Access to the gpxe.org and etherboot.org domains and associated
resources has been revoked by the registrant of the domain.  Work
around this problem by renaming project from gPXE to iPXE, and
updating URLs to match.

Also update README, LOG and COPYRIGHTS to remove obsolete information.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

It might be the case that we wish to chain to an NBP without
being "in the way".  We now implement a hook in our exit path
for gPXE *.*pxe build targets.  The hook is a pointer to a
SEG16:OFF16 which we try to jump to during exit.  By default,
this pointer results in the usual exit path.

We also implement the "pxenv_file_exit_hook" PXE API routine
to allow the user to specify an alternate SEG16:OFF16 to jump
to during exit.

Unfortunately, this additional PXE extension has a cost
in code size.  Fortunately, a look at the size difference
for a gPXE .rom build target shows zero size difference
after compression.

The routine is documented in doc/pxe_extensions as follows:

FILE EXIT HOOK

Op-Code:	PXENV_FILE_EXIT_HOOK (00e7h)

Input:	Far pointer to a t_PXENV_FILE_EXIT_HOOK parameter
		structure that has been initialized by the caller.

Output:	PXENV_EXIT_SUCCESS or PXENV_EXIT_FAILURE must be
		returned in AX.  The Status field in the parameter
		structure must be set to one of the values represented
		by the PXENV_STATUS_xxx constants.

Description:Modify the exit path to jump to the specified code.
		Only valid for pxeprefix-based builds.

typedef struct s_PXENV_FILE_EXIT_HOOK {
        PXENV_STATUS_t Status;
        SEGOFF16_t Hook;
} t_PXENV_FILE_EXIT_HOOK;

Set before calling API service:

Hook:	The SEG16:OFF16 of the code to jump to.

Returned from API service:

Status:	See PXENV_STATUS_xxx constants.

Requested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Shao Miller <shao.miller@yrdsb.edu.on.ca>
Signed-off-by: Marty Connor <mdc@etherboot.org>

Add FILE_LICENCE declarations to almost all files that make up the
various standard builds of gPXE.

Etherboot 5.4 erroneously treats PXENV_UNLOAD_STACK as the "final
shutdown" call, and unhooks INT15.  When using gPXE's undionly.kpxe,
this results in gPXE overwriting the portion of Etherboot located in
high memory, because it is no longer hidden from the system memory map
at the time that gPXE loads.

Work around this by explicitly testing for Etherboot as the underlying
PXE stack (as is already done in undinet.c) and skipping the call to
PXENV_UNLOAD_STACK if necessary.

The parsing of the !PXE and PXENV+ structures share a fair bit of
code; merge the common code to save a few bytes.

Signed-off-by: Michael Brown <mcb30@etherboot.org>

Search for the PXE entry points (via the !PXE or PXENV+ structures)
through all known combinations of search methods.  Furthermore, if we
find a PXENV+ structure, attempt to use it to find the !PXE structure
if at all possible.

Certain combinations of PXE stack and BIOS result in a broken INT 18
call, which will leave the system displaying a "PRESS ANY KEY TO
REBOOT" message instead of proceeding to the next boot device.  On
these systems, returning via the PXE stack is the only way to continue
to the next boot device.  Returning via the PXE stack works only if we
haven't already blown away the PXE base code in pxeprefix.S.

In most circumstances, we do want to blow away the PXE base code.
Base memory is a limited resource, and it is desirable to reclaim as
much as possible.  When we perform an iSCSI boot, we need to place the
iBFT above the 512kB mark, because otherwise it may not be detected by
the loaded OS; this may not be possible if the PXE base code is still
occupying that memory.

Introduce a new prefix type .kkpxe which will preserve both the PXE
base code and the UNDI driver (as compared to .kpxe, which preserves
the UNDI driver but uninstalls the PXE base code).  This prefix type
can be used on systems that are known to experience the specific
problem of INT 18 being broken, or in builds (such as gpxelinux.0) for
which it is particularly important to know that returning to the BIOS
will work.

Written by H. Peter Anvin <hpa@zytor.com> and Stefan Hajnoczi
<stefanha@gmail.com>, minor structural alterations by Michael Brown
<mcb30@etherboot.org>.

The version of the GNU assembler shipped with Fedora 10
(2.18.50.0.9-8.fc10) complains about character literals in some of our
assembly code.  Changing $'x' to $( 'x' ) seems to fix the problem.
Yes, the whitespace is required; using just $('x') does not work.

Reported by Kevin O'Connor <kevin@koconnor.net>.

Try to avoid future problems caused by implicit section flags and/or
type information by instituting a policy that all .section
declarations must explicitly state the flags and type.

Most of this change was achieved using

    perl -pi \
      -e 's/".text"$/".text", "ax", \@progbits/ ; ' \
      -e 's/".text16"$/".text16", "ax", \@progbits/ ; ' \
      -e 's/".text16.null"$/".text16.null", "ax", \@progbits/ ; ' \
      -e 's/".text16.data"$/".text16.data", "aw", \@progbits/ ; ' \
      -e 's/".data"$/".data", "aw", \@progbits/ ; ' \
      -e 's/".data16"$/".data16", "aw", \@progbits/ ; ' \
      -e 's/".bss"$/".bss", "aw", \@nobits/ ; ' \
      -e 's/".bss16"$/".bss16", "aw", \@nobits/ ; ' \
      -e 's/".prefix"$/".prefix", "ax", \@progbits/ ; ' \
      -e 's/".prefix.lib"$/".prefix.lib", "awx", \@progbits/ ; ' \
      -e 's/".prefix.data"$/".prefix.data", "aw", \@progbits/ ; ' \
      -e 's/".weak"$/".weak", "a", \@nobits/ ; ' \
      `git grep -l '\.section'`

Code paths that automatically allocate memory from the FBMS at 40:13
should also free it, if possible.

Freeing this memory will not be possible if either

  1. The FBMS has been modified since our allocation, or

  2. We have not been able to unhook one or more BIOS interrupt vectors.

This allows multiple gPXE ROMs in a system to be disambiguated at boot
time; the PCI ID will show up in the boot menu for a BBS-compliant BIOS.

Move the printing functions from pxeprefix.S into libprefix.S, so they
are available for debug from any prefix.

clean separation between loading and starting, but does mean that more
PXE stacks survive the process.

addresses if the signature checks fail.

we can never return to the PXE stack and must always use INT 18.

Record all information required for populating a struct undi_device.

Make debugging output more human-readable.

and call UNDI_SHUTDOWN first to make sure the NIC is in a safe state.

memory (unless we get an error while stopping the base code).  Leave UNDI
resident (though stopped) for .kpxe.

Still need to add code to record the device identification parameters
prior to stopping UNDI.

mechanism has changed anyway, and so must be rewritten, but at least doing
this makes the output of "make symcheck" more legible.