[legal] Include full licence text for all GPL2_OR_LATER files
Add the standard warranty disclaimer and Free Software Foundation
address paragraphs to the licence text where these are not currently
present.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Update the GPLv2 licence text to the current version (with the current
address of the Free Software Foundation, and without the Y2k
compatibility issue).
Rename the GPLv2 licence text to COPYING.GPLv2 (to hopefully make it
clearer that the licence does not apply to all files within the source
tree) and rename COPYRIGHTS to COPYING.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[zbin] Fix check for existence of most recent output byte
The code in lzma_literal() checks to see if we are at the start of the
compressed input data in order to determine whether or not a most
recent output byte exists. This check is incorrect, since
initialisation of the decompressor will always consume the first five
bytes of the compressed input data.
Fix by instead checking whether or not we are at the start of the
output data stream. This is, in any case, a more logical check.
This issue was masked during development and testing since virtual
machines tend to zero the initial contents of RAM; the spuriously-read
"most recent output byte" is therefore likely to already be a zero
when running in a virtual machine.
Reported-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[zbin] Allow decompressor to generate debug output via BIOS console
The 0xe9 debug port exists only on virtual machines. Provide an
option to print debug output on the BIOS console, to allow for
debugging on real hardware.
Note that this option can be used only if the decompressor is called
in flat real mode; the easiest way to achieve this is to build with
DEBUG=libprefix.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[prefix] Call decompressor in flat real mode when DEBUG=libprefix is enabled
Allow the decompressor the option of generating debugging output via
the BIOS console by calling it in flat real mode (rather than 16-bit
protected mode) when libprefix.S is built with debugging enabled.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[zbin] Perform extra normalisation after completing decompression
LZMA performs an extra normalisation after decompression is complete,
which does not affect the output but may consume an extra byte from
the input (and so may affect which byte is identified as being the
start of the next block).
Reported-by: Robin Smidsrød <robin@smidsrod.no>
Tested-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[dhcp] Extract timing parameters out to config/dhcp.h
iPXE uses DHCP timeouts loosely based on values recommended by the
specification, but often abbreviated to reduce timeouts for reliable
and/or simple network topologies. Extract the DHCP timing parameters
to config/dhcp.h and document them. The resulting default iPXE
behavior is exactly the same, but downstreams are now afforded the
opportunity to implement spec-compliant behavior via config file
overrides.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
LZMA provides significantly better compression (by ~15%) than the
current NRV2B algorithm.
We use a raw LZMA stream (aka LZMA1) to avoid the need for code to
parse the LZMA2 block headers. We use parameters {lc=2,lp=0,pb=0} to
reduce the stack space required by the decompressor to acceptable
levels (around 8kB). Using lc=3 or pb=2 would give marginally better
compression, but at the cost of substantially increasing the required
stack space.
The build process now requires the liblzma headers to be present on
the build system, since we do not include a copy of an LZMA compressor
within the iPXE source tree. The decompressor is written from scratch
(based on XZ Embedded) and is entirely self-contained within the
iPXE source.
The branch-call-jump (BCJ) filter used to improve the compressibility
is specific to iPXE. We choose not to use liblzma's built-in BCJ
filter since the algorithm is complex and undocumented. Our BCJ
filter achieves approximately the same results (on typical iPXE
binaries) with a substantially simpler algorithm.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[prefix] Use .bss16 as temporary stack space for calls to install_block
Some decompression algorithms (e.g. LZMA) require large amounts of
temporary stack space, which may not be made available by all
prefixes. Use .bss16 as a temporary stack for the duration of the
calls to install_block (switching back to the external stack before we
start making calls into code which might access variables in .bss16),
and allow the decompressor to define a global symbol to force a
minimum value on the size of .bss16.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Other hypervisors (e.g. KVM) may provide an unusable subset of the
Hyper-V features, and our attempts to use these non-existent features
cause the guest to reboot.
Fix by explicitly checking for the Hyper-V features that we use.
Reported-by: Ján ONDREJ (SAL) <ondrejj@salstar.sk>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The implementation of strtoul() has a partially unknown provenance.
Rewrite this code to avoid potential licensing uncertainty.
Since we now use -ffunction-sections, there is no need to place
strtoull() in a separate file from strtoul().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The implementation of inet_aton() has an unknown provenance. Rewrite
this code to avoid potential licensing uncertainty.
Also move the code from core/misc.c to its logical home in net/ipv4.c,
and add a few extra test cases.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When a command times out, abort it (via the Command Abort bit in the
Command Ring Control Register) so that subsequent commands may execute
as expected.
This improves robustness when a device fails to respond to the Set
Address command, since the subsequent Disable Slot command will now
succeed.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[xhci] Leak memory if controller fails to disable slot
If the Disable Slot command fails then the hardware may continue to
write to the slot context. Leak the memory used by the slot context
to avoid future memory corruption.
This situation has been observed in practice when a Set Address
command fails, causing the command ring to become temporarily
unresponsive.
Note that there is no need to similarly leak memory on the failure
path in xhci_device_open(), since in the event of a failure the
hardware is never informed of the slot context address.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[timer] Rewrite the 8254 Programmable Interval Timer support
The 8254 timer code (used to implement udelay()) has an unknown
provenance. Rewrite this code to avoid potential licensing
uncertainty.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
As with memcpy(), we can reduce the code size (by an average of 0.2%)
by giving the compiler more visibility into what memset() is doing,
and by avoiding the "rep" prefix on short fixed-length sequences of
string operations.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some of the C library string functions have an unknown provenance.
Reimplement all such functions to avoid potential licensing
uncertainty.
Remove the inline-assembler versions of strlen(), memswap(), and
strncmp(); these save a minimal amount of space (around 40 bytes in
total) and are not performance-critical.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[usb] Provide generic framework for refilling receive endpoints
Provide a generic framework for allocating, refilling, and optionally
recycling I/O buffers used by bulk IN and interrupt endpoints.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Apply the "-fno-PIE -nopie" workaround only to i386 builds
Hardened versions of gcc default to building position-independent
code, which breaks our i386 build. Our build process therefore
detects such platforms and automatically adds "-fno-PIE -nopie" to the
gcc command line.
On x86_64, we choose to build position-independent code (in order to
reduce the final binary size and, in particular, the number of
relocations required for UEFI binaries). The workaround therefore
breaks the build process for x86_64 binaries on such platforms.
Fix by moving the workaround to the i386-specific portion of the
Makefile.
Reported-by: Jan Kundrát <jkt@kde.org>
Debugged-by: Jan Kundrát <jkt@kde.org>
Debugged-by: Marin Hannache <git@mareo.fr>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
UEFI binaries may be relocated to any location within the 64-bit
address space. We compile as position-independent code with hidden
visibility, which should force all relocation records to be either
PC-relative (in which case no PE relocations are required) or full
64-bit relocations. There should be no R_X86_64_32 relocation
records, since that would imply an invalid assumption that code could
not be relocated above 4GB.
Remove support for R_X86_64_32 relocation records from util/elf2efi.c,
so that any such records result in a build failure rather than a
potential runtime failure.
Reported-by: Jan Kundrát <jkt@kde.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When building hvmloader for Xen tools the iPXE objects are also linked
into the binary. Unfortunately the linker will place them in the
order found in the archive. Since this order is random the resulting
hvmloader binary differs when it was built from identical sources but
on different build hosts. To help with creating a reproducible binary
the elements in blib.a must simply be sorted before passing them to
$(AR).
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[usb] Handle port status changes received after failing to find a driver
Commit a60f2dd ("[usb] Try multiple USB device configurations")
changed the behaviour of register_usb() such that if no drivers are
found then the device will be closed and the memory used will be
freed.
If a port status change subsequently occurs while the device is still
physically attached, then usb_hotplug() will see this as a new device
having been attached, since there is no device recorded as being
currently attached to the port. This can lead to spurious hotplug
events (or even endless loops of hotplug events, if the process of
opening and closing the device happens to generate a port status
change).
Fix by using a separate flag to indicate that a device is physically
attached (even if we have no corresponding struct usb_device).
Reported-by: Dan Ellis <Dan.Ellis@displaylink.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Use PRODUCT_SHORT_NAME for end-user visible strings
Use PRODUCT_SHORT_NAME instead of a hardcoded "iPXE" for strings which
are typically shown in the user interface.
Note that this only allows for customisation of the user interface.
Where the "iPXE" string serves a technical purpose (such as in the
HTTP User-Agent), the string cannot be customised.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[xhci] Delay after (possibly) forcing port link state to RxDetect
Some xHCI controllers (observed with a Renesas Electronics PCIe USB3
card) seem to require a delay after forcing the link state of USB3
ports to RxDetect. Omitting this delay causes strange behaviour
including system lockups.
Add an unconditional 20ms delay after writing the port link states.
This seems to be sufficient to avoid the problem.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[usb] Allow usb_stream() to enforce a terminating short packet
Some USB endpoints require that a short packet be used to terminate
transfers, since they have no other way to determine message
boundaries. If the message length happens to be an exact multiple of
the USB packet size, then this requires the use of an additional
zero-length packet.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
USB Communications Device Class devices may use a union functional
descriptor to group several interfaces into a function.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Iterate over a USB device's available configurations until we find one
for which we have working drivers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown