The everything target builds multiple image types on each supported
arch/platform combination.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Properly handle multiple goals per BIN directory
When building multiple targets per BIN with multiple jobs, for
example:
make -j16 bin-i386-efi/ipxe.efi{,drv,rom} bin-x86_64-efi/ipxe.efi{,drv,rom}
we would invoke a make subprocess for each goal in parallel resulting
in multiple makes running in a single BIN directory. Fix by grouping
goals per BIN directory and invoking only one make per BIN. It is
both safer and faster.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
pcbios specific get_memmap() is used by the b44 driver making
all-drivers builds fail on other platforms. Move it to the I/O API
group and provide a dummy implementation on EFI.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "dhcp" command now accepts a list of interfaces to try until one
succeeds. For example:
iPXE> dhcp net0 net1 net2
If no interfaces are specified, all interfaces will be tried.
Note that interfaces that fail to DHCP are closed in order to avoid
memory exhaustion. This behavior differs from the previous "dhcp"
command implementation but should not affect any existing scripts
since a "dhcp" command failure would in any case cause the script to
abort.
Originally-implemented-by: Lars Kellogg-Stedman <lars@oddbit.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
COM32 binaries generally expect to run with interrupts
enabled. Syslinux does so, and COM32 programs will execute cli/sti
pairs when running a critical section, to provide mutual exclusion
against BIOS interrupt handlers. Previously, under iPXE, the IDT was
not valid, so any interrupt (e.g. a timer tick) would generally cause
the machine to triple fault.
This change introduces code to:
- Create a valid IDT at the same location that syslinux uses
- Create an "interrupt jump buffer", which contains small pieces of
code that simply record the vector number and jump to a common
handler
- Thunk down to real mode and execute the BIOS's interrupt handler
whenever an interrupt is received in a COM32 program
- Switch IDTs and enable/disable interrupts when context switching to
and from COM32 binaries
Testing done:
- Booted VMware ESX using a COM32 multiboot loader (mboot.c32)
- Built with GDBSERIAL enabled, and tested breakpoints on int22 and
com32_irq
- Put the following code in a COM32 program:
asm volatile ( "sti" );
while ( 1 );
Before this change, the machine would triple fault
immediately. After this change, it hangs as expected. Under Bochs,
it is possible to see the interrupt handler run, and the current
time in the BIOS data area gets incremented.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[forcedeth] Replace driver with native iPXE driver
This patch adds a native iPXE forcedeth driver and removes the legacy
Etherboot forcedeth driver. It supports 40 different chips, compared
to the original 14.
It has been tested on a NIC with an CK804 Ethernet Controller, and the
results of downloading 5 100mb images in a row have been:
12/11/11/11/11 seconds; booting DSL using pxelinux also succeeded. The
driver has also been tested by chaining undionly.kpxe and it worked.
Signed-off-by: Andrei Faur <da3drus@gmail.com>
Tested-by: Andrei Faur <da3drus@gmail.com>
Tested-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[string] Use 64-bit registers in assembly memswap() on x86_64
An assembly version of memswap() is in an x86 word-length-agnostic
header file, but it used 32-bit registers to store pointers, leading
to memory errors responding to ARP queries on 64-bit systems.
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When we received an encrypted packet, after replacing it with its
decrypted version and freeing the encrypted original, we would
continue to look at the header of the now-freed original packet. Fix
by moving the header pointer to point at the decrypted packet instead.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The workhorse function for detecting 802.11 security was still named
_sec80211_detect(), a holdover from the old style of weak function
handling, with the result that all networks would be identified as
"unknown".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Currently, if elf2efi.c is compiled using a 32-bit HOST_CC, then the
resulting elf2efi64 binary will generate 32-bit EFI binaries instead
of 64-bit EFI binaries.
The problem is that elf2efi.c uses the MDE_CPU_* definitions to decide
whether to output a 32-bit or 64-bit PE binary. However, MDE_CPU_*
gets defined in ProcessorBind.h, depending on the compiler's target
architecture. Overriding them on the command line doesn't work in the
expected way, and you can end up in cases where both MDE_CPU_IA32 and
MDE_CPU_X64 are defined.
Fix by using a separate definition, EFI_TARGET_IA32/EFI_TARGET_X64,
which is specified only on the command line.
Signed-off-by: Geoff Lywood <glywood@vmware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tcp] Allow out-of-order receive queue to be discarded
Allow packets in the receive queue to be discarded in order to free up
memory. This avoids a potential deadlock condition in which the
missing packet can never be received because the receive queue is
occupying all of the memory available for further RX buffers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a facility allowing cached data to be discarded in order to
satisfy memory allocations that would otherwise fail.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Maintain a queue of received packets, so that lost packets need not
result in retransmission of the entire TCP window.
Increase the TCP window to 8kB, in order that we can potentially
transmit enough duplicate ACKs to trigger Fast Retransmission at the
sender.
Using a 10MB HTTP download in qemu-kvm with an artificial drop rate of
1 in 64 packets, this reduces the download time from around 26s to
around 4s.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[netdevice] Provide a test mechanism for discarding packets at random
Setting NETDEV_DISCARD_RATE to a non-zero value will cause one in
every NETDEV_DISCARD_RATE packets to be discarded at random on both
the transmit and receive datapaths, allowing the robustness of
upper-layer network protocols to be tested even in simulation
environments that provide wholly reliable packet transmission.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[virtio] Replace virtio-net with native iPXE driver
This patch adds a native iPXE virtio-net driver and removes the legacy
Etherboot virtio-net driver. The main reasons for doing this are:
1. Multiple virtio-net NICs are now supported by iPXE. The legacy
driver kept global state and caused issues in virtual machines with
more than one virtio-net device.
2. Faster downloads. The native iPXE driver downloads 100 MB over
HTTP in 12s, the legacy Etherboot driver in 37s. This simple
benchmark uses KVM with tap networking and the Python
SimpleHTTPServer both running on the same host.
Changes to core virtio code reduce vring descriptors to 256 (QEMU uses
128 for virtio-blk and 256 for virtio-net) and change the opaque token
from u16 to void*. Lowering the descriptor count reduces memory
consumption. The void* opaque token change makes driver code simpler.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The new errdb error code database is more accurate than the regular
expression-based errcode scripts. This patch removes errcode scripts
in favor of errdb.
The gpxebot.py script is no longer needed, gpxebot has been released
as a separate open source codebase:
http://git.etherboot.org/?p=people/stefanha/gpxebot.git;a=summary
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[settings] Unregister the children when unregistering the parent
The DHCP settings registered as a child of the netdevice settings are
not unregistered anywhere. This prevents the netdevice from being
freed on shutdown.
Fix by automatically unregistering any child settings when the parent
settings are unregistered.
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tcp] Treat ACKs as sent only when successfully transmitted
iPXE currently forces sending (i.e. sends a pure ACK even in the
absence of fresh data to send) only in response to packets that
consume sequence space or that lie outside of the receive window.
This ignores the possibility that a previous ACK was not actually sent
(due to, for example, the retransmission timer running).
This does not cause incorrect behaviour, but does cause unnecessary
retransmissions from our peer. For example:
1. Peer sends final data packet (ack 106 seq 521..523)
2. We send FIN (seq 106..107 ack 523)
3. Peer sends FIN (ack 106 seq 523..524)
4. We send nothing since retransmission timer is running for our FIN
5. Peer ACKs our FIN (ack 107 seq 524..524)
6. We send nothing since this packet consumes no sequence space
7. Peer retransmits FIN (ack 107 seq 523..524)
8. We ACK peer's FIN (seq 107..107 ack 524)
What should happen at step (6) is that we should ACK the peer's FIN,
since we can deduce that we have never sent this ACK.
Fix by maintaining an "ACK pending" flag that is set whenever we are
made aware that our peer needs an ACK (whether by consuming sequence
space or by sending a packet that appears out of order), and is
cleared only when the ACK packet has been transmitted.
Reported-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[tcp] Use a dedicated timer for the TIME_WAIT state
iPXE currently repurposes the retransmission timer to hold the TCP
connection in the TIME_WAIT state (i.e. waiting for up to 2*MSL in
case we are required to re-ACK our peer's FIN due to a lost ACK).
However, the fact that this timer is running will prevent such an ACK
from ever being sent, since the logic in tcp_xmit() assumes that a
running timer indicates that we ourselves are waiting for an ACK and
so blocks the transmission. (We always wait for an ACK before sending
our next packet, to keep our transmit data path as simple as
possible.)
Fix by using an entirely separate timer for the TIME_WAIT state, so
that packets can still be sent.
Reported-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Speed up rebuilding on header file changes
Split src_template into deps_template (which handles the definition of
foo_DEPS) and rules_template (which handles the rules referencing
foo_DEPS). The rules_template is not affected by any included header
files and so does not need to be reprocessed following a change to an
included header file.
This reduces the time required to rebuild the Makefile rules following
a change to stdint.h by around 45%, at a cost of increasing the time
required to rebuild after a "make veryclean" by around 3%.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Avoid unnecessary "rm" and "touch" in dependency generation
Speed up dependency generation by omitting the totally unnecessary
"rm" and "touch" commands. This reduces the time taken to generate
dependencies by around 6%.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Weak functions whose visibility is hidden may be inlined due to a bug
in GCC. Explicitly mark weak functions noinline to work around the
problem.
This makes the PXE_MENU config option work again, the PXE boot menu
was never being called because the compiler inlined a weak stub
function.
The GCC bug was identified and fixed by Richard Sandiford
<rdsandiford@googlemail.com> but in the meantime iPXE needs to
implement a workaround.
Reported-by: Steve Jones <steve@squaregoldfish.co.uk>
Reported-by: Shao Miller <shao.miller@yrdsb.edu.on.ca>
Suggested-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[hci] Continue processing while prompting for shell banner
Continue calling step() while displaying the shell banner. This
potentially allows TCP connections to close gracefully after a failed
boot attempt.
Inspired-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[debug] Expose pause() and more() debugging functions
Include the pause() and more() debugging functions within the general
iPXE debugging framework, by introducing DBGxxx_PAUSE() and
DBGxxx_MORE() macros.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
putline() was introduced back in 2007 for a feature that was never
committed. No console driver implements it and no code calls it, so
remove it from struct console_driver.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Every other scalar integer value in struct tcp_connection is in host
byte order; change the definition of local_port to match.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
image_set_cmdline() strdup()s cmdline, which free_image() doesn't
clean up.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This bug caused .probe to fail because the NIC did not reset properly.
Signed-off-by: Andrei Faur <da3drus@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add NonVolatile Option (nvo) and NonVolatile Storage (nvs) support to
the myri10ge driver using the EEPROM read/write mechanism provided by
the NIC's Vendor Specific PCI capability.
The myri10ge NIC is capabile of storing 64KB or more of nonvolatile
options, but this patch advertises only 512 bytes of nvo storage
because iPXE malloc's a buffer matching the total size we advertise.
512 is plenty without wasting malloc'd memory. (The 2 other drivers
currently supporting nvo advertise 256 bytes or less.)
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Make Ctrl-D delete a setting, because the Text User Interface (tui)
previously provided no way to delete a setting. Also, update the
on-screen instructions to describe the new feature. Deleting settings
is especially important for settings stored in precious nonvolatile
storage.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Implement jump scrolling with "..." displayed where the settings list
continues off-screen, because there are now too many settings to fit
on screen in the "config ..." text user interface.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a PCI_CAP_ID_VNDR definition for the PCI standard "Vendor
Specific" capability ID.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The existence and usage of the BEV entry point is covered by the PnP
spec, not the BBS spec; the BBS spec merely describes a policy for
selecting the boot device order. iPXE should therefore check only for
a PnP BIOS in order to decide whether or not to hook INT19.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Fix broken build caused by implied dependency upon "perl"
Commit ea12dc0 ("[build] Avoid hard-coding the path to perl")
introduced a build failure for fully clean trees (e.g. after running
"make veryclean"), since the dependency upon $(PARSEROM) now includes
a dependency upon "perl" (which doesn't exist) rather than upon
"/usr/bin/perl" (which does exist).
There should of course be no dependency upon the perl binary at all;
the dependency should be upon "./util/parserom.pl" alone.
Fix by removing the $(PERL) from the definition of Perl-based utility
paths, and adding $(PERL) at the point of usage.
Reported-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The path "/usr/bin/perl" has been hard-coded since Etherboot 5.1, for
no discernible reason. Use just "perl" instead to fix the
inconsistency and allow building on systems with Perl installed
outside of /usr/bin.
Reported-by: Gabor Z. Papp <gzp@papp.hu>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown