The name "vesafb" is intrinsically specific to a BIOS environment.
Generalise the build configuration option CONSOLE_VESAFB to
CONSOLE_FRAMEBUFFER, in preparation for adding EFI framebuffer
support.

Existing configurations using CONSOLE_VESAFB will continue to work.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

A fairly common end-user problem is that the default configuration of
a switch may leave the port in a non-forwarding state for a
substantial length of time (tens of seconds) after link up.  This can
cause iPXE to time out and give up attempting to boot.

We cannot force the switch to start forwarding packets sooner, since
any attempt to send a Spanning Tree Protocol bridge PDU may cause the
switch to disable our port (if the switch happens to have the Bridge
PDU Guard feature enabled for the port).

For non-ancient versions of the Spanning Tree Protocol, we can detect
whether or not the port is currently forwarding and use this to inform
the network device core that the link is currently blocked.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

At some point in the past few years, binutils became more aggressive
at removing unused symbols.  To function as a symbol requirement, a
relocation record must now be in a section marked with @progbits and
must not be in a section which gets discarded during the link (either
via --gc-sections or via /DISCARD/).

Update REQUIRE_SYMBOL() to generate relocation records meeting these
criteria.  To minimise the impact upon the final binary size, we use
existing symbols (specified via the REQUIRING_SYMBOL() macro) as the
relocation targets where possible.  We use R_386_NONE or R_X86_64_NONE
relocation types to prevent any actual unwanted relocation taking
place.  Where no suitable symbol exists for REQUIRING_SYMBOL() (such
as in config.c), the macro PROVIDE_REQUIRING_SYMBOL() can be used to
generate a one-byte-long symbol to act as the relocation target.

If there are versions of binutils for which this approach fails, then
the fallback will probably involve killing off REQUEST_SYMBOL(),
redefining REQUIRE_SYMBOL() to use the current definition of
REQUEST_SYMBOL(), and postprocessing the linked ELF file with
something along the lines of "nm -u | wc -l" to check that there are
no undefined symbols remaining.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Relicense files for which I am the sole author (as identified by
util/relicense.pl).

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Add the standard warranty disclaimer and Free Software Foundation
address paragraphs to the licence text where these are not currently
present.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Signed-off-by: Michael Brown <mcb30@ipxe.org>

The block device interface used in gPXE predates the invention of even
the old gPXE data-transfer interface, let alone the current iPXE
generic asynchronous interface mechanism.  Bring this old code up to
date, with the following benefits:

 o  Block device commands can be cancelled by the requestor.  The INT 13
    layer uses this to provide a global timeout on all INT 13 calls,
    with the result that an unexpected passive failure mode (such as
    an iSCSI target ACKing the request but never sending a response)
    will lead to a timeout that gets reported back to the INT 13 user,
    rather than simply freezing the system.

 o  INT 13,00 (reset drive) is now able to reset the underlying block
    device.  INT 13 users, such as DOS, that use INT 13,00 as a method
    for error recovery now have a chance of recovering.

 o  All block device commands are tagged, with a numerical tag that
    will show up in debugging output and in packet captures; this will
    allow easier interpretation of bug reports that include both
    sources of information.

 o  The extremely ugly hacks used to generate the boot firmware tables
    have been eradicated and replaced with a generic acpi_describe()
    method (exploiting the ability of iPXE interfaces to pass through
    methods to an underlying interface).  The ACPI tables are now
    built in a shared data block within .bss16, rather than each
    requiring dedicated space in .data16.

 o  The architecture-independent concept of a SAN device has been
    exposed to the iPXE core through the sanboot API, which provides
    calls to hook, unhook, boot, and describe SAN devices.  This
    allows for much more flexible usage patterns (such as hooking an
    empty SAN device and then running an OS installer via TFTP).

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Signed-off-by: Michael Brown <mcb30@ipxe.org>

For extremely tight space requirements and specific applications, it is
sometimes desirable to create gPXE images that cannot provide the PXE API
functionality to client programs. Add a configuration header option,
PXE_STACK, that can be removed to remove this stack. Also add PXE_MENU
to control the PXE boot menu, which most uses of gPXE do not need.

Signed-off-by: Marty Connor <mdc@etherboot.org>