[libc] Avoid implicit assumptions about potentially-optimised memcpy()
Do not assume that an architecture-specific optimised memcpy() will
have the same properties as generic_memcpy() in terms of handling
overlapping regions.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[image] Skip misleading "format not recognised" error message
Return success (rather than failure) after an image format has been
correctly identified.
This has no practical effect, since the return value from
image_probe() is deliberately never used, but avoids a somewhat
surprising and misleading "format not recognised" error message when
debugging is enabled.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[libc] Print "<NULL>" for wide-character NULL strings
The existing code intends to print NULL strings as "<NULL>" (for the
sake of debug messages), but the logic is incorrect when handling
wide-character strings. Fix the logic and add applicable unit tests.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[pcbios] Restrict external memory allocations to the low 4GB
When running the 64-bit BIOS version of iPXE, restrict external memory
allocations to the low 4GB to ensure that allocations (such as for
initrds) fall within our identity-mapped memory region, and will be
accessible to the potentially 32-bit operating system.
Move largest_memblock() back to memtop_umalloc.c, since this change
imposes a restriction that applies only to BIOS builds.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[iobuf] Improve robustness of I/O buffer allocation
Guard against various corner cases (such as zero-length buffers, zero
alignments, and integer overflow when rounding up allocation lengths
and alignments) and ensure that the struct io_buffer is correctly
aligned even when the caller requests a non-zero alignment for the I/O
buffer itself.
Add self-tests to verify that the resulting alignments and lengths are
correct for a range of allocations.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit f3fbb5f ("[malloc] Avoid integer overflow for excessively large
memory allocations") fixed signed integer overflow issues caused by
the use of ssize_t, but did not guard against unsigned integer
overflow.
Add explicit checks for unsigned integer overflow where needed. As a
side bonus, erroneous calls to malloc_dma() with an (illegal) size of
zero will now fail cleanly.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The various early-exit paths in parse_uri() accidentally bypass the
URI field decoding. The result is that opaque or relative URIs do not
undergo URI field decoding, resulting in double-encoding when the URIs
are subsequently used. For example:
#!ipxe
set mac ${macstring}
imgfetch /boot/by-mac/${mac:uristring}
would result in an HTTP GET such as
GET /boot/by-mac/00%253A0c%253A29%253Ac5%253A39%253Aa1 HTTP/1.1
rather than the expected
GET /boot/by-mac/00%3A0c%3A29%3Ac5%3A39%3Aa1 HTTP/1.1
Fix by ensuring that URI decoding is always applied regardless of the
URI format.
Reported-by: Andrew Widdersheim <awiddersheim@inetu.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
TFTP URIs are intrinsically problematic, since:
- TFTP servers may use either normal slashes or backslashes as a
directory separator,
- TFTP servers allow filenames to be specified using relative paths
(with no initial directory separator),
- TFTP filenames present in a DHCP filename field may use special
characters such as "?" or "#" that prevent parsing as a generic URI.
As of commit 7667536 ("[uri] Refactor URI parsing and formatting"), we
have directly constructed TFTP URIs from DHCP next-server and filename
pairs, avoiding the generic URI parser. This eliminated the problems
related to special characters, but indirectly made it impossible to
parse a "tftp://..." URI string into a TFTP URI with a non-absolute
path.
Re-introduce the convention of requiring an extra slash in a
"tftp://..." URI string in order to specify a TFTP URI with an initial
slash in the filename. For example:
tftp://192.168.0.1/boot/pxelinux.0 => RRQ "boot/pxelinux.0"
tftp://192.168.0.1//boot/pxelinux.0 => RRQ "/boot/pxelinux.0"
This is ugly, but there seems to be no other sensible way to provide
the ability to specify all possible TFTP filenames.
A side-effect of this change is that format_uri() will no longer add a
spurious initial "/" when formatting a relative URI string. This
improves the console output when fetching an image specified via a
relative URI.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some BIOS console redirection capabilities do not work well with the
colourised debug messages used by iPXE. We already allow the range of
colours to be controlled via the DBGCOL=... build parameter. Extend
this syntax to allow DBGCOL=0 to be used to mean "disable colours".
Requested-by: Wissam Shoukair <wissams@mellanox.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[downloader] Update image URI in response to a redirection
Update the image's recorded URI when a download redirection occurs.
This ensures that URIs relative to a redirected download are resolved
correctly.
In particular, this allows for the use of relative URIs in scripts
that are themselves downloaded via a redirection, such as the HTTP 301
redirection used to fix up URIs pointing to directories but omitting
the trailing slash (e.g. "http://boot.ipxe.org/demo", which will be
redirected to "http://boot.ipxe.org/demo/").
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Merge the functionality of parse_next_server_and_filename() and
tftp_uri() into a single pxe_uri(), which takes a server address
(IPv4/IPv6/none) and a filename, and produces a URI using the rule:
- if the filename is a hierarchical absolute URI (i.e. includes a
scheme such as "http://" or "tftp://") then use that URI and ignore
the server address,
- otherwise, if the server address is recognised (according to
sa_family) then construct a TFTP URI based on the server address,
port, and filename
- otherwise fail.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 09b057c ("[settings] Remove "uristring" setting type") removed
support for URI-encoded settings via the "uristring" setting type, on
the basis that such encoding was no longer necessary to avoid problems
with the command line parser.
Other valid use cases for the "uristring" setting type do exist: for
example, a password containing a '/' character expanded via
chain http://username:${password:uristring}@server.name/boot.php
Restore the existence of the "uristring" setting, avoiding the
potentially large stack allocations that were used in the old code
prior to commit 09b057c ("[settings] Remove "uristring" setting
type").
Requested-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[image] Detect image type when image is first registered
The current usage pattern of image_probe() is a legacy from the time
before commit 34b6ecb ("[image] Simplify image management") when
loading an image to its executable location in memory was a separate
action from actually executing the image.
Call image_probe() as soon as an image is registered. This allows
"imgstat" to display image type information for all images and allows
image-consuming code to assume that image->type is already set
correctly.
Ignore failures if image_probe() does not recognise the image, since
we do expect to handle unrecognised images (initrds, modules, etc).
Unrecognised images will be left with a NULL image->type, which
image-consuming code can easily check.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[test] Allow self-tests to report exit status when running under Linux
Allow the return status from an embedded image to propagate out to the
eventual return status from main(). When running under Linux, this
allows the pass/fail result of unit tests to be observable without
having to visually inspect the console output.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[serial] Check for UART existence in uart_select()
Check for existence of the UART in uart_select(), not just in
uart_init(). This allows uart_select() to refuse to set a non-working
address in uart->base, which in turns means that the serial console
code will not attempt to use a non-existent UART.
Reported-by: Torgeir Wulfsberg <Torgeir.Wulfsberg@kongsberg.com>
Reported-by: Ján ONDREJ (SAL) <ondrejj@salstar.sk>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow line buffer to accumulate multiple lines, with buffered_line()
returning each freshly-completed line as it is encountered. This
allows buffered lines to be subsequently processed as a group.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[build] Fix compiler warnings on some gcc versions
xfer_buffer() uses intf_get_dest_op() to obtain the destination
interface for xfer_deliver(), in order to check that this is the same
interface which provides xfer_buffer(). The return value from
intf_get_dest_op() (which contains the actual method implementing
xfer_deliver()) is not used.
On some gcc versions, this triggers a "value computed is not used"
warning, since the explicit type cast included within the
intf_get_dest_op() macro is treated as a "value computed".
Fix by explicitly casting the result of intf_get_dest_op() to void.
Reported-by: Matthew Helton <mwhelton@gmail.com>
Reported-by: James A. Peltier <jpeltier@sfu.ca>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Reduce the cost of implementing object methods which convey no
information beyond the fact that the method has been called.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[fault] Add inject_corruption() to randomly corrupt data
Provide an inject_corruption() function that can be used to randomly
corrupt data bytes with configurable probabilities.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide a generic inject_fault() function that can be used to inject
random faults with configurable probabilities.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[base16] Add buffer size parameter to base16_encode() and base16_decode()
The current API for Base16 (and Base64) encoding requires the caller
to always provide sufficient buffer space. This prevents the use of
the generic encoding/decoding functionality in some situations, such
as in formatting the hex setting types.
Implement a generic hex_encode() (based on the existing
format_hex_setting()), implement base16_encode() and base16_decode()
in terms of the more generic hex_encode() and hex_decode(), and update
all callers to provide the additional buffer length parameter.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
[legal] Relicense files under GPL2_OR_LATER_OR_UBDL
Relicense files with kind permission from
Stefan Hajnoczi <stefanha@redhat.com>
alongside the contributors who have already granted such relicensing
permission.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown