[legal] Relicense files under GPL2_OR_LATER_OR_UBDL
Several of the assembly files in arch/i386/prefix were missed by the
automated relicensing tool due to missing licence declarations, code
dating back to the initial git revision, etc. Manual review shows
that these files may be relicensed.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[smsc75xx] Add driver for SMSC/Microchip LAN75xx USB Ethernet NICs
This driver is functional but any downloads via a TCP-based protocol
tend to perform poorly. The 1Gbps Ethernet line rate is substantially
higher than the 480Mbps (in practice around 280Mbps) provided by USB2,
and the device has only 32kB of internal buffer memory. Our 256kB TCP
receive window therefore rapidly overflows the RX FIFO, leading to
multiple dropped packets (usually within the same TCP window) and
hence a low overall throughput.
Reducing the TCP window size so that the RX FIFO does not overflow
greatly increases throughput, but is not a general-purpose solution.
Further investigation is required to determine how other OSes
(e.g. Linux) cope with this scenario. It is possible that
implementing TCP SACK would provide some benefit.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Most devices expose at least the link up/down status via a bit in a
MAC register, since the MAC generally already needs to know whether or
not the link is up. Some devices (e.g. the SMSC75xx USB NIC) expose
this information to software only via the MII registers.
Provide a generic mii_check_link() implementation to check the BMSR
and report the link status via netdev_link_{up,down}().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Microsoft IIS supports only MD5-sess for Digest authentication.
Requested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[xen] Set the "feature-rx-notify" flag for netfront devices
iPXE already sends RX notifications to the backend when needed, but
does not set the "feature-rx-notify" flag. As of XenServer 6.5, this
flag is mandatory and omitting it will cause the backend to fail.
Fix by setting the "feature-rx-notify" flag, to inform the backend
that we will send notifications.
Reported-by: Shalom Bhooshi <shalom.bhooshi@citrix.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[xhci] Undo PCH-specific quirk fixes when removing device
Restore the original values of XUSB2PR and USB3PSSEN, in case we are
booting an OS with no support for xHCI.
Suggested-by: Dan Ellis <Dan.Ellis@displaylink.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[xhci] Enable USB3 ports on Intel PCH8/PCH9 controllers
Intel PCH controllers default to routing USB2 ports to EHCI rather
than xHCI, and default to disabling SuperSpeed connections.
Manipulate the PCI configuration space registers as necessary to
reroute ports and enable SuperSpeed.
Originally-fixed-by: Dan Ellis <Dan.Ellis@displaylink.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[legal] Relicense files under GPL2_OR_LATER_OR_UBDL
Relicense files with kind permission from
Stefan Hajnoczi <stefanha@redhat.com>
alongside the contributors who have already granted such relicensing
permission.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Rewrite (and relicense) the header files which are included in all
builds of iPXE (including non-Linux builds).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
At some point in the past few years, binutils became more aggressive
at removing unused symbols. To function as a symbol requirement, a
relocation record must now be in a section marked with @progbits and
must not be in a section which gets discarded during the link (either
via --gc-sections or via /DISCARD/).
Update REQUIRE_SYMBOL() to generate relocation records meeting these
criteria. To minimise the impact upon the final binary size, we use
existing symbols (specified via the REQUIRING_SYMBOL() macro) as the
relocation targets where possible. We use R_386_NONE or R_X86_64_NONE
relocation types to prevent any actual unwanted relocation taking
place. Where no suitable symbol exists for REQUIRING_SYMBOL() (such
as in config.c), the macro PROVIDE_REQUIRING_SYMBOL() can be used to
generate a one-byte-long symbol to act as the relocation target.
If there are versions of binutils for which this approach fails, then
the fallback will probably involve killing off REQUEST_SYMBOL(),
redefining REQUIRE_SYMBOL() to use the current definition of
REQUEST_SYMBOL(), and postprocessing the linked ELF file with
something along the lines of "nm -u | wc -l" to check that there are
no undefined symbols remaining.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The valgrind headers are not x86-specific; they detect the CPU
architecture and contain inline assembly for multiple architectures.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Use list_first_entry() when unregistering child settings
Unregistering a child settings block can have almost arbitrary
effects, due to the call to apply_settings(). Avoid potentially
dereferencing a stale pointer by using list_first_entry() rather than
list_for_each_entry_safe() to iterate over the list of child settings.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The code in list.h was originally taken from the Linux kernel many
years ago, but has been rewritten to the point that no original code
remains, and may therefore be relicensed.
The functions and data structures remain largely API-compatible, to
facilitate the conversion of Linux network drivers to iPXE.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[legal] Relicense files under GPL2_OR_LATER_OR_UBDL
These files cannot be automatically relicensed by util/relicense.pl
since they either contain unusual but trivial contributions (such as
the addition of __nonnull function attributes), or contain lines
dating back to the initial git revision (and so require manual
knowledge of the code's origin).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[legal] Relicense files under GPL2_OR_LATER_OR_UBDL
Relicense files authored by Dan Lynch while working as an employee of
Fen Systems Ltd., with permission from Fen Systems Ltd.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The UBDL relicensing tool (util/relicense.pl) is designed to identify
files which may be relicensed under a dual GPL+UBDL licence. It uses
git-blame to identify the author of each line (using the -M and -C
options to track lines moved or copied between files), and relicenses
files for which all authors have given permission.
The relicensing tool will ignore certain types of lines identified by
git-blame:
- empty lines
- comments
- standalone opening or closing braces
- "#include ..."
- "return 0;"
- "return rc;"
- "PCI_ROM(...)"
- "FILE_LICENCE(...)"
These lines either contain no meaningful content (e.g. empty lines),
contain only non-copyrightable facts (e.g. PCI ROM IDs) or are
sufficiently common within the codebase that git-blame is likely to
misattribute their origin (e.g. "return 0").
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[legal] Add support for the Unmodified Binary Distribution Licence
Add the text for the Unmodified Binary Distribution Licence. This
Licence allows for the distribution of unmodified binaries built from
publicly available source code, without imposing the obligations of
the GNU General Public License upon anyone who chooses to distribute
only the unmodified binaries built from that source code. See the
licence text for the precise terms and conditions.
Add the licence GPL2_OR_LATER_OR_UBDL to the set of licences which can
be declared using FILE_LICENCE(), and add the corresponding support to
licence.pl.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[legal] Include full licence text for all GPL2_OR_LATER files
Add the standard warranty disclaimer and Free Software Foundation
address paragraphs to the licence text where these are not currently
present.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Update the GPLv2 licence text to the current version (with the current
address of the Free Software Foundation, and without the Y2k
compatibility issue).
Rename the GPLv2 licence text to COPYING.GPLv2 (to hopefully make it
clearer that the licence does not apply to all files within the source
tree) and rename COPYRIGHTS to COPYING.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[zbin] Fix check for existence of most recent output byte
The code in lzma_literal() checks to see if we are at the start of the
compressed input data in order to determine whether or not a most
recent output byte exists. This check is incorrect, since
initialisation of the decompressor will always consume the first five
bytes of the compressed input data.
Fix by instead checking whether or not we are at the start of the
output data stream. This is, in any case, a more logical check.
This issue was masked during development and testing since virtual
machines tend to zero the initial contents of RAM; the spuriously-read
"most recent output byte" is therefore likely to already be a zero
when running in a virtual machine.
Reported-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[zbin] Allow decompressor to generate debug output via BIOS console
The 0xe9 debug port exists only on virtual machines. Provide an
option to print debug output on the BIOS console, to allow for
debugging on real hardware.
Note that this option can be used only if the decompressor is called
in flat real mode; the easiest way to achieve this is to build with
DEBUG=libprefix.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown