Some newer versions of gcc (observed with a patched gcc 4.5.1) seem to
treat our offsetof() implementation as not being a compile-time
constant. Fix by using __builtin_offsetof() when available. (As with
the original offsetof() macro, this code is copied from the Linux
kernel's stddef.h.)
Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[fcoe] Use only the first instance of a FIP descriptor
Almost all FIP packets contain at most one instance of each
descriptor. A VLAN notification may contain multiple VLAN
descriptors. The FCoE specification does not provide any guidance
regarding prioritisation of VLANs, so we may choose to arbitrarily
choose the first listed VLAN.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
VLAN headers are allowed to contain a VLAN tag of zero, indicating
that the header specifies only a priority and that the packet does not
belong to any VLAN. The easiest way to handle this is to treat VLAN 0
as being a normal VLAN.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The increase in length in Fibre Channel device names causes the
"selected FCF" message to wrap beyond 80 characters. Fix by using
abbreviations where possible.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[fcoe] Create Fibre Channel port only when we have selected an FCF
Create the Fibre Channel port only when the FCoE port has selected a
Fibre Channel Forwarder to use. This avoids the confusion of having
an FC port created for the network device on which only VLAN discovery
is performed.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow the fragment list to be omitted when calling nvo_init().
Omitting the list will cause the whole of the NVS device to be used
for NVO storage.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Expansion of the (admittedly perverse) "aaa}bbb${ccc" will currently
fail because expand_command() does not check that the closing "}"
occurs later than the opening "${".
Fix by ensuring that the most recent opening "${" is used to match
against the first *subsequent* closing "}".
Total cost of this change: -12 bytes, bringing the overall cost of
this feature to -4 bytes.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Expansion of ${${foo}} will currently fail, because the first
opening "${" will be incorrectly matched against the first closing
"}", leading to an attempt to expand the variable "${foo".
Fix by ensuring that the most recent opening "${" is used to match
against the first closing "}".
Total cost: 8 bytes. :)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Allow "set" command to take an empty value
Allow "set <variable>" to be used to set the variable to an empty
value, if permitted by the setting type. Note that some settings
backends do not differentiate between an empty value and a
non-existent value, so this may or may not be equivalent to "clear
<variable>".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[autoboot] Merge "netboot" command into "autoboot"
Allow "autoboot" to accept an optional list of network devices, and
remove the "netboot" command. This saves around 130 bytes.
The "netboot" command has existed for approximately 48 hours, so its
removal should not cause backwards compatibility issues for anyone.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "isset" command can be used to determine whether or not a setting
is present. For example:
isset ${net0/ip} || dhcp net0 # If we have no IP address, try DHCP
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow script labels to be defined using the syntax
:<labelname>
(nothing else allowed on the line, including whitespace). Labels are
ignored during script execution, but can be used as the target of the
"goto" command. For example:
#!ipxe
goto machine_${net0/ip} || goto machine_default
# Linux kernel boot
:machine_10.0.0.101
:machine_10.0.0.102
set filename http://my.boot.server/vmlinuz
goto done
# Default configuration
:machine_default
set filename pxelinux.0
goto done
# Boot selected configuration
:done
chain ${filename}
Originally-implemented-by: Shao Miller <shao.miller@yrdsb.edu.on.ca>
Originally-implemented-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[cmdline] Add trivial logical operators to iPXE command lines
Make the "||" and "&&" operators available within iPXE commands. For
example:
dhcp net0 || set net0/ip 192.168.0.2
would attempt to acquire an IP address via DHCP, falling back to a
static address if DHCP fails.
As a side-effect, comments may now be appended to any line. For
example:
dhcp net0 || set net0/ip 192.168.0.2 # Try DHCP first, then static
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[pxe] Remove startpxe and stoppxe commands from default builds
These commands exist primarily for debugging and are not generally
useful, so save 137 bytes by removing them by default.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Command implementations tend to include a substantial amount of common
boilerplate code revolving around the parsing of command-line options
and arguments. This increases the size cost of each command.
Introduce an option-parsing library that abstracts out the common
operations involved in command implementations. This enables the size
of each individual command to be reduced, and also enhances
consistency between commands.
Total size of the library is 704 bytes, to be amortised across all
command implementations.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[netdevice] Allow per-device receive queue processing to be frozen
Several use cases (e.g. the UNDI API and the EFI SNP API) require
access to the raw network device receive queue, and so currently use
manual calls to netdev_poll() on a specific network device in order to
prevent received packets from being processed by the network stack.
As an alternative, provide a flag that allows receive queue processing
to be frozen on a per-device basis. When receive queue processing is
frozen, packets will be enqueued as normal, but will not be
automatically dequeued and passed up the network stack.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[undi] Support underlying UNDI devices that don't support interrupts
Some network cards do not generate interrupts when operated via the
UNDI API. Allow for this by waiting for the ISR to be triggered only
if the PXE stack advertises that it supports interrupts. When the PXE
stack does not advertise interrupt support, we skip the call to
PXENV_UNDI_ISR_IN_START and just poll the device using
PXENV_UNDI_ISR_IN_PROCESS. This matches the observed behaviour of at
least one other PXE NBP (emBoot's winBoot/i), so there is a reasonable
chance of this working.
Originally-implemented-by: Muralidhar Appalla <Muralidhar.Appalla@emulex.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown