robin.thoni/ipxe - git rthoni.com

Michael Brown d5e273e5c2 [e1000] Request notification of TX completions The RS bit is used to instruct the NIC to update the TX descriptor status byte. The RPS bit is used to instruct the NIC to defer this update until after the packet has been transmitted on the wire (rather than merely read into the transmit FIFO). The driver currently sets RPS but not RS. Some e1000 models seem to interpret this as implying that the status byte should be updated; some don't. On the ones that don't, we never see any TX completions and so rapidly run out of TX buffers. Fix by setting the RS bit in the TX descriptor. (We don't care about when the packet reaches the wire, so don't bother setting the RPS bit.) Reported-by: Miroslav Halas <miroslav.halas@bankofamerica.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>		13 anos atrás
contrib	[contrib] Update rom-o-matic to build iPXE	13 anos atrás
src	[e1000] Request notification of TX completions	13 anos atrás
COPYING	Initial revision	19 anos atrás
COPYRIGHTS	[build] Rename gPXE to iPXE	14 anos atrás
README	[doc] Re-add README file	14 anos atrás

iPXE README File

Quick start guide:

   cd src
   make

For any more detailed instructions, see http://ipxe.org