At some point in the past few years, binutils became more aggressive
at removing unused symbols. To function as a symbol requirement, a
relocation record must now be in a section marked with @progbits and
must not be in a section which gets discarded during the link (either
via --gc-sections or via /DISCARD/).
Update REQUIRE_SYMBOL() to generate relocation records meeting these
criteria. To minimise the impact upon the final binary size, we use
existing symbols (specified via the REQUIRING_SYMBOL() macro) as the
relocation targets where possible. We use R_386_NONE or R_X86_64_NONE
relocation types to prevent any actual unwanted relocation taking
place. Where no suitable symbol exists for REQUIRING_SYMBOL() (such
as in config.c), the macro PROVIDE_REQUIRING_SYMBOL() can be used to
generate a one-byte-long symbol to act as the relocation target.
If there are versions of binutils for which this approach fails, then
the fallback will probably involve killing off REQUEST_SYMBOL(),
redefining REQUIRE_SYMBOL() to use the current definition of
REQUEST_SYMBOL(), and postprocessing the linked ELF file with
something along the lines of "nm -u | wc -l" to check that there are
no undefined symbols remaining.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[legal] Relicense files under GPL2_OR_LATER_OR_UBDL
These files cannot be automatically relicensed by util/relicense.pl
since they either contain unusual but trivial contributions (such as
the addition of __nonnull function attributes), or contain lines
dating back to the initial git revision (and so require manual
knowledge of the code's origin).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[pxe] Maintain a queue for received PXE UDP packets
Some devices return multiple packets in a single poll. Handle such
devices gracefully by enqueueing received PXE UDP packets (along with
a pseudo-header to hold the IPv4 addresses and port numbers) and
dequeueing them on subsequent calls to PXENV_UDP_READ.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tftp] Explicitly abort connection whenever parent interface is closed
Fetching the TFTP file size is currently implemented via a custom
"tftpsize://" protocol hack. Generalise this approach to instead
close the TFTP connection whenever the parent data-transfer interface
is closed.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[profile] Allow interrupts to be excluded from profiling results
Interrupt processing adds noise to profiling results. Allow
interrupts (from within protected mode) to be profiled separately,
with time spent within the interrupt handler being excluded from any
other profiling currently in progress.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[pcbios] Do not switch to real mode to sleep the CPU
Now that we can handle interrupts while in protected mode, there is no
need to switch to real mode just to halt the CPU.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[pcbios] Do not switch to real mode to check for timer interrupt
The currticks() function is called at least once per TCP packet, and
so is performance-critical. Switching to real mode just to allow the
timer interrupt to fire is expensive when running inside a virtual
machine, and imposes a significant performance cost.
Fix by enabling interrupts without switching to real mode. This
results in an approximately 100% increase in download speed when
running under KVM.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
We now have the ability to handle interrupts while in protected mode,
and so no longer need to set up a dedicated interrupt descriptor table
while running COM32 executables.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[image] Add "--timeout" parameter to image downloading commands
iPXE will detect timeout failures in several situations: network
link-up, DHCP, TCP connection attempts, unacknowledged TCP data, etc.
This does not cover all possible circumstances. For example, if a
connection to a web server is successfully established and the web
server acknowledges the HTTP request but never sends any data in
response, then no timeout will be triggered. There is no timeout
defined within the HTTP specifications, and the underlying TCP
connection will not generate a timeout since it has no way to know
that the HTTP layer is expecting to receive data from the server.
Add a "--timeout" parameter to "imgfetch", "chain", etc. If no
progress is made (i.e. no data is downloaded) within the timeout
period, then the download will be aborted.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[cmdline] Rename "console" command's --bpp option to --depth
Rename the "--bpp" option to "--depth", to free up the single-letter
option "-b" for "--bottom" in preparation for adding margin support.
This does not break backwards compatibility with documented features,
since the "console" command has not yet been documented.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[vesafb] Allow for an arbitrary margin around the text area
Allow for an arbitrary margin to be specified in the console
configuration. If the actual screen size does not match the requested
screen size, then update any margins specified so that they remain in
the same place relative to the requested screen size. If margins are
unspecified (i.e. zero), then leave them as zero.
The underlying assumption here is that any specified margins are
likely to describe an area within a background picture, and so should
remain in the same place relative to that background picture.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[vesafb] Set "magic" colour to transparent when a background picture is used
Use the magic colour facility to cause the user interface background
to become transparent when we have a background picture.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[vesafb] Work around data corruption bug in bochs/qemu VBE implementation
The vgabios used by bochs and qemu (and other virtualisation products)
has a bug in its implementation of INT 10,4f00 which causes the high
16 bits of %ebx and %edx to become corrupted.
The vgabios code uses a "pushaw"/"popaw" pair to preserve the low 16
bits of all non-segment registers. The vgabios code is compiled using
bcc, which generates 8086-compatible code and so never touches the
high 16 bits of the 32-bit registers. However, the function
vbe_biosfn_return_controller_information() includes the line:
size_64k = (Bit16u)((Bit32u)cur_info->info.XResolution *
cur_info->info.XResolution *
cur_info->info.BitsPerPixel) >> 19;
which generates an implicit call to the "lmulul" function. This
function is implemented in vbe.c as:
; helper function for memory size calculation
lmulul:
and eax, #0x0000FFFF
shl ebx, #16
or eax, ebx
SEG SS
mul eax, dword ptr [di]
mov ebx, eax
shr ebx, #16
ret
which modifies %eax, %ebx, and %edx (as a result of the "mul"
instruction, which places its result into %edx:%eax).
Work around this problem by marking %ebx and %edx as being clobbered
by the call to INT 10,4f00. (%eax is already used as an output
register, so does not need to be on the clobber list.)
Reported-by: Oliver Rath <rath@mglug.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Explicitly separate the concept of a completed fetched setting
The fetch_setting() family of functions may currently modify the
definition of the specified setting (e.g. to add missing type
information). Clean up this interface by requiring callers to provide
an explicit buffer to contain the completed definition of the fetched
setting, if required.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[vesafb] Select an optimal mode, rather than the first acceptable mode
There is no requirement for VBE modes to be listed in increasing order
of resolution. With the present logic, this can cause e.g. a 1024x768
mode to be selected if the user asks for 640x480, if the 1024x768 mode
is earlier in the mode list.
Define a scoring system for modes as
score = ( width * height - bpp )
and choose the mode with the lowest score among all acceptable modes.
This should prefer to choose the mode closest to the requested
resolution, with a slight preference for higher colour depths.
Reported-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[vesafb] Skip modes for which we cannot get mode information
The VirtualBox BIOS fails to retrieve mode information (with status
0x0100) for some modes within the mode list. Skip any such modes,
rather than treating this as a fatal error.
Reported-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The VESA frame buffer console uses the VESA BIOS extensions (VBE) to
enumerate video modes, selects an appropriate mode, and then hands off
to the generic frame buffer code.
The font is extracted from the VGA BIOS, avoiding the need to provide
an external font file.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Most network upper-layer drivers do not implement all three methods
(probe, notify, and remove). Save code by making all methods
optional.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[pxe] Always retrieve cached DHCPACK and apply to relevant network device
When chainloading, always retrieve the cached DHCPACK packet from the
underlying PXE stack, and apply it as the original contents of the
"net<X>.dhcp" settings block. This allows cached DHCP settings to be
used for any chainloaded iPXE binary (not just undionly.kkpxe).
This change eliminates the undocumented "use-cached" setting. Issuing
the "dhcp" command will now always result in a fresh DHCP request.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 238050d ("[build] Work around bug in gcc >= 4.8") works around
one instance of a bug in recent versions of gcc, in which "ebp" cannot
be specified within an asm clobber list.
Some versions of gcc seem to exhibit the same bug on other points in
the codebase. Fix by changing all instances of "ebp" in a clobber
list to use the push/pop %ebp workaround instead.
Originally-implemented-by: Víctor Román Archidona <contacto@victor-roman.es>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Clarify usage of the term "named setting"
There are currently two conflicting usages of the term "named setting"
within iPXE: one refers to predefined settings (such as show up in the
"config" UI), the other refers to settings identified by a name (such
as "net0.dhcp/ip").
Split these usages into the term "predefined setting" and "named
setting" to avoid ambiguity.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
gcc 4.8 and 4.9 fail to compile pxe_call.c with the error "bp cannot
be used in asm here". Other points in the codebase which use "ebp" in
the asm clobber list do not seem to be affected.
Unfortunately gcc provides no way to specify %ebp as an output
register, so we cannot use this as a workaround. The only viable
solution is to explicitly push/pop %ebp within the asm itself. This
is ugly for two reasons: firstly, it may be unnecessary; secondly, it
may cause gcc to generate invalid %esp-relative addresses if the asm
happens to use memory operands. This specific block of asm uses no
memory operands and so will not generate invalid code.
Reported-by: Daniel P. Berrange <berrange@redhat.com>
Reported-by: Christian Hesse <list@eworm.de>
Originally-fixed-by: Christian Hesse <list@eworm.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Create an explicit concept of "settings scope" and eliminate the magic
values used for numerical setting tags.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Abstract out the ability to reboot the system to a separate reboot()
function (with platform-specific implementations), add an EFI
implementation, and make the existing "reboot" command available under
EFI.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tftp] Allow TFTP block size to be controlled via the PXE TFTP API
The PXE TFTP API allows the caller to request a particular TFTP block
size. Since mid-2008, iPXE has appended a "?blksize=xxx" parameter to
the TFTP URI constructed internally; nothing has ever parsed this
parameter. Nobody seems to have cared that this parameter has been
ignored for almost five years.
Fix by using xfer_window(), which provides a fairly natural way to
convey the block size information from the PXE TFTP API to the TFTP
protocol layer.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[ipoib] Expose Ethernet-compatible eIPoIB link-layer addresses and headers
Almost all clients of the raw-packet interfaces (UNDI and SNP) can
handle only Ethernet link layers. Expose an Ethernet-compatible link
layer to local clients, while remaining compatible with IPoIB on the
wire. This requires manipulation of ARP (but not DHCP) packets within
the IPoIB driver.
This is ugly, but it's the only viable way to allow IPoIB devices to
be driven via the raw-packet interfaces.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown