The build process has for a long time assumed that every ROM is a PCI
ROM, and will always include the PCI header and PCI-related
functionality (such as checking the PCI BIOS version, including the
PCI bus:dev.fn address within the ROM product name string, etc.).

While real ISA cards are no longer in use, some virtualisation
environments (notably VirtualBox) have support only for ISA ROMs.
This can cause problems: in particular, VirtualBox will call our
initialisation entry point with random garbage in %ax, which we then
treat as the PCI bus:dev.fn address of the autoboot device: this
generally prevents the default boot sequence from using any network
devices.

Create .isarom and .pcirom prefixes which can be used to explicitly
specify the type of ROM to be created.  (Note that the .mrom prefix
always implies a PCI ROM, since the .mrom mechanism relies on
reconfiguring PCI BARs.)

Make .rom a magic prefix which will automatically select the
appropriate PCI or ISA ROM prefix for ROMs defined via a PCI_ROM() or
ISA_ROM() macro.  To maintain backwards compatibility, we default to
building a PCI ROM for anything which is not directly derived from a
PCI_ROM() or ISA_ROM() macro (e.g. bin/intel.rom).

Add a selection of targets to "make everything" to ensure that the
(relatively obscure) ISA ROM build process is included within the
per-commit QA checks.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Report the cause of the failure when we are unable to open the .mrom
payload.  There are two possible failure cases:

 - Unable to find a suitable memory BAR to borrow (e.g. if the NIC
   doesn't have a memory BAR that is at least as large as the
   expansion ROM BAR, or if the memory BAR has been assigned a 64-bit
   address which won't fit into the 32-bit expansion ROM BAR).  This
   will be reported as "BABABABA".

 - Unable to find correct ROM image within the BAR.  This will be
   reported as the address (within the borrowed BAR) at which we first
   fail to find a valid 55AA signature.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>

A .mrom image currently assumes that it is the first image within the
expansion ROM BAR, which may not be correct when multiple images are
present.

Fix by scanning through the BAR until we locate an image matching our
build ID.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

The header of a .mrom image declares its length to be only a few
kilobytes; the remainder is accessed via a sideband mechanism.  This
makes it difficult to append an additional ROM image, such as an EFI
ROM.

Add a second, dummy ROM header covering the payload portion of the
.mrom image, allowing consumers to locate any appended ROM images in
the usual way.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Some binutils versions will drag in an object to satisfy the entry
symbol; some won't.  Try to cope with this exciting variety of
behaviour by ensuring that all entry symbols are unique.

Remove the explicit inclusion of the prefix object on the linker
command line, since the entry symbol now provides all the information
needed to identify the prefix.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Flat real mode works perfectly on real hardware, but seems to cause
problems for some hypervisors.  Revert to using 16-bit protected mode
(and returning to real mode with 4GB limits, so as not to break PMM
BIOSes).

Allow the code specific to the .mrom format to continue to assume that
flat real mode works, since this format is specific to real hardware.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Add an infrastructure allowing the prefix to provide an open_payload()
method for obtaining out-of-band access to the whole iPXE image.  Add
a mechanism within this infrastructure that allows raw access to the
expansion ROM BAR by temporarily borrowing an address from a suitable
memory BAR on the same PCI card.

For cards that have a memory BAR that is at least as large as their
expansion ROM BAR, this allows large iPXE ROMs to be supported even on
systems where PMM fails, or where option ROM space pressure makes it
impossible to use PMM shrinking.  The BIOS sees only a stub ROM of
approximately 3kB in size; the remainder (which can be well over 64kB)
is loaded only at the time iPXE is invoked.

As a nice side-effect, an iPXE .mrom image will continue to work even
if its PMM-allocated areas are overwritten between initialisation and
invocation.

Signed-off-by: Michael Brown <mcb30@ipxe.org>