123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450 |
- #
- # Makefile for Etherboot
- #
- # Most of the time you should edit Config
- #
- # Common options:
- # VERSION_*=v - Set the major and minor version numbers
- #
- # NS8390 options:
- # -DINCLUDE_NE - Include NE1000/NE2000 support
- # -DNE_SCAN=list - Probe for NE base address using list of
- # comma separated hex addresses
- # -DINCLUDE_3C503 - Include 3c503 support
- # -DT503_SHMEM - Use 3c503 shared memory mode (off by default)
- # -DINCLUDE_WD - Include Western Digital/SMC support
- # -DWD_DEFAULT_MEM- Default memory location for WD/SMC cards
- # -DWD_790_PIO - Read/write to WD/SMC 790 cards in PIO mode (default
- # is to use shared memory) Try this if you get "Bogus
- # packet, ignoring" messages, common on ISA/PCI hybrid
- # systems.
- # -DCOMPEX_RL2000_FIX
- #
- # If you have a Compex RL2000 PCI 32-bit (11F6:1401),
- # and the bootrom hangs in "Probing...[NE*000/PCI]",
- # try enabling this fix... it worked for me :).
- # In the first packet write somehow it somehow doesn't
- # get back the expected data so it is stuck in a loop.
- # I didn't bother to investigate what or why because it works
- # when I interrupt the loop if it takes more then COMPEX_RL2000_TRIES.
- # The code will notify if it does a abort.
- # SomniOne - somnione@gmx.net
- #
- # 3C509 option:
- # -DINCLUDE_3C509 - Include 3c509 support
- #
- # 3C90X options:
- # -DINCLUDE_3C90X - Include 3c90x support
- #
- # Warning Warning Warning
- # If you use any of the XCVR options below, please do not complain about
- # the behaviour with Linux drivers to the kernel developers. You are
- # on your own if you do this. Please read 3c90x.txt to understand
- # what they do. If you don't understand them, ask for help on the
- # Etherboot mailing list. And please document what you did to the NIC
- # on the NIC so that people after you won't get nasty surprises.
- #
- # -DCFG_3C90X_PRESERVE_XCVR - Reset the transceiver type to the value it
- # had initially just before the loaded code is started.
- # -DCFG_3C90X_XCVR - Hardcode the tranceiver type Etherboot uses.
- # -DCFG_3C90X_BOOTROM_FIX - If you have a 3c905B with buggy ROM
- # interface, setting this option might "fix" it. Use
- # with caution and read the docs in 3c90x.txt!
- #
- # See the documentation file 3c90x.txt for more details.
- #
- # CS89X0 (optional) options:
- # -DINCLUDE_CS89X0- Include CS89x0 support
- # -DCS_SCAN=list - Probe for CS89x0 base address using list of
- # comma separated hex addresses; increasing the
- # address by one (0x300 -> 0x301) will force a
- # more aggressive probing algorithm. This might
- # be neccessary after a soft-reset of the NIC.
- #
- # LANCE options:
- # -DINCLUDE_NE2100- Include NE2100 support
- # -DINCLUDE_NI6510- Include NI6510 support
- #
- # SK_G16 options:
- # -DINCLUDE_SK_G16- Include SK_G16 support
- #
- # I82586 options:
- # -DINCLUDE_3C507 - Include 3c507 support
- # -DINCLUDE_NI5210- Include NI5210 support
- # -DINCLUDE_EXOS205-Include EXOS205 support
- #
- # SMC9000 options:
- # -DINCLUDE_SMC9000 - Include SMC9000 driver
- # -DSMC9000_SCAN=list - List of I/O addresses to probe
- #
- # TIARA (Fujitsu Etherstar) options:
- # -DINCLUDE_TIARA - Include Tiara support
- #
- # NI5010 options:
- # -DINCLUDE_NI5010 - Include NI5010 support
- #
- # TULIP options:
- # -DINCLUDE_TULIP - Include Tulip support
- #
- # RTL8139 options:
- # -DINCLUDE_RTL8139 - Include RTL8139 support
- #
- # SIS900 options:
- # -DINCLUDE_SIS900 - Include SIS900 support
- #
- # NATSEMI options:
- # -DINCLUDE_NATSEMI - Include NATSEMI support
- #
-
- SRCS:=
- BOBJS:=
-
- MAKEROM= $(PERL) ./util/makerom.pl
- VERSION_MAJOR= 5
- VERSION_MINOR= 3
- VERSION_PATCH= 14
- EXTRAVERSION=
- VERSION= $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_PATCH)$(EXTRAVERSION)
- MM_VERSION= $(VERSION_MAJOR).$(VERSION_MINOR)
- CFLAGS+= -DVERSION_MAJOR=$(VERSION_MAJOR) \
- -DVERSION_MINOR=$(VERSION_MINOR) \
- -DVERSION=\"$(VERSION)\" $(OLDGAS) \
- -I include -I arch/$(ARCH)/include \
- -DARCH=$(ARCH)
- FILO=filo
- FILO_PROGRAM_NAME = FILO
- FILO_PROGRAM_VERSION = 0.4.1
- FILO_BUILD_INFO = ($(shell whoami)@$(shell hostname)) $(shell LANG=C date)
-
- GCCINCDIR = $(shell $(CC) -print-search-dirs | head -n 1 | cut -d' ' -f2)include
- CPPFLAGS = -nostdinc -imacros filo/config.h
- #-Ifilo/include -I$(GCCINCDIR) -MD
- ASFLAGS_X = -D__ASSEMBLY__
-
- IDENT= '$(@F) $(VERSION) (GPL) etherboot.org'
-
- # Find out if we're using binutils 2.9.1 which uses a different syntax in some
- # places (most prominently in the opcode prefix area).
- OLDGAS:= $(shell $(AS) --version | grep -q '2\.9\.1' && echo -DGAS291)
-
- BUILD_LIBS= $(BLIB)
- BUILD_IMGS= $(IMGS)
-
- 3C503FLAGS= -DINCLUDE_3C503 # -DT503_SHMEM
- # Note that the suffix to MAKEROM_ is the (mixed case) basename of the ROM file
- MAKEROM_3c503= -3
- 3C507FLAGS= -DINCLUDE_3C507
- 3C509FLAGS= -DINCLUDE_3C509
- 3C529FLAGS= -DINCLUDE_3C529
- 3C595FLAGS= -DINCLUDE_3C595
- 3C90XFLAGS= -DINCLUDE_3C90X
- CS89X0FLAGS= -DINCLUDE_CS89X0
- EEPROFLAGS= -DINCLUDE_EEPRO
- EEPRO100FLAGS= -DINCLUDE_EEPRO100
- E1000FLAGS= -DINCLUDE_E1000
- EPIC100FLAGS= -DINCLUDE_EPIC100
- EXOS205FLAGS= -DINCLUDE_EXOS205
- LANCEFLAGS= -DINCLUDE_LANCE # Lance/PCI!
- NE2100FLAGS= -DINCLUDE_NE2100
- NEFLAGS= -DINCLUDE_NE -DNE_SCAN=0x300,0x280,0x320,0x340,0x380
- NS8390FLAGS= -DINCLUDE_NS8390 # NE2000/PCI!
- NI5010FLAGS= -DINCLUDE_NI5010
- NI5210FLAGS= -DINCLUDE_NI5210
- NI6510FLAGS= -DINCLUDE_NI6510
- RTL8139FLAGS= -DINCLUDE_RTL8139
- SK_G16FLAGS= -DINCLUDE_SK_G16
- SIS900FLAGS= -DINCLUDE_SIS900
- NATSEMIFLAGS= -DINCLUDE_NATSEMI
- SMC9000FLAGS= -DINCLUDE_SMC9000
- SUNDANCEFLAGS= -DINCLUDE_SUNDANCE
- TLANFLAGS= -DINCLUDE_TLAN
- TIARAFLAGS= -DINCLUDE_TIARA
- DEPCAFLAGS= -DINCLUDE_DEPCA # -DDEPCA_MODEL=DEPCA -DDEPCA_RAM_BASE=0xd0000
- TULIPFLAGS= -DINCLUDE_TULIP
- OTULIPFLAGS= -DINCLUDE_OTULIP
- VIA_RHINEFLAGS= -DINCLUDE_VIA_RHINE
- WDFLAGS= -DINCLUDE_WD -DWD_DEFAULT_MEM=0xCC000
- W89C840FLAGS= -DINCLUDE_W89C840
-
- SRCS+= core/serial.c
-
- SRCS+= core/btext.c core/pc_kbd.c
-
- SRCS+= core/main.c core/pci.c core/osloader.c core/nfs.c
- SRCS+= core/misc.c core/config.c core/isa_probe.c core/pci_probe.c
- SRCS+= core/relocate.c core/heap.c
- SRCS+= drivers/disk/floppy.c core/nic.c core/disk.c core/timer.c
- SRCS+= core/proto_eth_slow.c
- SRCS+= core/proto_slam.c core/proto_tftm.c core/proto_http.c
- SRCS+= core/isapnp.c
- SRCS+= core/pcmcia.c core/i82365.c
- SRCS+= core/pxe_export.c core/dns_resolver.c
-
- FILO_SRCS+= $(FILO)/drivers/ide_x.c
- FILO_SRCS+= $(FILO)/fs/blockdev.c $(FILO)/fs/eltorito.c $(FILO)/fs/fsys_ext2fs.c $(FILO)/fs/fsys_fat.c $(FILO)/fs/fsys_iso9660.c
- FILO_SRCS+= $(FILO)/fs/fsys_reiserfs.c $(FILO)/fs/vfs.c $(FILO)/fs/fsys_jfs.c $(FILO)/fs/fsys_minix.c $(FILO)/fs/fsys_xfs.c
- FILO_SRCS+= $(FILO)/main/elfload.c $(FILO)/main/elfnote.c $(FILO)/main/filo_x.c $(FILO)/main/lib.c $(FILO)/main/linuxbios_x.c
- FILO_SRCS+= $(FILO)/main/pci_x.c $(FILO)/main/malloc_x.c $(FILO)/main/printf_x.c $(FILO)/main/console_x.c
- FILO_SRCS+= $(FILO)/$(ARCH)/context.c $(FILO)/$(ARCH)/linux_load.c $(FILO)/$(ARCH)/segment.c $(FILO)/$(ARCH)/sys_info.c
- FILO_SRCS+= $(FILO)/$(ARCH)/switch.S $(FILO)/usb/debug_x.c $(FILO)/usb/scsi_cmds.c $(FILO)/usb/uhci.c $(FILO)/usb/usb.c
- FILO_SRCS+= $(FILO)/usb/ohci.c $(FILO)/usb/usb_scsi_low.c $(FILO)/usb/usb_x.c
-
-
- BOBJS+= $(BIN)/main.o $(BIN)/osloader.o $(BIN)/nfs.o $(BIN)/misc.o
- BOBJS+= $(BIN)/proto_slam.o $(BIN)/proto_tftm.o $(BIN)/proto_http.o
- BOBJS+= $(BIN)/floppy.o
- BOBJS+= $(BIN)/serial.o $(BIN)/timer.o $(BIN)/relocate.o $(BIN)/heap.o
- BOBJS+= $(BIN)/btext.o $(BIN)/pc_kbd.o
- BOBJS+= $(BIN)/nic.o $(BIN)/disk.o
- BOBJS+= $(BIN)/isapnp.o
- BOBJS+= $(BIN)/pci.o $(BIN)/isa_probe.o $(BIN)/pci_probe.o
- BOBJS+= $(BIN)/vsprintf.o $(BIN)/string.o
- BOBJS+= $(BIN)/pcmcia.o $(BIN)/i82365.o
- BOBJS+= $(BIN)/pxe_export.o $(BIN)/dns_resolver.o
-
- FILO_OBJS+= $(BIN)/ide_x.o $(BIN)/pci_x.o
- FILO_OBJS+= $(BIN)/blockdev.o $(BIN)/eltorito.o $(BIN)/fsys_ext2fs.o $(BIN)/fsys_fat.o $(BIN)/fsys_iso9660.o $(BIN)/fsys_reiserfs.o $(BIN)/vfs.o
- FILO_OBJS+= $(BIN)/fsys_jfs.o $(BIN)/fsys_minix.o $(BIN)/fsys_xfs.o
- FILO_OBJS+= $(BIN)/elfload.o $(BIN)/elfnote.o $(BIN)/filo_x.o $(BIN)/lib.o $(BIN)/linuxbios_x.o $(BIN)/malloc_x.o $(BIN)/printf_x.o $(BIN)/console_x.o
- FILO_OBJS+= $(BIN)/context.o $(BIN)/linux_load.o $(BIN)/segment.o $(BIN)/sys_info.o $(BIN)/switch.o
- FILO_OBJS+= $(BIN)/debug_x.o $(BIN)/scsi_cmds.o $(BIN)/uhci.o $(BIN)/usb.o $(BIN)/ohci.o $(BIN)/usb_scsi_low.o $(BIN)/usb_x.o
-
- BLIB= $(BIN)/bootlib.a
- FILOLIB= $(BIN)/filolib.a
- LIBS= $(BLIB)
- ifdef INCLUDE_FILO
- LIBS+= $(FILOLIB)
- endif
- UTILS+= $(BIN)/nrv2b
- STDDEPS= $(START) $(UTILS)
- # MAKEDEPS is the one target that is depended by all ROMs, so we check gcc here
- # If you are confident that gcc 2.96 works for you, you can remove the lines
- # that check gcc in the toolcheck rule
- MAKEDEPS+= Makefile Makefile.main Config genrules.pl Families
- MAKEDEPS+= $(BIN)/toolcheck
- MAKEDEPS+= arch/$(ARCH)/Makefile arch/$(ARCH)/Config
-
- # Start of targets
-
- .PHONY: noargs
- noargs: $(BIN)/toolcheck
- @echo '===================================================='
- @echo 'No target specified. To specify a target, do: '
- @echo
- @echo ' $(MAKE) bin/<rom-name>.<output-format> '
- @echo
- @echo 'where <output-format> is one of {zdsk, zrom, iso, liso, zlilo, zpxe, elf, com}'
- @echo
- @echo 'or: '
- @echo
- @echo ' $(MAKE) all<output-format>s'
- @echo
- @echo 'to generate all possible images of format <output-format>'
- @echo
- @echo 'For example, '
- @echo
- @echo ' make allzroms '
- @echo
- @echo 'will generate all possible .zrom (rom burnable) images, and'
- @echo
- @echo ' make allzdsks'
- @echo
- @echo 'will generate all possible .zdsk (bootable floppy) images, or'
- @echo
- @echo '===================================================='
- @exit 1
-
- $(BIN)/toolcheck: Makefile Config
- @if $(CC) -v 2>&1 | grep -is 'gcc version 2\.96' > /dev/null; \
- then \
- echo 'gcc 2.96 is unsuitable for compiling Etherboot'; \
- echo 'Use gcc 2.95 or gcc 3.x instead'; \
- exit 1; \
- else \
- touch $(BIN)/toolcheck; \
- fi; \
- if [ `perl -e 'use bytes; print chr(255)' | wc -c` = 2 ]; \
- then \
- echo 'Your Perl version has a Unicode handling bug'; \
- echo 'To workaround, execute this before compiling Etherboot:'; \
- echo 'export LANG=$${LANG%.UTF-8}'; \
- exit 1; \
- fi
-
- include arch/$(ARCH)/Makefile
-
- # Common files
-
- $(BLIB): $(BOBJS)
- $(AR) r $@ $(BOBJS)
- $(RANLIB) $@
-
- $(FILOLIB): $(FILO_OBJS)
- $(AR) r $@ $(FILO_OBJS)
- $(RANLIB) $@
-
- # LinuxBIOS support code
- $(BIN)/linuxbios.o: firmware/linuxbios/linuxbios.c include/etherboot.h include/dev.h firmware/linuxbios/linuxbios_tables.h
-
- # Do not add driver specific dependencies here unless it's something the
- # genrules.pl script *can't* deal with, i.e. if it is not C code.
-
- $(FILO)/config.h: $(FILO)/Config
- /bin/echo -e '/* GENERATED FILE, DO NOT EDIT */\n' >$@
- sed -e 's/#.*//' -e '/=/!d' -e 's/\([^[:space:]]*\)[[:space:]]*=[[:space:]]*\(.*\).*/#define \1 \2/' -e 's/^#define \([^ ]*\) 0$$/#undef \1/' $^ >>$@
-
- filo_version: $(FILO)/main/version.h
-
- $(FILO)/main/version.h: FORCE
- echo '#define PROGRAM_NAME "$(FILO_PROGRAM_NAME)"' > $@
- echo '#define PROGRAM_VERSION "$(FILO_PROGRAM_VERSION) $(FILO_BUILD_INFO)"' >> $@
-
- FORCE:
-
-
- # Utilities
-
- $(BIN)/lzhuf: util/lzhuf.c
- $(HOST_CC) -O2 -DENCODE -DDECODE -DMAIN -DVERBOSE -o $@ $<
-
- # Roms file
- # Builds almost silently because this rule is triggered for just about
- # every modification to sources.
-
- $(BIN)/Roms $(BIN)/NIC: genrules.pl Families $(SRCS)
- @mkdir -p $(@D)
- @echo Scanning for ROMs and dependencies...
- @$(PERL) ./genrules.pl Families $(BIN)/NIC $(ARCH) $(SRCS) > $(BIN)/Roms
-
- # Pattern Rules
-
- # general rules for compiling/assembling source files
- $(BIN)/%.o: core/%.c $(MAKEDEPS)
- $(CC) $(CFLAGS) -o $@ -c $<
-
- $(BIN)/%.s: core/%.c $(MAKEDEPS)
- $(CC) $(CFLAGS) -S -o $@ -c $<
-
- $(BIN)/%.o: drivers/disk/%.c $(MAKEDEPS)
- $(CC) $(CFLAGS) -o $@ -c $<
-
- $(BIN)/%.o: drivers/net/%.c $(MAKEDEPS)
- $(CC) $(CFLAGS) -o $@ -c $<
-
- $(BIN)/%.o: firmware/linuxbios/%.c $(MAKEDEPS)
- $(CC) $(CFLAGS) -o $@ -c $<
-
- $(BIN)/%.o: $(FILO)/drivers/%.c $(MAKEDEPS) $(FILO)/config.h
- $(CC) $(CFLAGS) -imacros $(FILO)/config.h -o $@ -c $<
-
- $(BIN)/%.o: $(FILO)/fs/%.c $(MAKEDEPS) $(FILO)/config.h
- $(CC) $(CFLAGS) -imacros $(FILO)/config.h -o $@ -c $<
-
- $(BIN)/%.o: $(FILO)/$(ARCH)/%.c $(MAKEDEPS) $(FILO)/config.h
- $(CC) $(CFLAGS) -imacros $(FILO)/config.h -o $@ -c $<
-
- $(BIN)/%.o: $(FILO)/$(ARCH)/%.S $(MAKEDEPS) $(FILO)/config.h
- $(CC) $(ASFLAGS_X) $(CPPFLAGS) -c $< -o $@
-
- $(BIN)/%.o: $(FILO)/main/%.c $(MAKEDEPS) $(FILO)/config.h filo_version
- $(CC) $(CFLAGS) -imacros $(FILO)/config.h -o $@ -c $<
-
- $(BIN)/%.o: $(FILO)/usb/%.c $(MAKEDEPS) $(FILO)/config.h
- $(CC) $(CFLAGS) -imacros $(FILO)/config.h -o $@ -c $<
-
- # Rule for the super etherboot image.
- $(BIN)/etherboot.o: $(DOBJS)
- $(LD) $(LDFLAGS) -r $(DOBJS) -o $@
-
- $(BIN)/etherboot-pci.o: $(PCIOBJS)
- $(LD) $(LDFLAGS) -r $(PCIOBJS) -o $@
-
- # General rules for generating runtime (rt) files
- $(BIN)/%.rt.o: $(BIN)/%.o $(START) $(BIN)/config.o $(LIBS) $(STDDEPS) $(MAKEDEPS)
- $(LD) $(LDFLAGS) -r $(START) $(BIN)/config.o $< $(LIBS) -o $@
-
- # Rule for $(BIN)/%.FORMAT.rt is architecture and target-format specific
-
- $(BIN)/%.rt.bin: $(BIN)/%.rt $(MAKEDEPS)
- $(OBJCOPY) -O binary -R .prefix $< $@
-
- $(BIN)/%.rt1.bin: $(BIN)/%.rt $(MAKEDEPS)
- $(OBJCOPY) -O binary -j .text.nocompress $< $@
-
- $(BIN)/%.rt2.bin: $(BIN)/%.rt $(MAKEDEPS)
- $(OBJCOPY) -O binary -R .prefix -R .text.nocompress $< $@
-
- # Rules for generating prefix binary files
-
- # Rule for $(BIN)/%.FORMAT.prf is architecture and target-format specific
- $(BIN)/%.prf.bin: $(BIN)/%.prf $(MAKEDEPS)
- $(OBJCOPY) -j .prefix -O binary $< $@
-
- # general rule for .z (compressed binary code), may be overridden
- $(BIN)/%.zbin: $(BIN)/%.bin $(BIN)/nrv2b $(MAKEDEPS)
- $(BIN)/nrv2b e $< $@
-
- # Housekeeping
-
- clean:
- $(RM) $(BIN)/*
- $(RM) $(FILO)/config.h $(FILO)/main/version.h
-
- ../index.html: ../index.xhtml
- (cd ..; m4 -P -DHOSTSITE=SOURCEFORGE index.xhtml > index.html)
-
- ../index-berlios.html: ../index.xhtml
- (cd ..; m4 -P -DHOSTSITE=BERLIOS index.xhtml > index-berlios.html)
-
- tarball: ../index.html ../index-berlios.html
- (echo -n $(VERSION) ''; date -u +'%Y-%m-%d') > ../VERSION
- (cd ../..; tar cf /tmp/etherboot-$(VERSION).tar --exclude CVS --exclude doc etherboot-$(VERSION))
- bzip2 -9 < /tmp/etherboot-$(VERSION).tar > /tmp/etherboot-$(VERSION).tar.bz2
- gzip -9 < /tmp/etherboot-$(VERSION).tar > /tmp/etherboot-$(VERSION).tar.gz
-
- # Auto-incrementing build serial number. Is auto-incremented for each
- # make run that specifies a final image file (e.g. bin/undi.zpxe) as a
- # target, or a target of the form "all*". Enable via -DBUILD_SERIAL
- # in Config.
-
- ifneq ($(findstring -DBUILD_SERIAL,$(CFLAGS)),)
-
- # If no make goals are specified, it means "make all"
- REALGOALS = $(if $(MAKECMDGOALS),$(MAKECMDGOALS),all)
-
- # Filter to see if there are any targets to trigger an auto-increment
- BUILDGOALS = $(filter all,$(REALGOALS)) $(filter all%,$(REALGOALS)) \
- $(foreach SUFFIX,$(SUFFIXES),$(filter %.$(SUFFIX),$(REALGOALS)))
-
- ifneq ($(strip $(BUILDGOALS)),)
- # This is an auto-incrementing build. Forcibly rebuild .buildserial.h
- # and mark config.o as depending on it to force its rebuilding.
- bin/config.o : include/.buildserial.h
- .PHONY : include/.buildserial.h
- endif # BUILDGOALS
-
- include/.buildserial.h :
- @if [ ! -f $@ ]; then echo '#define BUILD_SERIAL_NUM 0' > $@; fi
- @perl -pi -e 's/(BUILD_SERIAL_NUM)\s+(\d+)/"$${1} ".($${2}+1)/e' $@
-
- buildserial : include/.buildserial.h
- @perl -n -e '/BUILD_SERIAL_NUM\s+(\d+)/ && ' \
- -e 'print "Build serial number is $$1\n";' $<
-
- else # -DBUILD_SERIAL
-
- buildserial :
- @echo Build serial number is disabled. Enable -DBUILD_SERIAL in Config.
-
- endif # -DBUILD_SERIAL
-
- bs : buildserial
-
- version:
- @echo $(VERSION)
-
- romlimit:
- @echo $(ROMLIMIT)
-
- sources:
- @echo $(SRCS)
|