0 0  0 0 0  65535 0 65535
-0 65535 0  0 0 0  0 0 0  0 0 0  0 65535 0  65535 65535 0
-0 0 0  0 0 0  0 0 0  0 0 0  65535 65535 0  65535 65535 0
-0 0 0  0 0 0  0 0 0  0 0 0  65535 0 65535
-0 65535 0  0 65535 0  0 65535 0  0 65535 0  0 0 0  0 0 0
-65535 65535 0  65535 65535 0  65535 65535 0  65535 65535 0  0 0 0  65535 0 65535
-65535 0 65535  65535 0 65535  65535 0 65535  65535 0 65535  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0

contrib/ppmtoansi/demo/dos.xpm

@@ -1,29 +0,0 @@
-/* XPM */
-static char *noname[] = {
-/* width height ncolors chars_per_pixel */
-"17 16 6 1",
-/* colors */
-"` c #000000",
-"a c #00FFFF",
-"b c #00FF00",
-"c c #FF00FF",
-"d c #FF0000",
-"e c #FFFF00",
-/* pixels */
-"`d`````d``aaaaa``",
-"`ddd`ddd`a```````",
-"`d``d``d`a```````",
-"`d`````d``aaaaa``",
-"`d`````d```````a`",
-"`d`````d```````a`",
-"`d`````d``aaaaa``",
-"`````````````````",
-"bbbb``eeee`ccccc`",
-"b```be````ce`````",
-"b``e`b````c`e````",
-"b``e`b`````ccccc`",
-"b``e`b``````e```c",
-"b```be````ee````c",
-"bbbb``eeee`ccccc`",
-"`````````````````"
-};

contrib/ppmtoansi/demo/etherboot.ppm

@@ -1,99 +0,0 @@
-P3
-32 16
-65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0
-65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0
-65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0
-65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0
-65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0
-65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0
-65535 0 0  65535 0 0
-65535 0 0  0 0 0  0 0 0  0 65535 0  0 65535 0  0 65535 0
-0 65535 0  0 0 0  0 65535 0  0 65535 0  0 65535 0  0 65535 0
-0 0 0  0 65535 0  0 65535 0  0 65535 0  0 65535 0  0 0 0
-0 65535 0  0 65535 0  0 65535 0  0 65535 0  0 65535 0  0 0 0
-0 65535 0  0 65535 0  0 65535 0  0 65535 0  0 0 0  0 0 0
-0 0 0  65535 0 0
-65535 0 0  0 0 0  0 0 0  0 65535 0  0 65535 0  0 65535 0
-0 65535 0  0 0 0  0 65535 0  0 0 0  0 0 0  0 65535 0
-0 0 0  0 65535 0  0 0 0  0 0 0  0 65535 0  0 0 0
-0 0 0  0 0 0  0 65535 0  0 0 0  0 0 0  0 0 0
-0 65535 0  0 65535 0  0 65535 0  0 65535 0  0 0 0  0 0 0
-0 0 0  65535 0 0
-65535 0 0  0 0 0  0 0 0  0 65535 0  0 0 0  0 0 0
-0 65535 0  0 0 0  0 65535 0  0 0 0  0 0 0  0 65535 0
-0 0 0  0 65535 0  0 0 0  0 0 0  0 65535 0  0 0 0
-0 0 0  0 0 0  0 65535 0  0 0 0  0 0 0  0 0 0
-0 65535 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  65535 0 0
-0 0 0  65535 0 0  0 0 0  0 65535 0  0 65535 0  0 65535 0
-0 65535 0  0 0 0  0 65535 0  0 65535 0  0 65535 0  0 65535 0
-0 0 0  0 65535 0  0 65535 0  0 65535 0  0 65535 0  0 0 0
-0 0 0  0 0 0  0 65535 0  0 0 0  0 0 0  0 0 0
-0 65535 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  65535 0 0
-0 0 0  0 0 0  65535 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  65535 0 0
-0 0 0  65535 0 0  0 0 0  0 65535 0  0 65535 0  0 65535 0
-0 65535 0  0 65535 0  0 0 0  0 65535 0  0 65535 0  0 65535 0
-0 65535 0  0 0 0  0 65535 0  0 65535 0  0 65535 0  0 65535 0
-0 65535 0  0 0 0  0 65535 0  0 65535 0  0 65535 0  0 65535 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  65535 0 0
-65535 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 65535 0
-0 0 0  0 0 0  0 0 0  0 65535 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 65535 0  0 0 0
-0 0 0  0 0 0  0 65535 0  0 65535 0  0 65535 0  0 65535 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  65535 0 0
-65535 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 65535 0
-0 0 0  0 0 0  0 0 0  0 65535 0  0 65535 0  0 65535 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 65535 0  0 0 0
-0 0 0  0 0 0  0 65535 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  65535 0 0
-65535 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 65535 0
-0 0 0  0 0 0  0 0 0  0 65535 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 65535 0  0 0 0
-0 0 0  0 0 0  0 65535 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  65535 0 0
-65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0
-65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0
-65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0
-65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0
-65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0  65535 0 0
-65535 0 0  65535 0 0
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0  0 65535 65535  0 0 0  0 0 0  0 65535 65535
-0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0  0 0 0  0 0 0  0 0 0  0 0 0
-0 0 0  0 0 0

contrib/ppmtoansi/demo/etherboot.xpm

@@ -1,27 +0,0 @@
-/* XPM */
-static char *noname[] = {
-/* width height ncolors chars_per_pixel */
-"32 16 4 1",
-/* colors */
-"` c #000000",
-"a c #00FFFF",
-"b c #00FF00",
-"c c #FF0000",
-/* pixels */
-"``a``a``a``a``a``a``a``a``a``a``",
-"``a``a``a``a``a``a``a``a``a``a``",
-"cccccccccccccccccccccccccccccccc",
-"c``bbbb`bbbb`bbbb`bbbbb`bbbb```c",
-"c``bbbb`b``b`b``b```b```bbbb```c",
-"c``b``b`b``b`b``b```b```b``````c",
-"`c`bbbb`bbbb`bbbb```b```b``````c",
-"``c````````````````````````````c",
-"`c`bbbbb`bbbb`bbbbb`bbbb```````c",
-"c````b```b``````b```bbbb```````c",
-"c````b```bbb````b```b``````````c",
-"c````b```b``````b```b``````````c",
-"cccccccccccccccccccccccccccccccc",
-"``a``a``a``a``a``a``a``a``a``a``",
-"``a``a``a``a``a``a``a``a``a``a``",
-"````````````````````````````````"
-};

contrib/ppmtoansi/demo/flash.ansi

@@ -1 +0,0 @@
-[11;;2-l[11;1;2-l[17;1;1-`[11;2;2-l[16;2;2-l[11;3;2-l[15;3;3-m€[11;4;2-l[14;4;4-m°[11;5;2-l[14;5;4-m°[11;6;4-m°[16;6;2-l[11;7;4-m°[16;7;2-l[11;8;3-m€[16;8;2-l[11;9;2-l[16;9;2-l[11;10;1-`[16;10;2-l[16;11;2-l[13;12;2-l[16;12;2-l[19;12;2-l[14;13;6-m¶À[15;14;4-m°[16;15;2-l