It is often the case that some module of gPXE is only relevant if the
subsystem it depends on is already being included. For instance,
commands to manage wireless interfaces are quite useless if no
compiled-in driver has pulled in the wireless networking stack. There
may be a user-modifiable configuration options for these dependent
modules, but even if enabled, they should not be included when they
would be useless.

Solve this by allowing the creation of config_subsystem.c, for
configuration directives like those in the global config.c that should
only be considered when subsystem.c is included in the final gPXE
build.

For consistency, move core/config.c to the config/ directory, where
the other config_subsystem.c files will eventually reside.

Signed-off-by: Marty Connor <mdc@etherboot.org>

SRP is the SCSI RDMA Protocol.  It allows for a method of SAN booting
whereby the target is responsible for reading and writing data using
Remote DMA directly to the initiator's memory.  The software initiator
merely sends and receives SCSI commands; it never has to touch the
actual data.

These commands can be used to activate or deactivate the PXE API (on a
specifiable network interface).

This is currently of limited use, since most image formats will call
shutdown() before booting the image, meaning that the underlying net
device gets shut down during remove_devices() anyway.

Add FILE_LICENCE declarations to almost all files that make up the
various standard builds of gPXE.

Modified-by: Michael Brown <mcb30@etherboot.org>
Signed-off-by: Michael Brown <mcb30@etherboot.org>

Signed-off-by: Michael Brown <mcb30@etherboot.org>

This patch extends the embedded image feature to allow multiple
embedded images instead of just one.

gPXE now always boots the first embedded image on startup instead of
doing the hardcoded DHCP boot (aka autoboot).

Based heavily upon a patch by Stefan Hajnoczi <stefanha@gmail.com>.

We have EFI APIs for CPU I/O, PCI I/O, timers, console I/O, user
access and user memory allocation.

EFI executables are created using the vanilla GNU toolchain, with the
EXE header handcrafted in assembly and relocations generated by a
custom efilink utility.

Add yet another ugly hack to iscsiboot.c, this time to allow the user to
inhibit the shutdown/removal of the iSCSI INT13 device (and the network
devices, since they are required for the iSCSI device to function).

On the plus side, the fact that shutdown() now takes flags to
differentiate between shutdown-for-exit and shutdown-for-boot means that
another ugly hack (to allow returning via the PXE stack on BIOSes that
have broken INT 18 calls) will be easier.

I feel dirty.

This commit implements GDB over UDP.  Using UDP is more complex than
serial and has required some restructuring.

The GDB stub is now built using one or both of GDBSERIAL and GDBUDP
config.h options.

To enter the debugger, execute the gPXE shell command:
gdbstub <transport> [<options>...]

Where <transport> is "serial" or "udp".  For "udp", the name of a
configured network device is required:
gdbstub udp net0

The GDB stub listens on UDP port 43770 by default.

Delete ELF as a generic image type.  The method for invoking an
ELF-based image (as well as any tables that must be set up to allow it
to boot) will always depend on the specific architecture.  core/elf.c
now only provides the elf_load() function, to avoid duplicating
functionality between ELF-based image types.

Add arch/i386/image/elfboot.c, to handle the generic case of 32-bit
x86 ELF images.  We don't currently set up any multiboot tables, ELF
notes, etc.  This seems to be sufficient for loading kernels generated
using both wraplinux and coreboot's mkelfImage.

Note that while Etherboot 5.4 allowed ELF images to return, we don't.
There is no callback mechanism for the loaded image to shut down gPXE,
which means that we have to shut down before invoking the image.  This
means that we lose device state, protection against being trampled on,
etc.  It is not safe to continue afterwards.

See http://etherboot.org/wiki/dev/gdbstub for documentation.

The GDBSYM config.h option was an attempt at QEMU GDB debugging.  I have
removed the code since it is unused and may confuse people wanting to
use the GDB stub.

IPv4 may not always be dragged into the link, so add a specific
configuration option for it.

	Timer subsystem initialization code in core/timer.c

	Split the BIOS and RTDSC timer drivers from i386_timer.c

	Split arch/i386/firmware/pcbios/bios.c into the RTSDC
	timer driver and arch/i386/core/nap.c

	Split the headers properly:
		include/unistd.h - delay functions to be used by the
					gPXE core and drivers.

		include/gpxe/timer.h - the fimer subsystem interface
					to be used by the timer drivers
					and currticks() to be used by
					the code gPXE subsystems.

		include/latch.h	- removed
		include/timer.h - scheduled for removal. Some driver
					are using currticks, which is
					only for core subsystems.

Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>

Kill off use of etherboot.h outside drivers/net.

output buffering defintions and the like)

Added basic El Torito ISO image boot capability

Add IMAGE_PXE to use the new image format framework.  "kernel pxelinux.0"
now works.

Add scripts as an image format (since it's trivial to do).

can't modify it).

"boot" command to attempt booting from within the command shell, fall back
to shell if boot fails for any reason.

need for a CONFIG_RELOCATE.