IBM's iSCSI Firmware Initiator checks the UNDIROMID pointer in the
!PXE structure that gets created by the UNDI loader.  We didn't
previously fill this value in.

The IBM iSCSI Firmware Initiator complains that we don't have a bus
type field in the UNDI ROMID structure, so include one.

Commit f58cc3f introduced a temporary workaround for a bug in current
prototype silicon, but failed to apply it to all eight PCI functions
within the device.

Option::ROM was assuming that ROM images using a short jump
instruction for the init entry point would have a zero byte at offset
5; this is not necessarily true.

INT 1A,B101 (get PCI BIOS version) will overwrite %edi.

Include PMM allocation result in POST banner.

Include full product string in "starting execution" message.

Also mark ourselves as supporting DDIM in PnP header, for
completeness.

Commit 12f203c introduced a bug that caused the UNDI loader to attempt
to load the UNDI code and data segments to incorrect addresses.

On a system that doesn't support BBS, we end up hooking INT19 to gain
control of the boot process.  If the system is PCI3.0, we must take
care to use the runtime value for %cs, rather than the POST-time
value, otherwise we end up pointing INT19 to the temporary option ROM
POST scratch area.

pxenv_udp_write() needs to specify a net device, otherwise ipv4 is
unable to route broadcast transmissions.

Determine the network-layer packet type and fill it in for UNDI
clients.  This is required by some NBPs such as emBoot's winBoot/i.

This change requires refactoring the link-layer portions of the
gPXE netdevice API, so that it becomes possible to strip the
link-layer header without passing the packet up the network stack.

Some dumb NBPs (e.g. emBoot's winBoot/i) never call PXENV_UNDI_ISR
with FuncFlag=PXENV_UNDI_ISR_START; they just sit in a tight polling
loop merrily violating the PXE spec with repeated calls to
PXENV_UNDI_ISR_IN_PROCESS.  Force a extra calls to netdev_poll() to
cope with these out-of-spec clients.

Allow for an arbitrary number of splits of the system memory map via
INT 15,e820.

Features of the new map-mangling algorithm include:

  Supports random access to e820 map entries.

  Requires only sequential access support from the underlying e820
  map, even if our caller uses random access.

  Empty regions will always be stripped.

  Always terminates with %ebx=0, even if the underlying map terminates
  with CF=1.

  Allows for an arbitrary number of hidden regions, with underlying
  regions split into as many subregions as necessary.

Total size increase to achieve this is 193 bytes.

Define a list of N allowed memory regions, and split each underlying
e820 region into up to N subregions.  Strip resulting empty regions
out of the map, avoiding using the "return with CF set to strip last
empty region" trick, because it seems that bootmgr.exe in Win2k8 gets
upset if the memory map is terminated with CF set.

This is an intermediate checkin that defines a single allowed memory
region covering the entire 64-bit address space, and uses the existing
map-mangling code on top of the new region-splitting code.  This
sanitises the memory map to the point that Win2k8 is able to boot even
on a system that defines a final zero-length region at the 4GB mark.

I'm checking this in because it may be useful for future debugging
efforts to be able to run with the existing and known-working map
mangling code together with the map sanitisation capabilities of the
new map mangling code.

Add support for manipulating the jump instruction that forms the
option ROM initialisation entry point, so that mergerom.pl can treat
it just like other entry points.

Add support for merging the initialisation entry point (and IBM BOFM
table) to mergerom.pl; this is another slightly icky but unfortunately
necessary GPL vs. NDA workaround.  When mergerom.pl replaces an entry
point in the original ROM, it now fills in the corresponding entry
point in the merged ROM with the original value; this allows (for
example) a merged initialisation entry point to do some processing and
then jump back to the original entry point.

fetch_string_setting() was subtracting one from the length of the
to-be-NUL-terminated buffer in order to obtain the length of the
unterminated buffer to be passed to fetch_setting().  This works
extremely well unless the length of the to-be-NUL-terminated buffer is
zero, at which point we end up giving fetch_setting() a buffer of
length -1UL, thereby inviting it to overwrite as much memory as it
wants...

The ProxyDHCPREQUEST is a unicast packet, so the first request will
almost always be lost due to not having the IP address in the ARP
cache.  If the minimum retry time is set to one second (as per commit
ff2b6a5), then ProxyDHCP will time out and give up before managing to
successfully transmit a request.

The DHCP timers need to be reworked anyway, so this mild hack is
acceptable for now.

New min_timeout and max_timeout fields in struct retry_timer allow
users of this timer to set their own desired minimum and maximum
timeouts, without being constrained to a single global minimum and
maximum. Users of the timer can still elect to use the default global
values by leaving the min_timeout and max_timeout fields as 0.

Allow initiator to verify target authentication using CHAP.

Add the missing instructions to the code path that I never tested due
to not having a PCI 3.0 system available.

(D'oh)

WinPE seems to have a bug that causes it to always use the TFTP server
IP address and filename from the ProxyDHCPACK packet, even if the
ProxyDHCPACK packet doesn't exist.  This causes it to end up
attempting to fetch a file such as

  tftp://0.0.0.0/bootmgr.exe

If we don't have a ProxyDHCPACK to use, we pretend that it was a copy
of the DHCPACK packet.  This works around the problem, and hopefully
won't surprise any NBPs.

Altiris erroneously cares about the ordering of DHCP options, and will
get confused if we don't construct them in the order it expects.

This is observed (so far) only when attempting to deploy 64-bit Win2k3.

This patch adds support for the virtio-net adapter provided by KVM.

Written by Laurent Vivier <Laurent.Vivier@bull.net> for Etherboot.
Wrapped as legacy driver for gPXE by Stefan Hajnoczi
<stefanha@gmail.com>.

When we boot from a DHCP-supplied filename, we previously relied on
the fact that the current working URI is set to tftp://[next-server]/
in order to resolve the filename into a full tftp:// URI.  However,
this process will eliminate the distinction between filenames with and
without initial slashes:

 cwuri="tftp://10.0.0.1/" filename="vmlinuz"  => URI="tftp://10.0.0.1/vmlinuz"
 cwuri="tftp://10.0.0.1/" filename="/vmlinuz" => URI="tftp://10.0.0.1/vmlinuz"

This distinction is important for some TFTP servers.  We now
explicitly construct a string of the form

 "tftp://[next-server]/filename"

so that a filename with an initial slash will result in a URI
containing a double-slash, e.g.

 "tftp://10.0.0.1//vmlinuz"

The TFTP code always strips a single initial slash, and so ends up
presenting the correct path to the server.

URIs entered explicitly by users at the command line must include a
double slash if they want an initial slash presented to the TFTP
server:

  "kernel tftp://10.0.0.1/vmlinuz"  => filename="vmlinuz"
  "kernel tftp://10.0.0.1//vmlinuz" => filename="/vmlinuz"

This utility is required as a workaround for legal restrictions on
including GPL and non-GPL code within the same expansion ROM image.

While this is not encouraged, we are prepared to accept that
concatenation of ROM images and updating of the ROM header data
structures can be classed as "mere aggregation" within the terms of
the GPL.

If in any doubt, assume that you cannot include GPL and non-GPL code
within the same expansion ROM image.  Contact the Etherboot team for
clarification on your specific circumstances.

The Option::ROM module provides an easy way to read and edit fields
within option ROM headers.

When an error reply (not 1xx, 2xx or 3xx) was received, ftp_reply()
invoked ftp_done() to close connections, but did not return, and the
rest of code in this function could try to send commands to the closed
control connection.

Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>

Based on a patch contributed by Sergey Vlasov <vsu@altlinux.ru> :

  In my testing with "qemu -net user" the 226 response to RETR was
  often received earlier than final packets of the data connection;
  this caused the received file to become truncated without any error
  indication.  Fix this by adding an intermediate state FTP_TRANSFER
  between FTP_RETR and FTP_QUIT, so that the transfer is considered to
  be complete only when both the end of data connection is encountered
  and the final reply to the RETR command is received.

H. Peter Anvin <hpa@zytor.com> sent word that Sergey Vlasov
<vsu@altlinux.ru> discovered gPXE lkrn images fail to load in SYSLINUX
3.70 because we have initrd_addr_max zeroed.  This patch sets the same
value as the Linux kernel.

Also change the header jmp instruction to use a hardcoded opcode value
like Linux does.  Just in case the assembler decides to use a three-byte
instruction instead of the desired two-byte jmp.

Allow settings to be expanded in arbitrary commands, such as

  kernel http://10.0.0.1/boot.php?uuid=${uuid}

Also add the "echo" command, as being the easiest way to test this
features.

Print one dot per second while waiting in monojob.c (e.g. for DHCP,
for file downloads, etc.), to inform user that the system has not
locked up.

Patch contributed by Andrew Schran <aschran@google.com>, minor
modification by me.

This change allows the time for which shell banners are displayed to
be configured in the config.h file.  The ability to access the shell
can also be effectively disabled by setting this timeout to zero.

In tg3_chip_reset(), the PCI_EXPRESS change is taken from the Linux
tg3 driver. I am not sure what exactly it does (it is not documented
in the Linux driver), but it is necessary for the NIC to work
correctly.

Use "-include" rather than "include" for the generated Makefile
fragments, in order to suppress the long list of warnings that
otherwise appears at the start of a clean build.

Contributed by Edward Waugh <ewaugh@netxen.com>

Add yet another ugly hack to iscsiboot.c, this time to allow the user to
inhibit the shutdown/removal of the iSCSI INT13 device (and the network
devices, since they are required for the iSCSI device to function).

On the plus side, the fact that shutdown() now takes flags to
differentiate between shutdown-for-exit and shutdown-for-boot means that
another ugly hack (to allow returning via the PXE stack on BIOSes that
have broken INT 18 calls) will be easier.

I feel dirty.

Conjecture: The hardware issues 64-bit DMA writes of status descriptors,
which some PCI bridges seem to split into two 32-bit writes in reverse
order (i.e. dword 1 first).  This means that we sometimes observe a
partial status descriptor.  Add an explicit check to ensure that the
descriptor is complete before processing it.

Also ensure that the RDS consumer counter is incremented only when we
know that we have actually consumed an RX descriptor.