[i386] Use memory address constraints in __bswap_16s() and __bswap_64s()
Minimise code size by forcing the use of memory addresses for
__bswap_16s() and __bswap_64s(). (__bswap_32s() cannot avoid loading the
value into a register.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Fix a strict-aliasing error on certain versions of gcc.
Reported-by: Marko Myllynen <myllynen@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Replace SHA-1 implementation from AXTLS with a dedicated iPXE
implementation which is around 40% smaller. This implementation has
been verified using the existing SHA-1 self-tests (including the NIST
SHA-1 test vectors).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[i386] Optimise byte-swapping functions and provide __bswap_{16,32,64}s()
Use the "bswap" instruction to shrink the size of byte-swapping code,
and provide the in-place variants __bswap_{16,32,64}s.
"bswap" is available only on 486 and later processors. (We already
assume the presence of "cpuid" and "rdtsc", which are available only
on Pentium and later processors.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Advertise support for TLS version 1.1, and be prepared to downgrade to
TLS version 1.0. Tested against Apache with mod_gnutls, using the
GnuTLSPriorities directive to force specific protocol versions.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow packet transmission to be deferred pending successful ARP
resolution. This avoids the time spent waiting for a higher-level
protocol (e.g. TCP or TFTP) to attempt retransmission.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[undi] Allow underlying PXE stack to construct link-layer header
Some PXE stacks (observed with a QLogic 8242) will always try to
prepend a link-layer header, even if the caller uses P_UNKNOWN to
indicate that the link-layer header has already been filled in. This
results in an invalid packet being transmitted.
Work around these faulty PXE stacks where possible by stripping the
existing link-layer header and allowing the PXE stack to (re)construct
the link-layer header itself.
Originally-fixed-by: Buck Huppmann <buckh@pobox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[iscsi] Send any padding inline with the data segment
Some iSCSI targets respond to a PDU before receiving the padding
bytes. If the target responds quickly enough, this can cause iPXE to
start processing a new TX PDU before the padding bytes have been sent,
which results in a protocol violation.
Fix by always transmitting the padding bytes along with the data
segment.
Originally-fixed-by: Shyam Iyer <shyam_iyer@dell.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
As RFC 2616 10.3.4 explains, a 303 status is the proper HTTP 1.1
behavior for what most HTTP 1.0 clients did with code 302.
Signed-off-by: Jason Lunz <lunz@acm.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[syslog] Separate out generic line-based console functionality
Abstract out the generic line-handling portions of the syslog
putchar() routine, to allow use by other console types.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[syslog] Disable console when no syslog server is defined
Explicitly disable the syslog console when no syslog server is
defined, rather than (ab)using the socket family address as an
equivalent console-enabled flag.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Separate out the core HTTP functionality (which is shared by both HTTP
and HTTPS) from the provision of the "http://" URI opener. This
allows for builds that support only "https://" URIs.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The RTC-based entropy source uses the nanosecond-scale CPU TSC to
measure the time between two 1kHz interrupts generated by the CMOS
RTC. In a physical machine these clocks are driven from independent
crystals, resulting in some observable clock drift. In a virtual
machine, the CMOS RTC is typically emulated using host-OS
constructions such as SIGALRM.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Separate out the list of self-tests from the self-test infrastructure.
This allows tests to be run individually. For example:
make bin/sha1_test.iso
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[rng] Add get_random_nz() function required by RSA algorithm
RSA requires the generation of random non-zero bytes (i.e. a sequence
of random numbers in the range [0x01,0xff]). ANS X9.82 provides
various Approved methods for converting random bits into random
numbers. The simplest such method is the Simple Discard Method.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
ANS X9.82 specifies that the start-up tests shall consist of at least
one full cycle of the continuous tests.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[rng] Add ANS X9.82 Approved Source of Entropy Input
ANS X9.82 specifies several Approved Sources of Entropy Input (SEI).
One such SEI uses an entropy source as the Source of Entropy Input,
condensing each entropy source output after each GetEntropy call.
This can be implemented relatively cheaply in iPXE and avoids the need
to allocate potentially very large buffers.
(Note that the terms "entropy source" and "Source of Entropy Input"
are not synonyms within the context of ANS X9.82.)
Use the iPXE API mechanism to allow entropy sources to be selected at
compilation time.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Treat an empty (zeroed) DRBG as invalid. This ensures that a DRBG
that has not yet been instantiated (or that has been uninstantiated)
will refuse to attempt to generate random bits.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
NIST provides a set of known-answer tests for the Hash_DRBG algorithm,
which includes known answers for the derivation function Hash_df used
as part of Hash_DRBG. Hash_DRBG is not an Approved algorithm for ANS
X9.82, but the known answers for Hash_df (which is part of ANS X9.82)
can still be used as part of the conformance testing for ANS X9.82.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[rng] Add ANS X9.82 Approved Hash_df derivation function
ANS X9.82 specifies several Approved derivation functions for use in
distributing entropy throughout a buffer. One such derivation
function is Hash_df, which can be implemented using the existing iPXE
SHA-1 functionality.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE exposes some extended capabilities via the PXE FILE API to allow
NBPs such as pxelinux to use protocols other than TFTP. Provide an
equivalent interface as a UEFI protocol so that EFI binaries may also
take advantage of iPXE's extended capabilities.
This can be used with a patched version of elilo, for example:
http://comments.gmane.org/gmane.comp.boot-loaders.elilo.general/147
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Practically speaking, it seems the convention is to only have one
packet pending and not rely upon any mechanism to associate returned
txbuf with txqueue.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This function never did much in this driver anyway, and after commit
b5ed30b2 ("[tg3] Fix compilation on newer gcc versions") it became
apparent that its remaining functionality could be easily moved to
tg3_test_dma().
Signed-off-by: Thomas Miletich <thomas.miletich@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[prefix] Delay initrd image copy until memory map is ready
initrd_init() calls umalloc() to allocate space for the initrd image,
but does so before hide_etherboot() has been called. It is therefore
possible for the initrd to end up overwriting iPXE itself.
Fix by converting initrd_init() from an init_fn to a startup_fn.
Originally-fixed-by: Till Straumann <strauman@slac.stanford.edu>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Replace the old Etherboot tg3 driver with a more up-to-date driver
using the iPXE API.
Signed-off-by: Thomas Miletich <thomas.miletich@gmail.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown