robin.thoni/ipxe - git rthoni.com

Michael Brown d90fc3156c [realtek] Use ID word to detect EEPROM presence Some onboard RTL8169 NICs seem to leave the EEPROM pins disconnected. The existing is_valid_ether_addr() test will not necessarily catch this, since it expects a missing EEPROM to show up as a MAC address of 00:00:00:00:00:00 or ff:ff:ff:ff:ff:ff. When the EEPROM pins are floating the MAC address may read as e.g. 00:00:00:00:0f:00, which will not be detected as invalid. Check the ID word in the first two bytes of the EEPROM (which should have the value 0x8129 for all RTL8139 and RTL8169 chips), and use this to determine whether or not an EEPROM is present. Reported-by: Carl Karsten <carl@nextdayvideo.com> Tested-by: Carl Karsten <carl@nextdayvideo.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>		преди 11 години
contrib	[contrib] Enable bochs debug port by default	преди 12 години
src	[realtek] Use ID word to detect EEPROM presence	преди 11 години
COPYING	Initial revision	преди 19 години
COPYRIGHTS	[build] Rename gPXE to iPXE	преди 14 години
README	[doc] Re-add README file	преди 14 години

iPXE README File

Quick start guide:

   cd src
   make

For any more detailed instructions, see http://ipxe.org