Most of the 3c90x.txt file is obsolete.  The content from the file has
been placed here:

   http://etherboot.org/wiki/appnotes/3c90x_issues

This is a major rewrite of the legacy etherboot 3c90x driver using the
gPXE API for much improved performance over the legacy driver it
replaces.

This driver has been tested on 3c905, 3c905B, and 3c905C cards.

Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Marty Connor <mdc@etherboot.org>
Tested-by: Marty Connor <mdc@etherboot.org>
Tested-by: Daniel Verkamp <daniel@drv.nu>

Signed-off-by: Marty Connor <mdc@etherboot.org>

Eliminate the potential for mismatches between table names and the
table entry data type by incorporating the data type into the
definition of the table, rather than specifying it explicitly in each
table accessor method.

Intel's C compiler (icc) chokes on the zero-length arrays that we
currently use as part of the mechanism for accessing linker table
entries.  Abstract away the zero-length arrays, to make a port to icc
easier.

Introduce macros such as for_each_table_entry() to simplify the common
case of iterating over all entries in a linker table.

Represent table names as #defined string constants rather than
unquoted literals; this avoids visual confusion between table names
and C variable or type names, and also allows us to force a
compilation error in the event of incorrect table names.

Some firewall devices seem to regard SYN,PSH as an invalid flag
combination and reject the packet.  Fix by setting PSH only if SYN is
not set.

Reported-by: DSE Incorporated <dseinc@gmail.com>

Signed-off-by: Michael Brown <mcb30@etherboot.org>

The parsing of the !PXE and PXENV+ structures share a fair bit of
code; merge the common code to save a few bytes.

Signed-off-by: Michael Brown <mcb30@etherboot.org>

Allow for settings blocks to be created on demand.  This allows for
constructions such as

  set defaults/filename http://bootserver/bootfile
  set defaults/priority 0xff
  dhcp net0
  chain ${filename}

which will boot from the DHCP-provided filename, or from
"http://bootserver/bootfile" if the DHCP server does not provide a
filename.

(Note that "priority" gets interpreted as a signed integer, so setting
"defaults/priority" to 0xff will cause the "defaults" settings block
to have an effective priority of -1.)

Following the example of the Linux driver, we add a check and delay to
make sure that the NIC has finished resetting before the driver issues
any additional commands.

Signed-off-by: Marty Connor <mdc@etherboot.org>

This directory contains the old Etherboot implementation of IPoIB boot
from Mellanox, which has long been obsoleted by gPXE's own
implementation.

Having a default script containing

  #!gpxe
  autoboot

can cause problems when entering commands to load and start a kernel
manually; the default script image will still be present when the
kernel is started and so will be treated as an initrd.  It is possible
to work around this by typing "imgfree" before any other commands, but
this is counter-intuitive.

Fix by allowing the embedded image list to be empty (in which case we
just call autoboot()), and making this the default.

Reported by alkisg@gmail.com.

The "chain" command combines the functions of "imgfetch", "imgload",
and "boot".

    chain http://etherboot.org/gtest/gtest.gpxe

is equivalent to:

    kernel http://etherboot.org/gtest/gtest.gpxe
    boot

This is not strictly an entry requirement, but it does mean that a PXE
NBP returning without setting %ax will appear to have returned
success.

Search for the PXE entry points (via the !PXE or PXENV+ structures)
through all known combinations of search methods.  Furthermore, if we
find a PXENV+ structure, attempt to use it to find the !PXE structure
if at all possible.

Avoid passing credentials in the iBFT that were available but not
required for login.  This works around a problem in the Microsoft
iSCSI initiator, which will refuse to initiate sessions if the CHAP
password is fewer than 12 characters, even if the target ends up not
asking for CHAP authentication.

Given any block cipher, a corresponding CBC mode of behaviour for the
cipher can be created using the CBC_CIPHER() macro.

It is a programming error, not a runtime error, if we attempt to use
block ciphers with an incorrect blocksize, so use an assert() rather
than an error status return.

The various types of cryptographic algorithm are fundamentally
different, and it was probably a mistake to try to handle them via a
single common type.

pubkey_algorithm is a placeholder type for now.

Although the nature of the hack is essentially unchanged, this allows
us to remove the hardcoded assumption in tls.c that the RX cipher is
AES.

The PXE 1.x spec specifies that on NBP entry or on return from INT
1Ah AX=5650h, EDX shall point to the physical address of the PXENV+
structure.  The PXE 2.x spec drops this requirement, simply stating
that EDX is clobbered.  Given the principle "be conservative in what
you send, liberal in what you accept", however, we should implement
this anyway.

Certain combinations of PXE stack and BIOS result in a broken INT 18
call, which will leave the system displaying a "PRESS ANY KEY TO
REBOOT" message instead of proceeding to the next boot device.  On
these systems, returning via the PXE stack is the only way to continue
to the next boot device.  Returning via the PXE stack works only if we
haven't already blown away the PXE base code in pxeprefix.S.

In most circumstances, we do want to blow away the PXE base code.
Base memory is a limited resource, and it is desirable to reclaim as
much as possible.  When we perform an iSCSI boot, we need to place the
iBFT above the 512kB mark, because otherwise it may not be detected by
the loaded OS; this may not be possible if the PXE base code is still
occupying that memory.

Introduce a new prefix type .kkpxe which will preserve both the PXE
base code and the UNDI driver (as compared to .kpxe, which preserves
the UNDI driver but uninstalls the PXE base code).  This prefix type
can be used on systems that are known to experience the specific
problem of INT 18 being broken, or in builds (such as gpxelinux.0) for
which it is particularly important to know that returning to the BIOS
will work.

Written by H. Peter Anvin <hpa@zytor.com> and Stefan Hajnoczi
<stefanha@gmail.com>, minor structural alterations by Michael Brown
<mcb30@etherboot.org>.

This change makes it possible to break the PXE-chaining infinite loop
even when restricted to a Windows DHCP server.

Send authentication information if the username is present, even if
the password is empty.

Other vendor PXE stacks tend to allow the Escape key to be used to
abort menu selection.  Allow Escape (as well as Ctrl-C) to abort
selection.

COMBOOT images use INTs to issue API calls; these end up making calls
into gPXE from real mode, and so temporarily change the real-mode
stack pointer.  When our COMBOOT code uses a longjmp() to implement
the various "exit COMBOOT image" API calls, this leaves the real-mode
stack pointer stuck with its temporary value, which causes problems if
we eventually try to exit out of gPXE back to the BIOS.

Fix by adding rmsetjmp() and rmlongjmp() calls (analogous to
sigsetjmp()/siglongjmp()); these save and restore the additional state
needed for real-mode calls to function correctly.

When chaining COMBOOT images, the old images now get freed correctly.

Multi-level menus via COMBOOT rely on the COMBOOT program being able
to exit and invoke a new COMBOOT program (the next menu).  This works,
but rapidly (within about five iterations) runs out of space in gPXE's
internal stack, since each new image is executed in a new function
context.

Fix by allowing tail recursion between images; an image can now
specify a replacement image for itself, and image_exec() will perform
the necessary tail recursion.

The version of the GNU assembler shipped with Fedora 10
(2.18.50.0.9-8.fc10) complains about character literals in some of our
assembly code.  Changing $'x' to $( 'x' ) seems to fix the problem.
Yes, the whitespace is required; using just $('x') does not work.

Reported by Kevin O'Connor <kevin@koconnor.net>.

GCC did not support #pragma GCC visibility until version 4.0.

Both the script and PXE images types will claim a zero-length image.
Inhibit this to avoid end-user surprises.

This patch extends the embedded image feature to allow multiple
embedded images instead of just one.

gPXE now always boots the first embedded image on startup instead of
doing the hardcoded DHCP boot (aka autoboot).

Based heavily upon a patch by Stefan Hajnoczi <stefanha@gmail.com>.

There are code paths other than PMM allocation that can result in our
changing the ROM checksum.  For example, we attempt to update our
product string to incorporate the PCI bus:dev.fn number.  In a system
that does not support PMM, we could therefore end up with an incorrect
checksum.

Fix by attempting to update the checksum unconditionally.

Add --fatal-warnings to ASFLAGS; this is the equivalent of -Werror in
CFLAGS (which we have used since July 2007).

Try to avoid future problems caused by implicit section flags and/or
type information by instituting a policy that all .section
declarations must explicitly state the flags and type.

Most of this change was achieved using

    perl -pi \
      -e 's/".text"$/".text", "ax", \@progbits/ ; ' \
      -e 's/".text16"$/".text16", "ax", \@progbits/ ; ' \
      -e 's/".text16.null"$/".text16.null", "ax", \@progbits/ ; ' \
      -e 's/".text16.data"$/".text16.data", "aw", \@progbits/ ; ' \
      -e 's/".data"$/".data", "aw", \@progbits/ ; ' \
      -e 's/".data16"$/".data16", "aw", \@progbits/ ; ' \
      -e 's/".bss"$/".bss", "aw", \@nobits/ ; ' \
      -e 's/".bss16"$/".bss16", "aw", \@nobits/ ; ' \
      -e 's/".prefix"$/".prefix", "ax", \@progbits/ ; ' \
      -e 's/".prefix.lib"$/".prefix.lib", "awx", \@progbits/ ; ' \
      -e 's/".prefix.data"$/".prefix.data", "aw", \@progbits/ ; ' \
      -e 's/".weak"$/".weak", "a", \@nobits/ ; ' \
      `git grep -l '\.section'`