Add preprocessor magic to the error definitions to enable every error
usage to be tracked.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Access to the gpxe.org and etherboot.org domains and associated
resources has been revoked by the registrant of the domain.  Work
around this problem by renaming project from gPXE to iPXE, and
updating URLs to match.

Also update README, LOG and COPYRIGHTS to remove obsolete information.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

Signed-off-by: Michael Brown <mcb30@etherboot.org>

Signed-off-by: Michael Brown <mcb30@etherboot.org>

IPoIB has a 20-byte link-layer address, of which only eight bytes
represent anything relating to a "hardware address".

The PXE and EFI SNP APIs expect the permanent address to be the same
size as the link-layer address, so fill in the "permanent address"
field with the initial link layer address (as generated by
register_netdev() based upon the real hardware address).

The hardware address is an intrinsic property of the hardware, while
the link-layer address can be changed at runtime.  This separation is
exposed via APIs such as PXE and EFI, but is currently elided by gPXE.

Expose the hardware and link-layer addresses as separate properties
within a net device.  Drivers should now fill in hw_addr, which will
be used to initialise ll_addr at the time of calling
register_netdev().

The minimal-surprise behaviour, when no explicit SRP initiator device
is specified, will probably be to use the most recently opened
Infiniband device.  This matches our behaviour with using the most
recently opened net device for PXE, iSCSI, AoE, NBI, etc.

Expand the NETDEV_LINK_UP bit into a link_rc status code field,
allowing specific reasons for link failure to be reported via
"ifstat".

Originally-authored-by: Joshua Oreman <oremanj@rwcr.net>

In order to construct outgoing link-layer frames or parse incoming
ones properly, some protocols (such as 802.11) need more state than is
available in the existing variables passed to the link-layer protocol
handlers. To remedy this, add struct net_device *netdev as the first
argument to each of these functions, so that more information can be
fetched from the link layer-private part of the network device.

Updated all three call sites (netdevice.c, efi_snp.c, pxe_undi.c) and
both implementations (ethernet.c, ipoib.c) of ll_protocol to use the
new argument.

Signed-off-by: Michael Brown <mcb30@etherboot.org>

This provides a mechanism for using arbitrarily-named variables within
gPXE, using the existing syntax for settings.

Add FILE_LICENCE declarations to almost all files that make up the
various standard builds of gPXE.

Suggested-by: Bill Lortz <Bill.Lortz@premier.org>

Intel's C compiler (icc) chokes on the zero-length arrays that we
currently use as part of the mechanism for accessing linker table
entries.  Abstract away the zero-length arrays, to make a port to icc
easier.

Introduce macros such as for_each_table_entry() to simplify the common
case of iterating over all entries in a linker table.

Represent table names as #defined string constants rather than
unquoted literals; this avoids visual confusion between table names
and C variable or type names, and also allows us to force a
compilation error in the event of incorrect table names.

There are currently four places within the codebase that use a
heuristic to guess the "boot network device", with varying degrees of
success.  Add a feature to the net device core to maintain a list of
open network devices, in order of opening, and provide a function
last_opened_netdev() to retrieve the most recently opened net device.
This should do a better job than the current assortment of
guess_boot_netdev() functions.

netdev_rx_err() and netdev_tx_complete_err() get passed the error
code, but currently use it only in debug messages.

Retain error numbers and frequencey counts for up to
NETDEV_MAX_UNIQUE_ERRORS (4) different errors for each of TX and RX.
This allows the "ifstat" command to report the reasons for TX/RX
errors in most cases, even in non-debug builds.

Settings can be constructed using a dotted-decimal notation, to allow
for access to unnamed settings.  The default interpretation is as a
DHCP option number (with encapsulated options represented as
"<encapsulating option>.<encapsulated option>".

In several contexts (e.g. SMBIOS, Phantom CLP), it is useful to
interpret the dotted-decimal notation as referring to non-DHCP
options.  In this case, it becomes necessary for these contexts to
ignore standard DHCP options, otherwise we end up trying to, for
example, retrieve the boot filename from SMBIOS.

Allow settings blocks to specify a "tag magic".  When dotted-decimal
notation is used to construct a setting, the tag magic value of the
originating settings block will be ORed in to the tag number.
Store/fetch methods can then check for the magic number before
interpreting arbitrarily-numbered settings.

EFI requires us to be able to specify the source address for
individual transmitted packets, and to be able to extract the
destination address on received packets.

Take advantage of this to rationalise the push() and pull() methods so
that push() takes a (dest,source,proto) tuple and pull() returns a
(dest,source,proto) tuple.

Determine the network-layer packet type and fill it in for UNDI
clients.  This is required by some NBPs such as emBoot's winBoot/i.

This change requires refactoring the link-layer portions of the
gPXE netdevice API, so that it becomes possible to strip the
link-layer header without passing the packet up the network stack.

Add a configuration settings block for each net device.  This will
provide the parent scope for settings applicable only to that network
device (e.g. non-volatile options stored on the NIC, options obtained via
DHCP, etc.).

Expose the MAC address as a setting.

packet, to work around the problem whereby small TX rings get backed
up because we haven't yet poll()ed for TX completions.

packet, to work around the problem whereby small TX rings get backed
up because we haven't yet poll()ed for TX completions.

safe dropping of the netdev ref by the driver while other refs still
exist.

Add netdev_irq() method.  Net device open()/close() methods should no
longer enable or disable IRQs.

Remove rx_quota; it wasn't used anywhere and added too much complexity
to implementing correct interrupt-masking behaviour in pxe_undi.c.

permanent processes, rather than requiring each one to have its own
initialisation function.

via UNDI API and also by ifstat command; may be useful for debugging.

structures.

DHCP still broken and #if 0'd out.

Add reference-counting to processes.

Add timer_running() test.

Achieved via Perl using:

perl -pi -e 's/pk_buff/io_buffer/g; s/Packet buffer/I\/O buffer/ig; ' \
	-e 's/pkbuff\.h/iobuf.h/g; s/pkb_/iob_/g; s/_pkb/_iob/g; ' \
	-e 's/pkb/iobuf/g; s/PKB/IOB/g;'

ISA 3c509 is currently non-functional, although the EISA (3c509-eisa) and
MCA (3c529) variants should build OK.

None of this code is yet tested.

to avoid drops even on slow NICs.

needed now that performance is up.

almost everywhere else.

names.

Add "dev" pointer in struct net_device to tie network interfaces back to a
hardware device.

Force natural alignment of data types in __table() macros.  This seems to
prevent gcc from taking the unilateral decision to occasionally increase
their alignment (which screws up the table packing).

of alloc_pkb() exhaustion when e.g. an iSCSI-booted DOS session is left
idle for a long time at the C:\ prompt and builds up a huge packet
backlog.

(which will need us to wait for TX completions).

Added debug autocolourisation to netdevice.c

Call netdevice's poll() and transmit() methods only when device is open.

net_device is unregistered.

defined in vsprintf.h.  (This may change, since vsprintf.h is a
non-standard name, but for now it's the one to use.)

There should be no need to include vsprintf.h just for DBG() statements,
since include/compiler.h forces it in for a debug build anyway.