These files cannot be automatically relicensed by util/relicense.pl
since they either contain unusual but trivial contributions (such as
the addition of __nonnull function attributes), or contain lines
dating back to the initial git revision (and so require manual
knowledge of the code's origin).

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>

Allow the link layer to directly report whether or not a packet is
multicast or broadcast at the time of calling pull(), rather than
relying on heuristics to determine this at a later stage.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

FCoE requires the use of fabric-provided MAC addresses, which breaks
the assumption that the net device's MAC address is implicitly the
source address for net_tx() and the (unicast) destination address for
net_rx().

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Avoid a tedious timeout delay when attempting to issue a command over
a network device that has been closed.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

The block device interface used in gPXE predates the invention of even
the old gPXE data-transfer interface, let alone the current iPXE
generic asynchronous interface mechanism.  Bring this old code up to
date, with the following benefits:

 o  Block device commands can be cancelled by the requestor.  The INT 13
    layer uses this to provide a global timeout on all INT 13 calls,
    with the result that an unexpected passive failure mode (such as
    an iSCSI target ACKing the request but never sending a response)
    will lead to a timeout that gets reported back to the INT 13 user,
    rather than simply freezing the system.

 o  INT 13,00 (reset drive) is now able to reset the underlying block
    device.  INT 13 users, such as DOS, that use INT 13,00 as a method
    for error recovery now have a chance of recovering.

 o  All block device commands are tagged, with a numerical tag that
    will show up in debugging output and in packet captures; this will
    allow easier interpretation of bug reports that include both
    sources of information.

 o  The extremely ugly hacks used to generate the boot firmware tables
    have been eradicated and replaced with a generic acpi_describe()
    method (exploiting the ability of iPXE interfaces to pass through
    methods to an underlying interface).  The ACPI tables are now
    built in a shared data block within .bss16, rather than each
    requiring dedicated space in .data16.

 o  The architecture-independent concept of a SAN device has been
    exposed to the iPXE core through the sanboot API, which provides
    calls to hook, unhook, boot, and describe SAN devices.  This
    allows for much more flexible usage patterns (such as hooking an
    empty SAN device and then running an OS installer via TFTP).

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Guarantee that a retry timer cannot go out of scope while the timer is
running, and provide a guarantee to the expiry callback that the timer
will remain in scope during the entire callback (similar to the
guarantee provided to interface methods).

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Declarations without the accompanying __table_entry cause misalignment
of the table entries when using gcc 4.5.  Fix by adding the
appropriate __table_entry macro or (where possible) by removing
unnecessary forward declarations.

Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>

Standardise on using timer_init() to initialise an embedded retry
timer, to match the coding style used by other embedded objects.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Standardise on using ref_init() to initialise an embedded reference
count, to match the coding style used by other embedded objects.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Access to the gpxe.org and etherboot.org domains and associated
resources has been revoked by the registrant of the domain.  Work
around this problem by renaming project from gPXE to iPXE, and
updating URLs to match.

Also update README, LOG and COPYRIGHTS to remove obsolete information.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

IPoIB has a link-layer broadcast address that varies according to the
partition key.  We currently go through several contortions to pretend
that the link-layer address is a fixed constant; by making the
broadcast address a property of the network device rather than the
link-layer protocol it will be possible to simplify IPoIB's broadcast
handling.

Move the icky call to step() from aoe.c to ata.c; this takes it at
least one step further away from where it really doesn't belong.

Unfortunately, AoE has the ugly aoe_discover() mechanism which means
that we still have a step() loop in aoe.c for now; this needs to be
replaced at some future point.

Add FILE_LICENCE declarations to almost all files that make up the
various standard builds of gPXE.

The AoE spec does not specify that the source MAC address of a
received packet actually matches the MAC address of the AoE target.
In principle an AoE server can respond to an AoE request on any
interface available to it, which may not be an address configured to
accept AoE requests.

This issue is resolved by implementing AoE device discovery.  The
purpose of AoE discovery is to find out which addresses an AoE target
can use for requests.  An AoE configuration command is sent when the
AoE attach is attempted.  The AoE target must respond to that
configuration query from an interface that can accept requests.

Based on a patch from Ryan Thomas <ryan@coraid.com>

The retry timer needs to be running as soon as we know that we are
trying to transmit a command.  If transmission fails because of a
temporary error condition, then the timer will allow us to retry the
transmission later.

list.

Added FEATURE() macros to most relevant (non-driver) files.

and generate DHCP options to indicate features to DHCP server (and to
PXE NBPs).

iSCSI hack.

structures.

DHCP still broken and #if 0'd out.

Achieved via Perl using:

perl -pi -e 's/pk_buff/io_buffer/g; s/Packet buffer/I\/O buffer/ig; ' \
	-e 's/pkbuff\.h/iobuf.h/g; s/pkb_/iob_/g; s/_pkb/_iob/g; ' \
	-e 's/pkb/iobuf/g; s/PKB/IOB/g;'

will enable us to cascade async operations, which is necessary in order to
properly support DNS.  (For example, an HTTP request may have to redirect
to a new location and will have to perform a new DNS lookup, so we can't
just rely on doing the name lookup at the time of parsing the initial
URL).

Anything other than HTTP is probably broken right now; I'll fix the others
up asap.

Kill off the static single net device and move to proper dynamic
registration (which we need with the new device model).

Break the (flawed) assumption that all network-layer protocols can use
ARP; such network-layer protocols (i.e. IPv4) must now register as an ARP
protocol using ARP_NET_PROTOCOL() and provide a single method for checking
the existence of a local network-layer address.

AoE now uses the retry timer mechanism.

elegant, but it works).

async_wait(), though we may wish to move this higher up the stack, and
consider making the block device model asynchronous.  (There is only a
marginal cost for synchronous devices, since they can simply call
async_done() before returning; async_wait() will work seamlessly in this
situation).

Removed data_in_len and data_out_len from ata_command structure; the
lengths are implied by the sector count and the presence of the data_in
or data_out pointers.

Changed AoE code to use subcommands by default, and made aoe_issue()
nonblocking (with completion via async_wait()).

  Cannot yet handle reads of more than two sectors

  No retransmission

  No way to find out a target's MAC address (this proof of concept uses
  broadcasts)

These limitations shall not last long!  :)