[libc] Redefine low 8 bits of error code as "platform error code"
The low 8 bits of an iPXE error code are currently defined as the
closest equivalent PXE error code. Generalise this scheme to
platforms other than PC-BIOS by extending this definition to "closest
equivalent platform error code". This allows for the possibility of
returning meaningful errors via EFI APIs.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Newer versions of bfd.h require definitions for the PACKAGE and
PACKAGE_VERSION macros used by autotools. Work around this by
manually defining these macros before including bfd.h.
Originally-fixed-by: Brandon Penglase <bpenglase-ipxe@spaceservices.net>
Tested-by: Brandon Penglase <bpenglase-ipxe@spaceservices.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[zbin] Fix size used for memset in alloc_output_file
The output->buf field is a pointer, not an array, so sizeof() is not
applicable. We must use the allocated string length instead.
Identified by gcc:
util/zbin.c: In function ‘alloc_output_file’:
util/zbin.c:146:37: warning: argument to ‘sizeof’ in ‘memset’ call
is the same expression as the destination; did you mean to
dereference it? [-Wsizeof-pointer-memaccess]
memset ( output->buf, 0xff, sizeof ( output->buf ) );
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[efi] Ensure EFI binaries comply with Authenticode requirements
Authenticode requires that the size of the raw file must equal the
size of the OptionalHeader.SizeOfHeaders plus the sum of all sections'
SizeOfRawData.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[util] Fix up checksum in UNDI ROM header, if present
The UNDI ROM header does contain a checksum byte. Apparently no-one
cares about this, since iPXE has left it as zero for years without
anyone noticing.
Since Option::ROM now understands the UNDI ROM header, we may as well
fix up the checksum byte for the sake of completeness.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[util] Allow for CALL NEAR in the option ROM initialisation entry point
Option::ROM currently understands only JMP NEAR and JMP SHORT
instructions in the initialisation entry point. At least one Broadcom
option ROM has been observed to use a CALL NEAR instruction.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[romprefix] Report a pessimistic runtime size estimate
PCI3.0 allows us to report a "runtime size" which can be smaller than
the actual ROM size. On systems that support PMM our runtime size
will be small (~2.5kB), which helps to conserve the limited option ROM
space. However, there is no guarantee that the PMM allocation will
succeed, and so we need to report the worst-case runtime size in the
PCI header.
Move the "shrunk ROM size" field from the PCI header to a new "iPXE
ROM header", allowing it to be accessed by ROM-manipulation utilities
such as disrom.pl.
Reported-by: Anton D. Kachalov <mouse@yandex-team.ru>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 196751c ("[build] Enable warnings when building utilities")
revealed a previously hidden compiler warning in util/nrv2b.c
regarding an out-of-bounds array subscript in the code
#if defined(SWD_BEST_OFF)
if (s->best_pos[2] == 0)
s->best_pos[2] = key + 1;
#endif
where best_pos[] is defined by
#define SWD_BEST_OFF 1
#if defined(SWD_BEST_OFF)
unsigned int best_off[ SWD_BEST_OFF ];
unsigned int best_pos[ SWD_BEST_OFF ];
#endif
With SWD_BEST_OFF set to 1, it can be proven that all code paths
referring to s->best_off[] and s->best_pos[] will never be executed,
with the exception of the two lines above. Since these two lines
alone can have no effect on execution, we can safely undefine
SWD_BEST_OFF.
Verified by comparing md5sums of bin/undionly.kpxe before and after
the change.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[romprefix] Add a dummy ROM header to cover the .mrom payload
The header of a .mrom image declares its length to be only a few
kilobytes; the remainder is accessed via a sideband mechanism. This
makes it difficult to append an additional ROM image, such as an EFI
ROM.
Add a second, dummy ROM header covering the payload portion of the
.mrom image, allowing consumers to locate any appended ROM images in
the usual way.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[util] Remove obsolete Makefile rule for util/prototester.c
util/prototester.c was removed in commit a6d1815 ("Obsolete for some
time now") back in 2006.
Signed-off-by: Marin Hannache <mareo@mareo.fr>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[util] Add utility to generate list of supported network cards
niclist.pl recursively scans specified source folders and builds a
list of supported NICs by looking for ISA_ROM and PCI_ROM lines and
outputs the list in text, CSV, JSON, HTML or DokuWiki format. Sorting
and column selection is possible.
The pci-utils pci.ids file is fetched from SourceForge once a day to
also output the "official" vendor/device names associated with the PCI
device.
Signed-off-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[console] Ignore unexpected keysyms when generating keyboard maps
I am unable to find any definitive documentation on how Linux keyboard
symbols work. In the absence of any documentation, I'm going to
assume that unexpected keysyms are harmless and should be ignored.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Include UNDI PCI driver within all-drivers build
Commit 9b99d2a ("[build] Avoid generating ROMs with "match-any" vendor
or device IDs") introduced a regression which caused the UNDI PCI
driver to be omitted from the list of all drivers, and thus to be
excluded from the all-drivers build.
Fix by ensuring that the per-driver section of the Makefile is
generated even when there are no ROMs to be built.
Reported-by: Sven Dreyer <sven@dreyer-net.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide a utility to quickly determine the ROM size and .mrom format
support for attached PCI devices. For example:
01:00.0 (1186:4300) supports a 128kB .rom or .mrom
Inspired-by: Wes Frazier <wes.frazier@members.fsf.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Avoid generating ROMs with "match-any" vendor or device IDs
A PCI_ROM() entry containing a vendor or device ID of PCI_ANY_ID
(0xffff) indicates to pci_find_driver() that the entry's vendor or
device ID should be ignored when matching against the device's vendor
or device ID. It does not represent a PCI ROM that should be built.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Include only one copy of each ROM in "make allroms"
Each PCI ROM currently ends up appearing twice in the $(ROMS) list:
once under its designated name (e.g. "rtl8139.rom"), once under its
PCI IDs (e.g. "bin/10ec8139.rom").
Include only the latter of these in the $(ROMS) list, so that doing
"make allroms" will generate only one copy of each ROM.
Reported-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[console] Try to avoid problems caused by keycode 86
The "us" keyboard layout contains a mapping for keycode 86 (which
seems not to correspond to any physical key on many US keyboards) to
the ASCII character '<'. This mapping causes conflicts with the
mapping for keycode 51, which also maps (with shift) to '<'.
Change the keyboard mapping generator to choose the lowest keycode for
each ASCII character as indicating the relevant mapping to use, on the
basis that a lower keycode roughly indicates a "more normal" key. On
a German keyboard, which has keys for both keycode 51 and keycode 86
present, this causes '<' to be remapped to ';', which is a closer
match to typical user expectations.
Reported-by: Sven Dreyer <sven@dreyer-net.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Inspired by LILO's keytab-lilo.pl, genkeymap.pl uses "loadkeys -b" to
obtain a Linux keyboard map, and generates a file keymap_xx.c in
hci/keymap.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Enhance the information collected by the function recorder to include
the call site and entry/exit counts. This allows fnrec.pl to produce
a call tree such as:
step (from core/getkey.c:46 = 0x17e90) {
ref_increment (from core/process.c:93 = 0x73ec) { }
net_step (from core/process.c:96 = 0x73f1) {
net_poll (from net/netdevice.c:741 = 0xbce6) {
netdev_poll (from net/netdevice.c:700 = 0xbc58) { }
netdev_rx_dequeue (from net/netdevice.c:709 = 0xbc65) { }
}
}
ref_decrement (from core/process.c:96 = 0x73f9) { }
}
Note that inlined functions are reported, confusingly, as extra calls
to the *containing* function. Minimise this confusion by adding the
attribute "no_instrument_function" to all functions declared as
inline. (Static functions that have been inlined autonomously by gcc
will still be problematic, but these are far fewer in number.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Currently, if elf2efi.c is compiled using a 32-bit HOST_CC, then the
resulting elf2efi64 binary will generate 32-bit EFI binaries instead
of 64-bit EFI binaries.
The problem is that elf2efi.c uses the MDE_CPU_* definitions to decide
whether to output a 32-bit or 64-bit PE binary. However, MDE_CPU_*
gets defined in ProcessorBind.h, depending on the compiler's target
architecture. Overriding them on the command line doesn't work in the
expected way, and you can end up in cases where both MDE_CPU_IA32 and
MDE_CPU_X64 are defined.
Fix by using a separate definition, EFI_TARGET_IA32/EFI_TARGET_X64,
which is specified only on the command line.
Signed-off-by: Geoff Lywood <glywood@vmware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Currently, if you attempt to build 64-bit EFI binaries on a 32-bit
system without a suitable cross-compiling version of libbfd, the iPXE
build will die with a segmentation fault in elf2efi64.
Fix by properly handling the return value from bfd_check_format().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[romprefix] Add .mrom format, allowing loading of large ROMs
Add an infrastructure allowing the prefix to provide an open_payload()
method for obtaining out-of-band access to the whole iPXE image. Add
a mechanism within this infrastructure that allows raw access to the
expansion ROM BAR by temporarily borrowing an address from a suitable
memory BAR on the same PCI card.
For cards that have a memory BAR that is at least as large as their
expansion ROM BAR, this allows large iPXE ROMs to be supported even on
systems where PMM fails, or where option ROM space pressure makes it
impossible to use PMM shrinking. The BIOS sees only a stub ROM of
approximately 3kB in size; the remainder (which can be well over 64kB)
is loaded only at the time iPXE is invoked.
As a nice side-effect, an iPXE .mrom image will continue to work even
if its PMM-allocated areas are overwritten between initialisation and
invocation.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Replace obsolete makerom.pl with quick script using Option::ROM
The only remaining useful function of makerom.pl is to correct the ROM
and PnP checksums; the PCI IDs are set at link time, and padding is
performed using padimg.pl.
Option::ROM already provides a facility for correcting the checksums,
so we may as well just use this instead.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a section .text16.early which is always kept inline with the
prefix. This will allow for some code sharing between the .prefix and
.text16 sections.
Note that the simple solution of just prepending the .prefix section
to the .text16 section will not work, because a bug in Wyse Streaming
Manager server (WLDRM13.BIN) requires us to place a dummy PXENV+ entry
point at the start of .text16.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The .xrom prefix provides an experimental mechanism for loading ROM
images greater than 64kB in size by mapping the expansion ROM BAR in
at a hopefully-unused address. This is unreliable, and potentially
dangerous. In particular, there is no guarantee that any PCI bridges
between the CPU and the device will respond to accesses for the
"unused" memory region that is chosen, and it is possible that the
process of scanning for the "unused" memory region may end up issuing
reads to other PCI devices. If this ends up trampling on a register
with read side-effects belonging to an unrelated PCI device, this may
cause undefined behaviour.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Access to the gpxe.org and etherboot.org domains and associated
resources has been revoked by the registrant of the domain. Work
around this problem by renaming project from gPXE to iPXE, and
updating URLs to match.
Also update README, LOG and COPYRIGHTS to remove obsolete information.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The function recorder is a crash and hang debugging tool. It logs each
function call into a memory buffer while gPXE runs. After the machine
is reset, and if the contents of memory have not been overwritten, gPXE
will detect the memory buffer and print out its contents.
This allows developers to see a trace of the last functions called
before a crash or hang. The util/fnrec.sh script can be used to convert
the function addresses back into symbol names.
To build with fnrec:
make FNREC=1
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Marty Connor <mdc@etherboot.org>
Debian based systems may have genisoimage(1) instead of mkisofs(1).
They are command-line compatible so the util/geniso script should be
able to choose either one.
This patch also changes the use of the mkisofs quiet (-q) flag to its
long form (-quiet). This should be compatible with more versions of
cdrtools and cdrkit.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Marty Connor <mdc@etherboot.org>
[prefix] Add .xrom prefix for a ROM that loads itself by PCI accesses
The standard option ROM format provides a header indicating the size
of the entire ROM, which the BIOS will reserve space for, load, and
call as necessary. However, this space is strictly limited to 128k for
all ROMs. gPXE ameliorates this somewhat by reserving space for itself
in high memory and relocating the majority of its code there, but on
systems prior to PCI3 enough space must still be present to load the
ROM in the first place. Even on PCI3 systems, the BIOS often limits the
size of ROM it will load to a bit over 64kB.
These space problems can be solved by providing an artificially small
size in the ROM header: just enough to let the prefix code (at the
beginning of the ROM image) be loaded by the BIOS. To the BIOS, the
gPXE ROM will appear to be only a few kilobytes; it can then load
the rest of itself by accessing the ROM directly using the PCI
interface reserved for that task.
There are a few problems with this approach. First, gPXE needs to find
an unmapped region in memory to map the ROM so it can read from it;
this is done using the crude but effective approach of scanning high
memory (over 0xF0000000) for a sufficiently large region of all-ones
(0xFF) reads. (In x86 architecture, all-ones is returned for accesses
to memory regions that no mapped device can satisfy.) This is not
provably valid in all situations, but has worked well in practice.
More importantly, this type of ROM access can only work if the PCI ROM
BAR exists at all. NICs on physical add-in PCI cards generally must
have the BAR in order for the BIOS to be able to load their ROM, but
ISA cards and LAN-on-Motherboard cards will both fail to load gPXE
using this scheme.
Due to these uncertainties, it is recommended that .xrom only be used
when a regular .rom image is infeasible due to crowded option ROM
space. However, when it works it could allow loading gPXE images
as large as a flash chip one could find - 128kB or even higher.
Signed-off-by: Marty Connor <mdc@etherboot.org>
[zbin] Fix 64-bit compilation warnings for util/zbin.c
Recent gcc versions generate more warnings when compiling util/zbin.c
on a 64-bit system:
util/zbin.c: In function `read_file':
util/zbin.c:85: warning: format `%d' expects type `int', but
argument 3 has type `size_t'
util/zbin.c:91: warning: format `%d' expects type `int', but
argument 3 has type `size_t'
util/zbin.c: In function `read_zinfo_file':
util/zbin.c:119: warning: format `%d' expects type `int', but
argument 4 has type `size_t'
util/zbin.c: In function `alloc_output_file':
util/zbin.c:134: warning: format `%d' expects type `int', but
argument 3 has type `size_t'
util/zbin.c: In function `process_zinfo_add':
util/zbin.c:244: warning: format `%d' expects type `int', but
argument 3 has type `size_t'
util/zbin.c:266: warning: format `%d' expects type `int', but
argument 7 has type `size_t'
util/zbin.c:286: warning: format `%#x' expects type `unsigned int',
but argument 7 has type `size_t'
util/zbin.c: In function `write_output_file':
util/zbin.c:348: warning: format `%d' expects type `int', but
argument 3 has type `size_t'
This patch eliminates these warnings.
Signed-off-by: Marty Connor <mdc@etherboot.org>
Recent gcc versions generate warnings when compiling util/zbin.c
( tested with gcc-4.3.3 ):
util/zbin.c: In function ‘process_zinfo_pack’:
util/zbin.c:200: warning: format ‘%#zx’ expects type ‘size_t’, but argument 6
has type ‘long unsigned int’
util/zbin.c: In function ‘process_zinfo_add’:
util/zbin.c:257: warning: format ‘%#lx’ expects type ‘long unsigned int’, but
argument 4 has type ‘int’
util/zbin.c:266: warning: format ‘%#lx’ expects type ‘long unsigned int’, but
argument 4 has type ‘int’
util/zbin.c:266: warning: format ‘%d’ expects type ‘int’, but argument 8 has
type ‘long unsigned int’
util/zbin.c:286: warning: format ‘%#lx’ expects type ‘long unsigned int’, but
argument 6 has type ‘int’
util/zbin.c:286: warning: format ‘%#lx’ expects type ‘long unsigned int’, but
argument 7 has type ‘size_t’
This patch eliminates these warnings.
Tested with gcc-4.3.3 on Ubuntu 9.04 and gcc-4.1.2 on Debian Etch.
Signed-off-by: Marty Connor <mdc@etherboot.org>
The mtools version check does not handle GNU mtools 4.0.10. This commit
makes the pattern more general so it matches older mtools as well as the
newer "mtools (GNU mtools) 4.0.10" string.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Marty Connor <mdc@etherboot.org>
A jump instruction starts at the third byte of an option ROM image, and
it is required that the bytes in the whole image add up to zero. To
achieve this, a checksum byte is usually placed after the jump. The jump
can be either a short jump (2 bytes, EB xx) or a near jump (3 bytes,
E9 xx xx). gPXE's romprefix.S uses a near jump, but modrom.pl assumed
a short jump, and clobbered the high byte of the offset. This caused
modrom-modified gPXE ROM images to crash the system during POST.
Fix by making modrom.pl place the checksum at byte 6, like makerom.pl does.
Signed-off-by: Marty Connor <mdc@etherboot.org>
[zbin] Change fixup semantics to support ROMs over 128k uncompressed
The option ROM header contains a one-byte field indicating the number
of 512-byte sectors in the ROM image. Currently it is linked to
contain the number of uncompressed sectors, with an instruction to the
compressor to correct it. This causes link failure when the
uncompressed size of the ROM image is over 128k.
Fix by replacing the SUBx compressor fixup with an ADDx fixup that
adds the total compressed output length, scaled as requested, to an
addend stored in the field where the final length value will be
placed. This is similar to the behavior of ELF relocations, and
ensures that an overflow error will not be generated unless the
compressed size is still too large for the field.
This also allows us to do away with the _filesz_pgh and _filesz_sect
calculations exported by the linker script.
Output tested bitwise identical to the old SUBx mechanism on hd, dsk,
lkrn, and rom prefixes, on both 32-bit and 64-bit processors.
Modified-by: Michael Brown <mcb30@etherboot.org>
Signed-off-by: Michael Brown <mcb30@etherboot.org>
Michael Brown