If we detect (via STP) that a switch port is in a non-forwarding
state, then the link is marked as being temporarily blocked and DHCP
discovery will be deferred until the link becomes unblocked.
The timer used to decide when to give up waiting for ProxyDHCPOFFERs
is currently based on the time that DHCP discovery was started, and
makes no allowances for any time spent waiting for the link to become
unblocked. Consequently, if STP is used then the timeout for
ProxyDHCPOFFERs becomes essentially zero.
Fix by resetting the recorded start time whenever DHCP discovery is
deferred due to a blocked link.
Debugged-by: Sebastian Roth <sebastian.roth@zoho.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[peerdist] Avoid NULL pointer dereference for plaintext blocks
Avoid accidentally dereferencing a NULL cipher context pointer for
plaintext blocks (which are usually messages with a block length of
zero, indicating a missing block).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tcpip] Avoid generating positive zero for transmitted UDP checksums
TCP/IP checksum fields are one's complement values and therefore have
two possible representations of zero: positive zero (0x0000) and
negative zero (0xffff).
In RFC768, UDP over IPv4 exploits this redundancy to repurpose the
positive representation of zero (0x0000) to mean "no checksum
calculated"; checksums are optional for UDP over IPv4.
In RFC2460, checksums are made mandatory for UDP over IPv4. The
wording of the RFC is such that the UDP header is mandated to use only
the negative representation of zero (0xffff), rather than simply
requiring the checksum to be correct but allowing for either
representation of zero to be used.
In RFC1071, an example algorithm is given for calculating the TCP/IP
checksum. This algorithm happens to produce only the positive
representation of zero (0x0000); this is an artifact of the way that
unsigned arithmetic is used to calculate a signed one's complement
sum (and its final negation).
A common misconception has developed (exemplified in RFC1624) that
this artifact is part of the specification. Many people have assumed
that the checksum field should never contain the negative
representation of zero (0xffff).
A sensible receiver will calculate the checksum over the whole packet
and verify that the result is zero (in whichever representation of
zero happens to be generated by the receiver's algorithm). Such a
receiver will not care which representation of zero happens to be used
in the checksum field.
However, there are receivers in existence which will verify the
received checksum the hard way: by calculating the checksum over the
remainder of the packet and comparing the result against the checksum
field. If the representation of zero used by the receiver's algorithm
does not match the representation of zero used by the transmitter (and
so placed in the checksum field), and if the receiver does not
explicitly allow for both representations to compare as equal, then
the receiver may reject packets with a valid checksum.
For UDP, the combined RFCs effectively mandate that we should generate
only the negative representation of zero in the checksum field.
For IP, TCP and ICMP, the RFCs do not mandate which representation of
zero should be used, but the misconceptions which have grown up around
RFC1071 and RFC1624 suggest that it would be least surprising to
generate only the positive representation of zero in the checksum
field.
Fix by ensuring that all of our checksum algorithms generate only the
positive representation of zero, and explicitly inverting this in the
case of transmitted UDP packets.
Reported-by: Wissam Shoukair <wissams@mellanox.com>
Tested-by: Wissam Shoukair <wissams@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[pxe] Populate ciaddr in fake PXE Boot Server ACK packet
We currently do not populate the ciaddr field in the constructed PXE
Boot Server ACK packet. This causes a WDS server to respond with a
broadcast packet, which is then ignored by wdsmgfw.efi since it does
not match the specified IP address filter.
Fix by populating ciaddr within the constructed PXE Boot Server ACK
packet.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[dhcp] Do not skip ProxyDHCPREQUEST if next-server is empty
We attempt to mimic the behaviour of Intel's PXE ROM by skipping the
separate ProxyDHCPREQUEST if the ProxyDHCPOFFER already contains a
boot filename or a PXE boot menu.
Experimentation reveals that Intel's PXE ROM will also check for a
non-empty next-server address alongside the boot filename. Update our
test to match this behaviour.
Reported-by: Wissam Shoukair <wissams@mellanox.com>
Tested-by: Wissam Shoukair <wissams@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 09b057c ("[settings] Remove "uristring" setting type") removed
support for URI-encoded settings via the "uristring" setting type, on
the basis that such encoding was no longer necessary to avoid problems
with the command line parser.
Other valid use cases for the "uristring" setting type do exist: for
example, a password containing a '/' character expanded via
chain http://username:${password:uristring}@server.name/boot.php
Restore the existence of the "uristring" setting, avoiding the
potentially large stack allocations that were used in the old code
prior to commit 09b057c ("[settings] Remove "uristring" setting
type").
Requested-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[dhcp] Allow pseudo-DHCP servers to use pseudo-identifiers
Some ProxyDHCP servers and PXE boot servers do not specify a DHCP
server identifier via option 54. We currently work around this in a
variety of ad-hoc ways:
- if a ProxyDHCPACK has no server identifier then we treat it as
having the correct server identifier,
- if a boot server ACK has no server identifier then we use the
packet's source IP address as the server identifier.
Introduce the concept of a DHCP server pseudo-identifier, defined as
being:
- the server identifier (option 54), or
- if there is no server identifier, then the next-server address
(siaddr),
- if there is no server identifier or next-server address, then the
DHCP packet's source IP address.
Use the pseudo-identifier in place of the server identifier when
handling ProxyDHCP and PXE boot server responses.
Originally-fixed-by: Wissam Shoukair <wissams@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[ipoib] Fix a race when chain-loading undionly.kpxe in IPoIB
The Infiniband link status change callback ipoib_link_state_changed()
may be called while the IPoIB device is closed, in which case there
will not be an IPoIB queue pair to be joined to the IPv4 broadcast
group. This leads to NULL pointer dereferences in ib_mcast_attach()
and ib_mcast_detach().
Fix by not attempting to join (or leave) the broadcast group unless we
actually have an IPoIB queue pair.
Signed-off-by: Wissam Shoukair <wissams@mellanox.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[http] Rewrite HTTP core to support content encodings
Rewrite the HTTP core to allow for the addition of arbitrary content
encoding mechanisms, such as PeerDist and gzip.
The core now exposes http_open() which can be used to create requests
with an explicitly selected HTTP method, an optional requested content
range, and an optional request body. A simple wrapper provides the
preexisting behaviour of creating either a GET request or an
application/x-www-form-urlencoded POST request (if the URI includes
parameters).
The HTTP SAN interface is now implemented using the generic block
device translator. Individual blocks are requested using http_open()
to create a range request.
Server connections are now managed via a connection pool; this allows
for multiple requests to the same server (e.g. for SAN blocks) to be
completely unaware of each other. Repeated HTTPS connections to the
same server can reuse a pooled connection, avoiding the per-connection
overhead of establishing a TLS session (which can take several seconds
if using a client certificate).
Support for HTTP SAN booting and for the Basic and Digest
authentication schemes is now optional and can be controlled via the
SANBOOT_PROTO_HTTP, HTTP_AUTH_BASIC, and HTTP_AUTH_DIGEST build
configuration options in config/general.h.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[crypto] Support SHA-{224,384,512} in X.509 certificates
Add support for SHA-224, SHA-384, and SHA-512 as digest algorithms in
X.509 certificates, and allow the choice of public-key, cipher, and
digest algorithms to be configured at build time via config/crypto.h.
Originally-implemented-by: Tufan Karadere <tufank@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tls] Do not access beyond the end of a 24-bit integer
The current implementation handles big-endian 24-bit integers (which
occur in several TLS record types) by treating them as big-endian
32-bit integers which are shifted by 8 bits. This can result in
"Invalid read" errors when running under valgrind, if the 24-bit field
happens to be exactly at the end of an I/O buffer.
Fix by ensuring that we touch only the three bytes which comprise the
24-bit integer.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[netdevice] Allow network devices to disclaim IRQ support at runtime
VLAN and 802.11 devices use a network device operations structure that
wraps an underlying structure. For example, the vlan_operations
structure wraps the network device operations structure of the
underlying trunk device. This can cause false positives from the
current implementation of netdev_irq_supported(), which will always
report that VLAN devices support interrupts since it has no visibility
into the support provided by the underlying trunk device.
Fix by allowing network devices to explicitly flag that interrupts are
not supported, despite the presence of an irq() method.
Originally-fixed-by: Wissam Shoukair <wissams@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iscsi_tx_done() is missing "break" statements at the end of each case.
(Fortunately, this happens not to cause a bug in practice, since
iscsi_login_request_done() is effectively a no-op when completing a
data-out PDU.)
Reported-by: Wissam Shoukair <wissams@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[ipv4] Allow IPv4 socket addresses to include a scope ID
Extend the IPv6 concept of "scope ID" (indicating the network device
index) to IPv4 socket addresses, so that IPv4 multicast transmissions
may specify the transmitting network device.
The scope ID is not (currently) exposed via the string representation
of the socket address, since IPv4 does not use the IPv6 concept of
link-local addresses (which could legitimately be specified in a URI).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[ipv4] Redefine IP address constants to avoid unnecessary byte swapping
Redefine various IPv4 address constants and testing macros to avoid
unnecessary byte swapping at runtime, and slightly rename the macros
to prevent code from accidentally using the old definitions.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[netdevice] Avoid using zero as a network device index
Avoid using zero as a network device index, so that a zero
sin6_scope_id can be used to mean "unspecified" (rather than
unintentionally meaning "net0").
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[ipv6] Treat a missing network device name as "netX"
When an IPv6 socket address string specifies a link-local or multicast
address but does not specify the requisite network device name
(e.g. "fe80::69ff:fe50:5845" rather than "fe80::69ff:fe50:5845%net0"),
assume the use of "netX".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide a generic inject_fault() function that can be used to inject
random faults with configurable probabilities.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tcp] Gracefully close connections during shutdown
We currently do not wait for a received FIN before exiting to boot a
loaded OS. In the common case of booting from an HTTP server, this
means that the TCP connection is left consuming resources on the
server side: the server will retransmit the FIN several times before
giving up.
Fix by initiating a graceful close of all TCP connections and waiting
(for up to one second) for all connections to finish closing
gracefully (i.e. for the outgoing FIN to have been sent and ACKed, and
for the incoming FIN to have been received and ACKed at least once).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[ipoib] Attempt to generate ARPs as needed to repopulate REMAC cache
The only way to map an eIPoIB MAC address (REMAC) to an IPoIB MAC
address is to intercept an incoming ARP request or reply.
If we do not have an REMAC cache entry for a particular destination
MAC address, then we cannot transmit the packet. This can arise in at
least two situations:
- An external program (e.g. a PXE NBP using the UNDI API) may attempt
to transmit to a destination MAC address that has been obtained by
some method other than ARP.
- Memory pressure may have caused REMAC cache entries to be
discarded. This is fairly likely on a busy network, since REMAC
cache entries are created for all received (broadcast) ARP
requests. (We can't sensibly avoid creating these cache entries,
since they are required in order to send an ARP reply, and when we
are being used via the UNDI API we may have no knowledge of which
IP addresses are "ours".)
Attempt to ameliorate the situation by generating a semi-spurious ARP
request whenever we find a missing REMAC cache entry. This will
hopefully trigger an ARP reply, which would then provide us with the
information required to populate the REMAC cache.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
If the link is blocked (e.g. due to a Spanning Tree Protocol port not
yet forwarding packets) then defer DHCP discovery until the link
becomes unblocked.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[stp] Add support for detecting Spanning Tree Protocol non-forwarding ports
A fairly common end-user problem is that the default configuration of
a switch may leave the port in a non-forwarding state for a
substantial length of time (tens of seconds) after link up. This can
cause iPXE to time out and give up attempting to boot.
We cannot force the switch to start forwarding packets sooner, since
any attempt to send a Spanning Tree Protocol bridge PDU may cause the
switch to disable our port (if the switch happens to have the Bridge
PDU Guard feature enabled for the port).
For non-ancient versions of the Spanning Tree Protocol, we can detect
whether or not the port is currently forwarding and use this to inform
the network device core that the link is currently blocked.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[netdevice] Add a generic concept of a "blocked link"
When Spanning Tree Protocol (STP) is used, there may be a substantial
delay (tens of seconds) from the time that the link goes up to the
time that the port starts forwarding packets.
Add a generic concept of a "blocked link" (i.e. a link which is up but
which is not expected to communicate successfully), and allow "ifstat"
to indicate when a link is blocked.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[ethernet] Add minimal support for receiving LLC frames
In some Ethernet framing variants the two-byte protocol field is used
as a length, with the Ethernet header being followed by an IEEE 802.2
LLC header. The first two bytes of the LLC header are the DSAP and
SSAP.
If the received Ethernet packet appears to use this framing, then
interpret the two-byte DSAP and SSAP as being the network-layer
protocol. This allows support for receiving Spanning Tree Protocol
frames (which use an LLC header with {DSAP,SSAP}=0x4242) to be added
without requiring a full LLC protocol layer.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tcp] Do not shrink window when discarding received packets
We currently shrink the TCP window permanently if we are ever forced
(by a low-memory condition) to discard a previously received TCP
packet. This behaviour was intended to reduce the number of
retransmissions in a lossy network, since lost packets might
potentially result in the entire window contents being retransmitted.
Since commit e0fc8fe ("[tcp] Implement support for TCP Selective
Acknowledgements (SACK)") the cost of lost packets has been reduced by
around one order of magnitude, and the reduction in the window size
(which affects the maximum throughput) is now the more significant
cost.
Remove the code which reduces the TCP maximum window size when a
received packet is discarded.
Reported-by: Wissam Shoukair <wissams@mellanox.com>
Tested-by: Wissam Shoukair <wissams@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[neighbour] Return success when deferring a packet
Deferral of a packet for neighbour discovery is not really an error.
If we fail to discover a neighbour then the failure will eventually be
reported by the call to neighbour_destroy() when any outstanding I/O
buffers are discarded.
The current behaviour breaks PXE booting on FreeBSD, which seems to
treat the error return from PXENV_UDP_WRITE as a fatal error and so
never proceeds to poll PXENV_UDP_READ (and hence never allows iPXE to
receive the ARP reply and send the deferred UDP packet).
Change neighbour_tx() to return success when deferring a packet. This
fixes interoperability with FreeBSD and removes transient neighbour
cache misses from the "ifstat" error output, while leaving genuine
neighbour discovery failures visible via "ifstat" (once neighbour
discovery times out, or the interface is closed).
Debugged-by: Wissam Shoukair <wissams@mellanox.com>
Tested-by: Wissam Shoukair <wissams@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[base16] Add buffer size parameter to base16_encode() and base16_decode()
The current API for Base16 (and Base64) encoding requires the caller
to always provide sufficient buffer space. This prevents the use of
the generic encoding/decoding functionality in some situations, such
as in formatting the hex setting types.
Implement a generic hex_encode() (based on the existing
format_hex_setting()), implement base16_encode() and base16_decode()
in terms of the more generic hex_encode() and hex_decode(), and update
all callers to provide the additional buffer length parameter.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This fixes "initialization discards 'const' qualifier from pointer
target type" warnings with GCC 5.1.0.
Signed-off-by: Christian Hesse <mail@eworm.de>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tcp] Implement support for TCP Selective Acknowledgements (SACK)
The TCP Selective Acknowledgement option (specified in RFC2018)
provides a mechanism for the receiver to indicate packets that have
been received out of order (e.g. due to earlier dropped packets).
iPXE often operates in environments in which there is a high
probability of packet loss. For example, the legacy USB keyboard
emulation in some BIOSes involves polling the USB bus from within a
system management interrupt: this introduces an invisible delay of
around 500us which is long enough for around 40 full-length packets to
be dropped. Similarly, almost all 1Gbps USB2 devices will eventually
end up dropping packets because the USB2 bus does not provide enough
bandwidth to sustain a 1Gbps stream, and most devices will not provide
enough internal buffering to hold a full TCP window's worth of
received packets.
Add support for sending TCP Selective Acknowledgements. This provides
the sender with more detailed information about which packets have
been lost, and so allows for a more efficient retransmission strategy.
We include a SACK-permitted option in our SYN packet, since
experimentation shows that at least Linux peers will not include a
SACK-permitted option in the SYN-ACK packet if one was not present in
the initial SYN. (RFC2018 does not seem to mandate this behaviour,
but it is consistent with the approach taken in RFC1323.) We ignore
any received SACK options; this is safe to do since SACK is only ever
advisory and we never have to send non-trivial amounts of data.
Since our TCP receive queue is a candidate for cache discarding under
low memory conditions, we may end up discarding data that has been
reported as received via a SACK option. This is permitted by RFC2018.
We follow the stricture that SACK blocks must not report data which is
no longer held by the receiver: previously-reported blocks are
validated against the current receive queue before being included
within the current SACK block list.
Experiments in a qemu VM using forced packet drops (by setting
NETDEV_DISCARD_RATE to 32) show that implementing SACK improves
throughput by around 400%.
Experiments with a USB2 NIC (an SMSC7500) show that implementing SACK
improves throughput by around 700%, increasing the download rate from
35Mbps up to 250Mbps (which is approximately the usable bandwidth
limit for USB2).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Microsoft IIS supports only MD5-sess for Digest authentication.
Requested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown