monojob_wait() was holding a reference to the completed job, meaning that
various objects would not be freed until the next job was plugged in to
the monojob interface.

The userptr_t is now the fundamental type that gets used for conversions.
For example, virt_to_phys() is implemented in terms of virt_to_user() and
user_to_phys().

The EFI timer runs at one tick per second, so using ">" rather than ">="
results in a two-second gap between dots.

We now have two implementations for the timer API: one using the
time-of-day counter at 40:70 and one using RDTSC.  Both make use of
timer2_udelay().

Using start==0 to indicate a stopped timer is dangerous, because 0 is a
valid value for the current tick counter.

The copy_{to,from}_phys() functions were obsoleted long ago by
copy_{to,from}_user().

relocate_to() also disappeared some time ago.

-Wformat-nonliteral is not enabled by -Wall and needs to be explicitly
 specified.

Modified the few files that use nonliteral format strings to work with
this new setting in place.

Inspired by a patch from Carl Karsten <carl@personnelware.com> and an
identical patch from Rorschach <r0rschach@lavabit.com>.

The intention is to include near-verbatim copies of the EFI headers
required by gPXE.  This is achieved using the import.pl script in
src/include/gpxe/efi.

Note that import.pl will modify any #include lines in each imported
header to reflect its new location within the gPXE tree.  It will also
tidy up the file by removing carriage return characters and trailing
whitespace.

Reduce the number of sections within the linker script to match the
number of practical sections within the output file.

Define _section, _msection, _esection, _section_filesz, _section_memsz,
and _section_lma for each section, replacing the mixture of symbols that
previously existed.

In particular, replace _text and _end with _textdata and _etextdata, to
make it explicit within code that uses these symbols that the .text and
.data sections are always treated as a single contiguous block.

Undefined symbols shouldn't reach sortobjdump.pl, but if they do then it
is not a helpful place to report the error.

Allow for the build CPU architecture and platform to be specified as part
of the make command goals.  For example:

  make bin/rtl8139.rom      # Standard i386 PC-BIOS build

  make bin-efi/rtl8139.efi  # i386 EFI build

The generic syntax is "bin[-[arch-]platform]", with the default
architecture being "i386" (regardless of the host architecture) and the
default platform being "pcbios".

Non-path targets such as "srcs" can be specified using e.g.

  make bin-efi srcs

Note that this changeset is merely Makefile restructuring to allow the
build architecture and platform to be determined by the make command
goals, and to export these to compiled code via the ARCH and PLATFORM
defines.  It doesn't actually introduce any new build platforms.

The arch/i386/Config file has long been marked as deprecated.  Move all
the pertinent bits to arch/i386/Makefile instead and remove
arch/i386/Config.

gcc defines the magic __WCHAR_TYPE__ macro, in order to convey
information about whether or not the user selected -fshort-wchar.

Some devices (e.g. the Atmel AT24C11) have no concept of a device
address; they respond to every device address and use this value as
the word address.  Some other devices use part of the device address
field to extend the word address field.

Generalise the i2c bit-bashing support to handle this by defining the
device address length and word address length as properties of an i2c
device.  The word address is assumed to overflow into the device
address field if the address used exceeds the width of the word
address field.

Also add a bus reset mechanism.  i2c chips don't usually have a reset
line, so rebooting the host will not clear any bizarre state that the
chip may be in.  We reset the bus by clocking SCL until we see SDA
high, at which point we know we can generate a start condition and
have it seen by all devices.  We then generate a stop condition to
leave the bus in a known state prior to use.

Finally, add some extra debugging messages to i2c_bit.c.

Some older versions of gcc don't complain about unknown compiler flags
unless you ask them to actually compile; asking them to merely
preprocess won't trigger the error.

Fix the -fno-stack-protector test by making it attempt to compile an
empty file, rather than preprocess an empty file.

The usefulness of DBGLVL_IO is limited by the fact that many cards
require large numbers of uninteresting I/O reads/writes at device
probe time, typically when driving a bit-bashing I2C/SPI bus to read
the MAC address.

This patch adds the DBG_DISABLE() and DBG_ENABLE() macros, which can
be used to temporarily disable and re-enable selected debug levels.
Note that debug levels must still be enabled in the build in order to
function at all: you can't use DBG_ENABLE(DBGLVL_IO) in an object
built with DEBUG=object:1 and expect it to do anything.

[] are shell metacharacters, and they can get confused by files in the
local directory.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

?= in a Makefile means that that variable can be overridden by the
environment.  This is confusing to users, especially with a generic
name like "ARCH".

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Reported working by Martin Kreiner <m.kreiner@levigo.de>