[undi] Include subsystem IDs in broken interrupt device check
Allow the subsystem IDs to be used when checking for PXE stacks with
broken interrupt support.
Suggested-by: Levi Hsieh <Levi.Hsieh@dell.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[librm] Ensure that inline code symbols are unique
Commit 6149e0a ("[librm] Provide symbols for inline code placed into
other sections") may cause build failures due to duplicate label names
if the compiler chooses to duplicate inline assembly code.
Fix by using the "%=" special format string to include a
guaranteed-unique number within the label name.
The "%=" will be expanded only if constraints exist for the inline
assembly. This fix therefore requires that all REAL_CODE() fragments
use a (possibly empty) constraint list.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[librm] Provide symbols for inline code placed into other sections
Provide symbols constructed from the object name and line number for
code fragments placed into alternative sections, such as inline
REAL_CODE() assembly placed into .text16. This simplifies the
debugging task of finding the source code corresponding to a given
instruction pointer.
Note that we cannot use __FUNCTION__ since it is not a preprocessor
macro and so cannot be concatenated with string literals.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[undi] Treat invalid IRQ numbers as non-fatal errors
If the underlying PXE stack reports an invalid IRQ number (above
IRQ_MAX), treat this as equivalent to an empty IRQ number and fall
back to using polling mode.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The existence of MMX and SSE is required by the System V x86_64 ABI
and so is assumed by gcc, but these registers are not preserved by our
own interrupt handlers and are unlikely to be preserved by other
context switch handlers in a boot firmware environment.
Explicitly prevent gcc from using MMX or SSE registers to avoid
potential problems due to silent register corruption.
We must remove the %xmm0-%xmm5 clobbers from the x86_64 version of
hv_call() since otherwise gcc will complain about unknown register
names. Theoretically, we should probably add code to explicitly
preserve the %xmm0-%xmm5 registers across a hypercall, in order to
guarantee to external code that these registers remain unchanged. In
practice this is difficult since SSE registers are disabled by
default: for background information see commits 71560d1 ("[librm]
Preserve FPU, MMX and SSE state across calls to virt_call()") and
dd9a14d ("[librm] Conditionalize the workaround for the Tivoli VMM's
SSE garbling").
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[rng] Use fixed-point calculations for min-entropy quantities
We currently perform various min-entropy calculations using build-time
floating-point arithmetic. No floating-point code ends up in the
final binary, since the results are eventually converted to integers
and asserted to be compile-time constants.
Though this mechanism is undoubtedly cute, it inhibits us from using
"-mno-sse" to prevent the use of SSE registers by the compiler.
Fix by using fixed-point arithmetic instead.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[time] Add support for the ACPI power management timer
Allow the ACPI power management timer to be used if enabled via
TIMER_ACPI in config/timer.h. This provides an alternative timer on
systems where the standard 8254 PIT is unavailable or unreliable.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[librm] Add facility to provide register and stack dump for CPU exceptions
When DEBUG=librm_mgmt is enabled, intercept CPU exceptions and provide
a register and stack dump, then drop to an emergency shell. Exiting
from the shell will almost certainly not work, but this provides an
opportunity to view the register and stack dump and carry out some
basic debugging.
Note that we can intercept only the first 8 CPU exceptions, since a
PXE ROM is not permitted to rebase the PIC.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Using "ld --oformat binary" for mbr.bin and usbdisk.bin seems to cause
segmentation faults on some versions of binutils (observed on Fedora
27). Work around this problem by using ld to create an intermediate
ELF object, followed by objcopy (via the existing %.tmp -> %.bin rule)
to create the final binary.
Note that we cannot simply use a single-stage "objcopy -O binary"
since this will not process the relocation records for x86_64: see
commit 1afcccd ("[build] Do not use "objcopy -O binary" for objects
with relocation records").
Reported-by: Brent S <bts@square-r00t.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add missing FILE_LICENCE declarations to x86_64 headers based on the
corresponding i386 headers (from which the x86_64 headers were
originally derived).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[romprefix] Avoid unaligned accesses within ROM headers
Ensure that all headers (PCI, UNDI, PnP, iPXE) are aligned to at least
four bytes, so that all accesses to header fields will be correctly
aligned even when reading directly from the expansion ROM BAR.
Reported-by: Peter von Konigsmark <peter@exablaze.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[hyperv] Do not steal ownership from the Gen 2 UEFI firmware
We must not steal ownership from the Gen 2 UEFI firmware, since doing
so will cause an immediate system crash (most likely in the form of a
reboot).
This problem was masked before commit a0f6e75 ("[hyperv] Do not fail
if guest OS ID MSR is already set"), since prior to that commit we
would always fail if we found any non-zero guest OS identity. We now
accept a non-zero previous guest OS identity in order to allow for
situations such as chainloading from iPXE to another iPXE, and as a
prerequisite for commit b91cc98 ("[hyperv] Cope with Windows Server
2016 enlightenments").
A proper fix would be to reverse engineer the UEFI protocols exposed
within the Hyper-V Gen 2 firmware and use these to bind to the VMBus
device representing the network connection, (with the native Hyper-V
driver moved to become a BIOS-only feature).
As an interim solution, fail to initialise the native Hyper-V driver
if we detect the guest OS identity known to be used by the Gen 2 UEFI
firmware. This will cause the standard all-drivers build (ipxe.efi)
to fall back to using the SNP driver.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Fix ARM32 EFI builds with current EDK2 headers
EDK2 commit 6440385 ("MdePkg/Include: Add enumeration size checks to
Base.h") enforced the UEFI specification mandate that enums should
always be 32 bits. This revealed a latent bug in iPXE, which does not
build with -fno-short-enums.
Fix by adding -fno-short-enums to CFLAGS for ARM32 EFI builds.
Reported-by: Benjamin S. Allen <bsallen@alcf.anl.gov>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Conditionalise use of -mabi=lp64 for ARM64 builds
The -mabi option was added in GCC 4.9. Test for the existence of this
option to allow for building with earlier versions of GCC.
Reported-by: Benjamin S. Allen <bsallen@alcf.anl.gov>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
For some CPUID leaves (e.g. %eax=0x00000004), the result depends on
the input value of %ecx. Allow this subfunction number to be
specified as a parameter to the cpuid() wrapper.
The subfunction number is exposed via the ${cpuid/...} settings
mechanism using the syntax
${cpuid/<subfunction>.0x40.<register>.<function>}
e.g.
${cpuid/0.0x40.0.0x0000000b}
${cpuid/1.0x40.0.0x0000000b}
to retrieve the CPU topology information.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some distributions patch gcc to generate position independent
executables by default. We currently include a workaround to check
for this and to add -fno-PIE -nopie to CFLAGS if required.
Newer patched versions of gcc require -fno-PIE -no-pie instead. Check
for both variants.
Reported-by: Nathan Rennie-Waldock <nathan.renniewaldock@gmail.com>
Originally-fixed-by: Markos Chandras <mchandras@suse.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[hdprefix] Avoid attempts to read beyond the end of the disk
When booting from a hard disk image (e.g. bin/ipxe.usb) within an
emulator such as QEMU, the disk may not exist beyond the end of the
image. Limit all reads to the length of the image to avoid spurious
errors when loading the iPXE image.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[hyperv] Cope with Windows Server 2016 enlightenments
An "enlightened" external bootloader (such as Windows Server 2016's
winload.exe) may take ownership of the Hyper-V connection before all
INT 13 operations have been completed. When this happens, all VMBus
devices are implicitly closed and we are left with a non-functional
network connection.
Detect when our Hyper-V connection has been lost (by checking the
SynIC message page MSR). Reclaim ownership of the Hyper-V connection
and reestablish any VMBus devices, without disrupting any existing
iPXE state (such as IPv4 settings attached to the network device).
Windows Server 2016 will not cleanly take ownership of an active
Hyper-V connection. Experimentation shows that we can quiesce by
resetting only the SynIC message page MSR; this results in a
successful SAN boot (on a Windows 2012 R2 physical host). Choose to
quiesce by resetting (almost) all MSRs, in the hope that this will be
more robust against corner cases such as a stray synthetic interrupt
occurring during the handover.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[block] Allow use of a non-default EFI SAN boot filename
Some older operating systems (e.g. RHEL6) use a non-default filename
on the root disk and rely on setting an EFI variable to point to the
bootloader. This does not work when performing a SAN boot on a
machine where the EFI variable is not present.
Fix by allowing a non-default filename to be specified via the
"sanboot --filename" option or the "san-filename" setting. For
example:
sanboot --filename \efi\redhat\grub.efi \
iscsi:192.168.0.1::::iqn.2010-04.org.ipxe.demo:rhel6
or
option ipxe.san-filename code 188 = string;
option ipxe.san-filename "\\efi\\redhat\\grub.efi";
option root-path "iscsi:192.168.0.1::::iqn.2010-04.org.ipxe.demo:rhel6";
Originally-implemented-by: Vishvananda Ishaya Abrams <vish.ishaya@oracle.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Describe all SAN devices via ACPI tables such as the iBFT. For tables
that can describe only a single device (i.e. the aBFT and sBFT), one
table is installed per device. For multi-device tables (i.e. the
iBFT), all devices are described in a single table.
An underlying SAN device connection may be closed at the time that we
need to construct an ACPI table. We therefore introduce the concept
of an "ACPI descriptor" which enables the SAN boot code to maintain an
opaque pointer to the underlying object, and an "ACPI model" which can
build tables from a list of such descriptors. This separates the
lifecycles of ACPI descriptions from the lifecycles of the block
device interfaces, and allows for construction of the ACPI tables even
if the block device interface has been closed.
For a multipath SAN device, iPXE will wait until sufficient
information is available to describe all devices but will not wait for
all paths to connect successfully. For example: with a multipath
iSCSI boot iPXE will wait until at least one path has become available
and name resolution has completed on all other paths. We do this
since the iBFT has to include IP addresses rather than DNS names. We
will commence booting without waiting for the inactive paths to either
become available or close; this avoids unnecessary boot delays.
Note that the Linux kernel will refuse to accept an iBFT with more
than two NIC or target structures. We therefore describe only the
NICs that are actually required in order to reach the described
targets. Any iBFT with at most two targets is therefore guaranteed to
describe at most two NICs.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[int13con] Avoid overwriting random portions of SAN boot disks
The INT13 console type (CONSOLE_INT13) autodetects at initialisation
time a magic partition to be used for logging iPXE console output. If
the INT13 drive number mapping is subsequently changed (e.g. because
iPXE was used to perform a SAN boot), then the console logging output
will be written to the incorrect disk.
Fix by recording the INT13 vector at initialisation time, and using
this original vector to emulate INT13 calls for all subsequent
accesses. This should be robust against drive remapping performed
either by ourselves or by another bootloader (e.g. a chainloaded
undionly.kpxe which then performs a SAN boot).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[int13] Improve geometry guessing for unaligned partitions
Some partition tables have partitions that are not aligned to a
cylinder boundary, which confuses the current geometry guessing logic.
Enhance the existing logic to ensure that we never reduce our guesses
for the number of heads or sectors per track, and add extra logic to
calculate the exact number of sectors per track if we find a partition
that starts within cylinder zero.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add basic support for multipath block devices. The "sanboot" and
"sanhook" commands now accept a list of SAN URIs. We open all URIs
concurrently. The first connection to become available for issuing
block device commands is marked as the active path and used for all
subsequent commands; all other connections are then closed. Whenever
the active path fails, we reopen all URIs and repeat the process.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
As of commit 10d19bd ("[pxe] Always retrieve cached DHCPACK and apply
to relevant network device"), the UNDI driver has been the only user
of pxeparent_call(). Remove the unnecessary layer of abstraction by
refactoring this code back into undinet.c, and fix the ability of
undiisr.S to fall back to chaining to the original handler if we were
unable to unhook our own ISR.
This effectively reverts commit 337e1ed ("[pxe] Separate parent PXE
API caller from UNDINET driver").
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The concept of the SAN drive number is meaningful only in a BIOS
environment, where it represents the INT13 drive number (0x80 for the
first hard disk). We retain this concept in a UEFI environment to
allow for a simple way for iPXE commands to refer to SAN drives.
Centralise the concept of the default drive number, since it is shared
between all supported environments.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[int13] Test correct return status from INT 13 calls
INT 13 calls return a status value via %ah, with CF set if %ah is
non-zero (indicating an error). Our wrappers zero the whole of %ax if
CF is clear, to allow C code (which has no easy access to CF) to
simply test for a non-zero status to detect an error.
The current code assigns the returned status to a uint8_t, effectively
testing %al rather than %ah. Fix by treating the returned status as a
uint16_t instead.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Avoid using a zero sector count to guess the disk geometry, since that
would result in a division by zero when calculating the number of
cylinders.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[hyperv] Provide timer based on the 10MHz time reference count MSR
When running on AMD platforms, the legacy hardware emulation is
extremely unreliable. In particular, the IRQ0 timer interrupt is
likely to simply stop working, resulting in a total failure of any
code that relies on timers (such as DHCP retransmission attempts).
Work around this by using the 10MHz time counter provided by Hyper-V
via an MSR. (This timer can be tested in KVM via the command-line
option "-cpu host,hv_time".)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow the active timer (providing udelay() and currticks()) to be
selected at runtime based on probing during the INIT_EARLY stage of
initialisation.
TICKS_PER_SEC is now a fixed compile-time constant for all builds, and
is independent of the underlying clock tick rate. We choose the value
1024 to allow multiplications and divisions on seconds to be converted
to bit shifts.
TICKS_PER_MS is defined as 1, allowing multiplications and divisions
on milliseconds to be omitted entirely. The 2% inaccuracy in this
definition is negligible when using the standard BIOS timer (running
at around 18.2Hz).
TIMER_RDTSC now checks for a constant TSC before claiming to be a
usable timer. (This timer can be tested in KVM via the command-line
option "-cpu host,+invtsc".)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This code largely inspired by tap.c. Allows for testing iPXE on real
NICs from within Linux. For example:
make bin-x86_64-linux/af_packet.linux
valgrind ./bin-x86_64-linux/af_packet.linux --net af_packet,if=eth3
Tested as x86_64 and i386 binary.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[undi] Try matching UNDI ROMs in BIOS enumeration order
When searching for an UNDI ROM to match against a PCI device, search
in order of increasing ROM address (within the 128kB BIOS option ROM
area). This is likely (though not guaranteed) to match the order of
the original enumeration performed by the BIOS, which is in turn
likely to match the order of enumeration on the PCI bus.
Since we load at most one UNDI ROM, the net result is that we increase
our chances of loading the ROM corresponding to the selected PCI
device (rather than loading a ROM corresponding to a higher-numbered
PCI device with the same vendor and device IDs.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "progress" macro can be used only from within the .prefix section.
At the point of calling relocate(), we are running in .text16 and so
the near call to print_message() will end up calling a random function
somewhere in .text16.
Interestingly, this problem has remained unnoticed for some time. It
is rare to build with DEBUG=libprefix. In the few cases that it has
been used during development, the randomly selected function in
.text16 seems to have been a harmless no-op with no visible
side-effects (beyond the unnoticed failure to print the "relocate"
progress message).
Fix by removing the futile attempt to print a progress message before
calling relocate().
Reported-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[undi] Clean up driver and device name information
Fix the <NULL> driver name reported by "ifstat" when using the undipci
driver (due to the unnecessary extra device node inserted as a child
of the PCI device).
Remove the "UNDI-" prefix from device names since the driver name is
also now visible via "ifstat", and tidy up the device name to match
the format used by standard PCI devices.
The output from "ifstat" now resembles:
iPXE> ifstat
net0: 52:54:00:12:34:56 using undipci on 0000:00:03.0
iPXE> ifstat
net0: 52:54:00:12:34:56 using undionly on 0000:00:03.0
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[romprefix] Avoid using PMM-allocated memory in UNDI loader entry point
The UNDI loader entry point is very likely to be called after POST,
when there is a high chance that the PMM-allocated image source area
and decompression area have been reused by something else.
In particular, using an iPXE .iso to test a separate iPXE ROM's UNDI
loader entry point in a qemu VM is likely to crash. SeaBIOS allocates
PMM blocks from close to the top of memory and so these blocks have a
high chance of colliding with the runtime addresses subsequently
chosen by the non-ROM iPXE by scanning the INT 15,e820 memory map.
The standard romprefix.S has no choice about relying on the
PMM-allocated image source area, since it has no other way to retrieve
its compressed payload.
In mromprefix.S, the image source area functions only as an optional
buffer used to avoid repeated reads from the (potentially slow)
expansion ROM BAR by the decompression code. We can therefore always
set %esi=0 when calling install_prealloc from the UNDI loader entry
point, and simply fall back to reading directly from the expansion ROM
BAR.
We can always set %edi=0 when calling install_prealloc from the UNDI
loader entry point. This will behave as though the decompression area
PMM allocation failed, and will therefore use INT 15,88 to find a
temporary decompression area somewhere close to 64MB. This is by no
means guaranteed to be safe from collisions, but it's probably safer
on balance than the PMM-allocated address.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[undi] Allocate base memory before calling UNDI loader entry point
Allocate base memory (by decreasing the free base memory counter)
before calling the UNDI loader entry point, to minimise surprises for
the UNDI loader code.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[librm] Conditionalize the workaround for the Tivoli VMM's SSE garbling
Commit 71560d1 ("[librm] Preserve FPU, MMX and SSE state across calls
to virt_call()") added FXSAVE and FXRSTOR instructions to iPXE. In
KVM virtual machines, these instructions execute fine as long as the
host CPU supports the "unrestricted_guest" feature (that is, it can
virtualize big real mode natively). On older host CPUs however, KVM
has to emulate big real mode, and it currently doesn't implement
FXSAVE emulation.
Upstream QEMU rebuilt iPXE at commit 0418631 ("[thunderx] Fix
compilation with older versions of gcc") which is a descendant of
commit 71560d1 (see above).
This was done in QEMU commit ffdc5a2 ("ipxe: update submodule from
4e03af8ec to 041863191"). The resultant binaries were bundled with
the QEMU v2.7.0 release; see QEMU commit c52125a ("ipxe: update
prebuilt binaries").
This distributed the iPXE workaround for the Tivoli VMM bug to a
number of KVM users with old host CPUs, causing KVM emulation failures
(guest crashes) for them while netbooting.
Make the FXSAVE and FXRSTOR instructions conditional on a new feature
test macro called TIVOLI_VMM_WORKAROUND. Define the macro by default.
There is prior art for an assembly file including config/general.h:
see arch/x86/prefix/romprefix.S. Also, TIVOLI_VMM_WORKAROUND seems to
be a good fit for the "Obscure configuration options" section in
config/general.h.
Cc: Bandan Das <bsd@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Greg <rollenwiese@yahoo.com>
Cc: Michael Brown <mcb30@ipxe.org>
Cc: Michael Prokop <launchpad@michael-prokop.at>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Pickford <arch@netremedies.ca>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Ref: https://bugs.archlinux.org/task/50778
Ref: https://bugs.launchpad.net/qemu/+bug/1623276
Ref: https://bugzilla.proxmox.com/show_bug.cgi?id=1182
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1356762
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The initrd_addr_max field represents the highest byte address that may
be used to hold initrd images, and is therefore almost certainly not
aligned to a page boundary: a typical value might be 0x7fffffff.
Fix the address calculations to ensure that the initrd images are
always aligned to a page boundary.
Reported-by: Sitsofe Wheeler <sitsofe@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[acpi] Allow time for ACPI power off to take effect
The ACPI power off sequence may not take effect immediately. Delay
for one second, to eliminate potentially confusing log messages such
as "Could not power off: Error 0x43902001 (http://ipx".
Reported-by: Leonid Vasetsky <leonidv@velostrata.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown