[netdevice] Allow link layer to report broadcast/multicast packets via pull()
Allow the link layer to directly report whether or not a packet is
multicast or broadcast at the time of calling pull(), rather than
relying on heuristics to determine this at a later stage.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
According to section 14.23 of RFC2616, an HTTP Host header without
port implies the default port is used. Thus, when fetching from
anywhere but port 80 for HTTP or 443 for HTTPS, the port ought to be
explicitly given in that header. Otherwise, some servers might fail
to associate the request with the correct virtual host or generate
incorrect self-referencing URLs.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The iSCSI TX process can now be woken up by the TCP socket via
xfer_window_changed(), so it is no longer valid to assume that
iscsi_tx_step() can be called in state ISCSI_TX_IDLE only immediately
after completing a transmission.
Fix by calling iscsi_tx_done() only upon a transition into state
ISCSI_TX_IDLE.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide support for HTTP range requests, and expose this functionality
via the iPXE block device API. This allows SAN booting from a root
path such as:
sanboot http://boot.ipxe.org/freedos/fdfullcd.iso
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[process] Pass containing object pointer to process step() methods
Give the step() method a pointer to the containing object, rather than
a pointer to the process. This is consistent with the operation of
interface methods, and allows a single function to serve as both an
interface method and a process step() method.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
ftp_data_deliver() does nothing except pass through the received data
to the xfer interface, and so can be eliminated by using a
pass-through interface.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
At the time of attempting ARP resolution, we already know the
transmitting network device. We can therefore record ARP errors using
netdev_tx_err() so that they show up in the output of "ifstat".
Inspired-by: Dominik Russenberger <dominik.russenberger@terreactive.ch>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[netdevice] Allow non-completion TX errors to be recorded
Allow TX errors to be recorded against a network device even when the
packet didn't make it as far as netdev_tx().
Inspired-by: Dominik Russenberger <dominik.russenberger@terreactive.ch>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[ipv4] Include network device metadata in packet traces
(Ab)use the "ident" field in transmitted IPv4 packets to convey
metadata about the network device. In particular:
bits 0-3 represent the low bits of the "RX" good packet counter
bits 4-7 represent the low bits of the "RXE" bad packet counter
bits 8-15 represent the transmitted packet sequence number
This allows some relevant information about the internal state of the
network device to be read out from a packet trace from a non-debug
build of iPXE. In particular, it allows a packet trace containing
packets transmitted by iPXE to indicate whether or not any packets
have been received by iPXE.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Booting from an HTTP SAN will require HTTP range requests, which are
defined only in HTTP/1.1 and above. HTTP/1.1 mandates support for
"Transfer-Encoding: chunked", so we must support it.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tcp] Update ts_recent whenever window is advanced
Commit 3f442d3 ("[tcp] Record ts_recent on first received packet")
failed to achieve its stated intention.
Fix this (and reduce the code size) by moving the ts_recent update to
tcp_rx_seq(). This is the code responsible for advancing the window,
called by both tcp_rx_syn() and tcp_rx_data(), and so the window check
is now redundant.
Reported-by: Frank Weed <zorbustheknight@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tftp] Avoid setting current working URI to "tftp://0.0.0.0/"
Set the current working URI to NULL rather than to "tftp://0.0.0.0/".
Reported-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
For devices that start in a link-down state, the user will see a
message such as:
[Link status: The socket is not connected (http://ipxe.org/38086001)]
Waiting for link-up on net0...
This is potentially misleading, since it suggests that there is a
genuine problem. Add a dedicated error message for "link down",
giving instead:
[Link status: Down (http://ipxe.org/38086101)]
Waiting for link-up on net0...
Reported-by: Tal Aloni <tal.aloni.il@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[netdevice] Mark devices as open only if opening succeeds
netdev_close() assumes that devices that are open are on the
open_list, which wasn't true if device specific opening failed.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 6861304 ("[tcp] Handle out-of-order received packets")
introduced a regression in which ts_recent would not be updated until
the first packet is received in the ESTABLISHED state, i.e. the
timestamp from the SYN+ACK packet would be ignored. This causes the
connection to be dropped by strictly-conforming TCP peers, such as
FreeBSD.
Fix by delaying the timestamp window check until after processing the
received SYN flag.
Reported-by: winders@sonnet.com
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Improve the appearance of the "config" user interface by ensuring that
settings appear in some kind of logical order.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Formalise notion of setting applicability
Expose a function setting_applies() to allow a caller to determine
whether or not a particular setting is applicable to a particular
settings block.
Restrict DHCP-backed settings blocks to accepting only DHCP-based
settings.
Restrict network device settings blocks to accepting only DHCP-based
settings and network device-specific settings such as "mac".
Inspired-by: Glenn Brown <glenn@myri.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The default initiator IQN is "iqn.2000-09.org.etherboot:UNKNOWN".
This is problematic for two reasons:
a) the etherboot.org domain (and hence the associated IQN namespace)
is not under the control of the iPXE project, and
b) some targets (correctly) refuse to allow concurrent connections
from different initiators using the same initiator IQN.
Solve both problems by changing the default initiator IQN to be
iqn.2010-04.org.ipxe:<hostname> if a hostname is set, or
iqn.2010-04.org.ipxe:<uuid> if no hostname is set.
Explicit initiator IQNs set via DHCP option 203 are not affected by
this change.
Unfortunately, this change is likely to break some existing
configurations, where ACL rules have been put in place referring to
the old default initiator IQN. Users may need to update ACLs, or
force the use of the old IQN using an iPXE script line such as
set initiator-iqn iqn.2000-09.org.etherboot:UNKNOWN
or a dhcpd.conf option such as
option iscsi-initiator-iqn "iqn.2000-09.org.etherboot:UNKNOWN"
Signed-off-by: Michael Brown <mcb30@ipxe.org>
After a more accurate reading of RFC 3720, it becomes clear how NOPs
are supposed to work. The current implementation (which just ignores
NOP-Ins) is sufficient to cope with NOP-Ins sent to update CmdSN, but
will need to be extended before it can cope with NOP-Ins sent as iSCSI
keepalives.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some iSCSI targets (observed with a Synology DS207+ NAS) send
unsolicited NOP-Ins to the initiator. RFC 3720 is remarkably unclear
and possibly self-contradictory on how NOPs are supposed to work, but
it seems as though we can legitimately just ignore any unsolicited
NOP-In PDU.
Reported-by: Marc Lecuyer <marc@maxiscreen.com>
Originally-implemented-by: Thomas Miletich <thomas.miletich@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[dhcp] Allow use of custom reallocation functions for DHCP option blocks
Allow functions other than realloc() to be used to reallocate DHCP
option block data, and specify the reallocation function at the time
of calling dhcpopt_init().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[dhcp] Remove redundant length fields in struct dhcp_packet
The max_len field is never used, and the len field is used only by
dhcp_tx(). Remove these two fields, and perform the necessary trivial
calculation in dhcp_tx() instead.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[dhcp] Use Ethernet-compatible chaddr, if possible
For IPoIB, we currently use the hardware address (i.e. the eight-byte
GUID) as the DHCP chaddr. This works, but some PXE servers (notably
Altiris RDP) refuse to respond if the chaddr field is anything other
than six bytes in length.
We already have the notion of an Ethernet-compatible link-layer
address, which is used in the iBFT (the design of which similarly
fails to account for non-Ethernet link layers). Use this as the first
preferred alternative to the actual link-layer address when
constructing the DHCP chaddr field.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some network cards automatically strip the VLAN header, providing the
VLAN tag via a side channel such as a completion queue entry. These
cards need to be able to report receive completions directly against
the relevant VLAN device.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[vlan] Use "-" instead of "." as separator in VLAN device names
VLAN device names have the form "netX.Y", e.g. "net0.5" for VLAN 5 on
net0. This use of "." conflicts with the use of "." as the
hierarchical separator in settings block names, with the result that
VLAN device settings cannot be accessed by name.
It would be trivial to treat the VLAN device settings as being a child
of the trunk device settings, but this would cause the VLAN device
settings to be applied to the trunk device: for example, setting
"net0.5/ip" would then apply the IP address to both net0.5 and net0.
Fix by changing the VLAN device name to use "-" instead of ".": the
VLAN device "net0.5" is now "net0-5".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Apply settings block name in register_settings()
Pass the settings block name as a parameter to register_settings(),
rather than defining it with settings_init() (and then possibly
changing it by directly manipulating settings->name).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown