Replace the old via-rhine driver with a new version using the iPXE
API.
Includes fixes by Thomas Miletich for:
- MMIO access
- Link detection
- RX completion in RX overflow case
- Reset and EEPROM reloading
- CRC stripping
- Missing cpu_to_le32() calls
- Missing memory barriers
Signed-off-by: Adrian Jamróz <adrian.jamroz@gmail.com>
Modified-by: Thomas Miletich <thomas.miletich@gmail.com>
Tested-by: Thomas Miletich <thomas.miletich@gmail.com>
Tested-by: Robin Smidsrød <robin@smidsrod.no>
Modified-by: Michael Brown <mcb30@ipxe.org>
Tested-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Make "netX" settings block function as a symbolic link
Add a facility for settings blocks to act as symbolic links to other
settings blocks, and reimplement the "netX" virtual settings block
using this facility.
The primary advantage of this approach is that unscoped settings such
as ${mac} and ${filename} will now reflect the settings obtained from
the most recently opened network device: in most cases, this will mean
the settings obtained from the most recent DHCP attempt. This should
improve conformance to the principle of least astonishment.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Expose PCI configuration space via settings mechanism
Allow values to be read from PCI configuration space using the syntax
${pci/<busdevfn>.<offset>.<length>}
where <busdevfn> is the bus:dev.fn address of the PCI device
(expressed as a single integer, as returned by ${net0/busloc}),
<offset> is the offset within PCI configuration space, and <length> is
the length within PCI configuration space.
Values are returned in reverse byte order, since PCI configuration
space is little-endian by definition.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow network device's "busloc" setting to be formatted as a PCI
bus:dev.fn address using e.g. ${net0/busloc:busdevfn}.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[base16] Generalise base16_decode() to hex_decode()
Provide a generic hex_decode() routine which can be shared between the
Base16 code and the "hex" and "hexhyp" settings parsers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
RFC2560 mandates that a valid OCSP response will contain exactly one
relevant certificate. However, some OCSP responders include
extraneous certificates. iPXE currently assumes that the first
certificate in the OCSP response is the relevant certificate; OCSP
checks will therefore fail if the responder includes the extraneous
certificates before the relevant certificate.
Fix by using the responder ID to identify the relevant certificate.
Reported-by: Christian Stroehmeier <stroemi@mail.uni-paderborn.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[smbios] Allow access to multiple instances of SMBIOS structures
Extend the syntax for numerical SMBIOS settings from
smbios/<type>.<offset>.<length>
to
smbios/[<instance>.]<type>.<offset>.<length>
Where SMBIOS provides multiple structures with the same <type>, this
extended syntax allows for access to structures other than the first.
If <instance> is omitted then it will default to zero, giving access
to the first instance (and so matching existing behaviour).
The 16-bit SMBIOS handle (which is an alternative way to disambiguate
multiple instances of the same type of structure) can be accessed, if
required, using
smbios/<instance>.<type>.2.2:uint16
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Create an explicit concept of "settings scope" and eliminate the magic
values used for numerical setting tags.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[netdevice] Add netdev_tx_defer() to allow drivers to defer transmissions
Devices with small transmit descriptor rings may temporarily run out
of space. Provide netdev_tx_defer() to allow drivers to defer packets
for retransmission as soon as a descriptor becomes available.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
sparse does not understand -fshort-wchar. Default to using uint16_t
as a wchar_t if not explicitly specified by the compiler, to avoid
large numbers of spurious warnings from sparse.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
sparse does not define __WCHAR_TYPE__ or __WINT_TYPE__. We already
define __WCHAR_TYPE__ if the compiler does not do so; do the same for
__WINT_TYPE__.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Exploit the redefinition of iPXE error codes to include a "platform
error code" to allow for meaningful conversion of EFI_STATUS values to
iPXE errors and vice versa.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[libc] Redefine low 8 bits of error code as "platform error code"
The low 8 bits of an iPXE error code are currently defined as the
closest equivalent PXE error code. Generalise this scheme to
platforms other than PC-BIOS by extending this definition to "closest
equivalent platform error code". This allows for the possibility of
returning meaningful errors via EFI APIs.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Abstract out the ability to reboot the system to a separate reboot()
function (with platform-specific implementations), add an EFI
implementation, and make the existing "reboot" command available under
EFI.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[efi] Add our own EFI_LOAD_FILE_PROTOCOL implementation
When iPXE is used as a UEFI driver, the UEFI PXE base code currently
provides the TCP/IP stack, network protocols, and user interface.
This represents a substantial downgrade from the standard BIOS iPXE
user experience.
Fix by installing our own EFI_LOAD_FILE_PROTOCOL implementation which
initiates the standard iPXE boot procedure. This upgrades the UEFI
iPXE user experience to match the standard BIOS iPXE user experience.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[efi] Expose downloaded images via EFI_SIMPLE_FILE_SYSTEM_PROTOCOL
Expose iPXE's images as a UEFI file system, allowing the booted image
to access all images downloaded by iPXE.
This functionality is complementary to the custom iPXE download
protocol. The iPXE download protocol allows a booted image to utilise
iPXE to download arbitrary URIs, but requires the booted image to
specifically support the custom iPXE download protocol. The new
functionality limits the booted image to accessing only files that
were already downloaded by iPXE (e.g. as part of a script), but can
work with any generic UEFI image (e.g. the UEFI shell). Both
protocols are provided simultaneously, and are attached to the SNP
device handle.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tftp] Allow TFTP block size to be controlled via the PXE TFTP API
The PXE TFTP API allows the caller to request a particular TFTP block
size. Since mid-2008, iPXE has appended a "?blksize=xxx" parameter to
the TFTP URI constructed internally; nothing has ever parsed this
parameter. Nobody seems to have cared that this parameter has been
ignored for almost five years.
Fix by using xfer_window(), which provides a fairly natural way to
convey the block size information from the PXE TFTP API to the TFTP
protocol layer.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[netdevice] Add vlan_tag() to get the VLAN tag of a network device
The iBFT has a VLAN field that should be filled in. Add the
vlan_tag() function to extract the VLAN tag of a network device.
Since VLAN support is optional, define a weak function that returns 0
when iPXE is built without VLAN support.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tls] Concatenate received non-data records before processing
Allow non-data records to be split across multiple received I/O
buffers, to accommodate large certificate chains.
Reported-by: Nicola Volpini <Nicola.Volpini@kambi.com>
Tested-by: Nicola Volpini <Nicola.Volpini@kambi.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Adrian Jamróz