[bios] Make uses of REAL_CODE() and PHYS_CODE() 64-bit clean
On a 64-bit CPU, any modification of a register by 32-bit or 16-bit
code will destroy the invisible upper 32 bits of the corresponding
64-bit register. For example: a 32-bit "pushl %eax" followed by a
"popl %eax" will zero the upper half of %rax. This differs from the
treatment of upper halves of 32-bit registers by 16-bit code: a
"pushw %ax" followed by a "popw %ax" will leave the upper 16 bits of
%eax unmodified.
Inline assembly generated using REAL_CODE() or PHYS_CODE() will
therefore have to preserve the upper halves of all registers, to avoid
clobbering registers that gcc expects to be preserved.
Output operands from REAL_CODE() and PHYS_CODE() assembly may
therefore contain undefined values in the upper 32 bits.
Fix by using explicit variable widths (e.g. uint32_t) for
non-discarded output operands, to ensure that undefined values in the
upper 32 bits of 64-bit registers are ignored.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Move most arch/i386 files to arch/x86, and adjust the contents of the
Makefiles and the include/bits/*.h headers to reflect the new
locations.
This patch makes no substantive code changes, as can be seen using a
rename-aware diff (e.g. "git show -M5").
This patch does not make the pcbios platform functional for x86_64; it
merely allows it to compile without errors.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[prefix] Pad .text16 and .data16 segment sizes at build time
Commit c64747d ("[librm] Speed up real-to-protected mode transition
under KVM") rounded down the .text16 segment address calculated in
alloc_basemem() to a multiple of 64 bytes in order to speed up mode
transitions under KVM.
This creates a potential discrepancy between alloc_basemem() and
free_basemem(), meaning that free_basemem() may free less memory than
was allocated by alloc_basemem().
Fix by padding the calculated sizes of both .text16 and .data16 to a
multiple of 64 bytes at build time.
Debugged-by: Yossef Efraim <yossefe@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[iobuf] Improve robustness of I/O buffer allocation
Guard against various corner cases (such as zero-length buffers, zero
alignments, and integer overflow when rounding up allocation lengths
and alignments) and ensure that the struct io_buffer is correctly
aligned even when the caller requests a non-zero alignment for the I/O
buffer itself.
Add self-tests to verify that the resulting alignments and lengths are
correct for a range of allocations.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit f3fbb5f ("[malloc] Avoid integer overflow for excessively large
memory allocations") fixed signed integer overflow issues caused by
the use of ssize_t, but did not guard against unsigned integer
overflow.
Add explicit checks for unsigned integer overflow where needed. As a
side bonus, erroneous calls to malloc_dma() with an (illegal) size of
zero will now fail cleanly.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
ath_rx_init() demonstrates some serious confusion over how to use
pointers, resulting in (uint32_t*)NULL being used as a temporary
variable. This does not end well.
The broken code in question is performing manual alignment of I/O
buffers, which can now be achieved more simply using alloc_iob_raw().
Fix by removing ath_rxbuf_alloc() entirely.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The various early-exit paths in parse_uri() accidentally bypass the
URI field decoding. The result is that opaque or relative URIs do not
undergo URI field decoding, resulting in double-encoding when the URIs
are subsequently used. For example:
#!ipxe
set mac ${macstring}
imgfetch /boot/by-mac/${mac:uristring}
would result in an HTTP GET such as
GET /boot/by-mac/00%253A0c%253A29%253Ac5%253A39%253Aa1 HTTP/1.1
rather than the expected
GET /boot/by-mac/00%3A0c%3A29%3Ac5%3A39%3Aa1 HTTP/1.1
Fix by ensuring that URI decoding is always applied regardless of the
URI format.
Reported-by: Andrew Widdersheim <awiddersheim@inetu.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
TFTP URIs are intrinsically problematic, since:
- TFTP servers may use either normal slashes or backslashes as a
directory separator,
- TFTP servers allow filenames to be specified using relative paths
(with no initial directory separator),
- TFTP filenames present in a DHCP filename field may use special
characters such as "?" or "#" that prevent parsing as a generic URI.
As of commit 7667536 ("[uri] Refactor URI parsing and formatting"), we
have directly constructed TFTP URIs from DHCP next-server and filename
pairs, avoiding the generic URI parser. This eliminated the problems
related to special characters, but indirectly made it impossible to
parse a "tftp://..." URI string into a TFTP URI with a non-absolute
path.
Re-introduce the convention of requiring an extra slash in a
"tftp://..." URI string in order to specify a TFTP URI with an initial
slash in the filename. For example:
tftp://192.168.0.1/boot/pxelinux.0 => RRQ "boot/pxelinux.0"
tftp://192.168.0.1//boot/pxelinux.0 => RRQ "/boot/pxelinux.0"
This is ugly, but there seems to be no other sensible way to provide
the ability to specify all possible TFTP filenames.
A side-effect of this change is that format_uri() will no longer add a
spurious initial "/" when formatting a relative URI string. This
improves the console output when fetching an image specified via a
relative URI.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[ocsp] Avoid including a double path separator in request URI
The OCSP responder URI included within an X.509 certificate may or may
not include a trailing slash. We currently rely on the fact that
format_uri() incorrectly inserts an initial slash, which we include
unconditionally within the OCSP request URI.
Switch to using uri_encode() directly, and insert a slash only if the
X.509 certificate's OCSP responder URI does not already include a
trailing slash.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 53d2d9e ("[uri] Generalise tftp_uri() to pxe_uri()") introduced
a regression in which an NFS root path would no longer be treated as
an unsupported root path, causing a boot with an NFS root path to fail
with a "Could not open SAN device" error.
Reported-by: David Evans <dave.evans55@googlemail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some protocols (such as ARP) may modify the received packet and re-use
the same I/O buffer for transmission of a reply. The SMSC95XX
transmit header is larger than the receive header: the re-used I/O
buffer therefore does not have sufficient headroom for the transmit
header, and the ARP reply will therefore fail to be transmitted. This
is essentially the same problem as in commit 2e72d10 ("[ncm] Reserve
headroom in received packets").
Fix by reserving sufficient space at the start of each received packet
to allow for the difference between the lengths of the transmit and
receive headers.
This problem is not caught by the current driver development test
suite (documented at http://ipxe.org/dev/driver), since even the large
file transfer tests tend to completely sufficiently quickly that there
is no need for the server to ever send an ARP request. The failure
shows up only when using a very slow protocol such as RFC7440-enhanced
TFTP (as used by Windows Deployment Services).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The LED pins are configured by default as GPIO inputs. While it is
conceivable that a board might actually use these pins as GPIOs, no
such board is known to exist.
The Linux smsc95xx driver configures these pins unconditionally as LED
outputs. Assume that it is safe to do likewise.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Expose the network interface name (e.g. "net0") as a setting. This
allows a script to obtain the name of the most recently opened network
interface via ${netX/ifname}.
Signed-off-by: Andrew Widdersheim <amwiddersheim@gmail.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Add named configuration for public cloud environments
Add a named CONFIG=cloud configuration, which enables console types
useful for obtaining output from virtual machines in public clouds
such as AWS EC2.
An image suitable for use in AWS EC2 can be built using
make bin/ipxe.usb CONFIG=cloud EMBED=config/cloud/aws.ipxe
The embedded script will direct iPXE to download and execute the EC2
"user-data" file, which is always available to an EC2 VM via the URI
http://169.254.169.254/latest/user-data (regardless of the VPC
networking settings). The boot can therefore be controlled by
modifying the per-instance user data, without having to modify the
boot disk image.
Console output can be obtained via syslog (with a syslog server
configured in the user-data script), via the AWS "System Log" (after
the instance has been stopped), or as a last resort from the log
partition on the boot disk.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The three nominally-disambiguated ENOTSUP errors accidentally all used
the same error disambiguator, rendering them identical. Fix by
changing all three values. We avoid reusing the 0x01 disambiguator
value, since that remains ambiguous in older binaries.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some BIOS console redirection capabilities do not work well with the
colourised debug messages used by iPXE. We already allow the range of
colours to be controlled via the DBGCOL=... build parameter. Extend
this syntax to allow DBGCOL=0 to be used to mean "disable colours".
Requested-by: Wissam Shoukair <wissams@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide a debug function check_bios_interrupts() to look for changes
to the interrupt vector table. This can be useful when investigating
the behaviour (including crashes) of external PXE NBPs.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tftp] Do not change current working URI when TFTP server is cleared
For historical reasons, iPXE sets the current working URI to the root
of the TFTP server whenever the TFTP server address is changed. This
was originally implemented in the hope of allowing a DHCP-provided
TFTP filename to be treated simply as a relative URI. This usage
turns out to be impractical since DHCP-provided TFTP filenames may
include characters which would have special significance to the URI
parser, and so the DHCP next-server+filename combination is now
handled by the dedicated pxe_uri() function instead.
The practice of setting the current working URI to the root of the
TFTP server is potentially helpful for interactive uses of iPXE,
allowing a user to type e.g.
iPXE> dhcp
Configuring (net0 52:54:00:12:34:56)... ok
iPXE> chain pxelinux.0
and have the URI "pxelinux.0" interpreted as being relative to the
root of the TFTP server provided via DHCP.
The current implementation of tftp_apply_settings() has an unintended
flaw. When the "dhcp" command is used to renew a DHCP lease (or to
pick up potentially modified DHCP options), the old settings block
will be unregistered before the new settings block is registered.
This causes tftp_apply_settings() to believe that the TFTP server has
been changed twice (to 0.0.0.0 and back again), and so the current
working URI will always be set to the root of the TFTP server, even if
the DHCP response provides exactly the same TFTP server as previously.
Fix by doing nothing in tftp_apply_settings() whenever there is no
TFTP server address.
Debugged-by: Andrew Widdersheim <awiddersheim@inetu.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[downloader] Update image URI in response to a redirection
Update the image's recorded URI when a download redirection occurs.
This ensures that URIs relative to a redirected download are resolved
correctly.
In particular, this allows for the use of relative URIs in scripts
that are themselves downloaded via a redirection, such as the HTTP 301
redirection used to fix up URIs pointing to directories but omitting
the trailing slash (e.g. "http://boot.ipxe.org/demo", which will be
redirected to "http://boot.ipxe.org/demo/").
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Resolve redirection URIs as being relative to the original HTTP
request URI, rather than treating them as being implicitly relative to
the current working URI.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown