123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195 |
- #ifndef CONFIG_GENERAL_H
- #define CONFIG_GENERAL_H
-
- /** @file
- *
- * General configuration
- *
- */
-
- FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
-
- #include <config/defaults.h>
-
- /*
- * Banner timeout configuration
- *
- * This controls the timeout for the "Press Ctrl-B for the iPXE
- * command line" banner displayed when iPXE starts up. The value is
- * specified in tenths of a second for which the banner should appear.
- * A value of 0 disables the banner.
- *
- * ROM_BANNER_TIMEOUT controls the "Press Ctrl-B to configure iPXE"
- * banner displayed only by ROM builds of iPXE during POST. This
- * defaults to being twice the length of BANNER_TIMEOUT, to allow for
- * BIOSes that switch video modes immediately before calling the
- * initialisation vector, thus rendering the banner almost invisible
- * to the user.
- */
- #define BANNER_TIMEOUT 20
- #define ROM_BANNER_TIMEOUT ( 2 * BANNER_TIMEOUT )
-
- /*
- * Network protocols
- *
- */
-
- #define NET_PROTO_IPV4 /* IPv4 protocol */
- #undef NET_PROTO_IPV6 /* IPv6 protocol */
- #undef NET_PROTO_FCOE /* Fibre Channel over Ethernet protocol */
- #define NET_PROTO_STP /* Spanning Tree protocol */
- #define NET_PROTO_LACP /* Link Aggregation control protocol */
-
- /*
- * PXE support
- *
- */
- //#undef PXE_STACK /* PXE stack in iPXE - you want this! */
- //#undef PXE_MENU /* PXE menu booting */
-
- /*
- * Download protocols
- *
- */
-
- #define DOWNLOAD_PROTO_TFTP /* Trivial File Transfer Protocol */
- #define DOWNLOAD_PROTO_HTTP /* Hypertext Transfer Protocol */
- #undef DOWNLOAD_PROTO_HTTPS /* Secure Hypertext Transfer Protocol */
- #undef DOWNLOAD_PROTO_FTP /* File Transfer Protocol */
- #undef DOWNLOAD_PROTO_SLAM /* Scalable Local Area Multicast */
- #undef DOWNLOAD_PROTO_NFS /* Network File System Protocol */
- //#undef DOWNLOAD_PROTO_FILE /* Local filesystem access */
-
- /*
- * SAN boot protocols
- *
- */
-
- //#undef SANBOOT_PROTO_ISCSI /* iSCSI protocol */
- //#undef SANBOOT_PROTO_AOE /* AoE protocol */
- //#undef SANBOOT_PROTO_IB_SRP /* Infiniband SCSI RDMA protocol */
- //#undef SANBOOT_PROTO_FCP /* Fibre Channel protocol */
- //#undef SANBOOT_PROTO_HTTP /* HTTP SAN protocol */
-
- /*
- * HTTP extensions
- *
- */
- #define HTTP_AUTH_BASIC /* Basic authentication */
- #define HTTP_AUTH_DIGEST /* Digest authentication */
- //#define HTTP_ENC_PEERDIST /* PeerDist content encoding */
-
- /*
- * 802.11 cryptosystems and handshaking protocols
- *
- */
- #define CRYPTO_80211_WEP /* WEP encryption (deprecated and insecure!) */
- #define CRYPTO_80211_WPA /* WPA Personal, authenticating with passphrase */
- #define CRYPTO_80211_WPA2 /* Add support for stronger WPA cryptography */
-
- /*
- * Name resolution modules
- *
- */
-
- #define DNS_RESOLVER /* DNS resolver */
-
- /*
- * Image types
- *
- * Etherboot supports various image formats. Select whichever ones
- * you want to use.
- *
- */
- //#define IMAGE_NBI /* NBI image support */
- //#define IMAGE_ELF /* ELF image support */
- //#define IMAGE_MULTIBOOT /* MultiBoot image support */
- //#define IMAGE_PXE /* PXE image support */
- //#define IMAGE_SCRIPT /* iPXE script image support */
- //#define IMAGE_BZIMAGE /* Linux bzImage image support */
- //#define IMAGE_COMBOOT /* SYSLINUX COMBOOT image support */
- //#define IMAGE_EFI /* EFI image support */
- //#define IMAGE_SDI /* SDI image support */
- //#define IMAGE_PNM /* PNM image support */
- //#define IMAGE_PNG /* PNG image support */
-
- /*
- * Command-line commands to include
- *
- */
- #define AUTOBOOT_CMD /* Automatic booting */
- #define NVO_CMD /* Non-volatile option storage commands */
- #define CONFIG_CMD /* Option configuration console */
- #define IFMGMT_CMD /* Interface management commands */
- #define IWMGMT_CMD /* Wireless interface management commands */
- #define IBMGMT_CMD /* Infiniband management commands */
- #define FCMGMT_CMD /* Fibre Channel management commands */
- #define ROUTE_CMD /* Routing table management commands */
- #define IMAGE_CMD /* Image management commands */
- #define DHCP_CMD /* DHCP management commands */
- #define SANBOOT_CMD /* SAN boot commands */
- #define MENU_CMD /* Menu commands */
- #define LOGIN_CMD /* Login command */
- #define SYNC_CMD /* Sync command */
- //#define NSLOOKUP_CMD /* DNS resolving command */
- //#define TIME_CMD /* Time commands */
- //#define DIGEST_CMD /* Image crypto digest commands */
- //#define LOTEST_CMD /* Loopback testing commands */
- //#define VLAN_CMD /* VLAN commands */
- //#define PXE_CMD /* PXE commands */
- //#define REBOOT_CMD /* Reboot command */
- //#define POWEROFF_CMD /* Power off command */
- //#define IMAGE_TRUST_CMD /* Image trust management commands */
- //#define PCI_CMD /* PCI commands */
- //#define PARAM_CMD /* Form parameter commands */
- //#define NEIGHBOUR_CMD /* Neighbour management commands */
- //#define PING_CMD /* Ping command */
- //#define CONSOLE_CMD /* Console command */
- //#define IPSTAT_CMD /* IP statistics commands */
- //#define PROFSTAT_CMD /* Profiling commands */
-
- /*
- * ROM-specific options
- *
- */
- #undef NONPNP_HOOK_INT19 /* Hook INT19 on non-PnP BIOSes */
- #define AUTOBOOT_ROM_FILTER /* Autoboot only devices matching our ROM */
-
- /*
- * Virtual network devices
- *
- */
- #define VNIC_IPOIB /* Infiniband IPoIB virtual NICs */
- //#define VNIC_XSIGO /* Infiniband Xsigo virtual NICs */
-
- /*
- * Error message tables to include
- *
- */
- #undef ERRMSG_80211 /* All 802.11 error descriptions (~3.3kb) */
-
- /*
- * Obscure configuration options
- *
- * You probably don't need to touch these.
- *
- */
-
- #undef BUILD_SERIAL /* Include an automatic build serial
- * number. Add "bs" to the list of
- * make targets. For example:
- * "make bin/rtl8139.dsk bs" */
- #undef BUILD_ID /* Include a custom build ID string,
- * e.g "test-foo" */
- #undef NULL_TRAP /* Attempt to catch NULL function calls */
- #undef GDBSERIAL /* Remote GDB debugging over serial */
- #undef GDBUDP /* Remote GDB debugging over UDP
- * (both may be set) */
- //#define EFI_DOWNGRADE_UX /* Downgrade UEFI user experience */
-
- #include <config/named.h>
- #include NAMED_CONFIG(general.h)
- #include <config/local/general.h>
- #include LOCAL_NAMED_CONFIG(general.h)
-
- #endif /* CONFIG_GENERAL_H */
|