[console] Allow usage to be defined independently for each console
Add the concept of a "console usage", such as "standard output" or
"debug messages". Allow usages to be associated with each console
independently. For example, to send debugging output via the serial
port, while preventing it from appearing on the local console:
#define CONSOLE_SERIAL CONSOLE_USAGE_ALL
#define CONSOLE_PCBIOS ( CONSOLE_USAGE_ALL & ~CONSOLE_USAGE_DEBUG )
If no usages are explicitly specified, then a default set of usages
will be applied. For example:
#define CONSOLE_SERIAL
will have the same affect as
#define CONSOLE_SERIAL CONSOLE_USAGE_ALL
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[bios] Set character attributes only when necessary
There is no INT 10 call for "display character with attribute,
advancing the cursor and scrolling the screen as necessary". We
therefore make two INT 10 calls: INT 10,09 to write the character with
its attribute at the current cursor position, and then INT 10,0e to
(re)write the character (leaving the attribute unchanged), advance the
cursor position and scroll as necessary.
This confuses the serial-over-LAN console redirection feature provided
by some BIOSes.
Fix by performing the INT10,09 only when necessary to change the
existing attribute.
Reported-by: Itay Gazit <itaygazit@gmail.com>
Tested-by: Itay Gazit <itaygazit@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[bios] Use INT 16,11 instead of INT 16,01 to check for keystrokes
INT 16,01 will discard some extended keystrokes on some BIOSes, making
it impossible for iPXE to detect keypresses such as F12. Fix by using
INT 16,11 instead.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The function keys F5-F12 all conform to the same ANSI pattern as the
other "special" keys that we currently recognise. Add these key
definitions, and shrink the representation of the ANSI sequences in
bios_console.c to compensate.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[pcbios] Merge adjacent memory regions of same type
Some BIOSes can report multiple memory regions which may be adjacent
and the same type. Since only the first region is used in the
mboot.c32 layer it's possible to run out of memory when loading all of
the boot modules. One may get around this problem by having iPXE
merge these memory regions internally.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
pcbios specific get_memmap() is used by the b44 driver making
all-drivers builds fail on other platforms. Move it to the I/O API
group and provide a dummy implementation on EFI.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
COMBOOT API calls set the carry flag on failure. This was not being
propagated because the COMBOOT interrupt handler used iret to return
with EFLAGS restored from the stack. This patch propagates CF before
returning from the interrupt.
Reported-by: Geoff Lywood <glywood@vmware.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Marty Connor <mdc@etherboot.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[pcbios] Always show INT 15,88 result under DEBUG=memmap
Always call INT 15,88 even if we don't use the result. This allows
DEBUG=memmap to show the complete result set returned by all of the
INT 15 memory-map calls.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[librm] Use libflat to enable A20 line on each real-to-protected transition
Use the shared code in libflat to perform the A20 transitions
automatically on each transition from real to protected mode. This
allows us to remove all explicit calls to gateA20_set().
The old warnings about avoiding automatically enabling A20 are
essentially redundant; they date back to the time when we would always
start hammering the keyboard controller without first checking to see
if gate A20 was already enabled (which it almost always is).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Access to the gpxe.org and etherboot.org domains and associated
resources has been revoked by the registrant of the domain. Work
around this problem by renaming project from gPXE to iPXE, and
updating URLs to match.
Also update README, LOG and COPYRIGHTS to remove obsolete information.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[e820mangler] Add missing CLC ins. for success path
The get_underlying_e820 function should return with CF unset on success.
Reported-by: Timothy Stack <tstack@vmware.com>
Signed-off-by: Marty Connor <mdc@etherboot.org>
[pcbios] Don't use "lret $2" to return from an interrupt
Using "lret $2" to return from an interrupt causes interrupts to be
disabled in the calling program, since the INT instruction will have
disabled interrupts. Instead, patch CF on the stack and use iret to
return.
Interestingly, the original PC BIOS had this bug in at least one
place.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Michael Brown <mcb30@etherboot.org>
[pcbios] Add additional sanity check for bogus e820 map
At POST time some BIOSes return invalid e820 maps even though
they indicate that the data is valid. We add a check that the first
region returned by e820 is RAM type and declare the map to be invalid
if it is not.
This extends the sanity checks from 8b20e5d ("[pcbios] Sanity-check
the INT15,e820 and INT15,e801 memory maps").
[efi] Use EFI-native mechanism for accessing SMBIOS table
EFI provides a copy of the SMBIOS table accessible via the EFI system
table, which we should use instead of manually scanning through the
F000:0000 segment.
[i386] Change [u]int32_t to [unsigned] int, rather than [unsigned] long
This brings us in to line with Linux definitions, and also simplifies
adding x86_64 support since both platforms have 2-byte shorts, 4-byte
ints and 8-byte long longs.
[settings] Add the notion of a "tag magic" to numbered settings
Settings can be constructed using a dotted-decimal notation, to allow
for access to unnamed settings. The default interpretation is as a
DHCP option number (with encapsulated options represented as
"<encapsulating option>.<encapsulated option>".
In several contexts (e.g. SMBIOS, Phantom CLP), it is useful to
interpret the dotted-decimal notation as referring to non-DHCP
options. In this case, it becomes necessary for these contexts to
ignore standard DHCP options, otherwise we end up trying to, for
example, retrieve the boot filename from SMBIOS.
Allow settings blocks to specify a "tag magic". When dotted-decimal
notation is used to construct a setting, the tag magic value of the
originating settings block will be ORed in to the tag number.
Store/fetch methods can then check for the magic number before
interpreting arbitrarily-numbered settings.
[pcbios] Guard against register corruption in INT 15,e820 implementations
Someone at Dell must have a full-time job designing ways to screw up
implementations of INT 15,e820. This latest gem is courtesy of a Dell
Xanadu system, which arbitrarily decides to obliterate the contents of
%esi.
Preserve %esi, %edi and %ebp across calls to INT 15,e820, in case
someone tries a variation on this trick in future.
The userptr_t is now the fundamental type that gets used for conversions.
For example, virt_to_phys() is implemented in terms of virt_to_user() and
user_to_phys().
[i386] Simplify linker script and standardise linker-defined symbol names
Reduce the number of sections within the linker script to match the
number of practical sections within the output file.
Define _section, _msection, _esection, _section_filesz, _section_memsz,
and _section_lma for each section, replacing the mixture of symbols that
previously existed.
In particular, replace _text and _end with _textdata and _etextdata, to
make it explicit within code that uses these symbols that the .text and
.data sections are always treated as a single contiguous block.
[pcbios] Allow for larger-than-20-byte buffers in e820mangler.S
Although the E820 API allows for a caller to provide only a 20-byte
buffer, there exists at least one combination (HP BIOS, 32-bit WinPE)
that relies on information found only in the "extended attributes"
field, which requires a 24-byte buffer.
Allow for up to a 64-byte E820 buffer, in the hope of coping with
future idiocies like this one.
[pcbios] Print INT 15,E820 extended attributes, if present
The ACPI specification defines an additional 4-byte field at offset 20
for an E820 memory map entry. This field is presumably optional,
since generally E820 gets given only a 20-byte buffer to fill.
However, the bits of this optional field are defined as:
bit 0 : region is enabled
bit 1 : region is non-volatile memory rather than RAM
so it seems as though callers that pass in only a 20-byte buffer may
be missing out on some rather important information.
Our INT 15,e820 code was setting %es=%ss (as part of the "look ahead
in the memory map" logic), but failing to restore %es afterwards.
This is a serious bug, but wasn't affecting many platforms because
almost all callers seem to set %es=%ss anyway.
[pcbios] Fetch INT 15,e820 entry directly into our e820 cache
Some BIOSes require us to pass in not only the continuation value (in
%ebx) as returned by the previous call to INT 15,e820 but also the
unmodified buffer (at %es:%di) as returned by the previous call to INT
15,e820. Apparently, someone thought it would be a worthwhile
optimisation to fill in only the low dword of the "length" field and
the low byte of the "type field", assuming that the buffer would
remain unaltered from the previous call.
This problem was being triggered by the "peek ahead" logic in
get_mangled_e820(), which would read the next entry into a temporary
buffer in order to be able to guarantee terminating the map with
%ebx=0 rather than CF=1. (Terminating with CF=1 upsets some Windows
flavours, despite being documented legal behaviour.)
Work around this problem by always fetching directly into our e820
cache; that way we can guarantee that the underlying call always sees
the previous buffer contents (and the same buffer address).
[pcbios] Add facility for testing arbitrary E820 memory maps
We seem to be having issues with various E820 memory maps. These
problems are often difficult to reproduce, requiring access to the
specific system exhibiting the problem.
Add a facility for hooking in a fake E820 map generator, using an
arbitrary map defined in a C array, solely in order to be able to test
the map-mangling code against arbitrary E820 maps.
[pcbios] Inhibit INT 15 memory map hiding on brain-dead BIOSes
Some really moronic BIOSes bring up the PXE stack via the UNDI loader
entry point during POST, and then don't bother to unload it before
overwriting the code and data segments. If this happens, we really
don't want to leave INT 15 hooked, because that will cause any loaded
OS to die horribly as soon as it attempts to fetch the system memory
map.
We use a heuristic to detect whether or not we are being loaded at the
top of free base memory. If we determine that we are being loaded at
some other arbitrary location in base memory, then we assume that it's
not safe to hook INT 15.
INT 15,e801 is capable of returning a memory range that extends to
4GB, so allow for this in the debug message that shows the data
returned by INT 15,e801.
[pcbios] Support arbitrary splits of the e820 memory map
Allow for an arbitrary number of splits of the system memory map via
INT 15,e820.
Features of the new map-mangling algorithm include:
Supports random access to e820 map entries.
Requires only sequential access support from the underlying e820
map, even if our caller uses random access.
Empty regions will always be stripped.
Always terminates with %ebx=0, even if the underlying map terminates
with CF=1.
Allows for an arbitrary number of hidden regions, with underlying
regions split into as many subregions as necessary.
Total size increase to achieve this is 193 bytes.
[pcbios] Prepare for multiple splits of hidden e820 memory regions
Define a list of N allowed memory regions, and split each underlying
e820 region into up to N subregions. Strip resulting empty regions
out of the map, avoiding using the "return with CF set to strip last
empty region" trick, because it seems that bootmgr.exe in Win2k8 gets
upset if the memory map is terminated with CF set.
This is an intermediate checkin that defines a single allowed memory
region covering the entire 64-bit address space, and uses the existing
map-mangling code on top of the new region-splitting code. This
sanitises the memory map to the point that Win2k8 is able to boot even
on a system that defines a final zero-length region at the 4GB mark.
I'm checking this in because it may be useful for future debugging
efforts to be able to run with the existing and known-working map
mangling code together with the map sanitisation capabilities of the
new map mangling code.
[iSCSI] Support Windows Server 2008 direct iSCSI installation
Add yet another ugly hack to iscsiboot.c, this time to allow the user to
inhibit the shutdown/removal of the iSCSI INT13 device (and the network
devices, since they are required for the iSCSI device to function).
On the plus side, the fact that shutdown() now takes flags to
differentiate between shutdown-for-exit and shutdown-for-boot means that
another ugly hack (to allow returning via the PXE stack on BIOSes that
have broken INT 18 calls) will be easier.
I feel dirty.
[i386] Change semantics of __from_data16 and __from_text16
__from_data16 and __from_text16 now take a pointer to a
.data16/.text16 variable, and return the real-mode offset within the
appropriate segment. This matches the use case for every occurrence
of these macros, and prevents potential future bugs such as that fixed
in commit d51d80f. (The bug arose essentially because "&pointer" is
still syntactically valid.)
[a20] Send a null command to the KBC after changing A20
Send a null command, specifically "pulse outputs" with no outputs
selected, to the KBC after changing A20. This was apparently done by DOS,
presumably as a synchronization hack, and the authors of the UHCI spec
thought it was inherent. Therefore, there are systems out there (e.g. HP
DL360 G5) which will stop responsing to "legacy USB" unless they see the
null command, 0xFF, written to port 0x64 at the end of the A20 toggling
sequence.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
A bug in read_smbios_string() was causing the starting offset of the
SMBIOS structure to be added twice, resulting in completely the wrong
strings being returned.
Bug identified by Martin Herweg <m.herweg@gmx.de>
Timer subsystem initialization code in core/timer.c
Split the BIOS and RTDSC timer drivers from i386_timer.c
Split arch/i386/firmware/pcbios/bios.c into the RTSDC
timer driver and arch/i386/core/nap.c
Split the headers properly:
include/unistd.h - delay functions to be used by the
gPXE core and drivers.
include/gpxe/timer.h - the fimer subsystem interface
to be used by the timer drivers
and currticks() to be used by
the code gPXE subsystems.
include/latch.h - removed
include/timer.h - scheduled for removal. Some driver
are using currticks, which is
only for core subsystems.
Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Ensure that empty e820 regions are skipped even at the end of the
memory map. (We achieve this by setting CF on the last entry if it is
zero-length; this avoids the need to look ahead to see at each entry
if the *next* entry would be both the last entry and zero-length).
This fixes the "0kB base memory" error message upon starting Windows
2003 on a SunFire X2100.
Michael Brown