[acpi] Allow time for ACPI power off to take effect
The ACPI power off sequence may not take effect immediately. Delay
for one second, to eliminate potentially confusing log messages such
as "Could not power off: Error 0x43902001 (http://ipx".
Reported-by: Leonid Vasetsky <leonidv@velostrata.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
On some platforms (observed in a small subset of Microsoft Azure
(Hyper-V) virtual machines), the RTC appears to be incapable of
generating an interrupt via the legacy PIC. The RTC status registers
show that a periodic interrupt has been asserted, but the PIC IRR
shows that IRQ8 remains inactive.
On such systems, iPXE will currently freeze during the "iPXE
initialising devices..." message.
Work around this problem by checking that RTC interrupts are being
raised before returning from rtc_entropy_enable(). If no interrupt is
seen within 100ms, then we assume that the RTC interrupt mechanism is
broken. In these circumstances, iPXE will continue to initialise but
any subsequent attempt to generate entropy will fail. In particular,
HTTPS connections will fail with an error indicating that no entropy
is available.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[dhcp] Automatically generate vendor class identifier string
The vendor class identifier strings in DHCP_ARCH_VENDOR_CLASS_ID are
out of sync with the (correct) client architecture values in
DHCP_ARCH_CLIENT_ARCHITECTURE.
Fix by removing all definitions of DHCP_ARCH_VENDOR_CLASS_ID, and
instead generating the vendor class identifier string automatically
based on DHCP_ARCH_CLIENT_ARCHITECTURE and DHCP_ARCH_CLIENT_NDI.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[dhcp] Allow for variable encapsulation of architecture-specific options
DHCPv4 and DHCPv6 share some values in common for the architecture-
specific options (such as the client system architecture type), but
use different encapsulations: DHCPv4 has a single byte for the option
length while DHCPv6 has a 16-bit field for the option length.
Move the containing DHCP_OPTION() and related wrappers from the
individual dhcp_arch.h files to dhcp.c, thus allowing for the
architecture-specific values to be reused in dhcpv6.c.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[pxe] Disable interrupts on the PIC before starting NBP
Some BIOSes (observed with an HP Gen9) seem to spuriously enable
interrupts at the PIC. This causes problems with NBPs such as GRUB
which use the UNDI API (thereby enabling interrupts on the NIC)
without first hooking an interrupt service routine. In this
situation, the interrupt will end up being handled by the default BIOS
ISR, which will typically just send an EOI and return. Since nothing
in this handler causes the NIC to deassert the interrupt, this will
result in an interrupt storm.
Entertainingly, some BIOSes are immune to this problem because the
default ISR sends the EOI only to the slave PIC; this effectively
disables the interrupt.
Work around this problem by disabling the interrupt on the PIC before
invoking the PXE NBP. An NBP that expects to make use of interrupts
will need to be configuring the PIC anyway, so it is probably safe to
assume that it will explicitly reenable the interrupt.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[bios] Do not enable interrupts when printing to the console
There seems to be no reason for the sti/cli pair used around each call
to INT 10. Remove these instructions, so that printing debug messages
from within an ISR does not temporarily reenable interrupts.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[pci] Support systems with multiple PCI root bridges
Extend the 16-bit PCI bus:dev.fn address to a 32-bit seg:bus:dev.fn
address, assuming a segment value of zero in contexts where multiple
segments are unsupported by the underlying data structures (e.g. in
the iBFT or BOFM tables).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The raw cycle counter at PMCCNTR_EL0 works in qemu but seems to always
read as zero on physical hardware (tested on Juno r1 and Cavium
ThunderX), even after ensuring that PMCR_EL0.E and PMCNTENSET_EL0.C
are both enabled.
Use CNTVCT_EL0 instead; this seems to count at a lower resolution
(tens of CPU cycles), but is usable for profiling.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tcpip] Do not fall back to using unoptimised TCP/IP checksumming
Require architecture-specific code to make a deliberate choice to use
the unoptimised generic_tcpip_continue_chksum() function, if there is
no optimised version available.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[librm] Preserve FPU, MMX and SSE state across calls to virt_call()
The IBM Tivoli Provisioning Manager for OS Deployment (also known as
TPMfOSD, Rembo-ia32, or Rembo Auto-Deploy) has a serious bug in some
older versions (observed with v5.1.1.0, apparently fixed by v7.1.1.0)
which can lead to arbitrary data corruption.
As mentioned in commit 87723a0 ("[libflat] Test A20 gate without
switching to flat real mode"), Tivoli's NBP sets up a VMM and makes
calls to the PXE stack in VM86 mode. This appears to be some kind of
attempt to run PXE API calls inside a sandbox. The VMM is fairly
sophisticated: for example, it handles our attempts to switch into
protected mode and patches our GDT so that our protected-mode code
runs in ring 1 instead of ring 0. However, it neglects to apply any
memory protections. In particular, it does not enable paging and
leaves us with 4GB segment limits. We can therefore trivially break
out of the sandbox by simply overwriting the GDT (or by modifying any
of Tivoli's VMM code or data structures).
When we attempt to execute privileged instructions (such as "lidt"),
the CPU raises an exception and control is passed to the Tivoli VMM.
This may result in a call to Tivoli's memcpy() function.
Tivoli's memcpy() function includes optimisations which use the SSE
registers %xmm0-%xmm3 to speed up aligned memory copies.
Unfortunately, the Tivoli VMM's exception handler does not save or
restore %xmm0-%xmm3. The net effect of this bug in the Tivoli VMM is
that any privileged instruction (such as "lidt") issued by iPXE may
result in unexpected corruption of the %xmm0-%xmm3 registers.
Even more unfortunately, this problem affects the code path taken in
response to a hardware interrupt from the NIC, since that code path
will call PXENV_UNDI_ISR. The net effect therefore becomes that any
NIC hardware interrupt (e.g. due to a received packet) may result in
unexpected corruption of the %xmm0-%xmm3 registers.
If a packet arrives while Tivoli is in the middle of using its
memcpy() function, then the unexpected corruption of the %xmm0-%xmm3
registers will result in unexpected corruption in the destination
buffer. The net effect therefore becomes that any received packet may
result in a 16-byte block of corruption somewhere in any data that
Tivoli copied using its memcpy() function.
We can work around this bug in the Tivoli VMM by saving and restoring
the %xmm0-%xmm3 registers across calls to virt_call(). To work around
the problem, we need to save registers before attempting to execute
any privileged instructions, and ensure that we attempt no further
privileged instructions after restoring the registers.
This is less simple than it may sound. We can use the "movups"
instruction to save and restore individual registers, but this will
itself generate an undefined opcode exception if SSE is not currently
enabled according to the flags in %cr0 and %cr4. We can't access %cr0
or %cr4 before attempting the "movups" instruction, because access a
control register is itself a privileged instruction (which may
therefore trigger corruption of the registers that we're trying to
save).
The best solution seems to be to use the "fxsave" and "fxrstor"
instructions. If SSE is not enabled, then these instructions may fail
to save and restore the SSE register contents, but will not generate
an undefined opcode exception. (If SSE is not enabled, then we don't
really care about preserving the SSE register contents anyway.)
The use of "fxsave" and "fxrstor" introduces an implicit assumption
that the CPU supports SSE instructions (even though we make no
assumption about whether or not SSE is currently enabled). SSE was
introduced in 1999 with the Pentium III (and added by AMD in 2001),
and is an architectural requirement for x86_64. Experimentation with
current versions of gcc suggest that it may generate SSE instructions
even when using "-m32", unless an explicit "-march=i386" or "-mno-sse"
is used to inhibit this. It therefore seems reasonable to assume that
SSE will be supported on any hardware that might realistically be used
with new iPXE builds.
As a side benefit of this change, the MMX register %mm0 will now be
preserved across virt_call() even in an i386 build of iPXE using a
driver that requires readq()/writeq(), and the SSE registers
%xmm0-%xmm5 will now be preserved across virt_call() even in an x86_64
build of iPXE using the Hyper-V netvsc driver.
Experimentation suggests that this change adds around 10% to the
number of cycles required for a do-nothing virt_call(), most of which
are due to the extra bytes copied using "rep movsb". Since the number
of bytes copied is a compile-time constant local to librm.S, we could
potentially reduce this impact by ensuring that we always copy a whole
number of dwords and so can use "rep movsl" instead of "rep movsb".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[librm] Reduce real-mode stack consumption in virt_call()
Some PXE NBPs are known to make PXE API calls with very little space
available on the real-mode stack. For example, the Rembo-ia32 NBP
from some versions of IBM's Tivoli Provisioning Manager for Operating
System Deployment (TPMfOSD) will issue calls with the real-mode stack
placed at 0000:03d2; this is at the end of the interrupt vector table
and leaves only 498 bytes of stack space available before overwriting
the hardware IRQ vectors. This limits the amount of state that we can
preserve before transitioning to protected mode.
Work around these challenging conditions by preserving everything
other than the initial register dump in a temporary static buffer
within our real-mode data segment, and copying the contents of this
buffer to the protected-mode stack.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[pxe] Implicitly open network device in PXENV_UDP_OPEN
Some end-user configurations have been observed in which the first NBP
(such as GRUB2) uses the UNDI API and then transfers control to a
second NBP (such as pxelinux) which uses the UDP API. The first NBP
closes the network device using PXENV_UNDI_CLOSE, which renders the
UDP API unable to transmit or receive packets.
The correct behaviour under these circumstances is (as often) simply
not documented by the PXE specification. Testing with the Intel PXE
stack suggests that PXENV_UDP_OPEN will implicitly reopen the network
device if necessary, so match this behaviour.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[int13] Allow default drive to be specified via "san-drive" setting
The DHCP option 175.189 has been defined (by us) since 2006 as
containing the drive number to be used for a SAN boot, but has never
been automatically used as such by iPXE.
Use this option (if specified) to override the default SAN drive
number.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[int13] Allow drive to be hooked using the natural drive number
Interpret the maximum drive number (0xff for hard disks, 0x7f for
floppy disks) as meaning "use natural drive number".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Do not use "objcopy -O binary" for objects with relocation records
The mbr.bin and usbdisk.bin standalone blobs are currently generated
using "objcopy -O binary", which does not process relocation records.
For the i386 build, this does not matter since the section start
address is zero and so the ".rel" relocation records are effectively
no-ops anyway.
For the x86_64 build, the ".rela" relocation records are not no-ops,
since the addend is included as part of the relocation record (rather
than inline). Using "objcopy -O binary" will silently discard the
relocation records, with the result that all symbols are effectively
given a value of zero.
Fix by using "ld --oformat binary" instead of "objcopy -O binary" to
generate mbr.bin and usbdisk.bin.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Allow assembler section type character to vary by architecture
On some architectures (such as ARM) the "@" character is used as a
comment delimiter. A section type argument such as "@progbits"
therefore becomes "%progbits".
This is further complicated by the fact that the "%" character has
special meaning for inline assembly when input or output operands are
used, in which cases "@progbits" becomes "%%progbits".
Allow the section type character(s) to be defined via Makefile
variables.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[librm] Do not unconditionally preserve flags across virt_call()
Commit 196f0f2 ("[librm] Convert prot_call() to a real-mode near
call") introduced a regression in which any deliberate modification to
the low 16 bits of the CPU flags (in struct i386_all_regs) would be
overwritten with the original flags value at the time of entry to
prot_call().
The regression arose because the alignment requirements of the
protected-mode stack necessitated the insertion of two bytes of
padding immediately below the prot_call() return address. The
solution chosen was to extend the existing "pushfl / popfl" pair to
"pushfw;pushfl / popfl;popfw". The extra "pushfw / popfw" appears at
first glance to be a no-op, but fails to take into account the fact
that the flags restored by popfl may have been deliberately modified
by the protected-mode function.
Fix by replacing "pushfw / popfw" with "pushw %ss / popw %ss". While
%ss does appear within struct i386_all_regs, any modification to the
stored value has always been ignored by prot_call() anyway.
The most visible symptom of this regression was that SAN booting would
fail since every INT 13 call would be chained to the original INT 13
vector.
Reported-by: Vishvananda Ishaya <vishvananda@gmail.com>
Reported-by: Jamie Thompson <forum.ipxe@jamie-thompson.co.uk>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[pcbios] Restrict external memory allocations to the low 4GB
When running the 64-bit BIOS version of iPXE, restrict external memory
allocations to the low 4GB to ensure that allocations (such as for
initrds) fall within our identity-mapped memory region, and will be
accessible to the potentially 32-bit operating system.
Move largest_memblock() back to memtop_umalloc.c, since this change
imposes a restriction that applies only to BIOS builds.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[librm] Add support for running in 64-bit long mode
Add support for running the BIOS version of iPXE in 64-bit long mode.
A 64-bit BIOS version of iPXE can be built using e.g.
make bin-x86_64-pcbios/ipxe.usb
make bin-x86_64-pcbios/8086100e.mrom
The 64-bit BIOS version should appear to function identically to the
normal 32-bit BIOS version. The physical memory layout is unaltered:
iPXE is still relocated to the top of the available 32-bit address
space. The code is linked to a virtual address of 0xffffffffeb000000
(in the negative 2GB as required by -mcmodel=kernel), with 4kB pages
created to cover the whole of .textdata. 2MB pages are created to
cover the whole of the 32-bit address space.
The 32-bit portions of the code run with VIRTUAL_CS and VIRTUAL_DS
configured such that truncating a 64-bit virtual address gives a
32-bit virtual address pointing to the same physical location.
The stack pointer remains as a physical address when running in long
mode (although the .stack section is accessible via the negative 2GB
virtual address); this is done in order to simplify the handling of
interrupts occurring while executing a portion of 32-bit code with
flat physical addressing via PHYS_CODE().
Interrupts may be enabled in either 64-bit long mode, 32-bit protected
mode with virtual addresses, 32-bit protected mode with physical
addresses, or 16-bit real mode. Interrupts occurring in any mode
other than real mode will be reflected down to real mode and handled
by whichever ISR is hooked into the BIOS interrupt vector table.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
In a 64-bit build, the entirety of the 32-bit address space is
identity-mapped and so any valid physical address may immediately be
used as a virtual address. Conversely, a virtual address that is
already within the 32-bit address space may immediately be used as a
physical address.
A valid virtual address that lies outside the 32-bit address space
must be an address within .textdata, and so can be converted to a
physical address by adding virt_offset.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[librm] Mark virt_offset, text16, data16, rm_cs, and rm_ds as constant
The physical locations of .textdata, .text16 and .data16 are constant
from the point of view of C code. Mark the relevant variables as
constant to allow gcc to optimise out redundant reads.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
No callers of prot_to_phys, phys_to_prot, or intr_to_prot require the
flags to be preserved. Remove the unnecessary pushfl/popfl pairs.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[librm] Add phys_call() wrapper for calling code with physical addressing
Add a phys_call() wrapper function (analogous to the existing
real_call() wrapper function) for calling code with flat physical
addressing, and use this wrapper within the PHYS_CODE() macro.
Move the relevant functionality inside librm.S, where it more
naturally belongs.
The COMBOOT code currently uses explicit calls to _virt_to_phys and
_phys_to_virt. These will need to be rewritten if our COMBOOT support
is ever generalised to be able to run in a 64-bit build.
Specifically:
- com32_exec_loop() should be restructured to use PHYS_CODE()
- com32_wrapper.S should be restructured to use an equivalent of
prot_call(), passing parameters via a struct i386_all_regs
- there appears to be no need for com32_wrapper.S to switch between
external and internal stacks; this could be omitted to simplify
the design.
For now, librm.S continues to expose _virt_to_phys and _phys_to_virt
for use by com32.c and com32_wrapper.S. Similarly, librm.S continues
to expose _intr_to_virt for use by gdbidt.S.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Fix building on older versions of binutils
Some older versions of binutils have issues with both the use of
PROVIDE() and the interpretation of numeric literals within a section
description.
Work around these older versions by defining the required numeric
literals outside of any section description, and by automatically
determining whether or not to generate extra space for page tables
rather than relying on LDFLAGS.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The bulk of the iPXE binary (the .textdata section) is physically
relocated at runtime to the top of the 32-bit address space in order
to allow space for an OS to be loaded. The relocation is achieved
with the assistance of segmentation: we adjust the code and data
segment bases so that the link-time addresses remain valid.
Segmentation is not available (for normal code and data segments) in
long mode. We choose to compile the C code with -mcmodel=kernel and
use a link-time address of 0xffffffffeb000000. This choice allows us
to identity-map the entirety of the 32-bit address space, and to alias
our chosen link-time address to the physical location of our .textdata
section. (This requires the .textdata section to always be aligned to
a page boundary.)
We simultaneously choose to set the 32-bit virtual address segment
bases such that the link-time addresses may simply be truncated to 32
bits in order to generate a valid 32-bit virtual address. This allows
symbols in .textdata to be trivially accessed by both 32-bit and
64-bit code.
There is no (sensible) way in 32-bit assembly code to generate the
required R_X86_64_32S relocation records for these truncated symbols.
However, subtracting the fixed constant 0xffffffff00000000 has the
same effect as truncation, and can be represented in a standard
R_X86_64_32 relocation record. We define the VIRTUAL() macro to
abstract away this truncation operation, and apply it to all
references by 32-bit (or 16-bit) assembly code to any symbols within
the .textdata section.
We define "virt_offset" for a 64-bit build as "the value to be added
to an address within .textdata in order to obtain its physical
address". With this definition, the low 32 bits of "virt_offset" can
be treated by 32-bit code as functionally equivalent to "virt_offset"
in a 32-bit build.
We define "text16" and "data16" for a 64-bit build as the physical
addresses of the .text16 and .data16 sections. Since a physical
address within the 32-bit address space may be used directly as a
64-bit virtual address (thanks to the identity map), this definition
provides the most natural access to variables in .text16 and .data16.
Note that this requires a minor adjustment in prot_to_real(), which
accesses .text16 using 32-bit virtual addresses.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[librm] Transition to protected mode within init_librm()
Long-mode operation will require page tables, which are too large to
sensibly fit in our .data16 segment in base memory.
Add a portion of init_librm() running in 32-bit protected mode to
provide access to high memory. Use this portion of init_librm() to
initialise the .textdata variables "virt_offset", "text16", and
"data16", eliminating the redundant (re)initialisation currently
performed on every mode transition as part of real_to_prot().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown