[settings] Eliminate call to fetchf_named_setting() in expand_settings()
Use parse_setting_name() and fetchf_setting_copy() in
expand_settings(), to eliminate the call to fetchf_named_setting().
This change also eliminates the potentially large stack-allocated
buffer in expand_settings().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Change "not-found" semantics of fetch_setting_copy()
fetch_settings_copy() currently returns success and a NULL data
pointer to indicate a non-existent setting. This is intended to allow
the caller to differentiate between a non-existent setting and an
error in allocating memory for the copy of the setting.
The underlying settings blocks' fetch() methods provide no way to
perform an existence check separate from an attempt to fetch the
setting. A "non-existent setting" therefore means simply a setting
for which an error was encountered when attempting to fetch from every
settings block within the subtree.
Since any underlying error within a settings block (e.g. a GuestRPC
failure when attempting to retrieve a VMware GuestInfo setting) will
produce the effect of a "non-existent setting", it seems somewhat
meaningless to give special treatment to memory allocation errors
within fetch_setting_copy().
Remove the special treatment and simplify the semantics of
fetch_setting_copy() by directly passing through any underlying error
(including non-existence) encountered while fetching the setting.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Clarify usage of the term "named setting"
There are currently two conflicting usages of the term "named setting"
within iPXE: one refers to predefined settings (such as show up in the
"config" UI), the other refers to settings identified by a name (such
as "net0.dhcp/ip").
Split these usages into the term "predefined setting" and "named
setting" to avoid ambiguity.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[base16] Ensure base16_encode() always terminates its result string
base16_encode() will fail to generate a terminating NUL if the length
of the raw data is zero, since the loop calling sprintf() will never
execute.
Fix by explicitly terminating the result with a NUL.
Reported-by: Marin Hannache <git@mareo.fr>
Debugged-by: Marin Hannache <git@mareo.fr>
Tested-by: Marin Hannache <git@mareo.fr>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Make "netX" settings block function as a symbolic link
Add a facility for settings blocks to act as symbolic links to other
settings blocks, and reimplement the "netX" virtual settings block
using this facility.
The primary advantage of this approach is that unscoped settings such
as ${mac} and ${filename} will now reflect the settings obtained from
the most recently opened network device: in most cases, this will mean
the settings obtained from the most recent DHCP attempt. This should
improve conformance to the principle of least astonishment.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow network device's "busloc" setting to be formatted as a PCI
bus:dev.fn address using e.g. ${net0/busloc:busdevfn}.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use hex_decode() to parse "hex" and "hexhyp" settings. Note that this
parser is stricter than the old parser; it now requires exactly two
hex digits for each byte. (The old parser was based upon strtoul()
and so would allow leading whitespace and a leading plus or minus
sign.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[base16] Generalise base16_decode() to hex_decode()
Provide a generic hex_decode() routine which can be shared between the
Base16 code and the "hex" and "hexhyp" settings parsers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Create an explicit concept of "settings scope" and eliminate the magic
values used for numerical setting tags.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Expose build architecture and platform via settings
Expose the build architecture (e.g. "i386" or "x86_64") via
${buildarch} and the firmware platform (e.g. "pcbios" or "efi") via
${platform}. These settings directly expose the ARCH and PLATFORM
variables from the Makefile.
Note that the build architecture reflects the architecture for which
iPXE was compiled, not the architecture on which iPXE is currently
running. The "cpuid" command can be used to detect a 64-bit system at
runtime.
Requested-by: James A. Peltier <jpeltier@sfu.ca>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Abstract out the ability to reboot the system to a separate reboot()
function (with platform-specific implementations), add an EFI
implementation, and make the existing "reboot" command available under
EFI.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tls] Concatenate received non-data records before processing
Allow non-data records to be split across multiple received I/O
buffers, to accommodate large certificate chains.
Reported-by: Nicola Volpini <Nicola.Volpini@kambi.com>
Tested-by: Nicola Volpini <Nicola.Volpini@kambi.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[autoboot] Avoid excess backspacing after displaying Ctrl-B prompt
Remove the newline from the "Press Ctrl-B..." prompt string, so that
prompt() does not attempt to backspace beyond the start of the line.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[serial] Don't enable serial console without serial support
serial_console_init() would enable serial console support without
knowing if the serial driver succeeded or not. As a result, the
serial console would interfere with a normal keyboard on a system
lacking serial support.
Reported-by: Jan ONDREJ (SAL) <ondrejj(at)salstar.sk>
Signed-off-by: Shao Miller <sha0.miller@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Use a generic setting's own type as its default type
When fetching a named setting using a name that does not explicitly
specify a type, default to using the type stored when the setting was
created, rather than always defaulting to "string". This allows the
behaviour of user-defined settings to match the behaviour of
predefined settings (which have a sensible default type).
For example:
set server:ipv4 192.168.0.1
echo ${server}
will now print "192.168.0.1", rather than trying to print out the raw
IPv4 address bytes as a string.
The downside of this change is that existing tricks for printing
special characters within scripts may require (backwards-compatible)
modification. For example, the "clear screen" sequence:
set esc:hex 1b
set cls ${esc}[2J
echo ${cls}
will now have to become
set esc:hex 1b
set cls ${esc:string}[2J # Must now explicitly specify ":string"
echo ${cls}
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[malloc] Allow allocation of memory with a specified alignment offset
Allow for allocation of memory blocks having a specified offset from a
specified physical alignment, such as being 12 bytes before a 2kB
boundary.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Reduce CPU usage while waiting for user input. This is particularly
important for virtual machines, where CPU is a shared resource.
Reported-by: Alessandro Salvatori <alessandro@embrane.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Expose image tail-recursion to iPXE scripts via the "--replace"
option. This functions similarly to exec() under Unix: the
currently-executing script is replaced with the new image (as opposed
to running the new image as a subroutine).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Expose exit status of failed command via ${errno}
Allow scripts to report errors in more detail by exposing the most
recent error via the ${errno} setting. For example:
chain ${filename} || goto failed
...
:failed
imgfree http://192.168.0.1/ipxe_error.php?error=${errno}
Note that ${errno} is valid only immediately after executing a failed
command.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown