[tls] Ensure received data list is initialised before calling tls_free()
A failure in tls_generate_random() will result in a call to ref_put()
before the received data list has been initialised, which will cause
free_tls() to attempt to traverse an uninitialised list.
Fix by ensuring that all fields referenced by free_tls() are
initialised before any of the potential failure paths.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[librm] Ensure that inline code symbols are unique
Commit 6149e0a ("[librm] Provide symbols for inline code placed into
other sections") may cause build failures due to duplicate label names
if the compiler chooses to duplicate inline assembly code.
Fix by using the "%=" special format string to include a
guaranteed-unique number within the label name.
The "%=" will be expanded only if constraints exist for the inline
assembly. This fix therefore requires that all REAL_CODE() fragments
use a (possibly empty) constraint list.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[librm] Provide symbols for inline code placed into other sections
Provide symbols constructed from the object name and line number for
code fragments placed into alternative sections, such as inline
REAL_CODE() assembly placed into .text16. This simplifies the
debugging task of finding the source code corresponding to a given
instruction pointer.
Note that we cannot use __FUNCTION__ since it is not a preprocessor
macro and so cannot be concatenated with string literals.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[undi] Treat invalid IRQ numbers as non-fatal errors
If the underlying PXE stack reports an invalid IRQ number (above
IRQ_MAX), treat this as equivalent to an empty IRQ number and fall
back to using polling mode.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The existence of MMX and SSE is required by the System V x86_64 ABI
and so is assumed by gcc, but these registers are not preserved by our
own interrupt handlers and are unlikely to be preserved by other
context switch handlers in a boot firmware environment.
Explicitly prevent gcc from using MMX or SSE registers to avoid
potential problems due to silent register corruption.
We must remove the %xmm0-%xmm5 clobbers from the x86_64 version of
hv_call() since otherwise gcc will complain about unknown register
names. Theoretically, we should probably add code to explicitly
preserve the %xmm0-%xmm5 registers across a hypercall, in order to
guarantee to external code that these registers remain unchanged. In
practice this is difficult since SSE registers are disabled by
default: for background information see commits 71560d1 ("[librm]
Preserve FPU, MMX and SSE state across calls to virt_call()") and
dd9a14d ("[librm] Conditionalize the workaround for the Tivoli VMM's
SSE garbling").
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[rng] Use fixed-point calculations for min-entropy quantities
We currently perform various min-entropy calculations using build-time
floating-point arithmetic. No floating-point code ends up in the
final binary, since the results are eventually converted to integers
and asserted to be compile-time constants.
Though this mechanism is undoubtedly cute, it inhibits us from using
"-mno-sse" to prevent the use of SSE registers by the compiler.
Fix by using fixed-point arithmetic instead.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This is required to work around a bug in some firmware versions.
Signed-off-by: Ameer Mahagneh <ameerm@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[time] Add support for the ACPI power management timer
Allow the ACPI power management timer to be used if enabled via
TIMER_ACPI in config/timer.h. This provides an alternative timer on
systems where the standard 8254 PIT is unavailable or unreliable.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[efi] Provide Map_Mem() and associated UNDI callbacks
Some drivers are known to call the optional Map_Mem() callback without
first checking that the callback exists. Provide a usable basic
implementation of Map_Mem() along with the other callbacks that become
mandatory if Map_Mem() is provided.
Note that in theory the PCI I/O protocol is allowed to require
multiple calls to Map(), with each call handling only a subset of the
overall mapped range. However, the reference implementation in EDK2
assumes that a single Map() will always suffice, so we can probably
make the same simplifying assumption here.
Tested with the Intel E3522X2.EFI driver (which, incidentally, fails
to cleanly remove one of its mappings).
Originally-implemented-by: Maor Dickman <maord@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[lacp] Check the partner's own state when checking for blocked links
The blocked link test in eth_slow_lacp_rx() is performed before the
actor TLV is copied to the partner TLV, and so must test the actor
state field rather than the partner state field.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some CAs provide non-functional OCSP servers, and some clients are
forced to operate on networks without access to the OCSP servers.
Allow the user to explicitly disable the use of OCSP checks by
undefining OCSP_CHECK in config/crypto.h.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Limit the profile sample count to INT_MAX to avoid both signed
overflow and a potential division by zero when updating the stored
mean value.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[lacp] Mark link as blocked if partner is not yet up and running
Mark the link as blocked if the LACP partner is not reporting itself
as being in sync, collecting, and distributing.
This matches the behaviour for STP: we mark the link as blocked if we
detect that the switch is actively blocking traffic, in order to
extend the DHCP discovery period and so prevent boot failures on
switches that take an excessively long time to enable ports.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove the global variable shomron_nodnic_supported, since it may have
different values for different PCI devices.
Originally-fixed-by: Mohammed Taha <mohammedt@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[librm] Add facility to provide register and stack dump for CPU exceptions
When DEBUG=librm_mgmt is enabled, intercept CPU exceptions and provide
a register and stack dump, then drop to an emergency shell. Exiting
from the shell will almost certainly not work, but this provides an
opportunity to view the register and stack dump and carry out some
basic debugging.
Note that we can intercept only the first 8 CPU exceptions, since a
PXE ROM is not permitted to rebase the PIC.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[efi] Drop to TPL_APPLICATION when gathering entropy
Commit c89a446 ("[efi] Run at TPL_CALLBACK to protect against UEFI
timers") introduced a regression in the EFI entropy gathering code.
When the EFI_RNG_PROTOCOL is not present, we fall back to using timer
interrupts (as for the BIOS build). Since timer interrupts are
disabled at TPL_CALLBACK, WaitForEvent() fails and no entropy can be
gathered.
Fix by dropping to TPL_APPLICATION while entropy gathering is enabled.
Reported-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Tested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The iSCSI root path may contain a literal IPv6 address. Update the
parser to handle this address format correctly.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[efi] Run at TPL_CALLBACK to protect against UEFI timers
As noted in the comments, UEFI manages to combines the all of the
worst aspects of both a polling design (inefficiency and inability to
sleep until something interesting happens) and of an interrupt-driven
design (the complexity of code that could be preempted at any time,
thanks to UEFI timers).
This causes problems in particular for UEFI USB keyboards: the
keyboard driver calls UsbAsyncInterruptTransfer() to set up a periodic
timer which is used to poll the USB bus. This poll may interrupt a
critical section within iPXE, typically resulting in list corruption
and either a hang or reboot.
Work around this problem by mirroring the BIOS design, in which we run
with interrupts disabled almost all of the time.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[xhci] Consume event TRB before reporting completion to USB core
Reporting a completion via usb_complete() will pass control outside
the scope of xhci.c, and could potentially result in a further call to
xhci_event_poll() before returning from usb_complete(). Since we
currently update the event consumer counter only after calling
usb_complete(), this can result in duplicate completions and
consequent corruption of the submission TRB ring structures.
Fix by updating the event ring consumer counter before passing control
to usb_complete().
Reported-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Tested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[intel] Work around broken reset mechanism in i219 devices
The i219 appears to have a seriously broken reset mechanism. After
any transmit or receive activity, resetting the card will break both
the transmit and receive datapaths until the next PCI bus reset.
The Linux and BSD drivers include a convoluted workaround authored by
Intel which involves setting a bit in the undocumented FEXTNVM11
register, then transmitting a dummy 512-byte packet containing garbage
data, then reconfiguring the receive descriptor prefetch thresholds
and temporarily reenabling the receive datapath. The comments in the
Intel fix do not even remotely match what the code actually does, and
the code accidentally leaves the transmitter enabled after use.
Experimentation suggests that an equivalent fix is to simply set the
undocumented bit in FEXTNVM11 before enabling the transmit or receive
descriptor rings.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[xhci] Assume an invalid PSI table if any invalid PSI value is observed
Invalid protocol speed ID tables appear to be increasingly common in
the wild, to the point that it is infeasible to apply an explicit
XHCI_BAD_PSIV flag for each offending PCI device ID.
Fix by assuming an invalid PSI table as soon as any invalid value is
reported by the hardware.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[ena] Fix spurious uninitialised variable warning on older versions of gcc
Some older versions of gcc (observed with gcc 4.7.2) report a spurious
uninitialised variable warning in ena_get_device_attributes(). Work
around this warning by manually inlining the relevant code (which has
only a single call site).
Reported-by: xbgmsharp <xbgmsharp@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[netdevice] Make netdev_irq_enabled() independent of netdev_irq_supported()
The UNDI layer uses the NETDEV_IRQ_ENABLED flag to choose whether to
return PXENV_UNDI_ISR_OUT_OURS or PXENV_UNDI_ISR_OUT_NOT_OURS for a
given interrupt. For a network device that does not support
interrupts, the flag will never be set and so pxenv_undi_isr() will
always return PXENV_UNDI_ISR_OUT_NOT_OURS. This causes some NBPs
(such as lpxelinux.0) to hang.
Redefine NETDEV_IRQ_ENABLED as a simple administrative flag which can
be set even on network devices that do not support interrupts. This
allows pxenv_undi_isr() (which is the sole user of NETDEV_IRQ_ENABLED)
to function as expected by lpxelinux.0.
Signed-off-by: Martin Habets <mhabets@solarflare.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Most drivers do not utilise an MII interface, since the link state is
typically available directly from a memory-mapped register.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Using "ld --oformat binary" for mbr.bin and usbdisk.bin seems to cause
segmentation faults on some versions of binutils (observed on Fedora
27). Work around this problem by using ld to create an intermediate
ELF object, followed by objcopy (via the existing %.tmp -> %.bin rule)
to create the final binary.
Note that we cannot simply use a single-stage "objcopy -O binary"
since this will not process the relocation records for x86_64: see
commit 1afcccd ("[build] Do not use "objcopy -O binary" for objects
with relocation records").
Reported-by: Brent S <bts@square-r00t.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add missing FILE_LICENCE declarations to x86_64 headers based on the
corresponding i386 headers (from which the x86_64 headers were
originally derived).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[image] Omit URI query string and fragment from download progress messages
The URIs printed as part of download progress messages are intended to
provide a quick visual progress indication to the user. Very long
query strings can render this visual indication useless in practice,
since the most important information (generally the URI host and path)
is drowned out by multiple lines of human-illegible URI-encoded data.
Omit the query string entirely from the download progress message.
For consistency and brevity, also omit the URI fragment along with the
username and password (which was previously redacted anyway).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[http] Report unsuccessful response status lines at DBGVL_LOG
The precise HTTP response status code is currently visible only at
DBGLVL_EXTRA. Allow for easier debugging by reporting the whole
status line at DBGLVL_LOG for any unsuccessful responses.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[xen] Skip probing of any unsupported device types
Xen 4.4 includes the device "device/suspend/event-channel" which does
not have a "backend" key. This currently causes the entire XenBus
device tree probe to fail.
Fix by skipping probe attempts for device types for which there is no
iPXE driver.
Debugged-by: Eytan Heidingsfeld <eytanh@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[http] Handle parsing of WWW-Authenticate header within authentication scheme
Allow individual authentication schemes to parse WWW-Authenticate
headers that do not comply with RFC2617.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[http] Gracefully handle offers of multiple authentication schemes
Servers may provide multiple WWW-Authenticate headers, each offering a
different authentication scheme. We currently fail the request as
soon as we encounter an unrecognised scheme, which prevents subsequent
offers from succeeding.
Fix by silently ignoring headers for schemes that we do not recognise.
If no schemes are recognised then the request will eventually fail
anyway due to the 401 response code.
If multiple schemes are supported, arbitrarily choose the scheme
appearing first within the response headers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown